The user profile service service failed to logon user profile cannot be loaded on Windows 7 Home Premium
Good Afternoon Everyone,
I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my issue
... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
Very Respectfully,
Jesse
"Jesse.soto1" wrote in message news:1e164fdf-7370-45c0-9bc7-3b58278121c3...
Good Afternoon Everyone,
I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my issue
... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
Very Respectfully,
Jesse
Home Premium cannot logon to a Domain, nor can it be set to try it.
when you get the logon window, try hitting the three-finger salute )Ctrl+Alt+Del) twice – it may bring up the old-style login window – enter your credentials there.
Noel Paton | Nil Carborundum Illegitemi |
CrashFixPC | The Three-toed Sloth
Similar Messages
-
Can I change the OS of Touchsmart 610 from Windows Home Premium to Windows 7 Pro?
I have 610 1100me system loaded with Windows Home Premium 64 bit. We bought it from Dubai and is in use in Pakistan. It started giving problems after few weeks of use. Its' hard disk makes noise and sometimes, system could not find boot disk. Most of the times blue screen of death and hanging issues. Any idea about this issue and how to fix it? My observation is that the culprit is hard disk!
Also, can I change its OS to Windows 7 Pro or ultimate (32 or 64 bit)? Where can I find all drivers for Pro or Ultimate?
Many thanks for your valueable advice.
Regards,
KK
This question was solved.
View Solution.Hi,
Nearly nothing change interms of drivers required for Windows 7 (HP, Pro, Ultimate) unless you switch from 64 to 32 bit. You can reuse your current HP 64 bit drivers for 64 bit W7 Pro or Ultimate.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 ULTIMATE then after the exctraction of files and everything the windows setup came and my mouse and keyboard stopped working and i dont know how to open mac os x there is no option anywhere?? what shall i do pls help!!!!if there are any keyboard shortcut key to open mac os x or boot camp pls mention.
For Boot Camp issues please repost in the Boot Camp forum located by clicking Boot Camp
-
NDES - SCEP - Certificate Profile 0X87D1FDE8 Remediation failed - Deployment of Certificate Profiles
Hy all,
i have a problem with certificate profiles deployment via SCCM 2012 R2.
My Testlab:
Server 2012 R2 - DC
Server 2012 R2 - CA
Server 2012 R2 - SCCM 2012 R2, Intune Subscription ...
Server 2012 R2 - NDES, SCCM Site System with Certificate Registration Point, Policy Module
NDES Service Account (SPN for NDES Server)
CA:
Administrative Rights for NDES Service Account
CEP Encryption (Read&Enroll for NDES Service)
Exchange Enrollment Agent (Offline request) (Read&Enroll for NDES Service Account)
Webserver Certificate for NDES, SCCM Server (Dublicatet Webserver Template)
Client Authentication Certificate for NDES, SCCM Server (Dublicatet Template for Client Authentication)
"Custom IPSec V2" Template, (Dublicatet Template of IPSec (offline request), Read&Enroll for NDES Service Account)
Policy Module on NDES Server
In the Wizard i selected the Client Authentication Certificate
NDES Server
Installed "Network Device Enrollment Service" Role Service
SCCM Site System, SCEP Role
Location: HKLM\SYSTEM\CurrentControlSet\Services\HTTP\Parameters
Value: MaxFieldLength
Type DWORD
Data: 65534 (decimal)
Location: HKLM\SYSTEM\CurrentControlSet\Services\HTTP\Parameters
Value: MaxRequestBytes
Type DWORD
Data: 65534 (decimal)
SSL settings to “Require” SSL , “Ignore” client certificates.
NDES Service Account member of IIS_IUSRS
IIS - Webserver Certificate for :443 Binding
HKLM\SOFTWARE\Microsoft\Cryptography\MSCEP
EncryptionTemplate, GeneralPurposeTemplate, SignatureTemplate
i set it to "CustomIPSecV2"
SCCM:
Installed Certificate Registration Point on NDES Server
Certificate Registration Point Properties - URL for the Network Device Enrollment Service ...
