The Unusual Case of The Invisible Font.

Strange problem with AppleCasual font. I used it not too long ago. Today I go to access it and it is not listed in the font list. So...I go into Font Book and there it is, active and listed. I make sure that there is no problem with it and validate the font. FB says "Super, no problem", so I close FB, restart and still no font. All other fonts are available, just not this one. So...I moved the font from my use folder to the library for the system. Still doesn't show up.
I do a search from the Finder for the words "casual", "Applecasual" and it won't be found. However, I go to the fonts folder (Mac:library folder) and there it is.
I by now assuming there is something wrong with it anyway. Go to my installation disk — font can't be found on it. Go to the Apple site and search for the font — not found.
So I am stuck. Anyone have any idea what the problem is?
Thanks,
Richard

Ah, I see. Didn't know there was another library —
in the System folder. I checked there and no font in
there but found other components including Ink.
I don't think you understood the notation being used. You might want to learn how it works, in case you face a similar issue in the future:
System/Library/Components/Ink.component/Contents/SharedSupport/InkServer.app/Con tents/Resources/Apple Casual.dfont
Means that the actions you take are the following: Open System Folder, Open Components Folder, Open Ink.component folder, Open Contents Folder, Open SharedSupport Folder, Do Control + Click on InkServer.app and select "show package contents", Open Contents folder, Open Resources folder, find Apple Casual.dfont.

Similar Messages

Will the iPhone case affects the camera and quality of photos?

I really want to know if the case in the iPhones might affect the quality of the photo. Thus, what is the best case that suits best for the iPhone 5s?

no they will not its about how you take photo and sometimes low lighting can also be the problem andd theres really no best case but my oppion is the best cases are the thick rubber cases so it will stick to your pants if your lets say sitting down and the thickness will add protection to falls

How can replace the aluminum case of the mac book air and how much would cost?

How can I replace a mac book air aluminum case and how much would it cost?

The entire case, meaning the back, front, and display enclosure? As much as a new MBA.

The back case of the ipod

ok so i was given a used ipod nano and i was cleeaning it off and it looks liike the back cover is semi coming off. Is there a way to take it off and re put it on??? If so please let me kno

Most likely, the Clips that hold the back case to the Ipod Broke in some places. TO take it off u can just use a spudger or if ur brave enough a flathead screwdriver.
http://www.ifixit.com/Guide/iPod/iPod-Nano-1st-Gen-/Rear-Panel/97/1/

How to execute a VI such that the false case of the VI should not work in each iteration

I 'am posting One vI. In this if I put a while loop, I don't need the false case of the case loop to iterate. When I press the button on, the true case should execute. This is my interntion can you please help me
Attachments:
sequence post-case for selection.vi ‏25 KB

Your VI has 5 case structures, which one are you talking about?
There is no while loop, please explain what you mean. Where do you want to place one?
I don't know what a "case loop" is. Can you explain?
Again, you have 5 buttons. Which one do you press?
One big problem is that your Visa resource is not wired across some of the cases, thus losing it for the remainder of the code.
Please explain what the code is supposed to do, how it should be operated, and what you expect to happen. Thanks!
LabVIEW Champion . Do more with less code and in less time .

Does the 5s use the same case as the 5?

Does anyone know if the 5s uses the same cases as the 5? Just trying to get a head start.:-}

The 5 and the 5S have essentially the same physical configurations in termns of size, so yes, in most instances a case designed for the 5 should work on the 5s.

Will the old cases fit the ipod touch 5 generation?

if someone could tell me if the old cases fit the new ipod touch i would be very grateful!!

No. The 5G is taller than previous iPods.
iPod touch 5g cases: Apple Support Communities
5th Generation iPod touch cases / accessories | Jeffs iWeb Blog

What is the best case for the iPhone 5c

What is the best iPhone 5c case?

The Apple ones look quite slick and quite fashionable aswell as stylish and cool.

The Strange Case of the Empty Folder

For several days, I have been chasing gremlins, some of my own making. But this one is different.
Suddenly, when choosing a filter that requires time to load the thumb preview, I found it very slow, but even more to the point, I lost control of the curser. It became very small, not even an arrow and jumped around the screen, if it moved at all. The preview load was taking forever, so I tried to dump it. No dice. I had to use kill Process, if I could even get there.
So gremlins are now extending to the video card, right? Maybe too much ram to PS. Nope.
Anyway, after a lot of mucking around with this or that, it occurred to me that the Hard Drive light didn't work while all this is going on. Not writing to Scratch? Let's look. Yep, scratch has data. So I opened it and found two files, one the PS file and the other some strange temp file with a long string of numbers. Properties said -0- data.
After some deliberation, I decided to exit PS and delete the strange file. I reopened PS and voila! All is well! Smooth fast preview thumbs, cursor runs, I could exit the filter no problems.
So, I guess the moral here is if strange things are happening, check scratch! Even an empty one seems anathema to PS.
Hmmm, maybe it was of my own making. Who or what put it there?
Curious people want to know.

