The usb cable won't stay in my m515

It won't stay in tight enough to charge the device.  Is there some way I can make it tighter or do I have to get a new cable?  Also how do I access the user manual.  It says it's in the software, but I can't find it.
Post relates to: Palm m515

If the cable won't stay connected, you will probably need to replace the cable.
If you have the CD that came with the device, browse the CD and look in the English folder for the user guide.
Another option is to go here for the user guide.
http://kb.palm.com/wps/portal/kb/common/article/47831_en.html#m505
The m505 handbook states it is for the m500 series. It should have the info. about your handheld.

Similar Messages

  • I have a iPad one I'm trying to update and the USB cables are not letting me... The work on my 3GS phone but when I plug in my iPad it does nothing not even in iTunes it won't even charge my iPad y is it working on my phone and not my iPad please help me

    I do a lot on my iPad and now some almost all the stuff I do on it won't download cause well my iPad is out of date I know how to update it but want to know is why USB cable won't work with my iPad u can hear it sync to the computer but it won't sync to I tunes I just don't get my phone will sync to I tunes with the same USB cable what am I doing wrong please help me

    This is the ipod touch forum

  • HP 3050 won't print unless the usb cable is plugged in...

    So I've installed the software/driver from the HP website, printed a wireless test page, but it will only print stuff unless  the usb cable is plugged in. What am I missing? I try and print say, a recipe; and nothing happens unless/until I plug in the usb cable to the printer, THEN it prints just fine. I've selected a "network" connection and it has the right IP since it will print a test page just fine... what's up? anyone know?
    regards, mitch

    Ok, I should have checked printing using something OTHER THAN the site below and I would have realized the printer is functioning just fine everywhere but the site below that I was trying to print wirelessly:
    http://www.marthastewart.com/print/868426
    Other recipes on other sites are printing just fine as is everything else! Just not o'l Martha... it will print the recipe from the site above however "if" the usb cable is plugged in.
    go figure.

  • HT1572 the charging light won't stay on - I have to close and re-open the I Tunes app

    I have a new HP laptop. I don't know if it's a coincidence, but my charging light won't stay on. I have to keep closing and re-opening the I Tunes program. Is the battery shot or what?
    Thanks.

    Depending on how often you use your shuffle (how many charging cycles it's been through), a 2nd gen shuffle from 2008 could have a worn out battery.
    Battery charging is not dependent on iTunes running.  If you connect it to the laptop without iTunes running (or even installed), it should charge.  If you connected the USB cable to one of those USB power adapters, it should charge.  It just needs a USB 2.0 port with power.
    When you connect it and run iTunes, does the shuffle still appear in the iTunes sidebar?  Can you still sync it from empty to full?

  • Can no longer charge Nano with the USB cable

    My iPod Nano (1st gen) won't charge via the USB cable any more. It will sync if there is enough battery life when I hook it up to the USB cable. However, if I leave it hooked up, it gets drained of all it's battery life. Fortunately I have a wall charger and a car charger and both of them will charge the Nano. It's a lot more convenient for me to charge it via my computer, but that's not possible any more. Is my Nano dying or is it possible the USB cable is damaged? If it's damaged, how can it sync but not charge? Why can I charge with other power sources but not the cable? Unfortunately, I don't have another iPod cable to test if the cable is damaged. If my Nano is dying, can you give me a rough estimate as to how long it will be before it stops charging all together. (I need to prepare my spouse for the upcoming iPod Touch purchase that will appear on credit card.)
    Thanks.........Julie

    Here's my own trial and error analysis of my problem. I hooked my iPod up to my old G4 PowerBook and tried to charge it from there. It didn't charge but it also didn't lose any more power that I could tell. I then hooked it up to my MacBook's first USB slot. I heard that the first slot has more power than the 2nd slot due to the way the 2 USB ports are configured. Unfortunately, the iPod appeared to have lost some power, i.e. the USB port drained some of the power from the iPod.
    I'm guessing I need to take it in to have my USB ports checked out. I prefer to take it to an Apple store with a Genius bar that is 3 hours away instead of to our "local" Apple repair shop that is an hour away. I have Apple Care and I believe my local shop will still charge me for time.
    Thanks for the suggestions. Until I find a day when I can take the long drive, I'll just charge my iPod from with a wall charger. I'm grateful the iPod syncs and I have an alternate way to charge.

