The usual - Where is the new 10.5.8 for My Settings

The usual … Where is the new 10.5.8 for My Settings

Would it be possible to post a notice in this forum that a new OS version profile setting is available when the settings have been updated? This might help reduce the speculation but primarily it would serve as a reminder for users about keeping their profiles updated....

Similar Messages

Webutil-Problem (not the usual "PRE-FORM", "WHEN-NEW-FORM-INSTANCE" etc.)

Hello,
We have an application with lots of modules, where we use webutil to create text files on the client for data exports. The export is called in a WHEN-BUTTON-PRESSED Trigger and usually works fine, but we have the following problem:
If two modules, where webutil is used, are opened at the same time and one module is closed, webutil does not function anymore in the other module. If we then try to create a text file after closing on module, we get the following error-message:
Oracle.forms.webutil.file.FileFunctions bean not found.
WEBUTIL.FILE.FILE_SELECTION_DIALOG_INT will not work.
It’s not only the FileFunctions bean, all other webutil functions do not work also anymore in the remaining module.
This is not the usual “PRE-FORM”, “WHEN-NEW-FORM-INSTANCE” etc. Webutil-Problem.
As I said before, webutil works, but when we close one module with webutil used, it does not work in another open module anymore.
Any Idea, why this happens and how to solve the problem???
Kind regards
Udo

Hello,
Yes, both modules work in the the same session and session is not disconnected, when one of the modules is closed.
Webutill.pll is attached on both forms and all forms in our application using webutil usually work fine with the exception mentioned above.
It's a bit difficult to explain, what happens in our application, but I try:
Our application consists of modules that call other modules with call_form or go_form , when the module is open, all in the same session. "Global" Parameters are passed with SHARE_LIBRARY_DATA. Usually the calling forms stays open.
In the following constellation webutil does not work anymore at a certain point :
- Open module A (with webutil attached) and webutil works
- Then module A calls module B (with webutil attached) and webutil works in module B
- GO_FORM (module A) and webutil still works (while module B is still open)
- CALL_FORM (module C) (in our case webutil is not attached to this module, but I think that is not the problem) module C closes module B (while module A stays open)
- After making a choice in module C, module C closes itself with EXIT_FORM.
- Go back to the open module A, make a new query with the choice made in module C and webutil does not work anymore in module A
Regards
Udo

HT4528 Is there a fix for the bug where my BRAND NEW iphone 5S is locking up when I enable the magnifying glass to edit a text and it locks up!?

Is there a fix for the bug where my BRAND NEW iphone 5S is locking up when I enable the magnifying glass to edit a text and it locks up!?

Try a reboot press & hold power button & menu until Apple Logo comes on then wait
you will not lose any data.
That may fix your problem.
bsydd uk

Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.

Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.
The first one, my private home email, works fine. With the other 3, I get the message "Cannot get mail: The connection to the server failed"
All were working fine before the 8.3 upgrade. I did try the old trick of making one minor change on the account and resaving, but that did not change anything. I even deleted my work account and re-entered it from scratch, but again, sadly, no luck. For the time being, I am successfully getting the email via IMAP, but this ***** compared to exchange. Anyone have any idea what is happening or if a fix is in the works?

Well, the one set up on exchange 2k3 is now working fine, although no changes were made on either the iPhone or the exchange side, so that's fun, but it still is throwing errors when connecting to the other 2 exchange accounts. The common elements are that both non-functioning exchange accounts are google apps for business accounts. So is one of the ones that's working, by the way. The settings on both accounts are the same as the one that's working, and both worked fine before the 8.3 upgrade. I have no issue accessing both of these accounts on my ipad which is currently on 8.2.x. If it's not the iphone OS at fault, I'm at a loss as to what it could be.

I bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

i bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

You cannot get around Activation Lock without the oringinal owner disassociating the iPad from their account.
See the Activation Lock FAQ for what you and they need to know.

When I open a folder then open a document in the folder every time i close the document it closes the folder where is the back button ?

When I open a folder on my mac pro retina osx 10.9.1 then a document every time I close the document it closes the folder where is the back button?

Try COMMAND-[.
Ciao.

If I want to do that in windows, open multiple windows firefox, they show up in the taskbar, where is the equivalent on Mac?

if I want to do that in windows and firefox: open multiple windows i mac, they show up in the taskbar, where is the ekvivalent in mac?

Switch 101: On Windows, I used to…
<http://support.apple.com/kb/HT2514>
Mac 101: The Dock
("The Dock […] holds windows in their minimized state.")
<http://support.apple.com/kb/HT2474>
Want Mac? Forget Windows. Talk Mac, walk Mac, do Mac. Read
<http://www.apple.com/support/mac101/work/>

HT4796 Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

Hello. It looks like I recovered all my keywords attached to photos. What I did:
First I located all photos without keywords using a metadata search.
I found that it seemed to be certain groups of photos that had no keywords. I decided to at least get the main keyword on all of those in a particular group, like Canyonlands.
Once I added one of the keywords, the others all showed up magically! I then went to each group of photos and added the main keyword, and the others came along and attached to the photos.
Don't understand why this occurred or why it got fixed, since it was so random. But, I'm glad to have my keywords restored (I had divided flowers by color, etc. so it was a lot of work!)
Thanks for the discussion and help.

