The update toCS6 does not run

Ihave installed and run CS5...
I have bought update to CS6...
the update to CS6 does not run!
(I have deleted with special delete tool from Adobe.)
Thank you for help

What "does not run"? What system? You need to be a lot more specific.
Mylenium

Similar Messages

The update map does not support "UPDATE"

Hi,
I've created a Logical Data Service, but get a warning
The update map does not support "UPDATE" : One or more update operations do not have update capabilities
While creating the Physical Services(Oracle 11g), the update methos was not creating; so I create those manually.
The update does not work, even from the Physcial service( It says Operation Successful) but the data does not change
Any help is appreciated
Rgds,
Is

Please post your physical data service both before and after you added the update.

I have a ipod touch 3 generation with iso 4.2.1. Model a1318 The update menu does not appear.

I have an ipod touch 3rd generation Model A1318 32gb. How do I update an older iso 4.2.1 to a later version.
the settings/general/update menu does not display update.

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

CS6 Photoshop Update Option Does Not Run

I ran the Update option once, mainly to get the ACR 8.2 version. It looked like all the files downloaded successfully and that the update process started. Then nothing.
- Clicking Update has no effect. There are absolutely no error messages.
- Downloading the ACR 8.2 file and trying to run the AdobePatchInstaller.exe file does nothing.
- Removing the Adobe Application Manager (AAM) Cache accomplished nothing.
- Trying to run the AAM does nothing.
A popup message just informed me that there are 9 Adobe updates available and to launch AAM. Which, of course, accomplishes nothing.
A support person on Live Chat said this is a known issue.
What I need is a known solution. I'm running Win7 Pro, SP1, 64-bit, 8Gb RAM, GeForce GT 630 Nvidia chipset graphics card.
Thank you.

Update AAM after downloading from below link.
http://www.adobe.com/appsmanager/index.html
Try Help->Updates again, if it still does not resolve your issue, Please let me know.
Regards,
Ashutosh

BIOS update utility does not run

I am on an IBM-branded T42, model 2378-EXU. My current BIOS level is 3.13 (1RETDHWW). I have XP Professional with all service packs and updates installed and up to date.
I am trying to update to the latest BIOS of 3.23 (1RETDRWW).
I downloaded the BIOS update utility file 1ruj37us.exe from the Lenovo support & downloads site. I copied it to a temp directory on my hard drive. I disconnected my computer from the dock, have it on AC power, have a fully charged battery. I have shut down all other applications and my antivirus software. I have followed all other instructions on the site verbatim.
When I run the exe file, it starts up in Windows as expected. I run through all the confirmation screens and tell it to start the BIOS update. As I understand it, the next thing should be automatic startup of a DOS utility that does the actual work. Instead, as soon as I hit the final confirmation on the Windows utility, it shuts down Windows and restarts the computer. The BIOS does not get updated. I have confirmed this through system utilities (the Thinkpad system information) and by interrupting startup and verifying the BIOS information in the configuration utility. I have also tried reloading BIOS to default in order to reinitialize it.
I have done these steps at least four times now. My computer doesn't update and the update utility never fires up the workhorse part of the functionality. It just goes straight to system restart.
Can you offer any suggestions?

I have started the exe utility from a DOS window by manually typing in the name, I have started it from the RUN dialog box, and I have started it by double-clicking it from the Windows Explorer. In all cases it starts up the Windows application portion just fine. I get all the initial warning messages and confirmation messages. But as soon as I get to the "do it now button" (click Next to update your BIOS), it just immediately shuts down and restarts my computer without doing the flash update.

The NI-Motion does not run a simulation Properly

Hi,
I have a small problem I recently installed NI-Motion on my computer ton control 1-axis stepper motor. When I run a small program built in NI-Motion Assistant it does not work properly. Even if I set my velocity to 500 step/sec it goes to 10000 step/sec and spin indifinitively. Do you know how I can solve my problem.
Thanks
M.