  • My ipod 1st gen battery went totally dead because the usb cable was defective. I've changed the cable.  now when i connect my ipod to the netbook, itune is not launching automatically and windows does not recognize it......how can these issues be resolved

    My ipod 32gb 1st generation battery went totally dead because the usb cable was defective.  I have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it.  Nonetheless it is charging.  However can i resolve these issues bearing in mind that i am not tech savvy?

    have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it. 
    Try disabling a/v software and turn off the Firewall on your PC.
    Disable antivirus software
    Turn-Windows-Firewall-on-or-off
    Then connect the iPod to your computer. Launch iTunes. If your computer still won't recognize the iPod check out this article.
    http://support.apple.com/kb/TS1538
    Once your iPod is functioning again, with it connected to your computer, launch iTunes. Select the iPod under Devices in the source list on the left.
    Select the box next to:   Open iTunes when this iPhone is connected
    That way iTunes should open automatically when you connect your iPod to your computer.
    And iTunes / Preferences - Devices. You can have your iPod sync automatically whenever it's connected from the Devices pane.

  • HT1386 I have iTunes (up to date) and an iPhone 4s. When I connect it using the USB cable it does not appear in the top right corner. Other devices do and also the cable is fine as it charges and the PC sees it as a device. I've looked online and have no

    I'm new to this and I think I typed a long heading!
    Anyway the issue is I have iTunes and just updated it to the latest. I also have various Apple devices however my iPhone won't sync with iTunes. When I connect it using the USB cable it does not appear in the top right corner as does other devices. The cable is fine as it charges and also my PC sees the device. However it does not appear in iTunes so I can't sync music to it.
    I've searched the web but all asume iTunes can see the device.
    Help!?

    Hi David,
    If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may find the troubleshooting steps in the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • [SOLVED]If I see "Maybe the USB cable is bad?" one more time...

    Hey guys, having trouble with all USB devices on my computer. Doesn't matter where it's plugged in, even on a USB 3.0 expansion card, and doesn't seem to matter what device it is either, I'm struggling with this:
    [ 268.656687] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 272.626205] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 276.598295] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 280.565223] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 280.791874] usb 8-7: new high-speed USB device number 13 using ehci_hcd
    [ 280.868601] hub 8-0:1.0: unable to enumerate USB device on port 7
    [ 284.968029] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
    [ 288.937553] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
    [ 292.907066] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
    [ 296.876583] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
    [ 299.715911] device eth0 entered promiscuous mode
    [ 308.558490] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 312.528011] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 316.497519] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 320.467042] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 320.783672] usb 8-7: new high-speed USB device number 22 using ehci_hcd
    [ 320.863708] hub 8-0:1.0: unable to enumerate USB device on port 7
    [ 324.963154] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
    [ 328.932674] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
    [ 332.902188] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
    [ 336.871716] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
    [ 351.053314] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 355.022842] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 358.992346] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 362.961869] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 374.003868] usb 1-2: new high-speed USB device number 2 using xhci_hcd
    [ 374.018495] usb 1-2: device descriptor read/8, error -71
    [ 374.135238] usb 1-2: device descriptor read/8, error -71
    [ 374.290509] hub 1-0:1.0: unable to enumerate USB device on port 2
    [ 374.517127] usb 1-2: new high-speed USB device number 4 using xhci_hcd
    [ 379.053245] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 383.022766] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 386.992283] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    That's me unplugging and replugging a device in different places. Note that the message appears multiple times each time I plug it in.
    But this isn't just that one device (a galaxy tab if you're wondering). This happens with so many devices I'm going up the wall. It even happens with USB Flash drives! "I'LL JUST USE A DIFFERENT CABLE OH WAIT COMPUTER YOU'RE AN IDIOT."
    Sorry, just so frustrated. I've tried the classic capacitor flush (turn off, hold power button in with power calbe unplugged) and it's been doing this for a while, so updates haven't solved it. Different types of devices too, not just storage. Even a keyboard did it one time. You guys got any ideas at all?
    EDIT: Before that inevitable post comes, yes, I've plugged it directly into the ports that are attached to the back of the motherboard, please don't ask, please, please, please. I know someone won't read this whole post and will ask anyway but a guy can try.
    EDIT EDIT: I forgot to actually say that usb devices do not work when this message appears.
    Last edited by MisterAnderson (2013-03-17 04:56:42)

