The value of sysdate function is sometimes not equal with O/S date.

Hello, everyone.
I administrate oracle 8i database that consists of OPS.
The problem is that the value of sysdate function is not matched to OS date.
It's runing commonly in equal state. but sometimes occurred, and the gap is one hour or one date.
There are not any other logs and traces in the distination of oracle dump.
So I can not detect what oracle event is happened on that time which the problem is occurred.
Is there oracle event in this case?
Could you reply to this problem?
OS ver : HPUX 11.11
DB ver : 8.1.7.4 OPS

Please look into metalink note 1017965.102 for this
You may need to change some settings in the System level to reset the Timde differential factor

Similar Messages

We had a MacBook Pro stolen from our home when we were out of town and I am pretty sure we never activated the LoJack type of function on it not sure if its called lojack but you get what I am saying is there any way we can activate such hardware/app now

to
We had a MacBook Pro stolen from our home when we were out of town and I am pretty sure we never activated the LoJack type of function on it not sure if its called lojack but you get what I am saying is there any way we can activate such hardware/app now so we can possibly recover our laptop? Any one who can point us in the right direction that would be great and we would be very grateful. Thanks So Much

Lojack for laptops - if that is the product you purchased and installed, you will need to read the user manual or contact the manufacturer as it is 3rd party. You did file a police report right?

Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message

Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message. In fact, in the same screen I can often open an email from the same sender with email intact. This is weird. Sometimes I close the page and open a new page. Sometimes that works and sometimes it does not. It is a very annoying thing.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Previously i use ios 4 version 4.2.1 then i updated to 4.3.3 the problem is my network coverage sometimes not in service or no network?now i update to ios 5 its still happend?can advice me..

Previously i use ios 4 version 4.2.1 then i updated to 4.3.3 the problem is my network coverage sometimes not in service or no network?now i update to ios 5 its still happend?can advice me..

Scroll down and see the "Update Your Device Using iTunes" section here:
HT4623
There is no "update icon" in iOS versions earlier than iOS 5.
The update is very large (over 1.2 gigabytes). You need a good internet connection to download it to your computer. Maybe you'll need to take a trip to a city to get a good enough connection.

Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration

When I try to start Windows installer in Services.msc, it gives me this error Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration. How do I fix this? I am running Windows 7 ultimate.

Hi,
Based on the error code, we can use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration for Windows Installer service.
Besides, the following two threads focus on the similar issue and can be referred to as reference.
Error 1297: "ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297” FTP service in Windows 7 computer
http://social.technet.microsoft.com/Forums/windows/en-US/52329b48-1ba9-4cab-a6b2-efd8db173625/error-1297-errorincompatibleserviceprivilege-1297-ftp-service-in-windows-7-computer?forum=w7itpronetworking
Service fails to start, error 1297 and 7000
http://social.technet.microsoft.com/Forums/windowsserver/en-US/419ba006-4413-4036-8c49-252b08593131/service-fails-to-start-error-1297-and-7000?forum=winserverDS
Hope it helps.
Best regards,
Frank Shen

There was an attempt to change the value of a control that is not visible.

I am getting the below error on submitting on a screen.
"There was an attempt to change the value of a control that is not visible. The submitted value for this control has been discarded."
I am setting the values of the controls in "OnGetScreenEventHandler, OnInvestigationEndedEventHandler" implementation. Is there any way to check if the control is visible?
Thanks,
Rajan

