The version 0000000075 of development configuration is now available

Hi experts,
when im loging into nwdi im getting pop up with below message , can u please explain what is the verison 0000000075 and why is it asking for that..
The version 0000000075 of development configuration is now available
Do you want to update the development Configuration ?
Regards
Govardan Raj

Hi Govardan,
a track has a server side development config (created as per the domain data settings and track data settings i.e. includes cbs, dtr, cms url, sld nameserver and the software component dependencies).
It is an XML file you can check in CMS webui -- Track Data -- Build variants -- display development config.
If you create a devconfig in your NWDS, then this XML file is getting synced to your local space (this is the file called .confdef).
After this no more sync is getting done, but the locally stored .confdef is used by the devconfig, so it knows, which cms, dtr, cbs , sld to contact, etc. in other words: how to use the track.
If you change on the server side devconfig (by changing on say cbs, dtr or sld url or SC dependency setup) then NWDS recognizes that its locally stored .confdef became outdated.
This is why you have that popup that the server side devconf version XY is now available and you can make the locally stored one up to date.
I hope this answers your question.
Best Regards,
Ervin

Similar Messages

  • OracleAS TopLink 10g (10.0.3) Developer Preview 2 - NOW AVAILABLE

    Earlier this week we upgraded the 10.0.3 Developer Preview. The full set of functionality is documented in the release notes available on the preview landing page(http://otn.oracle.com/products/ias/toplink/preview/index.html).
    The functionality added in this refresh of the preview includes:
    - OC4J CMP Support
    - CTS 1.4 compliance
    -Support for hot/re-deployment of TopLink enabled CMP applications
    - Bean Pessimistic Locking - Have any of your beans locked on the database as you access them in a TX
    - Read-only entity beans are now supported
    - Enhanced integration with OracleAS for DMS capturing of performance statistics
    - Object-XML mapping enhanced:
    - Document Preservation - keep your un-mapped XML from being lost in the translation
    - JAXB Compiler - Generate an object model from schema with TopLink MW project
    - EIS/JCA mapping enhanced. Access your non-relational data source through OracleAQ or MQ Series
    - Object-Relational Enhancements
    - Value return from write - Use triggers to assign and return your PK or other calculated values on INSERT or UPDATE
    - Isolated Session Cache - Use TopLink to map your VPD/OLS managed tables
    - Conversion support for oracle.sql.TIMESTAMP & TIMSTAMPTZ
    - Generic history support - With versioning columns you can perform queries for past points in time using the HistoricalSession
    - Stored Function Support - Invoke your favourite stored function in the Oracle DB
    - Configurable query timeout support
    - Enhanced and re-organized examples. See examples link from preview landing page
    Additionally we have also added several new how-to docs that can also be accessed from the preview link above.
    If you encounter any issues with the preview please post them to this forum.
    Cheers,
    Doug Clarke
    Principal Product Manager
    OracleAS TopLink

    Sorry about the link above. Try:
    http://otn.oracle.com/products/ias/toplink/preview/index.html
    Doug

  • [ANN] OC4J 10g (10.1.3) Developer Preview is now available

    OC4J 10g (10.1.3) Developer Preview 3 is now available for download.This Developer Preview is J2EE 1.4 compatible and provides significant new features covering Web Services, general infrastructure services such as classloading, and the first glimpse of Enterprise Manager Application Server Control console to manage, deploy and monitor.
    http://www.oracle.com/technology/tech/java/oc4j/1013/index.html

    I am very sorry .Bu i found so many errors after i tried
    Oracle Jdeveloper 10g(10.1.3)
    I am using a machine with cou 3.0G, 1G DDrR memeory and an chinese windows 2000.I am enjoy using jdeloper9.0.5.2.But when I was trying 10.1.3,I created a normal jsp and made it.I get erros as follows :Error(1,44): [][][][][][][][]。
    I tried to lauch the oc4j server ,got the following errors:Error compiling D:\jdevj2ee1013\jdev\system\oracle.j2ee.10.1.3.3.51\oc4j-config\applications\admin_ejb.jar: Syntax error in source or compilation failed
    04/12/04 21:48:31 Error in application default: Error loading package at file:/D:/jdevj2ee1013/jdev/system/oracle.j2ee.10.1.3.3.51/oc4j-config/applications/admin_ejb.jar, Compile error: Syntax error in source or compilation failed
    04/12/04 21:48:31 done.
    04/12/04 21:48:31 Error initializing server: Error initializing ejb-module; Exception Compile error: Syntax error in source or compilation failed
    04/12/04 21:48:32 Fatal error: server exiting
    And i found all the buttons in this version 10.1.3 that show chinese are all [][][][][]........
    after these annoying errors ,I cant use it at all.Maybe I should wait for the production version.