I set it to: https://externalfqdn/certsrv/mscep/mscep.dll
Certificate Root CA Profile
Certificate Profile for "CustomIPSecV2" Certificate
Now i have following error for the deployment of the "CustomIPSecV2" Certificate: 0X87D1FDE8 Remediation failed
I can not find any error in the logs (SCCM, crp.log, NDESPlugin.log, crpctrl.log)
In the IIS log there are following entries:
2014-08-02 18:57:41 fe80::10b7:f62:ec3c:605d%12 POST /CMCertificateRegistration/certificate/generatechallenge - 443 - fe80::10b7:f62:ec3c:605d%12 SMS_CERTIFICATE_REGISTRATION_POINT - 201 0 0 3502
2014-08-02 14:07:40 172.16.0.8 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 144.11.115.119 - - 200 0 0 68
What can i do?
Thanks in Advance ..Hello!
I still have the same problem - Remediation failed - 0X87D1FDE8
Is this only a problem of the certificate template?
I also reinstalled NDES Server and CRP Role on Primary Site
Has anyone an idea?
CRPSetup, crpctrl, CRPMSI all ok.
IISLog:
#Software: Microsoft Internet Information Services 8.5
#Version: 1.0
#Date: 2014-10-13 13:09:35
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
2014-10-13 13:09:35 172.16.0.6 GET /certsrv/mscep/mscep.dll - 80 - 172.16.0.5 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) - 200 0 0 1179
2014-10-13 13:09:37 172.16.0.6 GET /favicon.ico - 80 - 172.16.0.5 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) - 404 0 2 1384
2014-10-13 13:14:01 172.16.0.6 GET / - 80 - 172.16.0.4 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 1
2014-10-13 13:14:01 172.16.0.6 GET /iis-85.png - 80 - 172.16.0.4 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko
http://server.external.fqdn 200 0 0 6
2014-10-13 13:14:03 172.16.0.6 GET /favicon.ico - 80 - 172.16.0.4 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 404 0 2 1
#Software: Microsoft Internet Information Services 8.5
#Version: 1.0
#Date: 2014-10-13 13:15:24
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
2014-10-13 13:15:24 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 172.16.0.4 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 2
2014-10-13 13:15:24 172.16.0.6 GET /favicon.ico - 443 - 172.16.0.4 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 404 0 2 4
2014-10-13 13:15:40 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 47
2014-10-13 13:15:40 172.16.0.6 GET /favicon.ico - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 404 0 2 47
2014-10-13 13:20:08 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 49
2014-10-13 13:20:08 172.16.0.6 GET /favicon.ico - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 404 0 2 47
2014-10-13 13:25:32 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 48
2014-10-13 13:25:32 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 50
2014-10-13 13:25:33 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 49
2014-10-13 13:35:17 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 49
#Software: Microsoft Internet Information Services 8.5
#Version: 1.0
#Date: 2014-10-13 13:43:25
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
2014-10-13 13:43:25 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 150
2014-10-13 13:43:32 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 104.45.8.80 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 6
2014-10-13 13:43:42 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 172.16.0.4 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 1
2014-10-13 13:47:25 172.16.0.6 GET /certsrv/mscep operation=GetCACert&message=MyDeviceID 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 301 0 0 47
2014-10-13 13:47:25 172.16.0.6 GET /certsrv/mscep/ operation=GetCACert&message=MyDeviceID 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 50
#Software: Microsoft Internet Information Services 8.5
#Version: 1.0
#Date: 2014-10-13 13:52:22
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
2014-10-13 13:52:22 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 233
2014-10-13 13:52:22 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 46
2014-10-13 13:57:00 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 56
2014-10-13 13:57:00 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 41
2014-10-13 14:03:26 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 62
2014-10-13 14:03:26 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 46
#Software: Microsoft Internet Information Services 8.5
#Version: 1.0
#Date: 2014-10-13 14:19:25
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
2014-10-13 14:19:25 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 1278
2014-10-13 14:19:25 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 52
2014-10-13 14:19:31 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 104
2014-10-13 14:19:31 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 74
2014-10-13 14:21:07 172.16.0.6 GET /certsrv/mscep/ operation=GetCACert&message=MyDeviceID 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 62
#Software: Microsoft Internet Information Services 8.5
#Version: 1.0
#Date: 2014-10-13 14:26:01
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
2014-10-13 14:26:01 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 294
2014-10-13 14:26:01 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 46
2014-10-13 14:26:07 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 56
2014-10-13 14:26:07 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 52
#Software: Microsoft Internet Information Services 8.5
#Version: 1.0
#Date: 2014-10-13 14:46:41
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
2014-10-13 14:46:41 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 601
2014-10-13 14:46:41 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 47
2014-10-13 14:46:51 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 99
2014-10-13 14:46:51 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 78
2014-10-13 14:50:40 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 46
2014-10-13 14:50:40 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 66
2014-10-13 14:51:53 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 46
2014-10-13 14:51:53 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 62
Christoph R 13 -
Keep getting this message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, cannot view open window or close Firefox. Have to always reboot system to access the internet.