Hi,
How Do I Check for the control Visiblity in the above said event handler?
Here is my code
private void formattAllDate(SessionContext currentContext) {
     log.debug("R2_XSR: Formatting all date");
setGlobalInstanceValue(currentContext,"Date1",formatDate(getGlobalInstanceAttribValue(currentContext, "Date1")));
setGlobalInstanceValue(currentContext,"Date2",formatDate(getGlobalInstanceAttribValue(currentContext, "Date2")));
setGlobalInstanceValue(currentContext,"Date3",formatDate(getGlobalInstanceAttribValue(currentContext, "Date3")));
setGlobalInstanceValue(currentContext,"Date4",formatDate(getGlobalInstanceAttribValue(currentContext, "Date4")));
setGlobalInstanceValue(currentContext,"Date5",formatDate(getGlobalInstanceAttribValue(currentContext, "Date5")));
setGlobalInstanceValue(currentContext,"Date6",formatDate(getGlobalInstanceAttribValue(currentContext, "Date6")));
setGlobalInstanceValue(currentContext,"Date7",formatDate(getGlobalInstanceAttribValue(currentContext, "Date7")));
private void setGlobalInstanceValue(SessionContext currentContext, String attribute,Boolean value){
     try{
          currentContext.getInterviewSession().getRuleSession().getGlobalEntityInstance().getEntity().getAttribute(attribute).setValue(currentContext.getInterviewSession().getRuleSession().getGlobalEntityInstance(), value);
     }catch(Exception e){
          e.printStackTrace();
private String formatDate(String dt){
String newdt[]=dt.split("/");
if (newdt.length==3){
return newdt[1]+"/"+newdt[0]+"/"+newdt[2];
return "";
}

Good Morning, Are there any other donotfollow plug-ins or add ons for the version 4 of Firefox? The one available on your site will not work with version 4. Thank you.

I am starting to affiliate market and need a donotfollow plug in or add on and the one available on your site will not work with version 4 of Firefox. Is there another place I can go or do you have another add on that will perform the same function as the do not follow you have on your site for the previous versions of Firefox? Any help would be greatly appreciated.

OK - to answer my own question, Apple recommend 8.2.1, but you can install 9.1.1 and it will run on a G3. Very slowly. Looks like this is the only option. Get it here: http://support.apple.com/kb/DL1036. You need OSX 10.4.11 or later though....

ORA-27054: NFS file system where the file is created or resides is not mounted with correct options

Hi,
i am getting following error, while taking RMAN backup.
ORA-01580: error creating control backup file /backup/snapcf_TST.f
ORA-27054: NFS file system where the file is created or resides is not mounted with correct options
DB Version:10.2.0.4.0
while taking datafiles i am not getting any errors , i am using same mount points for both (data&control files)

[oracle@localhost dbs]$ oerr ora 27054
27054, 00000, "NFS file system where the file is created or resides is not mounted with correct options"
// *Cause: The file was on an NFS partition and either reading the mount tab
//          file failed or the partition wass not mounted with the correct
//          mount option.
// *Action: Make sure mount tab file has read access for Oracle user and
//          the NFS partition where the file resides is mounted correctly.
//          For the list of mount options to use refer to your platform
//          specific documentation.

I have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?

i have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?
i had the facebook app but i could never upgrade it and i was ok with using the outdated version but when i reset the ipod so i could gift it to a friend it obviously got rid of the app and now i cant downloaded because it says its not compatable, how can i download the version i had before i reset it?

Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

See #C12 in Time Machine - Troubleshooting

HT201343 I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and third generation loaded with the latest software. Can someone help?

I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay

After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

Hey, I've got the same problem. Did you find any help or solution by now?

After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7

After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

Both of you please choose the correct forum to start a new topic thread. Classic has nothing to do with iOS.
Site map of Communities and Categories

Hii all, I just bought an used iphone 5c from an user and only after a few weeks realised that it got activation locked. He might be unaware of that. Is it possible to get back to him and unlock the device for me as i have not contacts with him presently.

Hii all, I just bought an used iphone 5c from an user and only after a few weeks realised that it got activation locked. He might be unaware of that. Is it possible to get back to him and unlock the device for me as i have not contacts with him presently.

Well first you need to sync your iPhone 4 with your Mac/PC so that it will transfer all your music, apps, podcasts, etc. Then sync your iPod Touch and the media you selected during the sync should be there on your iPhone. If you have difficulty in transferring media from iPhone to your computer, try softwares like TransCopy. They will help in transferring data from your iphone to your computer. Dont forget to check that all the transferred data is in the iTunes media folder so that the iTunes can locate the files. Link to Transcopy software :
http://www.copytrans.net/copytrans.php

HT201317 why the last photos in photo stream are not sync with my iPad?

why the last photos in photo stream are not sync with my iPad?

Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
Photostream only syncs when the camera app is closed, ensure it is closed.
Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

The value of sysdate function is sometimes not equal with O/S date.

Similar Messages

Maybe you are looking for