  • Is the version of Camera Raw 6.4 currently available compatible with CS4?

    I have Photoshop CS4, and have tried downloading the version of Camera Raw 6.4, but it won't install.  I'm guessing it is compatible only with CS5.  Is that correct, and if so, will it be available as an update for CS4 sometime in the future?

    The best thing would be to upgrade to CS5 if you can afford it and it runs on your computer or maybe get Lightroom which upgrades for cheaper but has the same adjustments, but the same controls are available for DNGs as ORFs in ACR but you trade backward compatibility in Adobe products for not being able to open the DNG in Olympus-only products, which you may or may not care about in the future.  You can decide to embed the original RAW data into the DNG which makes it about twice as big and this allows you to extract the ORF later with the DNG converter if you want to work on a particular ORF is some different software.  Of course decades from now, there may not be a DNG converter to extract the data with, and saving a distinct ORF would give more flexibility if you care about such things.

  • ADVANCED DEVELOPER CONFERENCE LAB NOW AVAILABLE

    The entire Advanced Developer Conference lab, complete with full source, is now available on the DeveloperCenterSamples page.
    The lab is a complete application for a fictional company, Remedy Pharmaceuticals. It includes clear and commented code in Java and .NET for:
    Basic portlet developmentAdaptive portlet development utilizing inter-portlet communication and in-place refreshPlumtree Event Interface (PEI) implementationsPluggable NavigationBranding and personalization without codingAuthentication Web ServicesCrawler Web ServicesProfile Web ServicesSearch Web Servicesand more ...All in the context of a single application.
    ross

    Tony,
    I "think" the easiest way to get PDF output at a cheap price is going to be PL/PDF (http://plpdf.com). It looks like it costs $500, and I don't see any other software requirements, since it works with mod_plsql.
    The coccon and other "stuff" is free, but I don't know how difficult it is to get setup and running. I'm also not sure how much leeway you get in designing your output.
    Since PL/PDF is generated by code you write with PL/SQL packages, I imagine that you can get some pretty customized output that would exactly fit your needs.
    When I first heard Apex 3.0 would allow PDF output, I was hoping that there was some kind of unannounced deal where Oracle had bought the company and was going to include the PL/PDF packages as some of their "standard" packages, like DBMS_OUTPUT.
    At least since they haven't done it yet, there may still be some hope that maybe someday they will, but then I don't see where that would really benefit the BI Publisher market, though I no idea how big that market is. It seems like quite a few Oracle shops aren't budgeted enough to get into that "niche", it's usually hard enough paying for the products already licensed.
    Bill Ferguson

  • Since latest upgrade I have 2 problems 1. fast dial didn't work, but has been fixed with changing the version. This happened before. Now the big problem is when I attempt to upload pics Facebook or attach documents to e-mail firefox crashes. HELP!

    tried several suggestions. Nothing works

    Create a new profile as a test to check if your current profile is causing the problems. See Basic Troubleshooting: Make a new profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See also http://kb.mozillazine.org/Firefox_crashes

  • Development Configuration import Problem

    Hi,
    I have 2 development configurations for my project : one ; development and two ; maintanance. I did developments on development configuration and now I want to sync my maintanance configuration with the developments done in the development configuration. I need ot import the Maintanance configuration in NWDS. I am nor able to import it. The error displayed is
    java.lang.IllegalArgumentException: Client VVD_ICICIMNT_D (1): absoluteLocalRoot (='C:\Documents and Settings\283818\.dtc\1\') is already used by another client.
    VVD_ICICIMNT_D (1) is the maintanance development configuration I want to import in NWDS.
    one strange thing : along with the name of the Configuration there is "1" written in bracket VVD_ICICIMNT_D (1) . wht is that for ?
    Regards
    Mrinalini Sharma

    Hi Mrinalini,
    If you are using the 2 NWDI Server in one NWDS. then please refer to below document.
    1NWDS + 2 NWDI Server
    But it didn't help me, I have checked with workaround for this, Create two folder namely 'development' and 'maintanance' in account under "Documents and Settings".
    Suppose you are workiing in development configuration and want to work on maintanance configuration then you need pur .DTR and .DTC folder in development folder.
    AND same if you want to work again in development configuration then you need to put .DTR and .DTC folder in maintanance folder and copy and paste .DTR and .DTC folder from development folder to your account/userid
    Hope it will helps
    Regards
    Arun