    If the errors are consistent across OS (ie LiveCD, Windows?)  then your motherboard is most likely on it's way out and needs replacing
    You could try removing the motherboard cell battery and doing the "classic capacitor flush" again. Leaving the battery out for a period of time generally has the same effect and in "classic" IT style fixes numerous woes... have you tried a different cable?
    If, after replacing the battery, the problem has disappeared I would still treat the hardware as suspect and have it replaced as soon as possible. These sorts of brain farts typically reappear sooner rather than later

  • I cant figure out why my HTC Droid DNA is no longer recognized by my computer when i hook it up with the USB cable that came with the phone.

    I used to be able to just plug in my phone with the USB cable to my Windows 7 computer and browse phone storage with no issues. Now my computer sees it as an android phone but when it tries to automatically install the drivers for my phone on the computer, i get an access denied error message. No option on the phone that i can see that allows me to mount phone as a usb drive. This used to work just fine with nothing more than just hooking up the cable. What gives??

        Let's get that access granted again, e_rock_b. The HTC DNA doesn't have a special USB Mass Storage Mode that needs to be turned on. Usually, it's as simple as connecting and browsing http://vz.to/1jktbZD as you mentioned. If your computer is no longer allowing that easy access, try the steps at http://vz.to/1jktvr6.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Why does only the USB cable that came with my phon...

    I recently acquired a Nokia Lumia Icon from Verizon.  I have a Lenovo Yoga Pro 2 computer running Windows 8.1 with the Windows Phone App for Desktop (WPA4D) installed.  I had a very difficult time getting my Icon to be seen by my computer when connecting it with one of the half dozen micro USB cables I have laying around.  WPA4D would not recognize it.  Then, I connected it using the USB cable that came with the phone, and WPA4D immediately recognized it.  Then I unplugged it and went back to a different cable - it was again not recognized.
    What is different about the USB cable that ships with the Nokia Lumia Icon?  If I want to order more, like from Monoprice, what do I order to get the same thing?  Why is Nokia (apparently) using some sort of proprietary cable??
    Thanks,
    Eric

    It is not proprietary.The charging/data cable for my GPS works.
    A lot of the cables are just for charging and that is all they are wired for and they don't even have the data pin. Full size USB cables are the same way.
    If I needed an extra I would get it from Nokia.

  • My iPhone 3gs has frozen after trying to update to 5.0.1 and will not turn on or off. Only showing the iTunes logo and the usb cable on the screen. What can I do to fix this?

    My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?

    Here are Apple Steps: http://support.apple.com/kb/HT1808

  • When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

    When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

    iOS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

  • When I plug my phone into my PC with the USB cable an ad starts playing on my PC. How do I stop this?

    When I plug my phone into my PC with the USB cable an advertisement starts playing on my PC. The advertisement is for an add-on product called Backup Assistant Plus. How can I stop this?
    I read of a work-around to stop this, but it does not meet my needs. The work-around is to change your USB connection option from "mass storage device" to the one of the options about uploading pictures. This would not work for me because I'm connecting the cable so I can access the phone's memory as a mass storage device!
    This is a seriously obnoxious problem affecting millions of people. It's a common conversation in bars, and all the iPhone fans are saying--yea, I told you so, stuff from Motorola is junk. I'd recommend that it be fixed as soon as possible!
    Model: Droid Razr
    Android version: 4.0.4

    Yes, you can stop it. When you plug in the phone, down in the lower right of your screen, click and pull up the Motorola Device Manager. Do as you please with it.

  • My ipod touch is stuck on a screen that shows a picture of the USB cable with an arrow to "itunes" and pic. of a CD with a music note over it....what do I do?

    My ipod touch is stuck on a screen that show  a picture of the USB cable with an arrow to a picture of a CD with a music note over it.  I have reset and turned on and off.....what do I do??

    Connect it to iTunes and restore it.
    B-rock

  • Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

    Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
    thank you for your help.

    Hi there beni_m,
    You may find the troubleshooting steps in the articles below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

Maybe you are looking for