The user's password must be changed before signing in

I have set up a new laptop with a new of users.
One of these attempted to access their account, and was asked to reset their password however this screen has got stuck. The password they enter is correct (we have tried it on a different machine) but we just get the screen 'The users password must be changed
before signing in'
Can't get back to the start screen, can't try and login as a different user, and when I force a restart then the screen just comes back, and when I've left the battery to run down also the same screen comes back.
When I can sometimes get the screen to go away then the screen is just blue (no markings of any kind, plain blue), and if I click or move mouse the login screen comes back.
Any advice gratefully received

Hi,
Regarding current situation, let’s try following steps to check the issue:
Step 1: Power the system off, remove the USB plugs for both the mouse and keyboard and move them to different USB ports. Power the machine back on and wait 2-3 minutes to make sure Windows has detected and set up the devices again.
If step 1 doesn’t work, please try step 2:
Step 2: Basically windows 8.1 stopped all the USB ports from working. Go into BIOS, for USB configuration:
Changed it to Intel XHCI mode: Disabled
Legacy USB Support : Enabled.
Hope these could be helpful.
Kate Li
TechNet Community Support

Similar Messages

The user's password must be changed before logging on the first time

Please, i have been battling with the message above and i have read similar postings all to no avail. I am trying to run Windows Server 2008 R2 in "Sun's Virtual box" and everything went well until i was prompted to enter a password. This is just my first
installation, and the virtual box is not password enabled. The host operating system is windows 7 ultimate 64bit which is password enabled but i have entered the password used for the host operating system and i will get this message "Unable to update the
password. The value provided for the new password does not meet the length, complexity of history requirement for the domain". The Windows Server was labelled "DC1" in the Sun Virtual box. I tried creating a password reset disk and i got the message "The password
you entered is incorrect for this user account. Please try again". At this point i don't know what else to do. Please, can anyone point me in the right direction.....please.
Thank you.

On July 1st we will be making Windows Server 2008 R2 General forum read only. After receiving a lot of feedback from the community, it was decided that
this forum is a duplication and therefore redundant of the General Forum. So, until July 1st, we will start asking customers to redirect their questions to the General Forum. On June 11th, CSS engineers will move any new threads to the General Forum.
Please post a reply to the announcement thread if you have any feedback on this decision or the process. You can also email [email protected]
Shaon Shan TechNet Subscriber Support in forum If you have any feedback on our support, please contact [email protected]

Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regards

You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards

UCM Administration Applets request the user and password confirmation

I want to ask if someone has experienced in the UCM Administration Applets, that request the user and password confirmation for each time the applets are executed,
Is there any configuration in the UCM that activates this behavior?
I’m trying to reproduce this behavior in the development environment but with not much success
The UCM version is 10.350
Thanks for your support.

Is there any configuration in the UCM that activates this behaviorNo. It's more likely that you are accessing the applets via a URL that does not match the one you originally used to log in to the Content Server.
For example, you logged into "http://myserver/cs" or "http://<ip address>/cs". However, your HttpServerAddress variable is defined in Content Server as "http://myserver.mydomain.com". (Any absolute links to the applets use the variable to build the URL.) The browser "thinks" this is a new domain, and doesn't forward credentials to the different address. So the applet must prompt again for credentials. (Are you using a load balancer by chance? Does your HttpServerAddress variable in Content Server match the DNS entry being used for the load balancer?)
I've also seen some versions of the Sun client JRE do this by design as a security "feature". If you using IE, make sure your server address is in the "trusted" or "intranet" security zone.

What is the user and password to Oracle 8.17

Dear expert,
I have loaded IDES 4.7 with Oracle 8.17.
I wish to query the SAP table using Oracle PL/SQL.
What is the user, password and string to login into SAP Oracle database? Since I was not asked for user and password when installing Oracle I do not know how to login.
Also can you let me know how to view/change table fields in SAP tables. I understand there are different ways but which in your opinion is the easiest to find the record I want to correct(as some tables have many fields).
Your kind assistance is appreciated.

Thank you for your reply. Both the user and password does not work on my IDES 4.7e system.
However I tried with user Internal and without password and I successfully login.
I then create a new user and also change the user=system
password.