I can't make a call? The usual response I get i get is to check phone settings?. I tried to reset the network already still the same

I can't make a call? The usual response I get i get is to check phone settings. I tried to reset the network already still the same problem. What is the possible problem? I can send message and receive calls

Hey Rache0105,
Some of the steps you've already done, but I would run through the iPhone Troubleshooting Assistant for call issues. You can find it here:
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

I took a text picture when I was using the keyboard where did the picture go?

I took a text picture when using the keyboard where did the pictures go

Is your question related to Adobe Reader on Android? Could you please elaborate more?
Thanks,
Adobe Reader Team

Can not move my apps to different screen the usual way on my new iPad 2?!

Ok got my new iPad love it! But I can not move my apps to condense them to one screen. I know how to do it the way apple suggests but it does not work. Pressing the app until it wiggled then pulling it to the edge will not allow the screen to change and move the app. It just bounces off the side like it hit a wall. I can arrange them and consolidate them the usual way just not move them. So now I have 2 or three apps on 8 pages! I also found that when I synced the iPad with my MacBook Pro it installed all my iPhone apps as well. At first I could not understand why the app looked small then I realized what it did so I deleted all the iPhone apps off the iPad. Any idea why this is occurring?

Try a System Reset:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162.
http://support.apple.com/manuals/#ipad
Finally, a less thorough version of the Guide is included as a Safari bookmark and a more thorough version of the Guide can be downloaded at no charge via iBooks.

I need to restore my IMAC to factory setting but i donot have the disks, where can i purchase mac os x for 10.5.8

I need to purchase mac os x for 10.5.8
would anyone know which version disks i need and where i can purchase them?
I have one pair of disks from my new version of imac but when i try to reset it tells me that this disk can not be used

you can try and call apple sales 1.800.my.apple. but that is a long shot. You will most likely need to purchase the retail disk on the secondary market and the 10.5 disk is very expensive, and I don't believe it will contain the applications.

If I remove a stack from the dock where do the files go?

I have numerous files and folders in the Documents stack. I really don't need to see most of those files. If I remove the Documents stack form the Dock will I lose the files? Where will they be?
Thanks

So, I'm new to Macs, but if I understand correctly, I could click on the Macintosh HD icon, then go to Users and then to my folder, once there I can create a new folder and put my commonly updated files in there. Then I could remove the Documents folder from the Dock and I should have what I want: frequently updated files in a stack on the dock and less frequently used files/folders still in my folder (ie the Home folder) which would be accessible through the Finder.
Right??
Thanks

Has anybody else been seeing (Not Responding) at the top of the screen and having thier browser not respond to wheel scrolling and scrolling with the usual slider at the right part of the screen?

I have noticed my Firefox browser is having way too many incidences where it is "Not Responding". The browser freezes up for a second quite often and the "Not Responding" message will appear at the top of the screen.
The browser will also not scroll with either the scroll bar on the right nor with the mouse wheel. Both used to work in previous versions of Firefox, but it seems to have gotten worse since Firefox 5 0r 6. The same with the "Not Responding". It is happening more with Firefox 7 than in at least the past two versions.
Anybody else having these issues? Seems like they are hand-in-hand. Thanks for any and all help or advice. It's making me pretty angry since I'm online all day for work.
Just an FYI. At the bottom of my troubleshooting copy/paste is a suggestion to update the driver for my graphics. That was a no-go. I tried that.

Thank you for this first reply! I'll have to give this a try later....the main laptop I experience this on crashed not more than an hour after I posted this issue. I'm on a tiny, slow netbook that hasn't had the same problem. Now I'm wondering if I picked up a Trojan on the main laptop and the "Not Responding" message is a side effect of a virus or Trojan.
One of the system .dll files has been corrupted and I'm not being allowed to use recovery discs, previous disc images, or any recovery options. That was an all day sucker yesterday and from what I've read on forums and have researched, it appears I'm going to need to reload the operating system. If it is indeed a Trojan/virus, I'm surprised it made it through my antivirus and firewall. Anything is possible, really.
Thanks again, I'll get back with results once I get the wounded laptop back up and running.

A form field (for a client fax number) on my own web site is remembering my email address used to log into the site. The usual clearing of the remembered entry works OK, but evey time I remember the login it automatically populates this one field with my

The form where this happens contains an email field as well as a password field, so it does have both of the fields that are on the login page. It is used to modify the details of the user of our site and is accessed by the administrators, not the users themselves. To auto fill the fax field (which is named _fax) with my email address is very strange. If I log in as a different admin user then the email address I use to login appears in the field. The password field is also appears on the form and is being populated, presumably with my password. How can Firefox get it wrong and put an entry in a field with a different name, and why that field and not other empty fields on the form?
== This happened ==
Every time Firefox opened

First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

The usual - Where is the new 10.5.8 for My Settings

Similar Messages

Maybe you are looking for