The update server for iPad not working

the i tunes ipad update server  i can not get an update it will not conect 

is the dns for the ipad or for a computer?  and if it is for a ipad?  will it be for all wifi? 
im haveing problems getting my Ipad 2 v 5.1.1 to update my app's. Ihad a problem before the update so I thought I would get that done first. Still no luck.. I have turned it on/off, logged out/in .. any other suggestions?
Thank you!

Similar Messages

  • After the update my earbuds will not work for my music BUT will work fine for phone conversations

    After the update my earbud will not work for music BUT will work for phone conversations

    this might sound dumb but how do i do that because that is probably the problem

  • I have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

    i have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

    I have the same problem.  After updating to 6.1.2 my iPad 3,2 will not find Verizon network.  It just says "Searching..." for ever.  Any thoughts?

  • The updater has been unable to communicate with the update server for at least 1h.

    Hi All,
    there is a warning message on one of my IronPort C300V
    Version: 8.0.1-023
    The error message is mention below
    "The updater has been unable to communicate with the update server for at least 1h."
    please suggest the issue and steps to resolve the problem or suggest that it is very critical so can i open the cisco tac call.
    Thanks ,
    Madhuraj

    If you continue to receive this error please check that the virtual appliance is configured to use the dynamichost for updating:
    myesa_2.local> updateconfig
    Service (images): Update URL:
    <ommitted for brevity>
    []> dynamichost
    Enter new manifest hostname : port
    [update-manifests.sco.cisco.com:443]>
    Once 'dynamichost' is entered, the current dynamic host in use will be displayed in the prompt [ ]>, as seen above. 
    You will need to verify that the appliance - escpecially if a virtual (VESA) - is using the correct host.
    Steve
    Cisco Content Security - Email Security

  • Where to find the updated server for 10.3?

    I searched yesterday the Apple's download site with the updated server version for 10.3, but could not find it.
    Anyone have the link to this?

    The server version I am referring to in like the VNC server part.
    When you go to System preferences and enable screen sharing it is a "server like" process running in the background.
    The updated version for 10.3 enable VNC's client to connect to 10.3 host, and from what I can see, it does the same for 10.5 screen sharing capability. That is what I lost when I reinstalled my 10.3 machine: file sharing is working fine, but no screen share available...

  • Firefox has been strongly suggesting I update, which I've tried, but I just get the "barber pole" wait with message "connecting to the update server" for hours and nothing happens

    Firefox has been suggesting I update my software for a few weeks now. I happily click on "update now" and my Mac appears to be trying to connect to the update server. The window displays "Downloading Firefox" and the barber pole wait bar is moving. I've done this 5-6 times, for HOURS at a time, and nothing happens.

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Sd card reader for ipad not working

    My sd card reader which I just purchased at best buy and is an apple product is not working. Although there are pictures on it from my camera to my laptop to the sd card it says there are no images. We need this to work for a trip we will be making soon. Need to use it to share photos in a shoot between other photographers and was hoping to use ipad mini.

    TO be read by the iPad those photos must follow a very strict naming convention. THey need to be in a folder named DCIM and have a file name of exactly 8 characters, DSC_4837.jpg for example. (this is how most cameras work, so anything manually put ont he card has to follow the naming convention)
    The card you're playing with, does it have photos on it that you put on there or photos directly from your camera?
    Another thing if the formatting is right, sometimes the port gets turned off ,so to speak. Try giving your iPad a reset to turn things back on. Hold down the sleep and home keys for about 20 seconds, until your iPad reboots. Then try again.

  • Wehen I attempt to sign on to Firefox I keep getting a message saying "the update didn't work-and wehn I attempt to do the update, it still does not work.-please provide a fix...

    I recently downloaded Firefox 6 onto my Gateway laptop-Windows 7 Premium - and now each time I try to sign on I get an error message which states that the Update could not be downloaded and that I should go to a website and download it manually, which I have done. Each time I try it states that it cannot download the update due to an error and to go to the website and download it (loop).

    Thank you for your reply. I have done both methods for setting Firefox as the default browser but it still doesn't seem to be working. Using the Firefox method: the check box is selected for always checking if Firefox is the default and each time it comes up I get the message that is not the default browser. Select that you want it the default browser and it says I have to restart the computer. Shown in the attached pics.
    I have also gone to the Windows 7 control panel as described in another post and set Firefox as the default program but it still comes up as not my default program.

  • Instructions for adding a word to spell dictionary in Pages for iPad not worki g

    Instructions for adding a word to the spell dictionary in Pages for iPad say to double-tap the word. At that point you're supposed to be given the option to "define" the word, which I take to be adding it to the dictionary.
    Double-tapping only gives me alternative spellings of the word. I don't get an option to define.
    What am I overlooking?
    Thanks,
    Eric Weir

    Not working for me, Demo.
    Entering the words in settings would be cumbersome. I have a long document with many unfamiliar names and technical terms.
    In Pages with spellcheck on unrecognized words are underlined in red. Tapping once highlights they word in a pinkish box. Tapping twice brings up a list of alternative words in a graphic display rather a text suggestion with option to dismiss. Tapping outside the suggestions graphic cancels it but does not seem to reject the suggestions, I.e., not in the sense that you are then given the option of accepting the word into the dictionary.
    Help gives a procedure for doing this, but it does not work.
    The document I'm working on is a finished document. No composition or editing required. I just need to get it formatted for publication. Most of the words another recognized by spellcheck, and there are many, need to be enter into the dictionary.
    Thanks,
    Eric

  • 14.2.1 update Save for Web not working

    Opening up an image I made moments ago through Save for Web dialog (as a normal 'web' 72 dpi image) returns a 300dpi image every time. Not functioning. This happens every time since the update to 14.2.1. I thought it must be me somehow, but it is the software.
    I am running 10.8.5 on a 6-core 3.33 GHz

    Yes, I am serious.
    When I want to save a JPEG that has a particular ppi value I use File - Save As.
    So I ask again:  What is your use for your images that you're using Save for Web and care about the ppi?  Perhaps there's another way to get what you want rather than through Save For Web.
    I'm not being critical - I promise.  I just thought maybe I could suggest alternatives.
    -Noel
    P.S., The ppi normally doesn't matter when images are displayed on the web.  HTML usually is used to size images by pixels or points.