For possible causes of this error, and how to troubleshoot it see [[Firefox is already running but is not responding]].
-
My Touchsmart tx2z-1000 : "The user profile service failed to logon User profile cannot be loaded"
Hi!!
Has anybody had this problem? I want to get into safe mode, but the F8 key doesn't do anything. Is there any way to access system restore without logging on? Windows 7 64bit
Any ideas on how to solve this problem? Thanks!!Hi Julianne_27_Chambers,
Have you got other administrator accounts in this machine ?
According to your description,it seems that the present user account profile has corrupted .
We can create a new administrator account and then login with it .Then we can refer to the following link to fix the corrupted user profile .
Fix a corrupted user profile
http://windows.microsoft.com/en-hk/windows/fix-corrupted-user-profile#1TC=windows-7
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
How do I back up the contents of apps such as notes and office docs on my ipad to my PC ( windows op system) so I can use them on PC if my ipad fails?
You can use File Sharing in order to transfer the Word documents and the notes depending upon what apps you are using. Take a look at this.
iOS: About File Sharing - Support - Apple
There are file transfering apps like this one.
File Manager - Folder Plus on the App Store on iTunes
You can always email files as a last resort type of thing. That may not be practical depending upon the number of files that you have. -
I have my computer at home that has itunes on it. It is the one that I sync to my iphone. I have a computer at work that I would like to have the same itunes on it. How do I go about doing that?
iOS devices are designed to sync with a single computer and iTunes library. If you attempt to change iTunes libraries, iTunes will delete all iTunes media from your device prior to syncing with the new library.
If your goal is to get your iTunes music library on your work computer, you can copy your music to an external drive, then import it to your iTunes library at work. Another option would be to subscribe to iTunes Match, which would then allow you to sign into your iTunes Match library on your work computer and access your entire music library (up to 25,000 songs, not including songs purchased from the iTunes store) from iCloud. -
Please help me install the beats audio. Mine was lost after installing windows home premium. Thanks.
Product name: Pavilion dm1-4000au
Product number: QG411PA
This question was solved.
View Solution.Hi,
Download and install the IDT driver on the link below - this should also install the Beats Audio interface.
http://ftp.hp.com/pub/softpaq/sp54001-54500/sp54236.exe
After the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I get this message when i try to log onto my home pc account "The user Profile Service, service failed the lofon. User profile cannot be loaded" can I recover my data from another/new user account from my iCloud account??
"Jesse.soto1" wrote in message news:1e164fdf-7370-45c0-9bc7-3b58278121c3...
Good Afternoon Everyone,
I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my issue
... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
Very Respectfully,
Jesse
Home Premium cannot logon to a Domain, nor can it be set to try it.
when you get the logon window, try hitting the three-finger salute )Ctrl+Alt+Del) twice – it may bring up the old-style login window – enter your credentials there.
