The USB Device you have connected has malfunctione...

Hi All, I am facing an issue with a 6681 phone while connecting via Cable to my PC. My configuration given below:
OS: Windows XP
Device: Nokia 6681
Connection method: Data Cable
PC Suite Version: Came with the mobile
Problem:
1. It was working fine for a month. But now, I am getting the following balloon message: "The USB Device you have connected has malfunctioned and Windows does not recognise it".
2. Strange thing is, it is working fine with my office machine, having Win XP.
3. I am able to connect my camera to my home PC, so it is not a hardware issue.
4. Tried uninstalling and reinstalled again, no change, getting the same error message: "The USB Device you have connected has malfunctioned and Windows does not recognise it.".
Someone please help.
Thanks,
Sunil.

Hi teurastaja,
Thank you for your response. I tried the same, but again getting the same message. It started detecting the device, then tried to install the drivers, finally it is saying, "An error occured while installing drivers. Your USB device may not be properly". After that, I am getting the previous message continously in the tray with the header "USB device not recognized". Also, I am getting the cable connection icon in the phone screen just for 2-3 seconds. After that it is diappearing. Can you suggest any solution?
Thanks,
Sunil.

Similar Messages

HT1369 Yes, my cousins Ipod is disabled and I connect it to itunes and it will not connect, it says "the device you have entered has a pass code, enter the passcode to connect." The problem is the keyboard to type in the pass code will not show up. What d

Yes, my cousins iPod is disabled. It says "ipod is disabled, connect to iTunes", I did that and it will not connect to iTunes, because it needs the pass code. The pass code key board will not show up and I cant connect. Please help me figure this problem out, my cousin is depending on me. Thanks, a concern customer.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

HT1766 What if an ipad is the only device you have from Apple? How could you back your things up with the cloud ?

Hi my issue is that I dropped my ipad, and the screen is now blue. I have tried pressing the power button and the center button (I even pit it on the charger), but the screen is still blue. My questions are am i covered to get a replacement, and how do I back-up my stuff with the cloud if the ipad is my only apple device?

If you didn't have iCloud backup turned on before you broke it, you are out of luck.
Accidental damage is not covered by warranty.
You can get an out of warranty replacement from Apple for around $250.

Is there a limit as to how many devices you can connect with Edge Inspect?

Is there a limit as to how many mobile devices you can connect with Edge Inspect?
Also, do we need a dedicated wi fi hub for all these devices? Are there any wi fi limitations with connecting more than 20 devices and connecting to wi-fi?
Thanks

The free version of Edge Inspect limits you to connecting to one device concurrently. (You can certainly disconnect from that one and connect to another if you wish, but it's just one at a time.)
If you purchase an Edge Inspect subscription, or have a paid Creative Cloud membership, then you can connect an unlimited number of devices concurrently. (Note that I have seen up to 35 connected at once.)
For info on purchasing options, see this blog post: http://blogs.adobe.com/edgeinspect/2012/10/23/how-to-purchase-edge-inspect/
It does not have to be a decicated wifi router, although it certainly can if that makes sense for you. For example, at my home I have a single wifi router that I always use for my laptops and video streaming devices, with my desktop computer connected to the same router on Ethernet, and I can connect my 5 tablets and 2 mobile phones to Edge Inspect on the same router with no issues.
My router says it can support up to 250 connections at once (Ethernet + wifi); however, I have nowhere near that many devices so I could not put that to the test. I think a more reasonable limit is around 30; however, that is just based on having to share bandwidth. You might want to check what your router says is its limit.
Just keep in mind that the more devices you have downloading data, the slower the performance will be.

"You have connected two terminals of different types" Index Array won't work

So I have a 3D array finally. Now I want to index that array and display the contents of a certain element on a new array. When I index a 2D array, this method works just fine. But when I change it to 3D array, Labview gives me the following error:
You have connected two terminals of different types. The type of the source is string. The of the sink is 1D array of string.
So I'm assuming the 1D arry it speaks of is referring to the indicator array that the index should spout out the contents of the element I'm looking for. And the source string is the 3D array. I've tried changing the dimensions of the 1D array to match that of the source 3D array, but nothing is working yet. I've attached a pic of the problem below.
Attachments:
LVerror.JPG ‏20 KB

This might be another problem of understanding what the data represents. You are telling the code that you have a 3D array, and you want to pull out a single element, a scalar string, by specifying the row, the column and the page to find the data. But then you are trying to display this single item into a indicator that is a 1D array. You are trying to display a single cell of data, into a column of data. Either replace your 1D array with a scalar string, or when you index your array specify a row or column to display.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

HT201210 you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues th

you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues that could prevent you from restoring. After restarting the computer and iOS device, attempt to restore again.