  • How to delete Development Configuration entries

    I have used document "How To... Setup CM Services" to configure NWDI with CTS+ for a Portal environment.
    My STMS configuration in the CTS+ server looks like this:
    EPU -> EPD -> EPQ -> EPP
    EPU = Upload System
    EPD = Development
    EPQ = Quality
    EPP = Production
    Everything was going ok but by mistake I created the upload system in the CTS+ environment with the option "Create development configuration" and this generated an entry in the Development Configuration of the NWDI which I am not able to erase because the delete option is not active. I have tried to fix it by deleting the system EPU in the STMS of my CTS+ server but even though I no longer see the system in STMS I still see it in the NWDI.
    How can I delete Development Configuration entries? Any help will be appreciated.
    Regards,
    Ayax
    Edited by: Ayax Morales S?chez on Sep 8, 2010 12:28 AM

    Hi,
    For the sake of completeness;
    Solution: Direct call to Web Service using the Web Service Navigator:
    1)     Call http(s)://<host>:<port>/wsnavigator
    2)     Click on u201CProvider Systemu201D, then u201CSearchu201D, then in the table u201CDIConfigurationServiceViu201D:
    3)     Click on u201CNextu201D, then u201CdeleteDISystemu201D
    4)     Click on u201CNextu201D, then remove all u201CSkipu201D ticks,  set certificate to u201CanySimpleTypeu201D, u201Cpasswordu201D to the password of the system, u201Cuser Nameu201D to the user, u201CsystemIDu201D to the name of the development configuration:
    5)     Click on u201CNextu201D. The development configuration should now be gone.
    Thanks
    Kenny

  • The new 10.8.2 update is now...

    The new 10.8.2 update is now available through the App Store.

    Have you tried a direct download & Install?
    http://support.apple.com/kb/DL1611

  • Sneak Preview NetWeaver 04 now available!! -  now REALLY available

    I'm pleased to announce that the new Sneak Preview NetWeaver 04 is now available to download on SDN! The sneak preview will be available in four different editions. The first two editions focusing on Java development tools are available now. They are called, conveniently enough, "Java Edition" and "Slim Edition" (slim, as in smaller package with less memory consumption and a few less features).
    Java version is back online, sorry for the inconvenience! **
    Two more editions will be added to the Sneak Preview in the coming weeks, also conveniently named "ABAP Edition" for the ABAP development environment and the big "Full Edition" with additional SAP NetWeaver components to evaluate.
    So, need I say more? Why not check out the Sneak Preview yourself and try your hand at developing applications with SAP NetWeaver. Read these details before you decide which one you'd like to try (make sure you're logged in!):
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/downloads/evaluation software/sneak preview netweaver 04.htm
    While you're doing all this, let us know what you think! Join a discussion in this forum or start your own discussions, post questions, help others with their questions if you can. Your feedback on this sneak preview will help improve the quality of the final product!
    Thanks for reading - now go download!
    Kathy Meyers
    SDN Community Manager
    Message was edited by: Kathleen Meyers re: availability of Java edition and added link to download page

    Could be one of a few things.
    1. We had to take the "Java" edition offline temporarily. It should be back up later today. IF you tried to access it, this might be why you cannot download.
    2. If you are having a general problem accessing our FTP server for downloads, perhaps you can check whether your (company) firewall allows FTP access. If it does not, perhaps you can see whether you can change your firewall to allow for the SAP.com domain. See: Can't download, Company firewall accept NO FTP access
    3. Also, during times of high traffic, it may be difficult to download the larger files we offer as the FTP server has a limit to number of parallel sesions. You might try to download during a different time of day.
    If none of these apply, please explain in more detail why you cannot download.
    Thanks,
    Kathy Meyers, SDN

