The user status and system status

hi, expert.
1.  how to bind the user status and the system status.
2.  if the status of the network is "CRTD", the status of  WBS can't be "TECO".
how to customize.
Please explain me all the steps to be required.
Thanks in advance!

Hello
Define User status in OK02. Define various statuses and number them. Then double click on each status n you will be taken to transaction control screen. Here click on create tab and then set the influencing statuses for each system status. However this will be individual for WBS and Network.
Define them seperately for WBS and Network
Thanks

Similar Messages

  • User status and System status for Trade Promotion

    Hi all!
    CRM 7.0 Web UI Trade Promotion Management.
    I have a trade promotion with custom status already assigned and visible from WEB UI, Is it possible assigning to such TP also a standard status picked amongst TP system status?
    Take into account that in the as is configuration we find in the same TP drop down list user status and system status.
    2 questions:
    1.     How can I hide the system status?
    2.     It is possible to group together user status and system status? E.g. User status: fundrequest, inplanning, submitted...+ released (system status).

    Hi Virginia Zitun,
    Can you tell me how did you manage to solve the issue.
    rgds,
    Venkat

  • EQUIPEMENT - User status and system status

    Hi freind,
    It would be great help if someone can brief me on  procedure / bapi or function module availability for USER STATUS and SYSTEM STATUS update to equipement.
    regards
    Pravin

    hi Pravin,
    Check this out
    <b>USER STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/56/254c40cc538437e10000000a155106/frameset.htm
    <b>SYSTEM STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/bd/7924da4d0d9043b426fc081669f27a/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/9f/972f72ec2a40479d2a7dec4500a4f2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/68/ebac18beabc34b90d4c1949a66dece/frameset.htm
    <b>USER STATUS</b>/<b>SYSTEM STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/89/a432ff461e11d182b50000e829fbfe/frameset.htm
    Regards,
    Santosh

  • Maintain the link between user status and system status

    Hi friends,
    my requirement is In crm transactions when we change the system status(inprocess) then the relevant user status            (inprocess) is also to be changed automatically. how can we do this? wt r the customisations we can do for this?
    pls suggest me? thanks in advance.

    Hi Madhu Sudan,
    When you create User Status in Status Managment...
    Eg: Inprocess
    You assign User Status Triggers Business Transaction.
    So, This maintain the link between the User and System statuses.
    Reward Points if helpful.
    Srini.

  • Connection between USER STATUS and SYSTEM STATUS

    Hello,
    Is there a data base table that connects USER STATUS to SYSTEM STATUS by transaction types?
    Thank you very much.
    Ohad

    Hi Ohad,
    Check if the table JEST helps you.
    Pass the Object Number in OBJNR.
    Also tables TJ02 and TJ30 might be useful.
    Regards,
    Saumya

  • User Status and system status

    Hi PS Gurus,
    As per client requirement
    a)no finance posting
    b)no cost planning
    c) no budgeting
    only project ,wbs and network(no activity) should be created .
    These all transection should be carried out after releasing of particular WBS,Network (System status REL ).
    We have created user status profile in ok02 and assigned in project profile
    Data maintained in status profile
    St NO Status   StatusShort Text                   Lowest   Highest  Posit    Prior      Auth. cod    
    1    CRET  CREATED                                     1           2         1          1                 
    2    REL   STOP DATA UNLESS REL               2          2         1           1                 
    In status CRET  we have forbidden all business transection which client don't require.
    But when we are relasing the WBS (system status REL) ,user status is remain CRET .
    We want that after releasing WBS ,user staus should change to REL. which allows the all busness transections.
    Kindly help
    Regards
    Project Team 1

    Hi Experts,
    Actually, I have done as suggested over here like creating a NREL user status and it is working fine, but for my client, I had to ensure that the "Release" is allowed only after the  budget is released ( after CJ32). This is working till the time it gets the Sys. status "BUDG" and BUDG gets assigned immediately when we give the budget through CJ30. How to do this ?
    Also, I want this to get only assigned to the topmost WBS whereas as I had assigned this Status profile in the Proj. profile, it is getting assigned for all the WBS... how to overcome this problem ?
    thanks in advance,
    Vinodh.

  • User Status and System Status - CJ20n

    Hi,
    I would like to know if any problem but when i have the user status and the system status are filled those fields no longer appear in the TC CJ20N.
    What could be the problem??
    tks in advanced

    I know it's been a long time, but I think I can help...
    Didn't you activate que status exit?
    If yes, you problem is there, you have to pass the information from IMPORT to EXPORT in your exit, or deactivate it.
    Best regards,

  • How to get user and system status for a trade promotion

    Hi,
    I have to develop a batch program to change user status and system status of all trade promotions which satisfy some criteria. This criteria checks some dates related to trade promotion(like Changed on,Pallett buying, buying horizon dates) also.
    I thought of first extracting all external ids from CGPL_PROJECTS table and then run trade promotion query. But how can I get current user & system status and all dates as these can be taken from relations "TPMStatusActiveRel" and "TPMDateRel". I don't know to take data from relations. Please help me with a piece of code.
    Thanks.