How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library.   Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.

I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

I bought an iod touch 2g off of my friend and when i plug it in to my compter it says to connect to itunes on the ipod screen and then a pop up on my comp appears saying usb device not rcognized the usb device has malfunctioned on both of my comps it does

can anyone help the exact message is one of the usb devices attached t this computer has malfunctioned and windows does not recognize it for assistance solving this problem, cick this message please elp i dont want to have been ripped off Dx

and i went through all the steps but i dont have any disk that step 3 asks for i bought it off of a friend and ive tried it on 2 computers alredy and the same message appears... on my other ipod touch 2g it works fine so i dont think its the usb port any ideas?

Cant Charge/connect ipod touch. Get an error saying "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" . HELP.

Ok . so my ipod touch 2G , used to be all ok . its just yesterday i went to charge my ipod it wouldnt do anything . Then after being plugged in for a bit , i got pop up saying " "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" .
Ive tried plugging this into 3 other computers same error message pops up .
PLEASE help me . thanks (:

Uninstall your USB drivers in your computer & reinstall.
contact your pc manufacturer for the steps.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

My computer will not recognize my iPod Nano when i connect it. I tried my laptop instead but it said the same thing - one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it. Can i fix this?

My 16 gig iPod Nano 7th gen was put of power. I connected it to the computer and it started to turn on (the apple appeared in the middle of the screen). Then left it two minutes and the computer went into sleep mode. My iPod nano had gone off and now it will not turn on, or connect to the computer, so i cannot charge it. I am not sure if it is a problem with the usb cable. When I conntct the cable to the computer nothing happens, but then when i connect the iPod to the cable it says 'one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it'. Please don't say its broken already

It probably needs to be reset. The procedure is different for different Nano models: http://www.apple.com/support/ipodnano/assistant/itunes/

"The last usb device you connected to this computer malfunctioned"

I am trying to restore my iPod Touch 5 that's in Recovery Mode and this message appears,"the last usb device you connected to this computer malfunctioned" on the bottom right-hand corner of my Windows 8.1 Screen. Please Help!!!

Reboot the computer
Try another USB port
Try another cable

HP Laser M1522NF the USB device attached to this computer is not recognised and has Malfunctioned

Hi,
I have this printer HP Laser M1522nf.It was working fine till today.Suddenly it has started giveng this error
"HP Laser M1522NF the USB device attached to this computer is not recognised and has Malfunctioned"
This error is not on printer but on my computer when I connect the printer USB cable.I have 3 laptops all have winxp installed on them.I have tried connecting the printer with all laptops and they all give the same error with reference to connecting usb printer cable and Malfunctioning.
Appreciate your gracious advice and guidance in this regard,
Many thanks

Is this at an office and you are logged in not as an administrator?
If that's not the case, then the message maybe true, that it did malfunction, and need to be serviced. (assuming you already tried power cycle the printer, making sure doors/trays are all properly put in.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.

I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
Windows 7 and iPad 2
Kind regards,

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detected

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

IProblem: "One of the USB devices attached to this computer has ...."

Hi, I'm having a problem with my iPod.. when I connect the iPod this message pops:
"One of the USB devices attached to this computer has ...."
I've searching a similar problem in the forums, and I have found many discussion about it, but any of them can solve my problem.
Well, all began like this, the iPod was attached to the computer AND showing on iTunes, suddendly the screen shines I DID NOT Eject it (the iPod was on its menu, not in the Do not disconnect screen) so I thougth it was ok... but the iPod was still showing on iTunes, so I ejected.
The iPod remains connected for about an hour then I disconnect it without any problems. The problems began when I connect the iPod again (2 hours later), the message "One of the USB devices attached to this computer has ...." pops, now my computer can't access the iPod (it isnt on My Computer or iTunes)...so the first thing I did was search a similar problem in the forums, I've found that exact problem in many discussions, and I've tried everything they say:
1. The Five R's
2. Uninstall and Reinstall iPod software and iTunes
3. Enable manually disk mode (still not recognized)
4. Check if the USB was low powered and Uncheck the "Allow the computer to turn off this device to safe power" (it isn't low powered 'cause the iPod was working with that USB)
No matter what I did, the iPod is not showing on My Computer, I hope you can help me out, tomorrow I will try on a different computer and a different cable
PD: Sorry for my poor English, I'm from Peru.
AMD Athlon XP 2400+ Windows XP Pro

I've got the same issue, looked everywhere, no solution seems to work.

The USB Device you have connected has malfunctione...

Similar Messages

Maybe you are looking for