Linking to an OBIEE report without showing the user and password

Hi!
we are trying to access to an obiee report from an external portal (coded with php).
The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
But this url is expossing OBIEE's user and password.
In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
but we couldn't use this aproach due to security issues.
Thanks!
Nuria

Hi!
We have finally done this (and it works!)
<?php
$urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
$ch = curl_init($urlInforme);
$ckfile = tempnam ("./", "CURLCOOKIE");
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$output = curl_exec ($ch);
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$fp = fopen("salida.pdf", "w");
curl_setopt($ch, CURLOPT_FILE, $fp);
$output = curl_exec ($ch);
curl_close($ch);
fclose($fp);

Reset the user and password in the config tool

Dear All,
how can I reset the user and password in the config tool ?
Regards
ertas

how can I reset the user and password in the config tool ?
Section from help:
http://help.sap.com/saphelp_nw70/helpdata/en/1c/129d440bbe4b7d8ae8b82879808d7e/content.htm
Section from SDN Wiki:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/to%252breset%252badministrator%252bpassword%252bthrough%252bconfig%252btool
Regards,
Abhishek.

Can't activate ipad which we forget the user and password

can't activate ipad which we forget the user and password
what i need to activat it please

Strange that you all (we) cannot remember user and password.
Got any reason why?

Restrict the User name / Password Auto complete option for users accessing

Hi All,
Can any one know the Restrict the User name / Password Auto complete option for users accessing Portal from within and outside of Portal.
Regard's
Rama

Are your referring to the browser functionality of remembering the usernames and passwords?
Thanks,
GLM

TS3899 cannot get mail.....The user or password for AOL is incorrect

Cannot get mail....The user or password for AOL is incorrect

Hello MSPETE50,
Thank you for using Apple Support Communities.
I see you are having issues with getting mail from your AOL account. The following article should help you troubleshoot the issue and get it sorted out.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Regards,
Jeff D.

How do I generate a TripleDES key from the user's password?

Is there any standard way to generate a Key (for TripleDES for example) using a user provided password? I want to store encripted data and I see TripleDes key has to be 24 bytes long, so how do I generate it consistently and safely from the user provided password?
I know how to actually build a key with the keyfactory, I'm talking about the aproach to generate good keys from a user entered string. It can't be random keys since I have to store those encripted files and restore them later.

Is there any standard way to generate a Key (for
TripleDES for example) using a user provided
password? I want to store encripted data and I see
TripleDes key has to be 24 bytes long, so how do I
generate it consistently and safely from the user
provided password?
I know how to actually build a key with the
keyfactory, I'm talking about the aproach to generate
good keys from a user entered string. It can't be
random keys since I have to store those encripted
files and restore them later.Hi , i�m having the same problem, i was wondering if yoy found any solution so far.
I�ve tried this
SecretKey symmetricKey = SecretKeyFactory.getInstance("DESede").generateSecret(new PBEKeySpec("mypassword".toCharArray()));But it returns java.security.spec.InvalidKeySpecException: Inappropriate key specification
I have also tried to this:
SecretKey symmetricKey = SecretKeyFactory.getInstance("PBEWithMD5AndTripleDES").generateSecret(new PBEKeySpec(password.toCharArray()));But it results on different byte arrays whenever i try to do the encrypting, i mean it allways returns different encryptatios. I suposed it could be becaus it�s using some kind of random, and i need to have always a specific result.

What is the encryption method for the user's password?

hi all,
who knows what is the encryption method for the user's password?
the password is 803004, and i get the encrypted string "D7EDED84BC624A917F5B462A4DCA05CDCE256EEEEEDC97D59A57930E06CF9781E022CC8E430FF04E"
thanks,
dan

There is no default password for a guest user unless you've created one:
(screenshot from the System Pref Guest User Pane)

The user ID, password cannot be authenticated. Make sure you entered valid

Hi experts,
i've installed BPC NW 7.5, now i receive the error in subject when i try to logon from server manager, client, web...
Following sap note 1380518 i checked COM+ credential, but never changed.
The system was installed with CMS authentication, i created the user BPC_SYSADMIN on the DC with admin right on local server, the same user has admin rights on CMS also. I tried changing user definition (with domain and without) on server manager, on COM+ application identity tab, and in table UJA_SVR_DEFAULT on the Abap server, nothing happened.
Any help is appreciated.
Regards,
Simone Caponecchi

