The USB ports on the right side are not working.

HP G71-340US NOTEBOOK

tstevenson08,
It sounds like a hardware issue honestly, as discussed in a previous thread regarding this issue.

Similar Messages

  • HT1379 The USB ports on my 30" Cinema are not working.  The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks.  I need to move the computer between two locations, and the other monitor is a 27"

    The USB ports on my 30" Cinema HD display appear to not work.  The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display.  Now I need to move the computer back and forth between two locations using the two displays.  The need for operating USB ports is essential.  Any ideas.  The display appears entirely normal.  Am running OS X 10.9.

    Disregard, problem solved.

  • USB Ports on my MacBook Pro are not working

    My MacBook Pro (Original) USB ports recently stopped working. They come up in system profiler as being there, but when I connect a device, such as a flash drive, no leds turn on, and no power is given to it. I have tried resetting the SMC and PRAM, but all to no avail. Does anyone have any suggestions? Thank you in advance for your help

    I had a nearly identical issue today with a new CTO MacBook Pro...specifically, the USB ports on this new unit were unresponsive to devices being plugged to their slots. We reset SMC to no avail, unplugged all other non-essential peripherals, and still no change.
    We were specifically trying to boot a previously functioning Seagate hard drive with a fully intact install of Snow Leopard. Eventually the MBP detected the drive and read the contents. We selected the externally connected drive for startup (which S/L found without issue) in System Prefs. At boot, no progress further than Apple logo (without animated gears indicating some type of load process).
    Moved to an identically equipped secondary Thunderbolt MBP which presented with exact same issue. To further verify this was an issue with the USB ports on a Thunderbolt model MBP, we attempted boot of the externally connected drive to an iMac and then a MacMini. Both of these units booted the drive without issue. The Thunderbolt MBPs can see the drive, read the contents, but can't boot them.
    Disk Utility verified and ran repair on the external drive and reported zero problems.
    Both MBPs are being returned to Apple. Too much to risk for only having two USB ports.

  • On certain sites (like chats), the shift symbols are not working correctly.

    On certain sites (like chats), the shift symbols are not working correctly, but shift+letters works fine. I've tried changing the set keyboard language, as well as the character encoding, but nothing works. I don't have this problem in IE.

    Hello there.
    Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
    As for your issue, I'm not sure if this is the case, but there is a little know keyboard shortcut to change the keyboard language on Windows. And it's very annoying, since it's easily triggered. I don't know exactly which one it is, but I think it's CTRL+SHIFT, the ones on the right. I suggest you ask Microsoft for support on this one. Firefox doesn't control keyboard languages.

  • The internal speakers are not working on my macbook pro

    the internal speakers are not working on my macbook pro

    Are they selected under System Preferences>Sound? Or do you see something such as "Digital Output" listed instead of "Internal Speakers"?
    It may be that your digital out switch is 'stuck.' This usually happens after using headphones and you can usually see a red light coming from the audio out port. You can 'fix' this by plugging and unplugging a headphone jack repeatedly until the switch is reset.
    Clinton

  • I have a macbook air and I can't cut and paste in itunes.  The right clic does not work. How can I work this out?

    I have a macbook air and I can't cut and paste in itunes.  The right clic does not work. How can I work this out?

    Great tip Stephen!!
    I was so frustated from this issue that I used to use Windows iTunes for mass editing info, adding Lyrics etc and then transfering songs to Mac. This tip has alleviated my pain!!
    Thanks for the tip. This question should be tagged as answered.

  • I have a Excel file which has lots of PDFs embed as a link.  When i converting to PDF the embed links are not working. Please help to slove this issue.

    I have a Excel file which has lots of PDFs embed as a link.  When i converting to PDF the embed links are not working. Please help to slove this issue.e

    I am also looking alternative way using inDesign to create the embed link as like as excel. is there any possible? Thanks for you reply

  • The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem.

    The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • The figure links are not working

    The figure links are not working in the latest ADE 4.0.3. The same ePUB figure links are worked perfectly in ADE 3.0.

    Your navigation is covering some of your links. You should send the image to the back & or crop it to just the red box.
    How I create navigation menus:
    http://jeffnitschke.com/Video.html

  • I had to get a new keyboard and now the keys in the upper row are not working appropriately. How can I fix this problem?

    My keyboard stopped working so I went to the apple store to replace it with another one. Now I am back home and the keys at the very top are not working correctly (volumn  F12 shows the dashboard, F11 takes the screen up and away, F8 pause button shows spaces, etc.). What should I do to correct this problem - I assume I probably need to download some type of softwear but what? I have a Mac OS X  Version 10.5.8 desktop - 2.66 GHz Intel Core 2 Duo processor.

