The upgrade N70 is sucks No More Support Chinese C...
It make me quite frastrated, after I have upgrade the firm for my N70 it no more support chinese character. The worst the font size is ugly and big.
Really need helps where to find the firmware.
Nokia Online Update really sucks!!!!!
I have the same problem with you, please help me to solve this problem. How to reset the phone to support reading Chinese character? Thanks in advance.
Similar Messages
-
I have recently upgraded a solution from vs2008 to vs2010. This solution happens to contain several .rptproj file (SSRS 2008R2 reports). I was able to upgrade the solution after I installed SQL2012 (which installed the necessary templates
into vs2010).
However whenever I open the solution the Output window now pops up and continuously lists the same error (shows output from Source Control - Team Foundation).
TF10121: The path '' is not found or not supported. Type or select a different path.
I have tried reinstalling Team Explorer SP1, and VS2010 SP1, but with no change.
If I unbind the solution from source control the messages go away. Rebind and they return.
The problem doesn't always start straight away, it may take a few solution explorer clicks.
Opening an rdl into the editor seems to halt the messages, until I go back to clicking in solution explorer (similarly the issue doesn't always re-occur first click).
E.g.
TF10121: The path '' is not found or not supported. Type or select a different path.
TF10121: The path '' is not found or not supported. Type or select a different path.
Audit.rdl has been automatically checked out for editing.
Then no errors until going back and clicking in solution explorer (which is using auto hide)
[See also:
http://social.msdn.microsoft.com/Forums/en-US/tfsversioncontrol/thread/8c7cc472-3ac1-4800-8199-5f4b41414748]
Does anyone else out there share this problem or more importantly a solution/work around?Hi Evanw21,
Based on the current information, it seems to be the known issue described in the following KB article:
FIX: TF10121 error when you right-click a project file of the project or a folder in the project in Visual Studio 2010
The root cause of the problem is that we hold onto a stale reference to the old project and get back an empty string when we try to get its directory path. To resolve this problem, contact Microsoft Customer Support Services to obtain the hotfix. For a complete
list of Microsoft Customer Support Services telephone numbers and information about support costs, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support
Besides, there is one easy workaround. If we close the solution and re-open it prior to attempting to re-add the project, we should be able to add it successfully.
References:
TF10121
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
I upgraded firefox and still get the remark about this version not beeing supported
i recently upgraded my version of mozila without any fallbacks, but still get the remark "Your version of Firefox is no longer protected against online attacks.
Get the upgrade - it’s fast and free! "
what shall i do ?In your More system details... link on right it appears you are posting with the old Firefox 3.5.15
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.15) Gecko/20101026 BTRS31753 Firefox/3.5.15 ( .NET CLR 3.5.30729) Facicons
Some extensions that tack stuff on end of useragent may make all some part of useragent get stuck at a old version. The Facicons related extension installed at some point may be a culprit.
https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser -
My iPhone said I needed to get more backup space in order to backup my phone. When I purchased an additional 10G my storage dropped below the original 5G. So when i tried to cancel the upgrade immediately, it said I have to wait until the end of the year. Is this a scam apple is using to squeeze more money out of their loyal customers ? When I tried to contact phone support they spent 10 minutes trying to get me to buy additional warrant services before finally telling me they couldn't help with iCloud.
Does anyone have any suggestions ?
A very disappointed apple fanThis should clear up on its own and allow you to delete the account, however it can take 3-5 days before this happens.
-
i have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated
i have also tried 4 different chargers both official apple and non officiali have tried this but still not working i found a way of fixing it by restoring the phone but this has now put my phone in recovery mode and when i try to fix it i get an error 14 which i have no clue what it means
-
JAN 4, 2012
As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip .. Now Lion only Export's 1 size, . only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail ???
Between the Issue of the Lion, and Email issues , and the Upgrade of I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge .. 70,000 + photos in the Computer. . and was 40,000 in the I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB or 32 GB Unit . .
No Help . .. so far, .. as a Apple user since 1996 .. I have Never experieanced such frustration ???
( any one have some help if similar experiances ? thank you )JAN 4, 2012
As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip .. Now Lion only Export's 1 size, . only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail ???
Between the Issue of the Lion, and Email issues , and the Upgrade of I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge .. 70,000 + photos in the Computer. . and was 40,000 in the I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB or 32 GB Unit . .