Thank you for the detailed "how to". Much appreciated!
Hudechrome wrote:
Generate a shortcut using Ctrl-Alt-Shift+B
Note: Doing so produced the message "Alt+Shift+Ctrl+B is already in use and will be removed from Image > Adjustments > Black & White if accepted." I chose [Accept and Go To Conflict], and left the Black & White feature with no shortcut.
I initially generated a 16000 x 11000 pixel file, RGB Color, 8 bit, containing White.
Running the filter via the 4 key shortcut popped up a Progress dialog that ran for a minute or so. All the while cursor motion was completely smooth. Task Manager showed about 70% processor utilization across the 8 cores.
The cursor would change to an arrow while over the dialog, then to the spinning wheel when off it.
Once the operation completed, the dialog disappeared and the cursor returned to whatever tool I had selected (zoom, move, etc.) and was smooth and normal.
I tried it several times, with 8 bits/channel and 16 bis/channel images, even with images much larger than 500 MB. With larger images in 16 bits/channel mode I did see some slight jumpiness in the cursor motion while the Progress bar was up, but only very slight.
It appears that the thread in Photoshop that reloads the cursor is a bit delayed in running by the app being busy processing the long operation on the large image. Cursor motion was normal and smooth in all other apps and music I was playing through Media Player was not interrupted. Task Manager again showed about 70% processor utilization across the 8 cores.
And there were no problems whatsoever after the operation had completed.
I'm thinking you may have a glitch in your nVidia display driver having something to do with reloading cursors from within your app.
Regarding the button changing captions from Cancel to Reset, I did not ever see that in the testing above... However, it's a known feature that many Photoshop dialogs with a [Cancel] button will change it to [Reset] instead if the Alt key is held down. If Photoshop is switched away from via the Alt-Tab key combination, then it will stick that way until Photoshop is again made active. An easy way to demonstrate this is to go into Edit - Preferences - any subcategory, then press Alt. Activate another running application via Alt-Tab and move it out of the way (so you can still see the Photoshop dialog) and you'll see it stay that way until you re-activate Photoshop.
I'm not sure in what way this is related to the glitch you're seeing, if at all, but it does represent another case where I see [Cancel] change to [Reset].
-Noel
P.S., It occurs to me to ask: Have you changed your Cache Tile Size in Edit - Preferences - Performance?

I question for the people's out there who have the silicone case for the Micro, aka Rhino Sk

I have the silicone case too, aka Rhino skin.
what i was wondering, do you us the black belt clip that comes with it's
the reason i ask is because i used it once just to try it out. it seems like when ever you press down on it so you can clip it to your side, It's like it is putting to much pressure on the micro battery cover. what do you think? do you use you belt clip that came with your silicone case?
also i ended up with some fresh scratches.
do you use your belt clip that came with your rhino case?

Umm, well, I have a silicone case, but it didn't come with a belt clip, unless your talking about the hardcase that came with the micro.
If that's what your'e reffering to, no, I don't do that. I tried putting it in after it was in the silicone case, but once I saw that it didn't fit in directly and that I would have to add pressure, I didn't bother. I keep my Zen Micro in the silicone case, and then I put them in an altoids box. I have some soft cusion thingy on the inside of the lid so that my screen won't scrath, and I drilled a hole on the side of the altoids case for headphone/usb jack.

HT1665 what is the best case for the iPhone 5..

Protect the phone but not take away the appeal. No smudges, fingerprints, etc...

Thanks for the feedback.
I read your reply and had a nice chuckle. The day after I posted this for discussion, I went to the Apple store in the mall looking for a cover.
Prior to getting there, I saw the new Otter box cover for the iPhone5 (slimmer than the previous models) and a new cover by Griffin (slim case with a clear back..I guess to put a photo) at a kiosk. I went into the Apple store and a rep informed me that they were all out.
Outside the Apple store there was a Ghost Armor kiosk. I talked to the rep there to get more comfortable with the idea of how this process works. I was more concerned about having my new device sprayed with a liquid. I decided to go with it...FULL COVERAGE. I am so happy I decided to do this. The phone look amazing and cleaning it is a breeze. Not sure if it will protect it in a fall but WOW the look beats everything I saw hands down.
I'm not a big fan of phone cases because I believe they devalue your device.
Thanks again for the reply.

Can the back case of the iPad be Electro-Etched?

We would like to etch company info on the back of all our iPads. I'm curious if anyone knows whether Electro-Etch could damage the electronics of the device? Thanks,
Jarred

Fact: electro-etching involves passing a current, most likely of several amps, through the item to be etched.
Fact: passing an electrical current through solid-state electronics can and probably will damage the circuitry.
Fact: the iPad's case houses antennas and other components that directly connect to the circuitry and hence does not provide any sort of circuit isolation from a current passed through the case.
I don't know what additional "facts" you're looking for. I doubt very much that you'll find anyone who's tried this already, though I can't say it's not possible. That Apple uses a laser process rather than electro-etching should be something of an indicator.
If you want to take the risk, go ahead and see what happens. Don't expect Apple to honor the warranty if the iPad is indeed damaged.
Regards.

What is the best case for the i-phone? And Why? Thanks

I thought it might be good to start a thread on i-phone cases, which ones do you think are the best and why? Thanks

I bought an iCase which seemed to be okay - clips to a belt, it is leather, and in concept is easy to work with.
BUT - obviously designed without the iPhone in hand - case is fairly expensive, but the volume cutout slot is done improperly, and the case is sewn skewed, like a person sewed it whilst on opium or similar.
Personally, i would wait for a while for a case until the mfgs actually make one around something they can see.

What is the best case for the nano?

hey guys. Im getting a free nano with my macbook and I wanted to know which nano case was the best one? Also, if I put the case on it could I still use the nano armband? Thanks.

you might want to check out
iskin.com
they have really protective cases and they just came out with some armband thingys
but if you want a solid case, apple sells some that are clear all the way around so you can see everything on your ipod, i don't think it works with an armband though

What is the best case for the Nano to avoid scratches?

Im returning my first nano cuz i has huge scratches on it, and i will not use the new one till i get a good case for it so its screen doesnt scratch...
whats the best case out there that protects the entire thing?

you might want to check out
iskin.com
they have really protective cases and they just came out with some armband thingys
but if you want a solid case, apple sells some that are clear all the way around so you can see everything on your ipod, i don't think it works with an armband though

The Unusual Case of The Invisible Font.

Similar Messages

Maybe you are looking for