The user approver name doen't show for BID approved

Hi experts.
Anybody knows can I solve my problem?
After I acepted a BID the Approver name appear in the preview, however, after the user approve the BID his name doen't show.
How can I check it?
Is there a report that shows who approved a bid?
Thanks.
Paulo Afonso Cordeiro

Hi Dinesh,
About this data in BBP_PD.
Node ID Agent User State Workitem Created at Finished at Description
At first time, before approval gets the name who will approve.
In the second moment, after BID approver this his name disaeared.
I thought the issue was my BADI implementation, but even with standard doen't work corretally.
Thanks.

Similar Messages

Some of the users Profile photo is not showing in sharepoint team sites

Some of the users Profile photo is not showing in the list of SharePoint team site.
In the people picker their picture is grayed out but if you click on their name it will direct you to their mysite and the picture is there.
Can some body help on this.

Try running:
stsadm -o sync -deleteolddatabases 0
Then, run the timer job named similar to "User Profile Service Application - User Profile to SharePoint Full Synchronization". Wait for it to complete, then re-check the profile photo on the SharePoint site.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Some users continue to get overdue notices for an approval workflow.

Some users continue to get overdue notices for an approval workflow that has already completed and approved. How to stop the overdue notices. And there are no tasks running in the task list.
Thanks
Ramanjjilu Naidu

Rama,
Usually these happen from restored/QA env which give us false impression.
Check similar thread -
SharePoint
Approval workflow Overdue emails after workflow completion
Overdue
task reminder even after task /library deleted
Task
overdue emails even after deleting all tasks
Workflow
Task overdue notifications
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

The page cannot be displayed Error showing for workspace

Hi All
The page cannot be displayed Error showing for workspace.
http://localhost:19000/workspace/index.jsp
Other web applications working fine.... Shared Services, FDM webclient
1. I have restarted Hyperion Workspace - Agent Service and IIS Admin service Still my problem didn't get resolved.
2.Below web services extensions provided *"Allow"* permission in Internet information services(IIS)Manager
Active Server Pages
ASP.NET v1.1.4322
ASP.NET v2.0.50727
Internet Data Connector
Server Side Includes
WebDAV
Application Pool->DefaultApp Status showing Running
Web sites->*1.Default web site 2.Administration* Status showing Running
Regards
Smilee

Correct, I just mistyped it in my thread. I just tried "http://epm.southbay.local:19000/workspace/"
When I click Start Reporting and Analysis core serivces a command prompt window opens with the name "server" on the window, but the command prompt window itself is empty.

Send notifications to the users whenever a template is ready or an approval

Is it possible to send notifications to the users whenever a template is ready or an approval is recorded when we use the work status. Is there any SAP "How to" documentation available on this ? What are the limitations of this process ?

Hi Sumit
Yes it is possible.
In BPC Microsoft Version we can design Business Process Flow (BPF) with the required Start date and time.
Through BPF (using step 1) we can also send E-mail Notifications for Start and closure of the Planning cycle.
To make this E-mail notification thing work:
1. Assign E-mail ids to the Owner/ Reviewer property in dimension with Hierarchy structure.
2. Assign Server info in the Application Set Parameter section from BPC Admin domain.
Using WorkStatus
This initiates emails to both the planner and the approver for any change in data for a work state change.
This is available in link: http://help.sap.com/saphelp_bpc70sp02/helpdata/en/a1/532226947C49A5B2E2BD32450CB2D1/frameset.htm
Hope this answers your question.
Regards
Abhishek

I am trying to back up my mail (5.1) directories but I can no longer locate them. They used to be in the user library. Would be grateful for some assistance.

I am trying to back up my mail (5.1) directories but I can no longer locate them. They used to be in the user library. Would be grateful for some assistance.

They're stil there; Apple decided to hide your Library folder. Hold the Alt/Option key while selecting Go in a Finder menubar and select Library.
Do you have other backups, made with a proper backup app? If not, that's the best way to back up your data, rather than doing it "piecemeal" via drag & drop.
You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.

How Get the users machine name

I need to develop the intranet ticketing system on SharePoint. When user create the ticket I need to fetch their machine name as well. I have search that lot of solution given for ASP. Net with c#. But I have use JavaScript for the application. if any
possibility to achieve this on JavaScript if it's not possible means what is the possible way to fetch user machine name in sharepoint
Ravin Singh D

Hi,
the below link I got answer. Thanks sagar
http://forums.codeguru.com/showthread.php?495819-Getting-windows-machine-name-via-the-browser
<BODY>
<Script Type = "text/JavaScript">
try
var ax = new ActiveXObject("WScript.Network");
document.write('User: ' + ax.UserName + '<br />');
document.write('Computer: ' + ax.ComputerName + '<br />');
catch (e)
document.write('Permission to access computer name is denied' + '<br />');
</Script>
</Body>
Above code do that. But we need change browser security level to low. And it showing one warning also. I have tested with IE. other browser I need to test.
Ravin Singh D

