The update to the upgrade server runs on but does not connect for this new upgrade
I was notified that there is a newer version 14 from existing 13.01. Several files were downloaded and installed, then it said to re-start. Okay so far, then Mozilla re-starts on ver 13 and another window opens saying that it is connecting to server, but it never does. Keeps running. Still on ver 13.01, not 14
Sometimes the updater messes up, requiring you to download the Firefox update manually. Go to [http://www.getfirefox.com www.getfirefox.com], and download and install Firefox 14.0.1
Similar Messages
-
We have a public SSL certificate that allows for Active Directory sync with LDAPS on port 636 with our email smart host. This was working fine and suddenly stopped working and we are now getting SChannel errors Event ID 36869. There were no changes made
to the Exchange server, the firewall or the DC which holds the certificate. I have run a new certreq from the DC and then re-keyed the public SSL certificate and re-installed 3 times but the error does not go away and AD Sync with the vendor
fails. When I run LDP.exe the connection on port 636 fails with "cannot open connection" and the system event log throws the S Channel event 36869 "The SSL server credential's certificate does
not have a private key information property attached to it" There is no software firewall set on the DC. When I run Certutil -VerifyStore MY it shows the current certificates as well as the revoked and expired certificates
correctly. Certificate 0 is the public cert and is listed with Server and Client authentication, the FQDN of the server is correct and "Certificate is Valid" is listed. The private cert is Certificate 1 and has server and client authentication, the
FQDN is correct, Private key is not exportable and it ends with Certificate is Valid. I do not see a point in re-keying the cert again until I figure out what the root of the problem is. I have read in some forums that the private cert should not be set to
expire after the public cert but that does not make a lot of sense when in a situation like this the private cert is of course newer than the public. In fact it is too early to renew the public cert. I have been troubleshooting this for a few days and at this
point I would have to drop my AD sync with the vendor to LDAP in order to add new users. I do not want to do that for obvious reasons and I do not want to have our spam filtering and email archive service running without Directory sync. Any help would be greatly
appreciated.Hi,
Have you tried this?
How to assign a private key to a new certificate after you use the Certificates snap-in to delete the original certificate in Internet Information Services
http://support.microsoft.com/kb/889651
Best Regards,
Amy -
My home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.
Maybe not too late to help you.
For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
HTH. -
"Digital Editions could not connect to the fulfillment server. Please check your internet connection." This is the message I get, yet my internet connection is good. Help!
we dont have a answer
-
Carrier issues, Iphone 3gs: Carrier is in the carrier list but does not connect = no service
Right introduction, I live in the country signal for iphones under 02 in my area is 3-4 bars of GPRS signal. This is plenty to make and receive calls, texts and all that as use home wifi for internet simple. Everything working fine for about a year of having the phone, then did updates and started to see the "no service" almost all the time and had to place my iphone in a signal spot just to get 1-2 bars and couldn't touch it without dropping out! Basically I could not use it at all and the crap about the signal now showing true signal is rubbish as before i could make calls fine and no drops, but now due to "no service" i can't make any calls or texts or anything. I have a ipod touch when nothing HAS CHANGED other than i can think when the update to 4.0 came along! I have been living with this for almost a year. I have done every possible solution, apple stores, 02 stores, new sim cards (many), every type of phone resetting possible, manually turning off 3g and other settings to turning everything off bar just basic GPRS signal. Network resets everything possible no joy what so ever.
I have been paying for a year now for a phone that i can't use anywhere other than right next to a signal tower! Yes the phone connects to GPRS, EDGE, 3G when in town but just about. Before these problems i could get max 3G signal in my local town no issues but now struggle to get 1 bar of 3g in a town as well. The problem is I used to be able to use my phone as a phone where i needed to use the phone. Now i can't use the phone anywhere and get drop calls all the time when i do manage to get signal!!!!!!!
