The use of a tablet for perfect outlines

1. I need to create coloring pages that contain the same thickness lines throughout the entire image and was hoping to do this in Photoshop. Someone suggested the use of a graphic tablet for this. From my research there is no mention of enabling the same thickness line but rather it appears to be very sensitive to pressure applied and that the lines tend to thicken and thicken according to hand pressure. Can you clarify if my task can indeed be accomplished with the use of a graphic tablet?
2. If so, what will need to be set up for this to happen?
3. Also, I will need to trace a hand-drawn image via the use of the tablet as well. There was mention of some tablets containing a lift up transparent surface for enabling slipping a paper beneath. Is this a usefull and necessary feature for my application?

Yes - you can definitely use a pen tablet and have a constant thickness. You'll be able to adjust your brush settings using the Brush panel once your tablet is all set up. (If you can't see it, go to Window > Brush).
You can switch off pen sensitivity by change the Size Jitter Control dropdown to "Off".
A valuable button for you is the button I've highlighted in blue below. Clicking this button will disable using pen pressure with the brush size - when this is off, the size of your stroke will remain the size of the brush you have selected.
I personally create my linework by simply scanning in an image and "tracing" over it on a new layer in Photoshop. I usually drop down the transparency of the original image to make it easier to see my strokes. I have a very basic, cheap tablet and I find this method very easy.

Similar Messages

What is the use of Release Strategy for Sales Document

Hi,
Can i know what is the use of Release Strategy for Sales Document? Difference between lowest level and Highest level.

Hi,
Can i know what is the use of Release Strategy for Sales Document? Difference between lowest level and Highest level.
Lowest Status No: Sale Document can have several statuses at the same time. However, only one of the statuses may have a status number. If another status with a status number is activated; the old status with status number is deactivated. This is only valid under certain conditions. The system makes a note of the status with the highest status number that has been reached up to the present. The "lowest number" of this status number determines which status number a new status must have.
Highest Status No: Sales Document can have several statuses at the same time. However, only one of the statuses may have a status number. If another status with a status number is activated, the old status with a status number is deactivated, provided the new status number does not exceed the 'highest number' defined for the old status number
If you want more clarity try to check below link
http://www.sapfunctional.com/SD/ReleaseStrategy/Index.htm
Regards,
Prasanna

How can i cancel the using of "Only calls for emergency?"

How can I cancel the using of "only calls for emergency?"

In the USA, you cannot. I believe it is an FCC requirement that all cell phones be enabled to dial 911, even if they do not have an active contract or prepaid service assigned to them.

What is the use of 'is available for Everyone'

anyone please tell me what is the use of 'is available for queries' in the BMM layer.
Explain with example is appriciated.
Thank you.

Hi Viswa,
For the 'text' property of UI Element, you can provide a fixed value or bind it to context attribute of type String.
If you provide some fixed value for the text, you can set the width property accordingly.
The 'wrapping' property makes more sense when you have binded the 'text' property to some context attribute & you do not know the length of the text beforehand (text value may be coming from backend).
There you can provide value for 'width' property & set 'wrapping' = true, so that fixed text length is visible.
I think another use case scenario can be if you wish to resize the application window, you can adjust the space taken by the label using width & wrapping properties (resizing window does not have an impact)
Hope this clarifies your doubt.
Kind Regards,
Nitin
Edited by: Nitin Jain on Apr 15, 2009 12:14 PM

HT201304 oh, my God. Was anything ever so poorly explained as the use of one id for multiple devices? who, where can anyone help sort out the mess that has developed?

I have used my iphone 4s for over a year. Recently, I bought two ipod touch devices, one for each of my children. While attempting to set up their ipods, even with email advice from apple, we have become utterly confused as to whose apple id is on whose phone/ipod, why some apps automatically appear on two devices but not on the third (it varies). Most worryingly, in app purchases is DISABLED on my iphone but my children can still purchase in-app purchases without my knowledge and have run up bills (fortunately not huge bills). Why would anyone want to allow this???? If I have consciously disabled in app purchases under my apple id on my iphone, why would the default on another device be to allow in app purchases, when using my apple id?
When setting up my children's apple ids, I wanted them to have their own apple id to avoid this kind of confusion but we got warnings that they were not allowed to have an apple id (presumably too young?) . But they have got their own ipods and should be able to purchase items using itunes cards so why cant they have an independent apple id? And what's the difference between the apple id and the itunes id?
Is there anyone who can help clear up this mess?

You have to diasable in app purchases on the device itself, NOT the id.
If you want in app purchases disabled on the ipods, then you will have to do this on the ipods themselves.