Outlook 2010 client - One of the user's sent items email shows as from address as invalid address

Hi,
One of the user in exchange 2010 - outlook 2010 environment, in sent items email from address shows as invalid address after sent emails to recipients. Recipients are successfully received the emails. however, why the invalid address appearing in sent items
from address for the one of outgoing email?
EMail showing From: /O=FIRST ORGANIZATION/OU=EXCHANGE ADMINISTRATIVE GROUP (FYDIBOHF23SPDLT)/CN=RECIPIENTS/CN=users name On Behalf Of
username
thnaks
MD

Hi,
As what ManU Philip says, please check the issue in OWA firstly and try setting changes in Outlook.
Additionally, I noticed that there is an On Behalf Of in your post. If the issue is also the same on OWA, We can use the following command to check whether the user have Send on Behalf
permission on “/O=FIRST ORGANIZATION/OU…”:
Send On Behalf:
Get-Mailbox -Resultsize Unlimited | ?{$_.GrantSendOnBehalfTo} | select Name,GrantSendOnBehalfTo
Please try to remove these rights and restart Outlook to check the issue existing.
If all of the above fails, Please collect the error logs in Event Viewer and post here. I would like to help you any time.
Hope it helps.
Thanks,
Winnie Liang

Unable to log in to the user account (name) at this time

I get this error message when I try to log-in in my main admin account. And this is not a lost password issue I know im typing the write password because when I type a wrong one the box shakes when I type the right one it gives me that message.
I tried alot of stuff to gain access to it but I cannot, the only thing that I can do is go in as root user and extract the files that I had in there, but I have no physcial access to the login it self, I started making a different account name for it but I dont want to lose all my prefrenses although I think the only thing that is making it this way is File Vault (its swtiched on for the locked out account)
Any thoughts?

I'm also getting the dreaded "You are unable to log in to the user account __ at this time" but believe this happened when I inadvertently tuned off an external hard drive without ejecting it first. At first, I thought it was a File Vault problem, but my user.sparseimage file is still there and accessible once I changed the permissions to those of another user account.
What I have come to believe, based on other postings I have read on this topic, at least in my case, is that I must have corrupted the logged in user on the netinfo file. The solutions I've seen so far for fixing the netinfo file seem pretty complicated, though I do have a backup of that file.
I have yet to decide whether the netinfo problem is easily fixable or if I would better employ my time moving my iTunes and iPhoto files off that sparse image and into another user account. I'm open to suggestions.
Bill
iBook G-4 Mac OS X (10.4.7) 1.33 GHz, 768 MB memory, 60 GB HD, iPod Shuffle

No Contact Names or Pics Showing for Incoming Calls?

I just got my phone yesterday. I have clean sync with my MacBook Pro. I thought that contact names should show for all incoming calls if that person and number are in my contacts. I also thought a photo would show if there was a photo in the contact as well.
???

I had a problem somewhat similar when I first bought my IPhone as well. My iPhone would show the numbers in international format with the 011 in front of all the numbers which made the contacts not show up when calls were incoming. I had to contact AT&T and spent 4 hours on the phone until someone actually figured out what was wrong and fixed it in less than 3 mins. It wasn't even the iPhone it had to do with the phone I previously had through Cingular/AT&T. The person said it was some sort of provisioning or something like that with some incorrect settings that screwed with the incoming calls only. This problem also would make the contact picture not show up as well for anyone in your list. This might help or maybe it won't. Good Luck figuring it all out. I still love my iPhone and haven't had too many problems with it

How do I change the User/library name on snow leopard?

My dad gave me his macbook and it's got his name on the user on the side panel and I want my name there instead. I know how to change the login name etc. but I can't figure out how to get past step 9 of http://support.apple.com/kb/ht1528 (enabling root user) I can't choose enable root user from the edit menu as it doesn't show.
I'm new to macbooks so it would be great if someone could explain it so that I'd understand
Thank you.

I've solved it not too worry.
http://www.youtube.com/watch?v=HLQps50A0qU
This video shows in detail what you have to do. Absolutely Brilliant.

SRM Approver Name - Data source need for this DSO: 0BBP_SCA

Hello Experts,
I am having difficulty to get shopping cart approver name loaded (but approver id is loaded) into BI reports
I am using standard business content (DS Names: 0BBP_TD_SC_1, 0BBP_TD_SC_APPR_1)
Please let me know the data source reg. this. Any hint reg. this will be appreciated.
I tried all these info objects, No luck yet.
0BBP_APPROV
0BPARTNER
http://help.sap.com/saphelp_sm32/helpdata/en/29/9cfb3673421a4a809ec9fe82d6a16b/content.htm
Thanks in advance.
Thanks
Praba