Dear M.,
Thanks for attaching your MAX configuration and for the results of your testing. Everything seems fine with your setup in MAX from what I can see, so I decided to set up a test here. I was able to run the first tutorial (titled Heating a Semiconductor Wafer in a Furnace) without any problems here with a PCI-7344 Motion Controller, MID-7602 drive, and NI Motion Assistant 2.2.
Perhaps we can do some more troubleshooting in Motion Assistant:
What step exactly did your script get stuck on? If we know the expected behavior, then we can troubleshoot the actual behavior a bit better. For example:
Did your script make it past the reference move? If not, the continuous spinning makes it sound like it's just not finding the limit switch(s) it needs to move on to the next step.
But if it did make it to the straight line move, and just kept going past the position that you set, then something else is going wrong. You can check this by making sure you know the position setting and the mode (absolute or relative), and then looking at the Step Status tab during a move to see the Current position and velocity readouts. I would recommend using absolute position mode for your testing.
Did you set the velocity under the Move Constraints tab for all the different steps? I initially set just the first straight line move velocity and not the velocity on the reference move. After changing the velocity, click outside the tab (perhaps in the blank space under the add step button) and then go back and make sure Motion Assistant saved the value you set for the velocity. You should see a little dialog box flash momentarily, but really too quick to read, indicating that the script has been updated.
Does your motor move at the correct commanded velocity for a script that you create from scratch with just one move? Can you complete other types of moves than the one the script gets stuck on with the motor spinning indefinitely?
Hope this helps; please post back about how things progress.
Best Regards,
~Nate

I have been trying to download a new update and it goes thru the strokes and restarts but the update version does not show when I go to "about this computer" to see what version is on. Any ideas what is wrong?

I have been trying to download an update on my MacBook Air and it goes thru the process and restarts but the update does not load. I know it is not loading because when I go to " About this computer" the version does not show it updated. Any help would be appreciated. Thanks

trying to download an update
v10.6.8 is as far as Snow Leopard can be updated.
Which update are you trying to install ??

I too am experiencing the App Update indicating several updates are available...but none show and the Update All does not show either. I see several Apple products have this problem. Need a fix!

Can anyone yet find a problem to the Apple Update Icon showing several updates are available...but...none show to actually update....just a blank screen. I have done several reset operations, including complete reset as recommended by others, but yet the problem remains. I need a fix to this so I can update the Apps indicated. Apple needs to publish this fix PRONTO.

The update server is down; try this temporary workaround
App Store>Purchased>Select "All"
Note: Look out for apps that have the word "Update"
http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

THe update window does not accept my serial number. Purchased my mac with free upgrade time

I can not get the system to accept my mac serial number. It states it is invalid. I purchased my mac on June 8 so I am eligible for upgrade. Anyone have a solution?

Tabasa wrote:
I am upgrading Final Cut Studio to Final Cut Studio 2 on Mac Pro.
I have Final Cut Studio2 Upgrade from Final Cut Pro or Production Suite.
it is the wrong version and you overpaid then
you got the $699 version (FCP to FCS2)
you need the $499 version (FCS to FCS2)

I have an iphone 4 and ipad 2 3g wifi. I synced both these with cloud, but now the updated contacts does not sync with my macbookpro ? How do i get it synced also with my laptop ?

Can any one help me resolve this problem ? or is it a BUG....

In your system prefs under iCloud, make sure you have signed into your apple id and checked the desired checkboxes.

The Mail App does not run in my Mac, and also does not allow to download any actualization

I also tried to send it to the Trash Can but there´s always a message that says "Close all the applications first" even when all the apps are closed but aparently the #mailapp is not

Hi, are the pics at a remote location, or on your Mac?
Have you tried drag & dropping the graphics on the signature window?