Hi,
Thanx for the feedback !! really appreciate it. Here is the response:
The COM components are ok, as well as the MSMQ and every other component you mentioned (also reinstalled it). I reactivated all "dictionary" to the 3 users created in ABAP, changed role to communication, and give SAP_ALL permission.
In the machine, changed the Default web site to port 81 (to let BPC website take port 80)
Reinstalled NET 2.0, set all components for BPC website to Net 2.0
Created the 3 abap users in domain and gave in both systems the same password.
Entered in the machine as the administrator user (also administrator in Netweaver) and started the installation without trouble.
After that, tried to run the server diagnostic but this user was lacking permits, so I added the 3 users (abap) in the local machine as administrators, in a new group called BPC (only giving the administrator role). Entered now in the machine as BPC_SYSADMIN and ran the Server Diagnostic without trouble.
After doing this, I now am facing an issue trying to add users to the 1° appset... choosing the domain users... however someone mentioned that this is related to the NET tier, is it better to reinstall this tier completely or at least try with NET 1.1, but im just about to find out.
Thanx again for the response.
Velázquez

Find the user exit while creation and change of sales order

Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022     The logic for the user exit to explode should consider the following assumptions and validations
o     Customer master to have the entry at KNVV-KVGR1
o     Material master to have the entry at MVKE
o     UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o     Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A     Quantity / Scale     UoM     Price(£)
     0-10     PAL/TES     20
     11- 20     PAL/TES     10
     21- 30     PAL/TES     5
     31-40     PAL/TES     2.5
     >41     PAL/TES
Product B with Scales mentioned below
Product B     Quantity / Scale     UoM     Price(£)
     0-15     PAL/TES     25
     16-20     PAL/TES     20
     21- 30     PAL/TES     15
     31-40     PAL/TES     10
     > 41     PAL/TES     5
u2022     Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022     The expected results should be
o     Product A qty 10 + B qty 15 added = 25Pal
o     The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.

Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022 The logic for the user exit to explode should consider the following assumptions and validations
o Customer master to have the entry at KNVV-KVGR1
o Material master to have the entry at MVKE
o UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A Quantity / Scale UoM Price(£)
0-10 PAL/TES 20
11- 20 PAL/TES 10
21- 30 PAL/TES 5
31-40 PAL/TES 2.5
>41 PAL/TES
Product B with Scales mentioned below
Product B Quantity / Scale UoM Price(£)
0-15 PAL/TES 25
16-20 PAL/TES 20
21- 30 PAL/TES 15
31-40 PAL/TES 10
41 PAL/TES 5
u2022 Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022 The expected results should be
o Product A qty 10 + B qty 15 added = 25Pal
o The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.

Online Adobe Interactive Form must be changed before SAVE works properly

HI guys,
We are using Adobe Reader X.
We arr launching an ABAP Web Dynpro application that has an Adobe Interactive Form linked to it.
Our Adobe Form has many "subforms" and we determine what you see based off your Web Dynpro choices
The problem we are having is the display of the Adobe Form will change perfectly, but if you SAVE a copy to your PC using the Adobe buttons, what gets saved to your PC doesn't match what you see on the screen.
However, if you change any data on the Adobe Form and then SAVE, the version on your PC now matches what you see on the screen.
Has anyone else run into this?
Thanks,
Anthony

Hi Antony,
At the 1st intance, you have data completly, and on change event you are making the subforms visibility dyanmically.
Fine now once the form is saved locally, and then its opened, the Abobe reader doesn't know the visibility status.
So here again on form ready check the repective field value which treggers its visibility and set its presence.
For example: if the form is like flowing to different users in a workflow, to maintain its earlier status this is how I do it.
which mean I will have a same validation and script for both form ready & change events.
Hope this helps you out.
Cheers,
Sai

The user's password must be changed before signing in

Similar Messages

Maybe you are looking for