The VGA of my T61 stopped working

I used a Projector and an external vga with my T61 and it was good .
but when I triyed a gain it stoped to work .
- help me -
could the external VGA in the laptop is the problem

Hi,
the same problem appeared on my laptop recently. The monitor detected properly (name + possible resolutions), but
when i'm activate the dual screen setup, the external monitor won't come to live (it remains in suspended state).
The notebook  is almost 3 years old (the garantee is still on).
I've already tried to set bios option VGA+internal, but it didn't help.
Do You have any idea or i just check it in to service?
Thanks in advance!

Similar Messages

  • I tried to start my itunes and I recieved the message that itunes has stopped working what can I do to fix it?

    When I try to open up itunes I am getting the message that itunes has stopped working and then microsoft sends an error message to find a solution. What can I do to fix my itunes?

    First you can try;
    Try restarting PC and run itunes again!
    If error again than perform clean instal of itunes (uninstal first and than instal again)!

  • Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.

    Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.

    Why can't we use Acrobat Pro for mobile devices? Save a whole lot of headaches!!! Now I have to return this subscription.

  • HT3529 I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?

    I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?

    Read here:
    http://support.apple.com/kb/TS2755

  • TS1424 i cannot play my videos or shows on itunes any more. i get the message saying "windows can check online for a solution to the problem" " i tunes has stopped working"

    i cannot play my videos or shows on itunes any more. i get the message saying "windows can check online for a solution to the problem" " i tunes has stopped working"

    Hi marymike,
    The crash signature is simalr to that mentioned in the thread: https://forums.adobe.com/thread/644139
    Please try the suggested steps mentioned and check.
    Regards,
    Rave

  • I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

    I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

    Try updating the printer driver.

  • TS1424 When I try to watch a rented movie from ITUNES ver 11 on my WIN 7 64 bit PC...the movie starts then after about 30 seconds I receive the following error "Itunes has stopped working"

    I downloaded and rented a movie from ITUNES ver 11. I'm able to run the movie but after about 30 seconds I receive an error.
    "Itunes has stopped working" A problem cause the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    Windows offers me to down load ITUNES WIN 7 64 bit, I have uninstalled and reinstalled the 64 bit version...no joy... I have run the repair option and still nothing.. Any suggestions???
    Regards, Steve Tipton

    I'm expreriencing the same conditions with the same environment.  Windows 8, iTunes-64 11.1.2.32, iTunes Store with a processing bar up to 80 +/- and the POPUP MESSAGE OF "iTunes stopped working. The error ...."
    I UNINSTALLED, iTUNES WITH NO POSITIVE RESULT.  I CHECKED THE FIREWALL AND IS THE SAME DEFINITION AS THE PREVIOUS ITUNES VERSION.
    My iTunes StoreS from my iPhones ARE OK.
    I'm spending a lot of time of research for WINDOW'S iTUNE with no solutions.... 

  • ITunes keeps shutting down when I open it up.  The message says iTunes has stopped working.  A problem has caused the program to stop working correctly.  Windows will close the program and notify you if a solutions is found.

    iTunes keeps shutting down when I open it up.  The message says iTunes has stopped working.  A problem has caused the program to stop working correctly.  Windows will close the program and notify you if a solutions is found.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried something like the above then try opening iTunes in safe mode (press and hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud Purchases. You may find that iTunes opens normally now.
    tt2

  • A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  WHen we plugged it into the port on the keyboard, the device works. Why?

    A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  When we plugged it into the port on the keyboard, the device works. Why?  Obviously the device is operational.  Could the USB port have burned out from having too much power drawn?  If so, is it reparable?

    It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
    That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

  • ITunes stops working.  The message says iTunes has stopped working due a problem to the program.  How do I find a solution?

    iTunes stops working.  The message says iTunes has stopped working due a problem to the program.  How do I find a solution?