  • The Web Agent for Apache not working

    Any chances to put the last version of Web Agent (im8154) working with Apache in Linux?
    I4m using a Red Hat 6.2 system with Apache 1.3.12 and I compile the web agent without errors. In the some box I use php40 with Apache and I connect and use my Oracle database in another machine without problem.
    All the enviroment is set (ORACLE_HOME, LD_LIBRARY_PATH, PATH) and I even put the Apache user running as oracle.dba
    The problem is always the some: the Apache don4t find any page (404 in the log) in the /intermedia path. It4s seems that dont fire the web agent module that is compiled (I confirm with httpd -l) into. I can put anything in the httpd.conf in the Intermedia Location section that the symtom is the same: no errors, no logs in ORACLE_HOME/ord/web/log or in the /tmp, nothing at all. Just "Page not Found". But the others Location sections are working like the server-status.
    Any ideias people?
    Fernando Soares

    Any chances to put the last version of Web Agent (im8154) working with Apache in Linux?
    I4m using a Red Hat 6.2 system with Apache 1.3.12 and I compile the web agent without errors. In the some box I use php40 with Apache and I connect and use my Oracle database in another machine without problem.
    All the enviroment is set (ORACLE_HOME, LD_LIBRARY_PATH, PATH) and I even put the Apache user running as oracle.dba
    The problem is always the some: the Apache don4t find any page (404 in the log) in the /intermedia path. It4s seems that dont fire the web agent module that is compiled (I confirm with httpd -l) into. I can put anything in the httpd.conf in the Intermedia Location section that the symtom is the same: no errors, no logs in ORACLE_HOME/ord/web/log or in the /tmp, nothing at all. Just "Page not Found". But the others Location sections are working like the server-status.
    Any ideias people?
    Fernando Soares

  • Why is my purchased upgrade for PowerPoint for iPad not working?

    I downloaded the program and it was a 30 day free trial. I wanted to order the upgrades and am willing to pay  and checked the box, but the iTunes receipt doesn't bill me for it, and the features won't activate in PowerPoint. What's going on? Help!

    anyway: without knowing what is the size of your doc, i'll give you a better workflow for editing etc:
    Open the image
    save it as a copy cylinderImage.psd
    create a new layer filled with black (for eg)
    select that layer and 3d / new shape from layer / cylinder
    then: in the 3d panel: select cylinder_material and right of diffuse click the tiny arrow and remove texture
    and then click the tiny arrow again and and load texture, browse and select the cylinderImage.psd you created earlier
    then if it goes to the top: click top_material and right of diffuse click the tiny arrow and remove texture
    it will jump to the cylinder part.
    this workflow may be longer but not hard and nearly foolproof
    G

  • Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Recently backing up my ipad onto my macbook, which is the backup server for all of my gadgets.  This includes all my photos and tons of music.  The macbook said it could not backup the ipad because there was insufficient disc space to do so. What now?

    I have a macbook operating OSX10.6.7.  Recently backing up my ipad which had lots of photos from a recent vacation.  I use this laptop as the backup server for all of my gadgets so it has thousands of photos and tons of music.  It just told me that it couldn't back up the ipad bc there wasn't enough disc space.  I was afraid that this would happen eventually.  What next?  Newer laptop with more space?  I'm not sure what files I could sacrifice to free up more space as most of these are important.

    What size hard drive do you have in your MacBook? The cheapest options are, a larger internal hard drive, or an external drive. Or you could get a cheap desktop PC and network to it for storage. I've got one that lives in the hall with 3 Terabytes (That's 3000gb) of storage.

  • I never set a passcode for my iPad but it is locked and I can't get it unlocked.  The "slide to unlock" does not work.  How do I get it unlocked?

    I never set up a passcode for my iPad 2 but it is locked and I can't unlock it.  The "slide to unlock" does not work.  Any suggestions on how to unlock it?

    You have to slide to unlock to bring up the keyboard if a passcode is set. If you can't slide then try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

Maybe you are looking for

  • Custom Sort of Duplicated row walues in Webi based on SAP BW Universe

    It is a duplicate thread i have already posted in Integration kits - SAP section. This is regarding custom sorting of row value which are duplicated in Webi which is based on SAP BW Universe. I have created Webi Report based on Characteristic structu

  • Want to Completely Start Over

    Hi, This is my first post here. I searched around and couldn't find an exact answer. I use Windows XP. I got an iPhone about 2 months ago, and before that I had never used iTunes before. I'm a musician and a music lover, so I'm always wanting to tran

  • JMS receiver to JMS sender Problem

    Hi, Please find the scenario IDOC 'A'   - > PI - >JMS(WebSphere)  Receiver IDOC 'B'  <-- PI <-- JMS (WebSphere) Sender now here I need to pass the response to some other IDOC. I have follwoing 2 questions: 1. Please let me know adapter module to buil

  • Music ive purchase and imported wont sync over to ipad

    music ive purchased on itunes wont sync onto my ipod, any ideas

  • Very urgent...function wise security

    Hi all, -our system has function wise security on forms,which mean each user has different grant on each function(FORM) -those function are defined in table holds FUN_ID,Fun_Path,Fun_title -due to workflow difference many functions may refere to the