The update does not work. An error code appears U44M1P2003

la mise a jour ne se fait pas. J'ai un code d'erreur U44M1P2003
Message was edited by: vincenth2012

See the following:
http://forums.adobe.com/message/4193333#4193333

Similar Messages

  • Someone who can help me to do.  Adobe Bridge CS6 Update 5.0.2 The update is not applicable. Error Code: U44M2P28

    Someone who can help me to do.  Adobe Bridge CS6 Update 5.0.2 The update is not applicable. Error Code: U44M2P28

    be sure to use the correct update (32 or 64 bit).
    http://www.adobe.com/downloads/updates/

  • System Recovery does not work. Error Code: 0xe0ef003

    I have a Touchsmart 310 1125y - Upon bootup was getting a BOOTMGR is missing. I tried the system recover on the hard drive and that failed with the error code: 0xe0ef003. I went ahead and purchased the cd revovery discs from HP Site ( 4 plus the supplimental reovery disc) and ran all of them and got down to disc 4 and then that same error came up. When I tried to reboot, it comes up to a blank screen with the flashing cursor in the top left corner. I hit ctrl/alt/del and the HP Blue screen comes up, when I hit the F11 now it just goes to a blank screen again with the cursor in the top left corner. Any other suggestions on how I can fix this?

    Hi
     Once unit is powered on keep tapping F10 Key go to Diagnostics run the Hard drive test if failed you need to replace the Hard drive if test passes kindly let me know.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • HT5717 the update does not work for me

    still at build 1.6.0_51-b11-456-11M4508, despite a "successful" installation of update. Have seen that others are having the same problem. Any ideas?
    thanks

    FireFox is my browser...I get my Email...I try to read it...it opens for a second and then it goes..(.Blue line ) Opps...we can not find this...
    I went to Help...
    " Firefox cannot load certian websites"....I followed this.... Hints on ways to fix this...no go...Sorry

  • I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

    I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

    Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
    Mylenium

  • TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    Hello there, TempestBelcher.
    It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
    Apple - Support - iPhone - Calls Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/calls/#section_0
    If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

    I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

    There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

  • TS2771 what to do my ipod touch 4g is updated to ios6 now it has a white scren and wont turn off and to top it off the homebutton does not work at all

    what to do my ipod touch 4g is updated to ios6 now it has a white scren and wont turn off and to top it off the homebutton does not work at all please help me

    Try:
    - iOS: Not responding or does not turn on
    -When it says place the iPod in recovery mode use this program instead of the buttons.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • I was trying to update and sync my iphone 4, the process stopped, now the phone does not work and itunes appears not to "see" the phone? suggestions?

    I was trying to sync and update my phone with ITunes, about 5 minutes into the process everything stopped.  Now the phone does not work, it will not turn on or off, the screen of the phone shows the Apple Logo and a straight line.  ITunes seems to not "see" the phone.  Suggestions??

    http://support.apple.com/kb/HT3965

  • Hello, I am trying to upgrade to yosemite, but I get the "disk cannot be used to startup your computer" error. Resizing the partition does not work, I get the error "MediaKit reports no such partition" probably because I installed linux in dual boot

    Hello, I am trying to upgrade my macbook pro to yosemite, but I get the "disk cannot be used to startup your computer" error.
    Resizing the partition does not work for me and I get the error "MediaKit reports no such partition" probably because I installed linux in dual boot and the disk manager is lost.
    Anyway to tell the yosemite installer that it should not pay attention whether the disk is bootable or not ?
    If I am doomed, any way to delete the installer and downloaded OS from my hard drive ?
    Thanks for your help

    As usual, the Linux installer wrecked the partition table. You would have to boot from your OS X installation disc and repartition. Doing so will of course remove all data from the drive, so you must back up first if you haven't already done so.

  • I updated my iPad 4 iOS 8.0.2 and the camera does not work, ... Please help

    I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance

    You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Continuous with the problem, the headphone does not work after having my iphone ios 8.0.2 updated

    the headset does not work after having my iphone ios 8.0.2 updated to me is very annoying to have to be answering speakerphone is not private and can not go with the hands-free all the time

    I had the same issue until I updated my apps through iTunes. I had over 100 updates, but none of them showed on my iPod. After they updated everything started syncing like it is supposed. Go to the apps library and check for updates. After everything syncs leave your iPhone/ipod/ipad connected if the spinning arrows at the top is still spinning. It means that things are still being added. If you go to settings > general > about, you will see it loading songs, videos, photos, etc. If you back out of "about" and then go back to it you will see the numbers for each one change.

  • In the absolutely new 5S the gyroscope does not work, error are stable three degrees, calibration is hindered

    in the absolutely new 5S the gyroscope does not work, error are stable three degrees, calibration is hindered

    Also, I probably should have added that I am with Vodafone, and I'm currently using the Blackberry Curve 3G (9300) on the version 5 software. I also have no access to the Internet, which is telling me I have no signal. I have full 3G signal, so there is no issue whatsoever with my signal. I don't use the BBM on the phone, so I'm not sure if the issue is affecting that also, but I assume it would.

  • HT4623 i updated my ipad with ios7 but the keyboard does not work as it should hit the letters it is slow and does not click as it should

    updated my ipad with ios7 but the keyboard does not work its slow when i hit the letters does not click did not do this until i updated anyone can help me on this to fix it

    Settings>General>Reset>Reset All Settings

  • Bridge CC Adobe Bridge CC 6.0.1 Update Update is not applicable. Error Code: U44M2P28

    (MAC) I downloaded Bridge CC and accidently deleted it unproperly. I just trashed it in the trash can and emptied it. I can't restore/ re-download it becuase it still says on Creative Cloud that Bridge is up to date, but when I looked online to properly delete it it Bridge CC is not in my Utilities/Adobe Installers? What do I do? I tried to redownload it online but it still won't work. It gave me this. PLEASE HELP!
    Adobe Bridge CC 6.0.1 Update
    Update is not applicable. Error Code: U44M2P28

    Nikiminn the U44M2P28 indicates and installer error.  I would recommend reviewing your installation log files for the specific errors for the Bridge 6.0.1 update.  You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are welcome to post any specific errors you discover to this discussion.

Maybe you are looking for

  • Over printing in InDesign wont print out text

    When I cut and paste content that was provided by a 3rd party into my InDesign document it looks fine on screen but doesn't print. Only individual letter boxes print out. I get an Alert screen saying it is Over Type but I don't know how to rectify th

  • Multiple R/ 3 sytems

    Hi all If we have multiple R/3 systems which have similar type of data but are discrete systems and I need to get the data from both of these R/3 systems into one single BI instance/system. Please suggest

  • Certification Hands-on Requirement

    Trying for 11g Database OCP certification. I'm so very confused as to which training format will satisfy the requirement. Per http://education.oracle.com/pls/web_prod-plq-dad/show_desc.redirect?dc=D50079GC20 ; Only instructor-led inclass or instructo

  • ServerSocket accept method is not working...

    ServerSocket provider = new ServerSocket(10000); Socket clientSocket = provider .accept(); In my application accept() has some problem and unable to return Socket instance.Can anyone tell me and suggest some idea. Regards, Pradeep

  • Is there a way to change the primary computer for iphones?

    I have been using managing my iphone through my itunes on my home PC, but just recently bought a new laptop and would like to make my laptop the primary computer for my iphone. How do I change it?