    All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
    Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
    I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

  • My ipad accidentaly fell with the earpods that i bought separately and unfortunately the right speaker is not working well, sometimes it works, sometimes not. is it covered with 1year warranty? or do i need to pay just to fix it?

    my ipad accidentaly fell with the earpods that i bought separately and unfortunately the right speaker is not working well, sometimes it works, sometimes not. is it covered with 1year warranty? or do i need to pay just to fix it?

    Accidental damage is not covered by any warranty.

  • My ipod 3g hung up in the middle of a song and when i restarted it, the downloaded apps are not working

    my ipod 3g hung up in the middle of a song and when i restarted it, the downloaded apps are not working

    - Try a reset. Nothing is lost:
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Purchase/install any new app
    - The remaining items in:
    iOS: Troubleshooting applications purchased from the App Store

  • Right-Clicks are not working when burned to disc.

    Hi,
    I need to use some right clicks in my course.
    They work when I publish the file to my desktop or Server (unchecking 'Enable Accessiblity' and using 'Flash Global Settings'), however when I then burn the files to disc to give to a client, the right clicks do not work.
    The course is made in Captivate 5.5 and is published to Flash 9.
    Any ideas??
    Thanks

    Captiv8r wrote:
    Hi Hattie
    One way past this would be to install a light web server on the disc that would fool the Flash Player into believing it is being served. Check the thread linked below for more.
    Click here to view
    Cheers... Rick
    Hi Rick,
    I have treid to do this following the instructions but it still doesn't seem to work...I am worried I may have dowloaded the wrong server2go package as couldn't see one called micro?
    Thanks

  • Sd card reader & USB port (right side only) not working

    I recently purchased a Macbook Pro 15" retina display with OS Moutain Lion. The SD card reader and USB port on the right side of the computer do not work. I've restarted the computer numerous times, tried to reimage the computer with the Control+R during restart (didn't allow for update because Mountain Lion was loaded on the system), and downloaded with the latest updates but they still do not work. I am currently deployed to Afghanistan so Apple Support calling me back isn't going to work. Any help would be appreciated.

    Hello :
    TNX for your reply.
    Unfortunately, I do not own a 2 gig mem card to test with. What perplexes me is that when I watch device manager and open properties boxes for the USB dev, SMSC-2228 dev,  and the newly created disks, the Win XP drivers do indeed load, but watching it do so is sloooooooowwwwwww. Slow as in 3 - 5 minutes for the win drivers to load in place. Funny thing is, an xD mem card or Memory stick initialize, set up properly in a matter of at most 5 - 10 seconds or so. The only card type I have a problem with is THE MOST COMMON ONE, the SD card. Maybe a Micro/Mickey soft thing? Some info I found on the SMSC controller claims it supports the larger sd card sizes, so I think this is a Micro / Mickey soft thing. I guess I need to search for some better drivers somewhere.
    TNX for now

  • Left click behaves as right click and the alphabet keys are not working

    Left click behaves as right click and the alphabet keys are not working

    It could be due to a Windows Update.
    I am also facing this issue. All my friends using Windows on Mac are also have got these ssues.
    Don't worry, you are not the only one facing it.
    T_T

Maybe you are looking for

  • How to ouput a fine WITHOUT the spot color in it.

    I made a file with a spot uv.  My graphics came from photoshop and i made my spot uv as a channel.  Now I am in In design I have my layout and my finished brochure.  I have the copy to send to the printer.  Now i need a copy to send online to the web

  • Cisco AIR-SAP2602I

    I'm trying to deploy a WiFi solution for a client. It would consist of 2 SSIDs; one for internal users with internal network access and a guest with only internal access. I have a Sonicwall TZ215: External IP: x.x.x.x LAN IP: 192.168.1.1/24 DHCP Serv

  • Kindle

    Just bought a Kindle and it can't find my home network router - WRT54G. I got a replacement Kindle and that can't find the network either. I add the network to the Kindle list of networks it can find and type in my password. If I do this about 10 tim

  • How to Join .RAR files in OS X

    My friend burned something for me that's in 2 parts. Each part is a .rar file. How under OS X can these files be joined? The reason he split it into two parts is because it wouldn't fit onto one DVD. Help is much appreciated. Thanks!

  • Help with Calling Party Transformation Patterns

    Hello,I am struggling to figure out how to apply Calling Party Transformation Patterns on CUCM for MGCP gateways. Basically, we use MGCP gateway everywhere so I need to apply CPTP on CUCM. However, I know how to do this using a gateway (CME) as an ex