  • Xcelsius 2008 SP3 is now available

    Xcelsius 2008 SP3 Release Notes UPDATED Feb 2010
    Just in time for the holidays!
    Xcelsius 2008 SP3 is now available from Service Marketplace and the support download site: SAP Crystal Solutions Downloads
    We hope you enjoy the great new features we have added. For details check out our Whatu2019s New document and these blogs:
    u2022     http://everythingxcelsius.com/2009/12/top-10-xcelsius-2008-sp3-enhancements.html
    u2022     http://timoelliott.com/blog/2009/12/what%E2%80%99s-new-in-sap-businessobjects-xcelsius-2008-sp3.html
    Make sure you download the self extracting file and run it from your hard drive.
    Please be patient when you run the self extracting file as it silently extracts all of the necessary files and then automatically runs the Xcelsius 2008 SP3 installer which can take a few minutes. The install files are extracted to the C:Temp folder along with the other CD files including: documentation, connectivity and portal integration kits.
    SP3 is cumulative patch so incorporates all the patches to-date and delivers new fixes and features, therefore Xcelsius 2008 SP1 and SP2 are no longer available. Customers looking for fixes shipped with SP1 or SP2 should download and install SP3.
    Note: The Enterprise patch is for all versions of Xcelsius 2008 except Xcelsius 2008 Present which has its own patch
    The documentation is available from the SAP help portal. You can search for the Xcelsius guides here: http://help.sap.com/businessobject/product_guides/ and they include:
    u2022     What's Fixed in Xcelsius 2008 Service Pack 3
    u2022     What's New in Xcelsius 2008 Service Pack 3
    u2022     Xcelsius 2008 Installation Guide
    u2022     Xcelsius 2008 SP3 Release Notes    UPDATED Feb 2010
    u2022     Xcelsius 2008 SP3 User Guide
    u2022     Xcelsius 2008 SP3  Supported Platforms: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50fdb3d2-50cc-2c10-e392-a2e481f71694?quicklink=index&overridelayout=true
    Regards
    The Xcelsius Team
    Please also see the Xcelsius Product Portal: https://www.sdn.sap.com/irj/sdn/crystalreports-xcelsius
    Before posting on this forum please refer to the Xcelsius Forum Rules of Engagement: Welcome to the Xcelsius forum & Rules of Engagement

    Hi,
    when will IE8 be supprted with Xcelsuis 2008? I am having the problem that no new Connections (e.g. QaaWS) can be created... Thanks for a quick answer.
    Best regards,
    Simon.

  • 10.1.0.3 Patchset Now Available

    The 10.1.0.3 patchset is now available on Metalink for Microsoft Windows and Intel Linux. From a brief glance at the rest of the platforms it doesn't appear to be out yet for the Unix platforms.
    Can anyone from Oracle let us know if there's any changed/improved functionality from an OLAP point of view with the 10.1.0.3 patchset? One thing I do know is that Discoverer Plus OLAP (aka Drake) requires 10.1.0.3, but is there anything else in the patch that should interest us?
    thanks
    Mark

    A few comments...
    1) I urge all OLAP 10g users to apply the OLAP 10.1.0.3.0A patch (PS# 3769360) to their 10.1.0.3.0 databases. Do not run OLAP without it. Currently the patch is only available on Windows. Linux and HP-UX should be available soon.
    2) Be sure to patch both the Oracle Database Server and Client with the RDBMS 10.1.0.3.0 and OLAP 10.1.0.3.0A patches. Analytic Workspace Manager is found on the Client. So if you fail patching AWM, it will become out of sync with the Server and will not work.
    3) Any new functionality with AWM 10.1.0.3.0A? Users are no longer required to manually enable the analytic workspace for query by the OLAP API. Dynamic enablement automatically creates compatible SQL views over the analytic workspace even if you change the logical model.
    4) Does AWM 10.1.0.3.0A use AWXML? Yes, however only for the query access. The building processing has not changed. With the upcoming 'AWM2' (10.1.0.3.0B), this will completely change over to AWXML.
    AWM2 will allow you to go directly from Oracle relational source tables or views to a multidimensional analytic workspace, without the previous prerequisites of creating ROLAP objects. Simply define and alter the logical model within AWM2 and see your results instantaneously. Easily create calculated measures with sophisticated, custom aggregations, etc...
    Currently the OLAP 10.1.0.3.0B patch and corresponding AWM2 has a GA of September 30th.
    5) Will the OLAP 10g docs be updated for 10.1.0.3.0/10.1.0.3.0A/10.1.0.3.0B? Yes, the Javadoc for the OLAP API and AWXML has been updated for 10.1.0.3.0. The OLAP DML Guide is being be re-edited and should be available within a week. The OLAP Reference and App Developer's Guide are being overhauled for 10.1.0.3.0A and will be available by the end of the month. Then again for 10.1.0.3.0B, the App Developer's Guide will be updated.

