The User Guide, sample books or menu of the Reader Wi-Fi is in a different language.

Solved!
Go to Solution.

The language of the User Guide, sample books and menu are set during the inital setup process of your Reader Wi-Fi. If the language is changed to a different language after the initial setup, only the menu would change to the new language. To change all of these to a different language, you will need to run the initial setup process again. Follow these steps to do a Factory Initialize (Hard reset) and set the appropriate language:
With the Reader Wi-Fi on, on the bottom of the device, press and hold the power button until the Device Shutdown screen appears.
In the Device Shutdown screen, press Yes.
Press the power button again to turn the Reader Wi-Fi back on.
While the screen displays opening book....., simultaneously press and hold down the Next and Back buttons.
Allow the Homescreen to fully load (Loading... should no longer flash in the top left corner of your screen) and then
do the following button sequence while still holding down the Next and Back buttons:
Release - Press - Release the Back button only and then Release the Next button.
In the Would you like to execute Factory Initialize screen, press Yes.
Press the power button again to turn on the Reader Wi-Fi. The Reader Wi-Fi will be set to factory settings.
Turn the Reader Wi-Fi back on. The initial setup process will begin.
NOTE: This procedure assumes you want English as the language. These steps can be done for any language.
In the Menu Language screen, select English.
Your reader will now be set for English. Follow the rest of the on screen steps to complete the setup.

Similar Messages

  • HT5140 I did put another language in input source, and keyboard shortcut, but when I close this window, after opening the mail window, where do I see different language to click on?

    I did put another language in input source, and keyboard shortcut, but when I close this window, after opening the mail window, where do I see different language to click on?

    You switch keyboards by going to the " flag" menu at the top right of the screen.

  • I have "@mail.ru" tool bar(i think) under the address bar. Its in a different language. I am not able to remove that. Please help me to remove that

    I have "@mail.ru" tool bar(i think) under the address bar. Its in a different language. I am not able to remove that. Please help me to remove that. Its not listed under 'Extensions', plug-ins,add-on too..
    Thanks

    Please look at another post I have just made relating to mail.ru, and post back with how you get on.
    * [/questions/924267#answer-323108] <-- clickable link -- (blue) --

  • Shake user guide or book

    I'm in the market for a guide or book to help me learn Shake and was wondering what is a good book to buy. I've looked at the "Apple Pro Training Series: Shake 4" by Marco Paolini and was just wonder if there are any other ones out there that might be better. Thanks for the help.
    citesix
    Quad 2.5 G5   Mac OS X (10.4.10)   GeForce 6600, 4.5 gig ram

    I have Marco's text and I think it's quite good.
    There's also The Gnomen Workshop's selection of rather in-depth Shake training dvds http://www.thegnomonworkshop.com/dvds/groups/shake_g.html

  • I have just updated my Ipod to version 6 but my ipod now states ios6 on the front of it and has all different languages on the slide button. what has happened and how do i put it right?

    I have just updated ny ipod tough to version 6 and now it states ios6 on the front screen and where it says slide to input security no it is in all different languages.  What do i need to do to sort?

    Fire97 is corret. It appear that you have to resetup/activate the iPod. Just slide to unlock and following the on-screen prompts.

  • When I look at the preview outlines, its all in a different language

    When I look at the preview outlines, all the words are in a different language. Could someone tell me how I can change it to English? Thanks.

    Frequent question, frequent answer.

  • How do you prevent the itunes trailers from playing in a different language when traveling abroad?

    I am traveling in the Dominican Republic and I was looking to download a move, but I wanted to watch the trailer first.  The trailer played well but in Spanish and I don't speak or understand Spanish.  How do I change the setting so all trailers play in English?  Does the same apply to what I download?

    You can only purchase items in the iTunes store country you are physically located in and have a credit card and billing address in that country.
    How do I change the setting so all trailers play in English?  Does the same apply to what I download?
    You cannot change it.
    Yes, it applies to previews as well as downloaded content.

  • Is there a Users' Guide to iToons 11?

    I am thrown by iToons 11's complexity.  Is there a users' guide of book that goes through each of its features?

    You can make it more similar to iTunes 10 by enabling the sidebar.
    iTunes 11: Show Sidebar and Status Bar

  • How to change the menu item's title in different language master page?

    I have a menu item in my English master page. I can change the titles of the menu items as I like in English related pages, However when I change the titles in the same pages that is related to different language page master, the changes does not take affect. Please  help. 

    you can use different CSS classes given in http://www.oracle.com/technology/tech/blaf/specs/textStandards.html
    --Prasanna                                                                                                                                                                                                                                                       

  • I set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same ID). how do i consolidate the two users on my new mac book?

    i set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same apple ID). how do i consolidate the two users on my new mac book?