Noel Paton | Nil Carborundum Illegitemi |
CrashFixPC | The Three-toed Sloth -
First time poster, but I think I've done my homework on this issue.
This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
However, it is definitely not the same issue (see further).
Current Config:
HP dv7-1450.
W7 RC 7100 x64
Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
Running with Admin account while diagnosing/troubleshooting.
Currently have two working accounts, one standard, one admin.
Symptom:
New user accounts cannot be logged into. On an attempted login to the new account, the following information is displayed on the login screen: "The User Profile Service service failed the logon. User profile cannot be loaded." Windows then logs off the operator and returns to the initial user selection screen. All other aspects of use are normal.
Current Diagnostics:
First attempts to resolve this problem were to recreate the new account. This was attempted when logged in as both Standard and Admin. This was also attempted under safe mode. This has been attempted with virus protection disabled. All to no difference in the symptom.
The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link). Unlike that issue, there simply is no entry for the new user. Examination of the new log entries from creation of account to attempted log in provides the following entries:
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Naturally I started with the earliest error first, and decided to look to see what is going on. The file that is trying to be copied is there, but the destination folder does not exist. As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation. Specifically I suspect it may not be able to create the appropriate folders before performing the copy. Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs. Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile). The following two (unhelpful to me) log entries were generated.
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The message id for the desired message could not be found
Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated. I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
There's the info. I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log. I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
Thanks in advance to responders!First time poster, but I think I've done my homework on this issue.
This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
However, it is definitely not the same issue (see further).
Current Config:
HP dv7-1450.
W7 RC 7100 x64
Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
Running with Admin account while diagnosing/troubleshooting.
Currently have two working accounts, one standard, one admin.
Symptom:
New user accounts cannot be logged into. On an attempted login to the new account, the following information is displayed on the login screen: "The User Profile Service service failed the logon. User profile cannot be loaded." Windows then logs off the operator and returns to the initial user selection screen. All other aspects of use are normal.
Current Diagnostics:
First attempts to resolve this problem were to recreate the new account. This was attempted when logged in as both Standard and Admin. This was also attempted under safe mode. This has been attempted with virus protection disabled. All to no difference in the symptom.
The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link). Unlike that issue, there simply is no entry for the new user. Examination of the new log entries from creation of account to attempted log in provides the following entries:
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Naturally I started with the earliest error first, and decided to look to see what is going on. The file that is trying to be copied is there, but the destination folder does not exist. As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation. Specifically I suspect it may not be able to create the appropriate folders before performing the copy. Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs. Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile). The following two (unhelpful to me) log entries were generated.
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The message id for the desired message could not be found
Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated. I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
There's the info. I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log. I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
Thanks in advance to responders!
To resolve this issue, I suggst you delete the file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm.Arthur Xie - MSFT -
Failed to sync user with identity native://nvid=9236b494f1ddf8ca:-7297b89f:
Hi,
I have created a native user in hyperion share services 11.1..2.1 and provisioned him as a planner for one planning application.The issue is getting errors when i am giving access to dimension members in planning application.
Below are the errors:
1)failed adding users and groups
2)Failed to sync user with identity native://nvid=9236b494f1ddf8ca:-7297b89f:132610f37e3:-7e0f?USER with user provisioning. Check Planning log for details
Regards,
RaHi,
I have seen this though maybe not in the same context, I will describe what I saw..
Migrated planning database, updated sid for native users...
1 native was fine logging into the planning app, the other user got "Failed to sync with user provisioning. Check Planning log for details"
The sid was correct so it wasn't a problem on the planning side, what I did notice was in the EAS console the user did not exist, usually when you first log into planning it will check if the users exists in essbase, if they don't then it adds the user as a planning user to essbase.
What I did was add the user in HSS as having essbase server access, then refreshed security in EAS, the user now appeared in EAS as an essbase user.
Then tried to log into planning and suddenly the user could connect with no problems.