  • Oracle Portal 3.0.8 Documentation Now Available

    The Portal 3.0.8 Documentation is now available in its entirety from OTN. Go
    to the following location and click the
    Documentation tab:
    http://otn.oracle.com/products/iportal/
    Please also take a moment to fill out the following survey and let us know how you
    feel about the current Portal documentation set so that we can try to improve it in
    our upcoming releases. Thanks,
    Frank Rovitto
    Documentation Manager, Oracle Portal
    1. Please rate the following pieces of documentation on a scale of 1 to 5 (1
    being that you find it very useful and
    5 being that you don't find it useful at
    all).
    Quick Tour
    Configuration Guide
    Using the PL/SQL Gateway Guide
    Upgrade Documentation
    Tutorial
    Building Portals Manual
    Task Help (i.e., procedural, conceptual,
    and reference help provided in the main
    online help system, accessed by clicking
    the large question mark icon)
    Field-level Help (i.e., help that describes
    each field on a particular page, accessed
    by clicking the small question mark icon)
    2. For those items that you do not find
    useful would you suggest doing away with them
    altogether or enhancing them in some way? If
    the latter, what changes would you make?
    3. How do you search for information in the
    documentation? How successful are those
    searches?
    4. What are your top three documentation enhancement requests?
    null

    Now - part of Oracle9iAS v1.0.2.1!
    Download at (Solaris): http://technet.oracle.com/software/products/ias/htdocs/listing.htm
    Purchase at:
    OracleStore Solaris and HP-UX.

  • Xcelsius 2008 Fix Pack 3.5 (FP3.5) is now available

    Xcelsius 2008 Fix Pack 3.5 (FP3.5) supports Windows 7, see notes section below
    (Fix Pack 3.3 was the first version for Windows 7)
    It is now available from Service Marketplace and the support download site: SAP Crystal Solutions Downloads
    This Fix Pack must be applied to Xcelsius 2008 SP3 (version: 5.3.0.0) or FP3.1, FP3.2, FP3.3 or FP3.4: See: Xcelsius 2008 SP3 is now available
    u2022 The Xcelsius Present 2008 Fix Pack 3.5 patch is for Xcelsius 2008 SP3 Present only.
    u2022 The Xcelsius Enterprise 2008 Fix Pack 3.5 patch is both for Xcelsius 2008 SP3 Engage and Enterprise.
    Make sure you download the self extracting file and run it from your hard drive.
    When you run the self extracting file it asks you where to extract the files to and then extracts all of the necessary files. There can be a few minutes delay between extracting the files and the installer window displaying so please be patient.
    After you have applied the Fix Pack the version number in the about box will be version: 5.3.5.0
    The documentation can be found on the SAP help portal. You can search for the Xcelsius guides here: http://help.sap.com/businessobject/product_guides/ including:
    u2022 What's Fixed in Xcelsius 2008 Fix Pack 3.5
    u2022 Xcelsius 2008 Fix Pack 3.5 Release Notes
    There is a post on this forum for the supported platforms, see: Xcelsius 2008 Supported Platforms
    Regards
    The Xcelsius Team
    Notes for installing and using Xcelsius 2008 on Windows 7 or Windows Vista
    Support for Windows 7
    Xcelsius 2008 Fix Pack 3.5 (FP3.5) supports Windows 7 (Fix Pack 3.3 was the first version for Windows 7).
    Installation on Windows 7 or Vista
    When you install an Xcelsius 2008 Service Pack or an Xcelsius 2008 Fix Pack run the installer as an administrator:
    To do that right-click on setup.exe and select Run as administrator.
    You will be asked if you want the setup program to make changes to your computer, select Yes.
    When the installer finishes if you get the following warning This program may not have installed correctly then select Reinstall using recommended settings and the installer will run again.
    Turn off User Account Control on Windows Vista
    On Windows Vista only you must turn off User Account Control.
    If you do not then the Add-On Manager and Export to AIR menu items will be disabled:
    Go to START > Control Panel > User Accounts > Turn User Account Control on or off
    How to run Xcelsius 2008 as an administrator (see below for when to run as an administrator):
    Every time (recommended):
    Go to START > All Programs > Xcelsius and right-click on Xcelsius 2008 and select Properties. In the Compatibility tab under Privilege Level select Run this program as an administrator
    One time only:
    Go to START > All Programs > Xcelsius and right-click on Xcelsius 2008 and select Run as administrator.
    When to run Xcelsius 2008 as an administrator:
    Before you try to set or change the Xcelsius 2008 license key.
    If you do not the license key will not be updated or you may get a message saying that the license key is invalid.
    When you want to use the Add-on Manager to view add or remove add-ons (File > Manage Add-Ons).
    If you do not the Add-on Manager may crash or freeze.
    When you want to export to Adobe AIR
    If you do not then Export to AIR may crash or freeze.
    Please also see the SAP Crystal Solutions Support Portal: http://www.sdn.sap.com/irj/sdn/crystal-xcelsius-support
    Before posting on this forum please refer to the Xcelsius Forum Rules of Engagement: Welcome to the Xcelsius forum & Rules of Engagement

    Hi,
    when will IE8 be supprted with Xcelsuis 2008? I am having the problem that no new Connections (e.g. QaaWS) can be created... Thanks for a quick answer.
    Best regards,
    Simon.