Now i can't even connect to 02, yet at home under a manual carrier search all UK networks appear on the list including 02, I click on 02 and it comes up with the warning "network lost see settings" So my phone CAN find signal but does not connect to 02. This has been the case for a long time now and as stated before several sim cards latter and plenty of trips to apple and changes of phone make NO difference which makes me believe this is a software issue on apple's part. I only started getting these issues when the iphone 4 came out and updated the ios. Now what can i do, i can not downgrade the ios as i never jailbreaked my phone so don't have the files stored that i should to be able downgrade. Apple are offering 0 help with this, all i want to do is smash it to bits as it no longer works as a phone. I have to use a 10 year old nokia to call and actually use my contract that I PAY FOR. I PAID FOR MY PHONE and just after the warranty runs out as well and it seems all a software problem.
I have searched all over the net to find no solutions to my problems this is a last resort before i do actually smash the thing and I love apple to bits but come on a simple software issue.
I mean isn't it silly that i can't downgrade my ios and that apple don't support this and yet my issue seems to lie in there update.
I know that the signal update reworked the algorithm to show true signal XXXXXXXXXXXXXXX um no it doesn't as now i have 0 signal as before i had no problems what so ever with dropping calls and the signal showing right so WHY WHY WHY.
Please help I am so frustrated with things and need to solve this issue. Please ask anymore questions if you want more details about anything, i need to sort this out please.
By the way i am running ios 4.3.3 yet bellow in the options this is not stated?? I have been updating hoping that it gets solved but only seems to get worse the more i update.
Thanks
James
Thanks
JamesSame problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(
-
My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?
Welcome to the support community group.
First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop. Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back for 15 - 20 seconds while you reconnect it to power. Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
Then run the airport configuration utility from your laptop. Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility. Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
Check back if you're still having problems. -
Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
Only the option "connect to wlan" is succesful.
With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
My notebook is a MacBook pro.
Any idea????
Thank a lot in advance!
Kind regards
IngoNeverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
Apple - AirPort Extreme - Feedback
If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
The "catch" here is that you must have an Apple router providing the network to be extended. -
ORA-13605: The specified task or object Get does not exist for the current
Dear all,
11.1.0.6 on solaris 10
SQL>
SQL> DECLARE
2 taskname varchar2(100);
3 taskdesc varchar2(128);
4 task_id number;
5 object_id number;
6 timeLimit varchar2(25);
7 numDaysToRetain varchar2(25);
8 objectName varchar2(100);
9 objectType varchar2(100);
10 BEGIN
11 taskname := 'SEGMENTADV_8980096';
12 taskdesc :='Get';
13 numDaysToRetain :='30';
14 dbms_advisor.create_task('Segment Advisor','',taskname,taskdesc,NULL);
15 dbms_advisor.create_object(taskname, 'TABLE', 'TRPT', 'CRM_CHECK', ' ', NULL, object_id);
16 dbms_advisor.set_task_parameter(taskname, 'RECOMMEND_ALL', 'TRUE');
17 dbms_advisor.set_task_parameter(taskname, 'DAYS_TO_EXPIRE', numDaysToRetain);
18 END;
19 /
DECLARE
ERROR at line 1:
ORA-13605: The specified task or object Get does not exist for the current
user.
ORA-06512: at "SYS.PRVT_ADVISOR", line 4766
ORA-06512: at "SYS.PRVT_ADVISOR", line 4637
ORA-06512: at "SYS.DBMS_ADVISOR", line 56
ORA-06512: at line 14
Am running the above as sys user ..
Any idea ?
KaiHi,
This link may help:
ORA-13605: The specified task or object ADDM:<task number> does not exist.
Thanks and Regards,
Rajesh K. -
My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.
Hi ...
Checked to see how much free space there is on the startup disk lately?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
A Safe Mode boot takes longer then a normal boot so be patient.
Once you see the Desktop, click the Apple menu icon top left corner of the screen.
From the drop down menu click Restart.
See if that makes a difference ... -
I have a 16GB 3GS phone since about20 months now. For the last few days, my phone is constantly giving me message that the accessory attached to my phone is not optimized for this iphone. You may experience noise or poor communication, while there is no acessory attached to it. I always used standard headphones and charging cable. Now when i recall, it started at one of the sync sessions with my itunes. I have turned my phone off and aon again and again but the message keeps coming every one or two minutes.I have also started loosing voicce on different applications like youtube etc. Also the ringer volume up and down key does not show me the small boxes increasing or decreasing on screen. The phone is playing crazy. Can someone help please
Thanks
ZiaIt helped earlier but it has come back again. I don't know what to do. I tried what you said earlier but this time even this is not working either. And quite intrestingly my phone won't turn off. I turn it off, it goes off and then restarts on its own and then keep giving the same message again and again.
