The upload video to the web button does nothing, It was working yesterday but the upload failed.
Yesterday the upload to web function was working fine, this is my first attempt to up load a video to you-tube. It failed yesterday as the library closed and I lost my internet connection. I reworked the video some, rendered it and when I pushed the upload to web button, nothing happens. I am connected to the internet, what is up ?
Homefree223
I have just finished two successful uploads to YouTube at the YouTube web site, both were 1080p60 video (H.264.mp4 produced in Premiere Elements 11 with a target bitrate of about 32 Mbps (megabits per second) and maximum bitrate of about 40 Mbps (megabits per second). The uploads at the YouTube web site went without problems and the quality of the video displayed on YouTube was good. The point of all this was to demonstrate that at this time YouTube was not experiencing problems with a 1080p60 upload at its web site and that the quality of the finished upload was good. Depending on file size requirement, bitrate rates higher than the above can be looked at.
But let us recap to make sure that we have not mis-communicated on any of the details. Please correct me if any of my assumptions were incorrect:
1. You have a 1080p60 Premiere Elements 11 Windows Timeline (Expert view) and you export that to file and then upload that file at the YouTube web site. We have not gone into the specifics of the properties of the Premiere Elements 11 generated file being uploaded, but probably are:
Publish+Share
Computer
AVCHD
MP4- H.264 1920 x 1080p30 (p30 converted to p60 in the settings under Advanced Button/Video Tab...bitrate used Target 32 Mbps and Maximum 40 Mbps)
or
2, Instead, you have been trying to upload your 1080p60 Timeline direct to YouTube from within Premiere Elements 11, via Publish+Share/Online/YouTube where you might be setting Presets = "High Definition Video for YouTube - 1920 x 1080"? You realize that the frame rate for the preset in this case is 30 frames per second, not 60.
If "2" is the focus of the problem, then try approach "1" to determine if that works for you. The disadvantage of the direct upload from within Premiere Elements 11 is that there are no adjustments available for the preset used. It is, what it is.
2. Also, what did you mean by:
"It failed yesterday as the library closed and I lost my internet connection."
Please review the above. I am heading to my Premiere Elements 11 Windows to try approach "2" which I have not yet.
Thanks.
ATR
Similar Messages
-
Adobe captivate video publisher upload button does nothing
Hi, on 2 different machines, the adobe captivate video publisher upload button does nothing. Add to that support says it's not available when I called in on a trial product. Hmmm if you won't help BEFORE I buy, what will happen after? c'mon... i've purches thousands of dollars worth of adobe software and currently own the creative cloud ...and I get the brushoff like that? Oh and the chat system wasn't working becuase the queue was too full....
lol. Great day. Just not for Adobe! . Worked fine on my older imac 27", but not my 2 new machines at work... macbook air and pc with a lowly 24gb ram... go figure.
-
pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.
Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc. -
My iPhone 4 will not power on. When connected to iTunes via my computer, it is recognized and shows fully charged battery. Pressing and holding the sleep/wake button does nothing; just a black screen. Any suggestions?
Only way is to bring it to the Apple Store and use the warranty if it hasn't expired
-
Hi, my Ipad was working fine but if I try to send an email, a note pops up that my email address has been rejected by the server, what does this mean? I am still receiving emails and can access websites through Safari.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
I purchased an iPod Touch 5 64gb mint condition, it was working great but I reset it and now it's asking me for an Apple Id. Problem is it want the original owners & not mine. I would have no problem contacting the person I bought it off of but I no longer have their information since when it worked I deleted the emails!
Does anyone know how to bypass this problem so that I can have the ipod work for me and my Apple ID?
I would even take it to Apple if they could fix it, would they? and what might that cost me?
Any suggestions would be great!!!!Nope. Only the previous owner can do that. See:
iCloud: Find My iPhone Activation Lock in iOS 7 -
I keep getting "Unable to connect" for my firefox. It was working yesterday and I turned my computer off. I can get to the web using internet explorer 9. I don't know why my firefox is not working. Everything else is working.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
I own a I phone 4. I recently changed my service from AT&T to Straight Talk. It was working fine but then I deleted the vpn file on accident. Now when I try to get on line I get a message that I am not signed up with a cellular data network. Does anyone know how I can retrieve or download the vpn file?
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?
Hello mate!
Are you sure u have the option on the up-right side of the arrange window checked to x-fade? -
I just replaced my iPod 5th gen. a week ago, and it was working fine, but when I went to go turn the screen on, it wouldn't turn on. I've tried to put it on the charger and it wouldn't charge and it wont connect to my computer, how do i fix this? I tried to reset the iPod, by pressing the home and power button but nothing works. It's literally a brand new iPod, I dont know what to do now. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
exception-type in web.xml does not appear to work
WLS 60 SP1 (#101616)
<exception-type> in web.xml does not appear to work. WLS shows standard
"Internal error 500" page instead of a custom error page. The custom error
page is shown if <error-code> is used instead of <exception-type>.
Any ideas? Thanks
Can you show me some of your code? This works for me.
Also, you say that you are working with 6.0sp3. Are you sure? sp3 hasn't been
released yet, except in a very limited beta. (I believe only internally, but I
could be wrong about that.)
David
[email protected] wrote:
Hi all,
I have created a very simple servlet and an index.html file with a link
to it, then packaged it into a WAR file with the appropriate web.xml and
ias-web.xml files. I then created an application.xml file referencing
only this servlet and adding a context root. After deployment via
"iasdeploy deployapp simple.ear" and cycling the web server, I can reach
the welcome file (index.html) correctly
-"http://localhost/NASApp/simple". When I attempt to follow the link to
the servlet ("simple servlet") the URL ends
up as "http://localhost/NASApp/SimpleServlet" whereas it should be
http://localhost/NASApp/simple/SimpleServlet If I type that url in, the
servlet executes fine.