    Well if you use the Finder Go menu to Computer, a window opens up double click on your boot drive and then on Users folder, open the other user folder and open Public and drop your files into DropBox
    When you do this it will copy them and change the permissions and user assigned to it, so log into the other user and place them into your respective normal folders.
    Once you have all your files over and don't need the old user, use System Preferences > Accounts to delete it if you wish, however it's good two Admin accounts on the machine in case something bad happens in the other. Some people for security reasons on use a Standard account for most uses and a emergency Admin account.
    One can still do most Admin things in Standard user.

  • Where can I find a user-guide for the awfull Text-Editor used to enter/edit these forums entries?

    I am desesperate to understand how quite basic functions (just as one of many examples: how can I paste text, that I have formatted in MS Word and want to paste into a Forum Post-Entry?) can be done with the primitive and awful Text Editor used to enter/edit Forum Entries. Notice, that like many other Adobe users, I am not familiar at all with HTML and it is therefore a description of the badly named "Full Editor" that I am looking for.
    Where can I find a User-Guide for this Text Editor?
    My recommendation to Adobe: exercise enough  brute pressure on the developers of this primitive Text Editor to force them to provide something more reasonable, more powerful and more intuitive.

    Thank You Jochem
    I was trying to understand how I could do things as simple as inserting text that I had previously copied. Since there are neither command menüs nor buttons for the Insert of previously copied text, I was trying a mouse right click.....and was being offered in the context menu the choice between "Insert Link", "Insert Image", "Alignement", and "Insert Table"....... but no possibility of a plain insert of previously copied text.
    Now, I realize, that Clearstream supports at least the keyword shortcut of "Ctrl V" ........that I am not using in any other software (I never use any keyboard shortcuts).
    Since Clearstream does not support reasonable choices in the contextual menus, I will need to memorize the most important keyword shortcuts.
    By the way: I detected now, that the "Ctrl V" keyboard shortcut allows me to insert formatted text.
    Even, if I will now begin to be able to use reasonably Clearstream, I am quite surprised to see that such a software provides neither reasonable Contextual Menus, nor a User Guide, nor........
    Thank you again Jochem for your patience with me.

  • Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file...Now I've got a new iPad and need the User Guide which is only available inPDF

    Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file using Safari...Now I've got a new iPad and need the User Guide which is only available in PDF and FireFox will not work.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Can I get a copy of the iPod Touch 4th Gen user guide on my iPod?

    Hi, I just got my first iPod a few days ago (64 GB model) and I wanted to know if there was a way to view the user guide on my iPod without having a wifi connection.
    Not every place I bring it will have wifi access, and I'd like to be able to have the guide readily available to read.
    Thanx in advance for any help.

    Hello Nyxx9,
    And welcome to Apple Discussions!
    One work around is to download a copy of the *User Guide* from Apple website. Then import it into iTunes (it will go into the Books category) and sync it over to your iPod via the iBooks application.
    B-rock

  • Where can I find the User Guide ios7 for ipad in german

    Where can I find the User Guide ios7 for ipad in german

    https://itunes.apple.com/de/book/ipad-user-guide-for-ios-7/id709634245

  • Can I access a user guide for 5.1.1 while using my iPad?? I will not have the internet for 10 days so would like to download something.

    Can I access a user guide for 5.1.1 while using my iPad?? I will not have the internet for 10 days so would like to download something before I leave!

    Download the fee iBooks app from the app store if you don't already have it.  Then download the .pdf here: iPad User Guide (For iOS 5.1 Software).  Next, import it to your iTunes library (iTunes>File>Add to Library).  Then sync it to your iPad by selecting it on the Books tab of your iTunes sync settings and syncing your iPad.  It will availble in iBooks in the PDFs section (tap Collections on the top left, then tap PDF's).

Maybe you are looking for

  • Not able to generate Report

    hi, In matrix report as the Number of column field and row field are not certain how do I get to know or point to each column field value for particular row. Other details:- In simple matrix report with column field as 'Division No' and Row field as

  • How to invoke XML Publisher report in 11i

    Can anybody please guide me on How can we invoke xml publisher report in 11i and how can we call XML publisher report from form or OA framework. Thanks

  • Setting up the XSI interface

    Hi All, We have a requirement to use FedEx/UPS for its shipments. Do we have any way to support that? We found that XSI would be helpful in serving this purpose in standard SAP. If anybody already worked on this requirement pls. provide us the inform

  • Cannot surf internet with WRT54G v5 on Windows Vista RTM x64

    Hi, I have a Linksys WRT54G v5 router with Firmware Version: v1.01.1, Nov. 10, 2006. On Windows Vista x64 I Network conections says that I have Internet access, as a matter of fact Windows Update works fine and downloads some update without any probl

  • How to Sum the intervals

    Sir, I would like to use the SUM function in summing the intervals like this statement: SELECT DATE_VALUE, DAY_NAME , SUM(CAST(TIME_OUT as time) - CAST(TIME_IN as time)), EMPLOYEE_ID FROM [table name] WHERE [where clause] GROUP BY DATE_VALUE, DAY_NAM