  • Xcelsius 2008 Fix Pack 3.4 (FP3.4) is now available

    Xcelsius 2008 Fix Pack 3.4 (FP3.4) supports Windows 7, see notes section below
    (Fix Pack 3.3 was the first version for Windows 7)
    It is now available from Service Marketplace and the support download site: SAP Crystal Solutions Downloads
    This Fix Pack must be applied to Xcelsius 2008 SP3 (version: 5.3.0.0) or FP3.1, FP3.2 or FP3.3: See: Xcelsius 2008 SP3 is now available
    u2022 The Xcelsius Present 2008 Fix Pack 3.4 patch is for Xcelsius 2008 SP3 Present only.
    u2022 The Xcelsius Enterprise 2008 Fix Pack 3.4 patch is both for Xcelsius 2008 SP3 Engage and Enterprise.
    Make sure you download the self extracting file and run it from your hard drive.
    When you run the self extracting file it asks you where to extract the files to and then extracts all of the necessary files. There can be a few minutes delay between extracting the files and the installer window displaying so please be patient.
    After you have applied the Fix Pack the version number in the about box will be version: 5.3.4.0
    The documentation can be found on the SAP help portal. You can search for the Xcelsius guides here: http://help.sap.com/businessobject/product_guides/ including:
    u2022 What's Fixed in Xcelsius 2008 Fix Pack 3.4
    u2022 Xcelsius 2008 Fix Pack 3.4 Release Notes
    There is a post on this forum for the supported platforms, see: Xcelsius 2008 Supported Platforms
    Regards
    The Xcelsius Team
    Notes for installing and using Xcelsius 2008 on Windows 7 or Windows Vista
    Support for Windows 7
    Xcelsius 2008 Fix Pack 3.4 (FP3.4) supports Windows 7 (Fix Pack 3.3 was the first version for Windows 7).
    Installation on Windows 7 or Vista
    When you install an Xcelsius 2008 Service Pack or an Xcelsius 2008 Fix Pack run the installer as an administrator:
    To do that right-click on setup.exe and select Run as administrator.
    You will be asked if you want the setup program to make changes to your computer, select Yes.
    When the installer finishes if you get the following warning This program may not have installed correctly then select Reinstall using recommended settings and the installer will run again.
    Turn off User Account Control on Windows Vista
    On Windows Vista only you must turn off User Account Control.
    If you do not then the Add-On Manager and Export to AIR menu items will be disabled:
    Go to START > Control Panel > User Accounts > Turn User Account Control on or off
    How to run Xcelsius 2008 as an administrator (see below for when to run as an administrator):
    Every time (recommended):
    Go to START > All Programs > Xcelsius and right-click on Xcelsius 2008 and select Properties. In the Compatibility tab under Privilege Level select Run this program as an administrator
    One time only:
    Go to START > All Programs > Xcelsius and right-click on Xcelsius 2008 and select Run as administrator.
    When to run Xcelsius 2008 as an administrator:
    Before you try to set or change the Xcelsius 2008 license key.
    If you do not the license key will not be updated or you may get a message saying that the license key is invalid.
    When you want to use the Add-on Manager to view add or remove add-ons (File > Manage Add-Ons).
    If you do not the Add-on Manager may crash or freeze.
    When you want to export to Adobe AIR
    If you do not then Export to AIR may crash or freeze.
    Please also see the Xcelsius Product Portal: https://www.sdn.sap.com/irj/sdn/crystalreports-xcelsius
    Before posting on this forum please refer to the Xcelsius Forum Rules of Engagement: Welcome to the Xcelsius forum & Rules of Engagement

    Hi,
    when will IE8 be supprted with Xcelsuis 2008? I am having the problem that no new Connections (e.g. QaaWS) can be created... Thanks for a quick answer.
    Best regards,
    Simon.

Maybe you are looking for