The version of "Adobe Flash Player" on your system does not include the latest security updates and has been blocked. To continue using "Adobe Flash Player", download an updated version from Adobe's website.
The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.
You haven't actually asked a question, but as stated you should only download Flash Player directy from Adobe.
Nor have you said what version of OS X and Safari you are running.
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3 or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
Similar Messages
-
When I try to watch any video clip I get this:
The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.
I tried clicking on the Adobe Flash Player. It said it accepted it but it did not make a difference.
Can anyone help?
Thank you!This did not work
On Mon, Oct 27, 2014 at 8:59 PM, Apple Support Communities Updates < -
Your system does not meet the minimum requirement for this update (9996)
Hi
recently had to reformat my system with windows 7 profesional. All windows updates where performed and all the drivers where installed correctly except the ethernet driver. windows 7 cannot find a suitable driver. I then downloaded the driver from the link provided on the hpe-590t download site, which is described as a intel gigabyte driver sp52222, however the software driver comes up with the following message your system does not meet the minimum requirement for this update (9996). Has anyone had a similar problem.
Hardware Ids are:
PCI\VEN_8086&DEV_0000&SUBSYS_00008086&REV_00
PCI\VEN_8086&DEV_0000&SUBSYS_00008086
PCI\VEN_8086&DEV_0000&CC_020000
PCI\VEN_8086&DEV_0000&CC_0200
Regards artieI solicited the the assistance of another one of our experts who is a driver guru, you may see his reply here:
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Paul-Tikkanen/m-p/4990422#M...
I tend to agree that either the NIC is bad or possiblly a factory restore would help.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations. -
'We apologize for this inconvenience; however, your system does not meet the requirements necessary to view our media presentation'. I just received the iPad mini and get this message when I try to view videos. Does the full size iPad support video play back?
iPads have the same video requirements. What is the source of the video - streaming, download, from video camera?
Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Cheers, Tom -
Netflix requires Microsoft Silverlight plug in to view their videos. Every time I try to load it I get the following error message...Your operating system does not support the 64-bit version of Silverlight. I have a 64bit system with Windows Vista Home Premium. Firefox 33.0 is installed.
Any suggestions?Your User Agent: Mozilla/5.0 (Windows NT 6.0; '''WOW64'''; rv:33.0) Gecko/20100101 Firefox/33.0
As said Firefox for Windows from mozilla.org is a 32-bit application. The WOW64 in UA means it is a 32-bit application on 64-bit Windows.
Before you ask if there will be a Win64 version of Firefox. If all goes well the first phase of having Win64 for Release may be as early as Firefox 37.0
https://wiki.mozilla.org/Firefox/win64 -
You are not allowed to continue because your account does not have the proper privileges
I've been using PS since version 3. I currently run CS2 on Windows XP service pack 2. I've been using CS2 since it was first released. Now, all of a sudden, anytime I install or uninstall a program, whether it is related to Photoshop or not, when I start CS2 I get a window that says "You are not allowed to continue because your account does not have the proper privileges" and the program aborts. The first time this happened and after I had restarted CS2 for the 4th time it started normally. Since then it requires at least one restart (not reboot)after the error and then CS2 starts normally. Anyone have any idea of what is going on here? The first time it happened was right after I had installed a new HP AIO printer and I thought that may have had something to do with it. However, I have installed a couple of other programs and uninstalled another, none of them related in any way to CS2, and I get the error the next time I run CS2. I have found some posts about this but no answers, and most of the posts were related to Vista, not XP. I need help please.
there's a section in adobe.com (not adobeforums.com!) where after you log in (seperate log in from this site) you can go to "my account" and then "my registrations". you can manually add registrations there. that's how i've registered most of my adobe purchases.
ok. just ran through it:
go to http://www.adobe.com/ (make sure you have flash turned on)
click "Your Account" in the upper left corner.
log in with your adobe.com id, create one if you don't have one. this is SEPERATE from the id you log into this forum with!
click on "View Product Registrations"
click on "View Adobe branded products registrations"
if you have any registed packages, they'll be listed. at the bottom of the page click on the button that looks like this: -
My videos arent playing on my safari and it says "blocked plug in". I go to download an updated version of flash but it doesnt help, and It keeps saying it over and over. I also cannot log in to previous webpages. Cookies are enables and so are pop ups
Uninstall the old Flash plugin versions > Troubleshoot Flash Player | Mac OS
And turn OFF Extensions in Sarfari > Prerferences > Extensions. Quit and relaunch Safari to test.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari. -
SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash
If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
"SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally. Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
Below is a SOLUTION (WORKING) !
Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
1) "HP Software Framework"
2) "HP Service" [no typo - a real plain name]
If not running, set Properties-->Manual and click "Start", make sure both are running.
Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
Should work from within Windows environment.
Notes:
a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
b) After done, don't forget:
*) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
**) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled. The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
BUT nobody is requiring you to disable anything though.
The solution merely states the fact:
These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
Simply restartung them solves your problem. Usually
Ya'll have a good day and enjoy!
===========
BELOW ARE IMPORTANT WARNINGS:
1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER. DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware. In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
===
Stan M. Starinski, MSEE.Hello Ceramics.
Your ProBook is an Enterprise model. It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product. Here is a link.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue. -
I have a Curve 8300. With OS v4.5.0.81. And I am on a BB Social network plan through my cell providor "Fido".
I mainly use it for Facebook & Twitter and have no problems using either app. However I was prompted for an update for my twitter recently but wasn't near a wifi spot to update. Just decided to update today at home where I do have wifi. However when I go to do the update, it gives me the following error:
"Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"
I have scoured for answers but haven't had much luck. I tried checking for OS updates. I apparently have the most current one that my phone will support. I uninstalled twitter and then tried to reinstall it via the twitter Icon on my phone. Got the same error. Tried reinstalling it through app world, it installed just fine. However it installed the version that I had previously had. So I went to twitter's settings and checked for updates. It prompted for one as I expected it would. And when I tried to get the update. It gave me that error again. I can use twitter as it is, but I don't see why my phone shouldn't be able to get all the updates for various apps. Is it a software compatability issue? Is it a hardware compatability issue? Is there anything I can do to get the update or do I just have a phone that won't take some app updates?Hi and welcome to the forums!
The 8300 is not listed in the device upgrade table for Blackberry device OS v5.0. The newer versions of apps like Twitter and Facebook require device OS v5.0 to run correctly. Might be time to consider a new device!
Thanks,
Bifocals
BlackBerry Device Software 5.0 main support page
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
"Your computer does not have the hardware to run this software"
When I try to install Final Cut Studio, I receive the error "your computer does not have the hardware to run this software." I just purchased a brand new 13in macbook pro with 4gb of ram about 2 weeks ago. This computer is more then capable of running this software so what's the problem? How do I fix it? I just recently boot camped windows 7 on this thing just in case that matters somehow. Feedback? Comments? appreciate it...
final cut studio 5 I believe
There is no Final Cut Studio 5 (yet). The current version is Final Cut Studio 3, which includes Final Cut Pro 7. Final Cut Pro 5 is NOT compatible with IntelMacs. Version 5.1 was the first version to be compatible with IntelMacs.
-DH -
Rejected...We found that your app does not follow the iOS Data Storage Guidelines,
Where and how do I fix this?
We found that your app does not follow the iOS Data Storage Guidelines, which is required per the App Store Review Guidelines.
In particular, we found that on launch and/or content download, your app stores 3.54MB. To check how much data your app is storing:
- Install and launch your app
- Go to Settings > iCloud > Storage & Backup > Manage Storage
- If necessary, tap "Show all apps"
- Check your app's storage
The iOS Data Storage Guidelines indicate that only content that the user creates using your app, e.g., documents, new files, edits, etc., should be backed up by iCloud.
Temporary files used by your app should only be stored in the /tmp directory; please remember to delete the files stored in this location when the user exits the app.
Data that can be recreated but must persist for proper functioning of your app - or because customers expect it to be available for offline use - should be marked with the "do not back up" attribute. For NSURL objects, add the NSURLIsExcludedFromBackupKey attribute to prevent the corresponding file from being backed up. For CFURLRef objects, use the corresponding kCFURLIsExcludedFromBackupKey attribute.You're submitting a Newsstand app, right? This error is still under investigation, but the current workaround is create SD (1024x768/768x1024) cover images for your HD (2048x1536) folio renditions and try again.
More info here:
http://forums.adobe.com/message/4730637#4730637 -
I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!
Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Com.adobe.flashaccess.sdk.cert.ServerCredentialException: Certificate does not have the required ext
[ Problem ]
I’m running the sample encryption code and I’m running in to this exception:
"com.adobe.flashaccess.sdk.cert.ServerCredentialException: Certificate does not have the required extended key usage". I tried looking it up on javadocs but it doesn’t really tell me what’s causing it. I get this error when encryptContent is called. Is this something in my settings/environment or something with the certificates?