What is the use of custom properties for terms in term store management of SharePoint 2013

Hi All,
Can some one pls explain what is the purpose of custom properties for terms in term store management tool of SharePoint 2013.
In general, for each term we have shared and local properties. What is the real purpose in terms of SharePoint development.
Please share with possible scenarios. Does it refer's to a hierarchical metadata in SharePoint ?
Thanks keshav,Share point Developer

The custom properties for terms allow you to further define or clarify a term via the properties. You can then display these properties in search results or specify query rules that look for specific custom properties.
Here is an example of how to create a query rule using custom properties:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/a8b53ffe-869e-4c86-8c43-d239370ee7d5/custom-properties-of-the-managed-metadata-service?forum=sharepointgeneral
Here is an example that uses code to verify that a custom property exists on a term object that is pinned to another term object:
http://msdn.microsoft.com/en-us/library/jj163273.aspx#SP15_H2UseCodeToPinTerms_CodeVerifyCustomProperty
Doug Hemminger http://www.sharepointdoug.com

The use only smart cards for several hundred users

How can I assign soon as possible,
use only the smart card for
a few hundred users? I also have
a group of people who would like to allow the use of
a login and password, and smart card.
Using GPO to the computer,
will be applied to the station, and I would just like
to the user. I know that
the card user can select
to use a smart card, but
how to do it automatically for a group of people
(several hunderd)?

I would use LDAP query via GUI tools (like AD Administrative Console) or console tools (Active Directory PowerShell module) get target users by using some filter and enable smart card checkboxes. GPO cannot be used to make changes in AD.
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.

Regarding the use of different services for different parts in the same display layout

hi,
i am trying to design an application using flex at the frontend and in the gui what i have designed i have the upper portion consisting of four panels
displaying the critical events at real time whereas in the lower half of the gui design i have designed something that based on the user provided input the
the information should be displayed in the lower half of the gui design layout.i just wanted to know whether it is possible to use two services like request response http based service for the lower half and real time data pushing using either amf or amfx or http with polling in the upper half.but i want them to be displayed on the same gui.
thanks

Hi,
Please refer the below link:-
http://www.sap-img.com/sap-sd/sap-sd-cin-configuration.htm
Thanks & Regards,
Rahul Verulkar

How to redefine the used size of memory for the OC4J of the JDeveloper

Hi!!!
I am developing a project that works with net (Route), when I I execute the application of the error because the bank that it loads demands more free memory of the OC4J, somebody knows as I I configure a bigger size of memory for the OC4J in the JDveloper?
thanks...

Try setting these parameters under project properties -> Run/Debug configuration -> Java options

What is the use of axis input for set rotation.vi

in the attached vi if i give axis as ( 1 , 0 , 0 ) and angle to some 10 object is rotating 10 degrees
if i keep axis as ( 20 , 0 , 0 ) also and if i am giving angle as 10 then also object is rotating 10 degrees only
so for the set rotation.vi what the input axis is exactly doing ?
thank you
Attachments:
set rotation.vi ‏8 KB
set rotation.vi ‏8 KB

A distribution set is needed when you want to configure distributed costing.

Whats the use of ios 8 for 8GB iphone 4 users?

This is patankars from mumbai
I beleive in steve jobs iphone 4
have not updated latest ios 7 its not feasible for 8 GB phones ( you can check the reviews)
In ios 8 had they kept in mind to make useble for ipnone 4 users

Well no. They can't keep in mind every singe version of the iPhone with every single iOS update - an iPhone 4 is quite old in technology terms now, so if you want something different, then you'll have to by a new iPhone that is more up-to-date, so this means you are looking at either an iPhone 5s or 5c or perhaps the new iPhone due to be announced in September we think.
In technology terms, you cannot update every single iPhone, due to storage capacity etc. Perhaps it is time to buy a new phone.

THE USE NAME OR PASSWORD FOR GMAIL IS COMING UP "

I have multiple mailboxes. I have a yahoo and a Gmail. When I click on my gmail account it comes up saying it does not recognize my user name or my password and yet it has my correct password and username. It is very frustrating. I have deleted the account and created it again to get the same messages on my iphone. Any ideas anyone?

Try the captcha unlock:
http://support.google.com/groups/bin/answer.py?hl=en&answer=2461835

Use of NOSCL(Counter for scheduling lines) in 02LIS_02_SCL

Hi,
I want to extract PO value from 02LIS_02_SCL in BW. The value which I get in PSA table is +ve and -ve. I am boserving the sum value for any PO is zero.
I wanted to know what is the use of NOSCL(Counter for scheduling lines) in 02LIS_02_SCL? I can observe that PO value corresponding to NOSCL =1 is +ve, i.e. I am getting all the +ve value in order for which NOSCL = 1. The positive PO value is as per R3 data.
Thanks in advance

Dear SDBI,
Thanks for reply.
I checked for rejection indicator. Again for every positive value there is negative value and for every negative value, its marked with rejection status. So when value for any particular value is summed up, we get result value as zero.
I need following information:
1. Is it possible for every every positive PO value, there is negative value?
2. How to reconcile the data in PSA of 2LIS_02_SCL with R3 tables?
Thanks again.
Jaydeep.