    Hello Shikha,
    You can use these relations here, as you are not in the Business Object layer anymore. As far as my understanding is, all the batch programs or reports should be done at the API layer. Try this code, to read the status of the Trade Promotion object.
    data: lr_appl_base type ref to CL_CRM_MKTPL_APPL_BASE,
            lt_sys_status type CGPL_ISTATUS_TEXT_T.
    lr_appl_base ?= CL_CRM_MKTPL_APPL_BASE=>GET_INSTANCE().
    " To read system status
    call method lr_appl_base->STATUS_READ
    exporting
    IM_MKTELEMENT_GUID = "your Trade promotion guid
    ET_TJ02T  = lt_sys_status.
    " To read user status
    call method lr_appl_base->STATUS_READ_EXTERN
    exporting
    IM_MKTELEMENT_GUID = "your Trade promotion guid
    ET_TJ02T  = lt_sys_status1.
    To change the user status, use the method STATUS_CHANGE_EXTERN of the same class
    To set the system status, use the method STATUS_SET of the same class.
    Hope this helps.
    Regards,
    Vinay

  • Service tickets - User and system status

    Hi guys
    This is the scenario, there was a complaint raised by our resolver groups saying that they were unable to open any service tickets logged through to them from our Contact Centre Agents. All this happened in a space of 5 hours only
    Under the Header Overview of these service tickets, when I view the changes to this document, i saw that every service ticket that was logged user status shows CLOSED and system status shows COMPLETED
    Please advise what could have caused this?
    Ravi

    Hi Arden
    Went through a few of those cases and picked up this
    The last system status entered shows TO BE DISTRIBUTED - by the Interaction Agent user
    Responsible Group deleted - and new value shows the new responsible group
    But the time frame bewteen the old value and new value is what concerns me. Theres a gap of about 45 minutes on average from the time the case is logged "open" till the time the case is "in process" by the resolver
    But as per the resolver groups, they could not access these cases once they were logged. So it seems these cases were all "locked" basically and could only be access minutes later
    Ravi

  • Posibilities of user and system status?

    Hi CRM experts,
    I've some doubts respect the user and system status configuration.
    My client wants to stop the upload process (to R3 site) of a Sales Order document, regarding a specific user status. Then, they want to restore the uploading process regarding into a specific user status different from the firts one.
    User Status -             System Status
    Status 1 -                Stop uploading process
    Status 2 -                Restore the uploading process
    I made the following customizing in my status profile (assigned to my Sales Order transaction)
    User Status -  Transaction Control -  Forbidden -  Set
    Status 1 -     To be distributed -    X -           X
    Status 2 -     empty -           empty -           empty
    When I save a Sales Order in Status 1, the BDOC is correctly generated and the document is not present in R3 environment. The problem occurs when I modify the Status, from Status 1 to Status 2. The document is in R3 environment (???) but the generated BDOC remains in Yellow light.
    Is correct to implement this uploading behaviour regarding a user status like my configuration? May I implement some checks on the upload BADI better?
    I need some help in these questions please.
    Thanks in advance

    Hi,
    It might be easier if you could come to a scenario were one specific user status should trigger the distribution. Then you have a direct link between a user status & a system status, meaning that there is no need for additional coding.
    If the bdoc remains in intermediate state, then that means there's an error in the queues or a short dump. check transactions smq1 & smq2 and ST22 in both systems.
    Michael.

  • User-command and pf-status

    Hi can anybody please give tell me what is the user-command and what is pf-status.
    please provide me a sample code how to create these step by step.
    and how to copy standard pf-status to user defined one.
    thanks in advance
    kp