Update process does not work on Tabular Form

Hello,
I have 2 tabular forms on one page, which are using manual update processes.
First form is created using wizard, and therefore works perfectly.
The update process is as follows:
DECLARE
lc_string VARCHAR2(4000);
BEGIN
FOR i IN 1..APEX_APPLICATION.G_f01.COUNT
LOOP
     lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*03*(i) || '|' || APEX_APPLICATION.G_f*04*(i) || ']';
END LOOP;
--Database processing using the concatenated string here
END;Second form is created manually, using the following code:
SELECT apex_item.checkbox (30,
                           '#ROWNUM#',
                           'onclick="highlight_row(this,' || '#ROWNUM#'|| ')"',
                           NULL,
                           'f30_' || '#ROWNUM#'
                          ) delete_checkbox,
       CATALOG_ID,
          apex_item.hidden (31, CATALOG_ID)
       || apex_item.text (32,
                          LANG,
                          80,
                          100,
                          'style="width:100px"',
                          'f32_' || '#ROWNUM#'
       || apex_item.hidden (33, wwv_flow_item.md5 (LANG, DESCRIPTION)) LANG,
       apex_item.text (34,
                       DESCRIPTION,
                       80,
                       100,
                       'style="width:255px"',
                       'f34_' || '#ROWNUM#'
                      ) DESCRIPTION
FROM V_CATALOGS
UNION ALL
SELECT     apex_item.checkbox
                          (30,
                           TO_NUMBER(9900 + LEVEL),
                           'onclick="highlight_row(this,' || '#ROWNUM#' || ')"',
                           NULL,
                           'f30_' || TO_NUMBER (9900 + LEVEL)
                          ) delete_checkbox,
           NULL,
              apex_item.hidden (31, NULL)
           || apex_item.text (32,
                              NULL,
                              80,
                              100,
                              'style="width:100px"',
                              'f32_' || TO_NUMBER (9900 + LEVEL)
           || apex_item.hidden (33, NULL) LANG,
           apex_item.text
                                           (34,
                                            NULL,
                                            80,
                                            100,
                                            'style="width:255px" ' ,
                                            'f34_'
                                            || TO_NUMBER (9900 + LEVEL)
                                           ) DESCRIPTION
      FROM DUAL
     WHERE :P18_TEMP = 'ADD_ROWS1'
CONNECT BY LEVEL <= 1However, the update process does not work on this form.
I created it using the first one as an example, but with the id's of the second form:
DECLARE
lc_string VARCHAR2(4000);
BEGIN
FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
LOOP
     lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*32*(i) || '|' || APEX_APPLICATION.G_f*34*(i) || ']';
END LOOP;
--Database processing using the concatenated string here
END;Also, both forms are opening in a modal pop-up dialog window.
I use a Dialog Region plug-in for that.
Please advise, what is causing a problem with update?

Sloger,
if this is your tabular form
SELECT apex_item.checkbox (30,
...and this is your update statement
FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
...Then you will only ever update records that have been checked. Unchecked checkboxes are not passed back in the global array. You need to have a hidden column with the ID's for the record and loop through that when you are updating/inserting. That is why the built in tabular form has a MRU and a MRD. the MRU loops through the hidden ID column. The MRD loops through the checkbox.
Thanks,
Tyson Jouglet

Add does not run with sql server 2008

Hi all,
My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
is installed.
Help needed.
Thanking you
Pradnya

Hi Use this
Dim i as integer
i=oCompany.Connect()
if i<> 0 Then
msgbox(ocompany.GetLastErrorDescription ())
end if
the you will get the error description also use try catch wherever necessary
Alternatively you can use
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
Set SboGuiApi = New SAPbouiCOM.SboGuiApi
sConnectionString = Command
SboGuiApi.Connect sConnectionString
Set SBO_Application = SboGuiApi.GetApplication()
Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
ocompany = SBO_Application.Company.GetDICompany
HTH,
Atul

Slideshow - does not run! What have I done wrong?

It's stuck on the first image, does not run to the next.
Can't remember that I done any changes. What have I done wrong?

Perhaps an over simplified question, but have you selected more than the first image? Slideshow only runs for the images selected, and not all images in an album or project, unless selected. Sorry if this is too basic.
Ernie

OS X Mavericks 10.9.3 Does Not Run Smoothly

Hi,
I just upgraded my iMac and MBP from the Mac OS X ML 10.8.5 to the latest OS X Mavericks 10.9.3.
The new system does not run smoothly.
No matter it's the iMac or the MBP, the screen freezes for a very short of time whenever I try to switch to a different running program(especially when I try to switch to other programs from the Safari).
So what's causing the problem? What should I do about it?
Thanks.
Ed

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

The update toCS6 does not run

Similar Messages

Maybe you are looking for