I've deployed this into Tomcat and get the behavior I expect. It appears
that the element in the application.xml file is ignored by
iAS.
I'm using iAS SP3 on Win2k (same problem on NT).
This is such a basic behavior that I can't believe this is an existing
bug. I must be doing something wrong...
Any ideas?
Thanks in advance,
-Glen
Files are attached.
Name: simple.ear
simple.ear Type: application/x-unknown-content-type-ear_auto_file
Encoding: base64
Description: filename="simple.ear" -
CP1025nw, repeptetive smudges, poor print quality, pushing toner button does nothing.
I haven't used this printer in a couple of years, so I sense some of my issues might be related to that. First up, the print quality is quite poor. Despite having a new black toner cartridge, the B&W printing isn't very strong; it's blotchy in some areas with random spots in others. Second, there are repeating color splotches all over the place. I've attached a photo. Third, pressing any of the toner buttons does nothing, no beeps, blinks, or movement. So far, the only things I've tried was toreplace the black toner cartridge and blow out the interior of the machine with compress air. I also removed the drum and gave that a quick and careful cleaning.. Any thoughts?
Hi , Welcome back to the HP Support Forums! I understand that you're experiencing print quality issues on your HP LaserJet Pro CP1025nw. I would be happy to assist you with this. Please try the steps in this document to see if it will help resolve this issue. Resolving Print Quality Issues. If you get to Solution eleven: Replace the problem print cartridge. I recommend you call technical support before you consider replacing the cartridge. Contact HP Technical Support: What you can do, is use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.
I hope this helps. -
I have the Adobe Creative Suite app installed (for CS6) and wish to upgrade to CC. When I go to the app center and try to download one of the software apps, pressing the Download button does nothing.
I read here that someone said to delete Adobe Air and reinstall, which I did, but the Download button STILL does nothing.
In particular, I'm first trying to download Illustrator CC.
Any ideas?
HeidiTry to perform following steps and let me know.
WIN 7 and 8 (64 bit):
Rename OOBE to OOBE_old located at C:\Program Files (x86)\Common Files\Adobe
Relaunch the Browser
Go to https://creative.adobe.com/products/creative-cloud
Sign in with Adobe ID and password and download CC desktop app.
WIN 7 and 8 (32 bit):
Rename OOBE to OOBE_old located at C:\Program Files\Common Files\Adobe
Relaunch the Browser
Go to https://creative.adobe.com/products/creative-cloud
Sign in with Adobe ID and password and download CC desktop app. -
IBook won't start up - power button does nothing, PMU reset not helpful
Hi all - I was using my iBook earlier this morning and it just turned itself off without any warning. It was running off the battery, but had plenty of charge, and there was no 'low power' warning, so it wasn't that.
I can't get it to turn on now. Pressing the power button does nothing - no whirring, beeping, chiming or anything else. I tried resetting the PMU to no effect. No lights appear on the caps lock button. I haven't tried using the Mac OSX cd, but I'm a little afraid I won't get it back out of the slot-load drive with the way the computer is behaving.
I have it plugged in now and it seems to be charging the battery, so I don't think it's related to either power or battery issues. In fact, it seems the power and battery are the only things working! Absolutely nothing else happens. Unresponsive.
My warranty ran out in September (November now, unfortunately) so if it needs servicing I suppose it will be out of my own pocket.
Can anyone help?
Mark
iBook G4 Dual usb 14" Mac OS X (10.4.8)Ok - good news. I've got the problem fixed.
After a call to Apple Support (called the Canadian one), and a $59 charge (worth it, in my opinion, since my warranty is expired) the gentleman on the line asked me to do a PMU reset with the SHIFT + CTRL + Option + Power combination. That's what I had tried before and it didn't work. Didn't work this time either.
Next, he had me remove the battery, unplug the computer from the adapter, and hold the power button down for 5 seconds. I put the battery back in, plugged it back in, and turned it on.
Voila. Works like a charm. Apparently, there are two ways to do a PMU reset.
Thanks everyone for looking at my thread, and thanks arnie for the responses. -
Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" I can't seem to send any messages either? I can use the Internet fine and everything else on the phone. Can anyone help?
Hi chelsinator,
You can reset the phone and it won't cause any problems or cause you to lose any data - Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears.
The other thing you should do is to reset your network settings: Settings>General>Reset>Reset Network Settings. You will have to set up your Wifi again, but that oftentimes clears things up.
Cheers,
GB
Maybe you are looking for
-
how to configure the CSS to load balance 2 DNS server ?
-
I have Sigmas 150-500 on Pentax. LR keep saying it's a Sigma 70-200 F2.8 EX ... What to do?
-
How to see an exisitng SAP Exit?
Hi gurus how can i see the exitsing SAP/Customer Exits. Thanks in advance Peter
-
ATI/AMD Catalyst 11.1 - Seems Good
I just updated to the recently released ATI Catalyst 11.1 drivers for my VisionTek Radeon HD 4670 1 GB card, and they solved an OpenGL app crash problem I had just discovered in 10.12. Note that this problem was not observed in Photoshop proper, but
-
Preventive Maintenance date calculation
HI, I am having a counter with 161 KM. Annual Estimate is 20000. Start date for plan is 04.11.2010. I want to take maintenance for 1000KM. Now the reading is 161 KM. After scheduling in IP10, the system calculates Next planned counter reading as 1