The user ID, password cannot be authenticated. Make sure you entered valid

Hi experts,
i've installed BPC NW 7.5, now i receive the error in subject when i try to logon from server manager, client, web...
Following sap note 1380518 i checked COM+ credential, but never changed.
The system was installed with CMS authentication, i created the user BPC_SYSADMIN on the DC with admin right on local server, the same user has admin rights on CMS also. I tried changing user definition (with domain and without) on server manager, on COM+ application identity tab, and in table UJA_SVR_DEFAULT on the Abap server, nothing happened.
Any help is appreciated.
Regards,
Simone Caponecchi

Hi,
Thanx for the feedback !! really appreciate it. Here is the response:
The COM components are ok, as well as the MSMQ and every other component you mentioned (also reinstalled it). I reactivated all "dictionary" to the 3 users created in ABAP, changed role to communication, and give SAP_ALL permission.
In the machine, changed the Default web site to port 81 (to let BPC website take port 80)
Reinstalled NET 2.0, set all components for BPC website to Net 2.0
Created the 3 abap users in domain and gave in both systems the same password.
Entered in the machine as the administrator user (also administrator in Netweaver) and started the installation without trouble.
After that, tried to run the server diagnostic but this user was lacking permits, so I added the 3 users (abap) in the local machine as administrators, in a new group called BPC (only giving the administrator role). Entered now in the machine as BPC_SYSADMIN and ran the Server Diagnostic without trouble.
After doing this, I now am facing an issue trying to add users to the 1° appset... choosing the domain users... however someone mentioned that this is related to the NET tier, is it better to reinstall this tier completely or at least try with NET 1.1, but im just about to find out.
Thanx again for the response.
Velázquez

Similar Messages

ICal pop-up when I open: The server did not recognize your user name or password for account. Make sure you enter them correctly.

The server did not recognize your user name or password for account. Make sure you enter them correctly.
I am getting this pop-up whenever I open iCal. Recently changed Google password. What has gone wrong?
<Email Edited By Host>

You really should not post your email address to a public forum such as this where it can be harvested by spammers. I requested the Hosts edit it for your protection.

Please help I am suddenly getting the following on my calendar The server did not recognize your user name or password for account "..." Make sure you enter them correctly. I depend on it for work

Please help I am suddenly getting the following from my calendar The server did not recognize your user name or password for account “...” Make sure you enter them correctly.I have even tried changing the password and no luck. I depend on it syncing with mobile me and my phone and I need it for work.

I have been having the same issue but I think I fixed my problem. In iCal, click iCal, Preferences, Accounts and retype your password. That seems to have done the trick for me as far as I can tell.

I bought a new McBook Pro and when I backed up from my old computer, the iCal on my new computer is not syncing. It says "The server did not recognize your user name or password for (name of my mobile me acct). Make sure you enter them correctly."

I bought a new McBook Pro and when I backed up from my old computer, the iCal on my new computer is not syncing. It says "The server did not recognize your user name or password for (name of my mobile me acct). Make sure you enter them correctly." Any suggestions?

Carla,
Check this post for a possible solution.

"Help" menu always says "The current topic is currently unavailable. Make sure you are connected to the internet. I am connected to the internet.

"Help" menu always says: "The current topic is currently unavailable." " Make sure you are
connected to the internet." I am connected to the internet.

Please restart your machine and try again.
Thanks

"Cannot login. Make sure the name and password are correct."

I've just created a new iAS6 SP4 instance on a new machine (new local LDAP, SPARC Solaris8). But when I startup a ksvradmin tool I get the msg: "Cannot login. Make sure the name and password are correct."... and I cannot access to admin my new instance :-(. I don't understand about what user and what pw it tell me. I did this instalaltion on other machine by the same way but without any problem. On my other machine I don't have to identificate me when I use the ksvradmin tool.

Sorry I wasn't being very clear either. I was assuming that you were trying to follow option 2 from Joe D's post on 3-24-2004. Once you know what environment variables have changed you can go the control panel to set them. Some of them will may be new variables that you will need to define. Others may already exists in which case you want to append to them.
The other option is as Joe D said, which is to run VCVARS32.bat before you start Xmath. You could even make a batch file such that instead of starting xmath.bat directly you call your own batch file (.bat). This batch file would have two lines. One to run VCVARS32.bat and the second to run XMATH.bat. If you are not familiar with batch files there are a lot of resources on the web about them. In this case all you would need is:
<path to vcvars32.bat>\vcvars32.bat
"C:\Program Files\National Instruments\MATRIXx\bin\xmath.bat" -v 71.6
The -v 71.6 is optional. it specifies to specifically open version 7.1.6. If you leave it off the newest version will be opened.
Carl L
National Instruments

TS3899 cannot get mail.....The user or password for AOL is incorrect

Cannot get mail....The user or password for AOL is incorrect

Hello MSPETE50,
Thank you for using Apple Support Communities.
I see you are having issues with getting mail from your AOL account. The following article should help you troubleshoot the issue and get it sorted out.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Regards,
Jeff D.

Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regards

You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards

UCM Administration Applets request the user and password confirmation

I want to ask if someone has experienced in the UCM Administration Applets, that request the user and password confirmation for each time the applets are executed,
Is there any configuration in the UCM that activates this behavior?
I’m trying to reproduce this behavior in the development environment but with not much success
The UCM version is 10.350
Thanks for your support.

Is there any configuration in the UCM that activates this behaviorNo. It's more likely that you are accessing the applets via a URL that does not match the one you originally used to log in to the Content Server.
For example, you logged into "http://myserver/cs" or "http://<ip address>/cs". However, your HttpServerAddress variable is defined in Content Server as "http://myserver.mydomain.com". (Any absolute links to the applets use the variable to build the URL.) The browser "thinks" this is a new domain, and doesn't forward credentials to the different address. So the applet must prompt again for credentials. (Are you using a load balancer by chance? Does your HttpServerAddress variable in Content Server match the DNS entry being used for the load balancer?)
I've also seen some versions of the Sun client JRE do this by design as a security "feature". If you using IE, make sure your server address is in the "trusted" or "intranet" security zone.

The user admin is not authorized to make the Create Order request

Hi,
I have deployed the PiP and trying to create the order. But i am getting the below error
The user admin is not authorized to make the Create Order request>
Please note :--
I have assigned roles in administrator
I have assigned permissions in Weblogic.
Thanks

Hi,
Click on the user admin under user and groups , go to the tab Passwords. Give the password for the admin user and save it. Restart the server and try to login.
Regards
Marg

Can't activate ipad which we forget the user and password

can't activate ipad which we forget the user and password
what i need to activat it please

Strange that you all (we) cannot remember user and password.
Got any reason why?

Linking to an OBIEE report without showing the user and password

Hi!
we are trying to access to an obiee report from an external portal (coded with php).
The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
But this url is expossing OBIEE's user and password.
In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
but we couldn't use this aproach due to security issues.
Thanks!
Nuria

Hi!
We have finally done this (and it works!)
<?php
$urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
$ch = curl_init($urlInforme);
$ckfile = tempnam ("./", "CURLCOOKIE");
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$output = curl_exec ($ch);
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$fp = fopen("salida.pdf", "w");
curl_setopt($ch, CURLOPT_FILE, $fp);
$output = curl_exec ($ch);
curl_close($ch);
fclose($fp);

I keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get it when I either try to open it from the Start menu or from the desktop icon.

I've just installed Firefox on my laptop and keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get this message whenever I either try to open it from the Start menu or from the desktop icon. I've never gotten it to work and even uninstalled it and then redownloaded it and still cannot get it to open. Any help would be greatly appreciated!!!!

Are you installing from the official site? http://www.mozilla.com/firefox
If you use Windows Explorer (My Computer) to check that path, is the Mozilla Firefox folder there? That is the normal installation location, but I think it's worth checking.
If the folder isn't there or firefox.exe is not in it, I wonder whether some other software might be interfering. You might want to run some supplemental security scans. These two tools are highly regarded:
Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware : http://www.superantispyware.com/

Reset the user and password in the config tool

Dear All,
how can I reset the user and password in the config tool ?
Regards
ertas

how can I reset the user and password in the config tool ?
Section from help:
http://help.sap.com/saphelp_nw70/helpdata/en/1c/129d440bbe4b7d8ae8b82879808d7e/content.htm
Section from SDN Wiki:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/to%252breset%252badministrator%252bpassword%252bthrough%252bconfig%252btool
Regards,
Abhishek.

What is the user and password to Oracle 8.17

Dear expert,
I have loaded IDES 4.7 with Oracle 8.17.
I wish to query the SAP table using Oracle PL/SQL.
What is the user, password and string to login into SAP Oracle database? Since I was not asked for user and password when installing Oracle I do not know how to login.
Also can you let me know how to view/change table fields in SAP tables. I understand there are different ways but which in your opinion is the easiest to find the record I want to correct(as some tables have many fields).
Your kind assistance is appreciated.

Thank you for your reply. Both the user and password does not work on my IDES 4.7e system.
However I tried with user Internal and without password and I successfully login.
I then create a new user and also change the user=system
password.

The user ID, password cannot be authenticated. Make sure you entered valid

Similar Messages

Maybe you are looking for