    hi,
    The Standard List Status
    As with normal screens, you can define your own GUI status for lists and attach it to a list level using the SET PF-STATUS statement. If you do not set a particular GUI status, the system sets a default list status for the list screen in an executable program. In other programs, for example, when you call a list from screen processing, you must set this status explicitly using the statement
    SET PF-STATUS space.
    This default interface always contains at least the functions described in the Standard List section.
    Unlike normal dialog statuses, the default list status is affected by the ABAP program.
    If you define event blocks in your program using the event keywords AT LINE-SELECTION or AT PF]
    This statement sets the status  parameters. To display an ampersand character ‘&’, repeat it in the title ‘&&’.
    Examples
    Example for dialog status in a list.
    REPORT demo_list_menu_painter.
    START-OF-SELECTION.
      SET PF-STATUS 'TEST'.
      WRITE:  'Basic list, SY-LSIND =', sy-lsind.
    AT LINE-SELECTION.
      WRITE:  'LINE-SELECTION, SY-LSIND =', sy-lsind.
    AT USER-COMMAND.
      CASE sy-ucomm.
        WHEN 'TEST'.
          WRITE:  'TEST, SY-LSIND =', sy-lsind.
      ENDCASE.
    This program uses a status TEST, defined in the Menu Painter.
    Function key F5 has the function code TEST and the text Test for demo.
    Function code TEST is entered in the List menu.
    The function codes PICK and TEST are assigned to pushbuttons.
    The user can trigger the AT USER-COMMAND event either by pressing F5 , or by choosing List ® Test for demo, or by choosing the pushbutton Test for demo.The user can trigger the AT LINE-SELECTION event by selecting a line.
    Example of setting a dialog status for the current list
    REPORT demo_list_set_pf_status_1.
    DATA: fcode TYPE TABLE OF sy-ucomm,
          wa_fcode TYPE sy-ucomm.
    START-OF-SELECTION.
      wa_fcode = 'FC1 '. APPEND wa_fcode TO fcode.
      wa_fcode = 'FC2 '. APPEND wa_fcode TO fcode.
      wa_fcode = 'FC3 '. APPEND wa_fcode TO fcode.
      wa_fcode = 'FC4 '. APPEND wa_fcode TO fcode.
      wa_fcode = 'FC5 '. APPEND wa_fcode TO fcode.
      wa_fcode = 'PICK'. APPEND wa_fcode TO fcode.
      SET PF-STATUS 'TEST'.
      WRITE: 'PF-Status:', sy-pfkey.
    AT LINE-SELECTION.
      IF sy-lsind = 20.
        SET PF-STATUS 'TEST' EXCLUDING fcode.
      ENDIF.
      WRITE: 'Line-Selection, SY-LSIND:', sy-lsind,
           / '                SY-PFKEY:', sy-pfkey.
    AT USER-COMMAND.
      IF sy-lsind = 20.
          SET PF-STATUS 'TEST' EXCLUDING fcode.
        ENDIF.
        WRITE: 'User-Command, SY-LSIND:', sy-lsind,
             / '              SY-UCOMM:', sy-ucomm,
             / '              SY-PFKEY:', sy-pfkey.
    Suppose that the function codes FC1 to FC5 are defined in the status TEST and assigned to pushbuttons: The function code PICK is assigned to function key F2 .
    When the program starts, the user can create detail lists by selecting a line or choosing one of the function codes FC1 to FC5. For all secondary lists up to level 20, the user interface TEST is the same as for the basic list:
    On list level 20, EXCLUDING ITAB deactivates all function codes that create detail lists. This prevents the user from causing a program termination by trying to create detail list number 21.
    Example of setting a dialog status for the current list
    REPORT demo_list_set_pf_status_2.
    START-OF-SELECTION.
      WRITE: 'SY-LSIND:', sy-lsind.
    AT LINE-SELECTION.
      SET PF-STATUS 'TEST' IMMEDIATELY.
    After executing the program, the output screen shows the basic list and the user interface predefined for line selection (with function code PICK).
    When you choose Choose, the user interface changes. However, since the AT LINE-SELECTION processing block does not contain an output statement, the system does not create a detail list: The status TEST is defined as in the previous example.
    Example: Titles of detail lists.
    REPORT demo_list_title .
    START-OF-SELECTION.
      WRITE 'Click me!' HOTSPOT COLOR 5 INVERSE ON.
    AT LINE-SELECTION.
      SET TITLEBAR 'TIT' WITH sy-lsind.
      WRITE 'Click again!' HOTSPOT COLOR 5 INVERSE ON.
    Regards,
    Sreevani.

  • "System status AALK is active" and "System status LKD is active" errors

    Hi,
    We are on SRM 4.0.  When creating a shopping cart from a specific catalog the user is receiving two error messages.
    "System status AALK is active"    and    "System status LKD is active"
    How do I resolve these errors?

    It's more like a  CA-JVA-JVA-PP or PS-ST-INT-BAPI issue, recommend to report a message under one of the component.

  • I just bought macbook pro with 10.8.3 os. When i start the system, all applications automatically start up as well! How can I turn them off. I checked the user settings and no application is set tom open automatically!

    I just bought macbook pro with 10.8.3 os. When i start the system, all applications automatically start up as well! How can I turn them off. I checked the user settings and no application is set tom open automatically!

    You have 14 days to return the computer w/no questions asked.  Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.

  • The difference between the QM status and total status of a request?

    Hi Experts,
    I have some confusion about the concept of the status of a request. In the data target management window, we have QM status and technical status of a request, and in the monitor, we have total status of the request. Can somebody tell me the difference between the three. Please give me some detailed info about this or provide me some document regarding this. your great help will be highly appreciated.
    Eileen

    QM status can be edited..but technical status cannot be edited..
    in the monitor..only total status can be edited..
    please see this link..gives the required info..
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a663ce07211d2acb80000e829fbfe/frameset.htm
    Vishvesh

  • Packing status and delivery status

    What are the fields for packing status and delivery status?

    Hi,
    Please check tables VBUK (header status) and VBUP (item status).
    VBUK-LFSTK ((Delivery status)
    VBUK-PKSTK (Overall packing status of all items)
    VBUP-LFSTA (Delivery status)
    VBUP-PKSTA (Packing status of item)
    Regards,
    Ferry Lianto

Maybe you are looking for