Could it be a charging cable, is there any chance that the cable which was working fine one day could turn to be "incompatible" with iphone the other day????????
Please help -
Is my original iPad compatible with iHome iDM12 wireless speakers? I am having trouble pairing. iPad sees device but does not connect.
It should be it the iHome supports the bluetooth profiles that the iPod supports. See:
iOS: Supported Bluetooth profiles
Try resetting the iHome if it was previusly paired to another device.
Also see:
'iOS: Third-party Bluetooth headsets, headphones, and keyboards -
I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!
Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
Mylenium -
My camera works with the photobooth and with skype but does not work with other applications like the "lolcam" from facebook or the " faceonthe hole" application. Can anyone help?
There was a issue with school computers being used to spy on kids in their bedrooms, Mac's were involved.
So Apple most likely tightened the API's to only select, trustworthy companies as not to abuse the web cam access priviledge.
If you want to use a web cam with these other programs and services, you'll likely have to buy a third party USB one, so you can manually disconnect it.
There isn't a way to physcially disconnect the built in web cam on Mac's without busting open the machine. -
After recent upgrade Mozilla will open but does not connect - I have Norton Antivirus.
After recent upgrade Mozilla will open but does not connect. I have uninstall/reinstalled several times. I have NortonAntivirus.
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware -
OVM Server 2.1.2 does not prompt for Networking
OVM Server 2.1.2 does not prompt for a network setup (ie DHCP or static IPs).
- I tried re-installing this several times
This same machine works with native Enterprise Linux 5.2 x86-64 networking.
The motherboard has two onboard Realtek 8111C chips (10/100/1000 Mbit)
http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2842
Will setting up networking by hand work with OVM Server 2.1.2?OK I finaly made my Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller to work.
First install an Ethernet card in your box that OVM supports. This to make the OVM installation run smoothly.
When OVM is up and running follow the steps in [Mini-HOWTO] RPMs needed to compile a kernel-module on / for VM Server to get a working environment to compile modules.
Now get the driver for the unsupported card from ftp://61.56.86.122/cn/nic/r8168-8.008.00.tar.bz2 .
Unpack the file by running;:
tar -jxvf r8168-8.008.00.tar.bz2
Now follow the steps in the included readme file to compile and install the driver.
After this I edited the file /etc/modules.conf and changed the line
alias eth0 xxx
to
alias eth0 r8168
I then turned of the machine and removed my temporary network card.
When booted I ran system-config-network to configure the network once more to the original values I entered when I installed.
Maybe you are looking for
-
Hi, I have created a custom field in the FI invoice (FB01) that it is not created in the MM invoice (Miro). When I post the MM Invoice I need to know a user exit or BADI that can help me to retrieve the value required for the FI invoice from a custom
-
I need help deleting a movie on my ipad that says installed but never downloaded. if i try to download it i get a message that says " unable to download .please try again later" Any ideas??? BTW the movie downloaded onto my mac but not my ipad...
-
Safari "Failed to Open Page", unlike Firefox, Netscape, etc.
I am getting this only with Safari - Safari can't connect to the server. Safari can't open the page "http://www.apple.com/" because it could not connect to the server "www.apple.com". This happens on every page I try and open, but only with Safari. I
-
Webcenter tutorial supporting files does not contain script, portlet
As per webcenter tutorial, the webscentertutorial*.zip should contain script, portlets etc. But the download of supporting files from http://www.oracle.com/technetwork/middleware/webcenter/overview/index.html contains only the followings. images skin
-
STWB_WORK: Manual Testcase not visible.
Dear SAP Fellows, I work on an SAP ECC 5.0 SP 19 R/3 System, Solution Manager is not involved. Scenario: We want to use the testing workbench to manage manual test cases. - I registered about 30 manual testcases in SCAT. In SCAT under Extras -> Tes