No Help . .. so far, .. as a Apple user since 1996 .. I have Never experieanced such frustration ???
( any one have some help if similar experiances ? thank you ) -
I have a macbook that I purchased in 2007 with operating system Mac OS X Version 10.5.8. I recently did the new software upgrade on my iPhone and now my iPhone and my computer cannot connect. I tried downloading the newest iTunes but it is not supported by my software. What can I do now? (Other than buy a new computer).
Is the new iTunes library on a different computer, or the same computer?
Are you concerned about photos that you have taken with the iPhone in the Camera Roll, or photos you have synced to the iPhone from your computer?
Contacts should be configured to sync with an app on your computer. You set this up in iTunes on the Info tab with the iPhone connected. You will not lose any contacts if the app on your computer has at least one contact. -
Trying to upgrade to Lion on my 20" iMac that I bought in Nov. 2007. Currently I'm running on MAC OS X version 10.6.8. When I tried to buy the upgrade I got a response that Lion requires 2 GB of memory and I only have 1 GB. How can I get more memory and will my computer be compatible with Lion when I do get more memory?
Yes you can install more RAM. Up to 6 GBs. Two - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMMs. For the maximum use one 4 GB and one 2 GB. Otherwise install a pair of 2 GB modules for a total of 4 GBs.
You can purchase suitable RAM at DataMem or OWC. OWC also has video tutorials on installation. -
I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try. -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
Help!Mark,
Sorry...
I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
My apologies and please ingnore those parts of my last post relating to the PPC Macs...
You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer) but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
If the Logic Pro App is in your applications folder..
Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
Run Logic
Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers... -
I am trying to install xcode on a macpro running OSX 10.6.8 . It installs, but with the error that there is no unix support. Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?
thx,
PandabigXcode 4.x cannot be installed on Snow Leopard. You need a 3.x. So if that is what you used then yes, you need to install lion. If connect.apple.com still alows registration or logins using an existing appleid then you could download the last xcode 3.2.6 for free.
-
I have a new airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?
Welcome to Apple Support Communities
If you purchased the computer before 2010, your computer hasn't got Thunderbolt, so you can't use it -
Essentially, the CMS we use to manage our website (mainstreetartsfest.org) is Sitefinity, and apparently it doesn't support the newest version of Firefox. And, from what I understand, this version of Sitefinity is not being upgraded at the support level - we are now being asked to spend $$ on moving to a new CMS to support the browsers. Chrome, Safari also a problem. Only IE works, and we all have Macs. I want to know if we can have the older Firefox AND the upgraded Firefox both on our computers so we can use the new Firefox for general browsing, and resort to the older, 3.2 version for managing the CMS. I know I can download a previous version - but I would rather not replace our new version of Firefox in the process.
You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
I have PowerBook G4, running 10.5.8. Went to upgrade and says OS too old. I went back to older version of foxfire. Now I have a circle with a line through it and when I try to open it I get,You cannot open the application “Firefox” because it is not supported on this architecture. Thanks for the help.
Firefox 3.6.x is the last available from Mozilla for PPC Macs. <br />
http://www.mozilla.com/en-US/firefox/all-older.html
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/<br />
http://tenfourfox.blogspot.com/ <br />
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
Maybe you are looking for
-
Using application or entity services as model?
Hello, is it a bad decision to access the CRUD and findBy operations of my entity services with UI patterns? The book "SAP xApps and the Composite Application Framework" says, only application services should be used to handle with the UI, according
-
Workstation specs -- Any problems with this system quote?
Here are the specs I have been quoted. I'm not terribly knowledgeable about hardware, does anyone see any problems with this system? I have recently started shooting and editing weddings, engagements and corporate videos. I think it may be bit mor
-
Generating pdf files from htp.p input
I have a procedure that generates htp.p coding is there any way that i can use this procedure in oracle reports to create a pdf file?
-
Truetype fonts displaying blank in CS 5 apps
Howdy, We have some fonts of ours which show up in the font menu, but when you change to that font, it displays nothing. Say you type a sentence, then select it and then change the font its using. Blank!!!!, looks like it dissappears. But if you move
-
Is it possible to extend your free trial?
I'm new to this and was just wondering how if you can request to extend your free trial, if so, for how long?