    Hey there Warrior41,
    it sounds like you are unable to use iTunes because it either will not launch without this error, or you get the error when you are using it. Sorry to hear about that, that can be pretty aggravating. I would use the troubleshooting in the following article to help resolve the issue, named:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Start with opening iTunes in Safe Mode and see if the issue persists. If not, the article will help you troubleshoot for 3rd party plugins that may be causing it:
    Start iTunes in Safe Mode
    Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
    Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    Click Continue.
    See if the issue you're experiencing persists in Safe Mode.
    If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
    If that doesn't resolve the issue there are additional steps in the article if needed.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • I have uninstalled and reinstalled the most current edition of Adobe Reader, including the patch. When I open a PDF file, the screen is first grey, then viewable, but the message "Adobe Reader has stopped working" comes up. How do I remedy this?

    I have uninstalled and reinstalled the most current edition of Adobe Reader (11.9), including the patch. When I open a PDF file, the screen is first grey, then viewable, but then the message "Adobe Reader has stopped working" comes up. How do I remedy this?

    RR,
    One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
    Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
    http://www.recoverytoolbox.com/buy_illustrator.html
    and another similar website,
    http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
    As far as I remember, the former is for Win and the latter for Mac.
    Here are a few pages about struggling with it yourself:
    http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
    http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
    http://kb2.adobe.com/cps/500/cpsid_50032.html
    http://kb2.adobe.com/cps/500/cpsid_50031.html
    http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
    Failing a full recovery, hopefully you have one or more earlier versions and/or bits of artwork saved before it happened.

  • The App Store search has stopped working since I updated to 8.2 on iPad

    Hi
    since I updated my software to 8.2 on my iPad the App Store search has stopped working but other features work on the App Store only the search option is not responding and says " the App Store is temporary unavailable please try again later "
    I have turned my iPad off and on couple of times but with the same result each time.
    the 8.2 update is for the new Apple watch and health app.
    can any one help?

    Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
    Do not change your settings.
    Edit

  • Suddenly in the middle of editing a large project the cropping and other tools stopped working. Did i hit some key or something accidently?

    suddenly in the middle of editing a large project in Aperture the cropping and others tools stopped working. Did I accidently hit something to do that?

    Maybe you hit the "p" key?
    Then "Quick Preview" will be turned on and prevent editing. Hit "p" again or use the "View" ->"Quick Preview" menu entry.

  • I uploaded the newest version and itunes stopped working!

    I uploaded the newest version and itunes stopped working!  This on my windows computer at home, can anyone help?  Sorry,  by not working I mean I click on the icon and itunes starts up - shows me the library screen with all my music on it, says accessing account and then pops up a message saying it has encountered a problem and needs to close.  When I say ok, it closes and goes away!

    This is CoconutDonuts solution and it worked for me
    May 17, 2014 2:44 AM (in response to Kittyinaz)
    Just fixed this issue for iTunes for Windows with minimal damage, try:
    1. Browse to "C:\Users\<YourUserName>\AppData\Roaming" in Windows Explorer.
    2. Rename the "Apple Computer" folder to "Apple Computer-old".
    3. Start iTunes
    4. Close iTunes
    5. Copy the file "iTunesPrefs.xml" from "C:\Users\<YourUserName>\AppData\Roaming\Apple Computer-old\iTunes"
    6. Paste the old "iTunesPrefs.xml" into the new "Apple Computer\iTunes" folder iTunes just created (not the one you renamed) under "C:\Users\<YourUserName>\AppData\Roaming\Apple Computer-old\iTunes"
    7. Overwrite the new iTunesPrefs.xml with your old copy of the file.
    If you don't care about losing your iTunes preferences then you can just do step 2. You can always go back and grab things from the old folder later if you realize you wanted to have your EQ settings, individual track gains, etc...
    THIS WORKED FOR ME

  • Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?

    Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?

    There is an explanation in the following link in the section "What's new in version 3.0.09440" that there was a problem with the update. It's available again now. https://itunes.apple.com/us/app/cisco-anyconnect/id392790924?mt=8

Maybe you are looking for