[ Solution ]
If you are using the EncryptContent.java sample code, please check which credential you are using for the "packagerCredentialFile" variable. Make sure this is pointing at the .pfx file containing the packager credential.[ Problem ]
I’m running the sample encryption code and I’m running in to this exception:
"com.adobe.flashaccess.sdk.cert.ServerCredentialException: Certificate does not have the required extended key usage". I tried looking it up on javadocs but it doesn’t really tell me what’s causing it. I get this error when encryptContent is called. Is this something in my settings/environment or something with the certificates?
[ Solution ]
If you are using the EncryptContent.java sample code, please check which credential you are using for the "packagerCredentialFile" variable. Make sure this is pointing at the .pfx file containing the packager credential. -
App World - Sorry, your device does not meet the system requirements that are needed
Hi, I’ve just got a blackberry which is my first. I am new to this. I'm trying to download the App World on my phone because I would like to get some applications on my phone. As I try to download the App World it says "Sorry, your device does not meet the system requirements that are needed to support Blackberry App World." I have tried to download this on my computer Via Cable and on my Blackberry Via the Browser. If this doesn’t work for my blackberry is there any way around this so I can download applications from somewhere else.
Network Provider: 02
Network Plan: Pay As You Go
Thanks.Hi, thanks. Is this something my provider can activate free of charge or does this come at a monthly payment?
Can someone provide a bit of information about this please.
Thanks. -
Hi My name is Tibor Madarasi i purchased a Blackberry 8900 brand new i can't install app world i instaled the updates for this phone (v4.2.0.85)still can install app world i receive the error "axError.gif Sorry, your device does not meet the system requirements that are needed to support BlackBerry App World." I'm using O2 network in London UK Please advice me Regards
Message Edited by MichelleK on 06-15-2009 09:53 AMffbizz wrote:
I hate this bold 9700 series 2 no carrier and find it to be a pathetic product backed up by even more pathetic support so I have decided to use it as a torch. There is an app for this but it requires app world first. Are you trying to say that I MUST have a carrier and they will resolve this issue but otherwise RIM cannot do anything about their own product?
Hello and Welcome to the Forums!
We are so sorry that you are having so many difficulties. While many experience the same (a search here will reveal that fact), there are also many who have very positive experiences with their BB. Not every device is suitable for everyone -- which IMHO is why there are so many choices.
In addition, but for AppWorld, front line support for BB's is, by contract, not provided by RIM. The carriers and authorized resellers are responsible for front line formal support to end users. It is possible to bypass your carrier and seek assistance direct from RIM, but such involves fees since you are bypassing your support agreement with your carrier. The "Support and Services" tab toward the top of these forum pages provide information about that. But, if you do go through your carrier for support, they can escalate into RIM at no fee to you if they so choose to.
As to AppWorld Support (beyond what we volunteer to provide in these forums), that is available via this portal:
https://www.blackberry.com/CSOHelp/index.do?ft=generic
If you choose to submit to them in this manner, then please use, in the "Please select a component:" field, the AppWorld Billing/Payment selection. Any other selection will simply route you back anonymously to these public forums.
As to your question, RIM and the carriers both participate in AppWorld. My suspicion is that the carriers get a portion of the costs for the apps that are vended via AppWorld -- but that's just my suspicion. Hence, the use of AppWorld indeed requires a carrier (and, indeed, the proper data plan level from them).
But, AppWorld is merely a portal, vending apps that are (for the most part) developed by others. As such, it is not the only portal in the world for BB apps. There are a few, I think, apps that are exclusively vended via AppWorld...but I think that number is rather small. Consequently, if you desire an app that will allow your BB to function as you desire, you should seek out alternative vending portals. There are plenty.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
How do I disable Game Center prompts in iOS 8.1?
Every time I go to open a game, Game centre loads up and it prompts me to sign up for an account. I don't want one! Any idea how to disable this? Thanks.
-
How to set the size of applet when invoking forms through formsserver
HI, I m using forms server to display my forms in browser, my problem is to change the size of applet at runtime so that the entire forms is displayed. right now the forms whose size is more r displayed with scrollbars. and thats giving me problem wi
-
Setting password to view source code.,,
How can I set password to restrict users from accessing or viewing my code..
-
Retrieve stock information to my flex application
Hey guys ive been thinking about building an application where i can query for a specific stock. I looked at yahoo finance and at google finance api. However they just dont seem to make any sense to me. So here is the question. Do you guys know of a
-
Is there any risk in buying a refurbished iPod?
Buying a refurb and saving about £60 seems too good to be true. Has anyone bought a refurbished iPod and is there any risk? Thanks for your help.