So then I removed the essbase server access for the user in HSS and refreshed security in EAS, the user was gone, tried to log into planning and logged in with no problems.. Migrated identities in Planning.... Back in EAS the user was now in there as a Planning user...
I don't know if this the same problem but you could try playing around with the essbase security and see what happens.
Cheers
John -
Flash Player service 11.6 r602 stopped working OS Vista Home Premium
I keep getting the notification the Flash player service 11.6 r602 stopped working. My operating system is Vista Home Premium. What do I need to do to crrect this?
You CAN'T call Adobe for support for a "free" product. There IS NONE. What you CAN do to eliminate this is:
Right click ANY flash content on the web and choose "Global Settings"
Under the Advanced tab Check "Never check for updates (not recommended)"
This will stop the updater from ever starting and it won't stop working if it never starts.
The downsiade is you'll have to manually check for updates afterward. -
Assignment of PB (person) to SAP Logon user.
Hi All,
How to assign BP Number (person) which is the actual user at customer side to SAP Logon user in SNC??
Is there any assignment exists.
Thanks
Best Regards
SanjayHi Sanjay,
SAP Logon user can be assigned to business partner from customer side just follow the below steps:
step1) go to transaction code BP and create business partner person say BP person is ABC and select BP role as internet user
There will be internet user tab will be visible.
Enter your SAP logon user in field Internet user and User name then save the BP person.
Step2)Assignment of BP person to the customer(BP organization of the customer)
go to transaction code:/n/SCA/usrprtassign
enter BP person in user field and customer BP organization in buisness partner field then execute.
Now your SAP logn user is assigned to customer.
Note:your SAP logon user should have web UI roles assigned to it.
see the below link for more information on standard SAP roles for SNC:
http://help.sap.com/saphelp_snc70/helpdata/EN/47/7e6ca41207500ce10000000a421937/frameset.htm
Regards,
Nikhil -
User SAP* is active. No other users can log on. Now What?
After the last time I restarted the portal, I get the following message when I try to logon:
User SAP* is active. No other users can log on
Before the reboot, I was trying to configure LDAP. I changed the Data source from "Database Only" to "Read-Only Microsoft ADS (Deep Hierarchy) + Database". I also, tried to create a Superuser/Password. You can logon using SAP* and see the users from LDAP.
Any thoughts? Also, can anyone clarify the configuration option:
SAP* User Configuration
Enable SAP* user (If you disable the SAP* user, enter a superuser ID and password below)
Superuser Name
Superuser Password
EP6.0Bill,
You have to assign a user the super admin role. Once the user has this role, go to the UM Configuration (System Admin--> System Config --> UM Configuration) and uncheck the Enable SAP* User option and enter in the superuser name and superuser password. Restart the portal and users should be able to login.
FYI. No users can login to the portal if sap* is active.
Regards,
Marty
Maybe you are looking for
-
Not displaying tax value in condition tab in PO
Dear MM experts, I have a problem in condition tab in PO, I have applied a tax code (input tax) in the invoice tab, the tax (or condition) value is calculating and showing in the tax details. But i am not getting the tax value in condition tab and th
-
Can I use "else if" in a trigger ?
My trigger works when I take out the "else if" part. Is there a way I can use something like the "else if" without getting compilation errors ? Either "nsn" or "load_date" is updated in the table ~ never both columns updated at the same time... creat
-
Problem installing java mail api1.4.1
i installed javamail api1.4.1 by unzipping and setting the classpath for activation(of JAF) and mail(of JavaMail API).. but when i compile a sample program(progname is msgsend) which already exists in the mainAPI directory, i get a message saying- ja
-
Very Confused! Help please???!!!???
I attempted to burn a playlist in iTunes to a disk and even though a blank cd was already in the drive, it spat the disk our again, and prompted me to insert a blank disc in the drive. i re-inserted the same disc, and iTunes said it was checking medi
-
I am getting this mandatory webOS system update. do I really need to update this?
I am getting e-mails stateing the I need to Mandatory webOS system update. I do not use HP and do not use cloud, do I need to update this?