Hello Navesh,
You are right. Sorry I did not mention clearly in the title.
But I used correct DSOs respectively for the Data source
1)
Approval Process for Shopping Carts u2013 Single Documents Locate the document in its SAP Library structure
DSO: Technical name: 0BBP_SCA
DS: 0BBP_TD_SC_APPR_1
2)
Shopping Carts u2013 Single Documents Locate the document in its SAP Library structure
DSO: Technical name: 0BBP_SC
DS: Technical name: 0BBP_TD_SC_1
Please let me know relevant info object for Approver Name.
0BPARTNER
0BBP_APPROV
0HRPOSITION
Note: Source system is SRM
Thanks
Praba

Fixing the user logon name after a mistake in a script

Hello,
I ran a bulk import of user accounts into my AD, however when I ran the script there was an error in the UPN name. Now all the accounts have the following logon names:
{Domain.local}
Rather than
Domain.local
Making a user's UPN name:
User1@{domain.local}
Rather than deleting the accounts and re-running the script I would simply like to run a powershell command which will search for all the account withs {domain.local} in their UPN and change them to domain.local.
Can anyone assist?
Thanks.

Hello dbutch1976,
you can use Active Directory Module for Windows PowerShell.
Then, I have this question: is your SamAccountName equal to UPN prefix (e.g. SamAccountName:
toby.brown - UPN: [email protected])
If yes, the PowerShell script should be:
Get-ADUser -Filter {UserPrincipalName -like "*@{domain.local}"} | Select SamAccountName | ForEach { Set-ADUser -Identity $_.SamAccountName -UserPrincipalName "$($_.SamAccountName)@domain.local"}
...if not:
Get-ADUser -Filter {UserPrincipalName -like "*@{domain.local}"} | Select SamAccountName, UserPrincipalName | ForEach { Set-ADUser -Identity $_.SamAccountName -UserPrincipalName $($_.UserPrincipalName -replace "{domain.local}","domain.local")}
Bye,
Luca
Disclaimer: This posting is provided AS IS with no warranties or guarantees, and confers no rights. Whenever you see a helpful reply, click on [Vote As Help] and click on [Mark As Answer] if a post answers your question.

How to get the user input while server is waiting for client's message

I have a server/client program (using sockets)
I used a thread to let a server always waiting for client's request, but how should I found that
there is no message pass to server from client.
public void run(){
while (true){
Socket server = serverP.accept();
ObjectInputStream inFromClient = new ObjectInputStream(server.getInputStream());
inMessage = (Message)inFromClient.readObject();
System.out.println("Deadlock may occurred, please enter your command: ");
BufferedReader inFromUser = new BufferedReader(new InputStreamReader(System.in));
String command = inFromUser.readLine();
The server is waiting for the inMessage that is passed from multiple clients. But if the server
received no message after some time, it will assume something is wrong (eg, there is a
deadlock), then it will ask the user to input the command to execute the method.
If I put
"System.out.println("Do you want to take Snapshot: ");
BufferedReader inFromUser = new BufferedReader(new InputStreamReader(System.in));
String command = inFromUser.readLine();"
inside the while loop, it will keep asking user to enter the input when every time the client
connect to the server. But I want to ask the user to enter the command only when the server
can't get the response from clients.
How should I do?
Please help.

Your statement:
Socket server = serverP.accept();
it will block until Server receive connect request from client.
So, what u can do is, create a seperate Thread which check if server is idle (no client connect to it) for a certain time.
public class xxxxx extends Thread {
public void run(){
   (new WatcherThread()).start()
   while (true){
   Socket server = serverP.accept();
   WatcherThread.acceptFlag();
   ObjectInputStream inFromClient = new ObjectInputStream(server.getInputStream());
   inMessage = (Message)inFromClient.readObject();
   Do something with client request ...
   I suggest you to create a WorkerThread for
   each client request.
   For example:
   new (WorkerThread(inMessage)).start();
   This way, your server thread will immediately serve
   the next client request ASAP.
public class WatcherThread extends Thread {
   private static accept = false;
   public static void acceptFlag() {
        flag = true;
   public void run() {
       while(true) {
           try { sleep(10000); } catch (Exception ex) { }
           if (!accept) { // never accepted after 10000 msecs
              ... do your System.in here ...
           flag=false;
}The idea is, your server notify WatcherThread if a client connect. WathcerThread runs at seperate thread. It waits for 10000 msecs and check if Server ever gets connect request from server. If it doesn't then you can do your System.in, otherwise, it will wait for 10000 again..
FYI, next time, please use [ code ] and [ / code ] to format your code. It discourage me to read plain whole-left-aligned code like yours.
See: http://forum.java.sun.com/features.jsp#Formatting
rgds,
Alex

In my aperture the camera file name does not show under the photo how do I get it to show

In my aperature dislay the camera file number does not show how do I get it to show

Where exactly is the filename missing? Aperture has plenty of places to display metadata.
You configure and enable the display of metadata by defining Metadata presets. One place todo this is the little baggage label icon below the browser:
Press the icon,enable the display of metadata overlays for Browser and Viewer, then press "Edit" to customize the display of the tags you want to be displayed.
-- Léonie

The user approver name doen't show for BID approved

Similar Messages

Maybe you are looking for