Interpretation of the use of threads with Sessions in the JMS Specification

Hello,
I’ve been interacting with two JMS Providers which do a different interpretation of the JMS Specification with the use of different threads for accessing to a session and session’s related objects.
The question is:
When a client is consuming messages asynchronously, is it possible to access session’s related objects from a thread different to the one dedicated to the asynchronous consumption, on (thread of control)?
- Never?
- Yes, but the client should provide explicit synchronization.?
Our execution scenario is:
1.- Messages are consumed asynchronously from a dedicated thread.
2.- From other thread, messages consumed are acknowledged.
In the JMS specification there is, at least, two parts where this issue is treated:
1.- The first one (4.4.1 - page 60):
+“There are no restrictions on the number of threads that can use a Session object or those it creates. The restriction is that the resources of a Session should not be used concurrently by multiple threads. It is up to the user to insure that this concurrency restriction is met. The simplest way to do this is to use one thread. In the case of asynchronous delivery, use one thread for setup in stopped mode and then start asynchronous delivery. In more complex cases the user must provide explicit synchronization.”+
This extract, makes me think that it is possible the access from different threads, but If I do that, I should provide explicit synchronization.
2.- The second one (4.4.6 – page 62,63)
+"Once a connection has been started, any session with a registered message listener(s) is dedicated to the thread of control that delivers messages to it. It is erroneous for client code to use this session or any of its constituent objects from another thread of control. The only exception to this is the use of the session or connection close method"?+
This extract, could be interpreted as that the concurrent access is never allowed in the described situation.

I think the key words are in 4.4.6 (and also the javadoc for Session): "Once a connection has been started, any session with a registered message listener(s) is dedicated to the thread of control that delivers messages to it".
My interpretation of this is that you when you register a message listener and call connection.start(), the thread which delivers messages to the listener should be thought of as "using the resources of the session" (as mentioned in 4.4.1) continuously until the connection is stopped (or until the session or connection is closed). it doesn't matter whether the session is executing onMessage() or not.
Given this, both 4.4.1 and 4.4.6 say the same thing: that once you have registered and started a message listener, the only thing you can do to the session from another thread is to close it.
I agree the spec could be clearer. In particular the words "In more complex cases the user must provide explicit synchronization" in 4.4.6 should be clarified to state what this actually means rather than give a hint.
Please note that work has just started on updating the JMS specification, so now is a great time to report areas of the JMS spec which would benefit from clarification. If you'd like this to be considered for clarification, please report it in the official JSR 343 issue tracker at http://jms-spec.java.net
Nigel

Use Web API url for loading an external image in a report

Hi there,
I am trying to host an image in a report, which is coming out of a Web API. I am able access the image through a URL in a browser:
https://companytest.com/api/TestFormImage?id=10358&EntityId=6719&imgMetadataName=TestDiagram
Can anyone please help me how to include this in a report ? I have tried to include this as an external image with the URL embedded as a string like:
=string.Format("https://companytest.com/api/TestFormImage?id=10358&EntityId=6719&imgMetadataName=TestDiagram")
NOTE: the output of the Web API is an image of MIME type PNG.
Thanks in advance!
Regards, Laks

To add an external image
In report design view, on the Insert tab, click Image.
On the design surface, click and then drag a box to the desired size of the image.
On the General tab of the Image Properties dialog box, type a name in the
Name text box or accept the default.
(Optional) In the Tooltip text box, type text to display when the user hovers over the image in a report rendered for HTML.
In Select the image source, select External.
For an image on a report server in native mode, type a relative path to the image in the
Use this image box—for example, ../images/image1.jpg.
For an image on a report server in SharePoint integrated mode, or any other Web site, type a full URL to the image in the
Use this image box—for example, http://<SharePointservername>/<site>/Documents/images/image1.jpg.
For more information, see Specifying Paths to External Items (Report Builder and SSRS).
(Optional) Click Size, Visibility, Action, or
Border to set additional properties for the image report item.
Click OK.
Andy Tauber
Data Architect
The Vancouver Clinic
Website | LinkedIn
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

The use of a tablet for perfect outlines

Similar Messages

Maybe you are looking for