The video file jumping to the start point.

Hello, Is anyone know why the video file, when he get to the end he is jumping to the start point, And Is there any way to prevent this?
thanks a lot
anat/

Hi Anat,
Can you please confirm complete version of Adobe Captivate (Help > About Adobe Captivate).
How have you inserted the video? multi slide synchronized video or event video?
Is it jumpiing to the start point of the video or the start of your project?
In which format have you published your output?
Thanks.

Similar Messages

When watching youtube the video randomly jumps to the start of the video even if the cursor is not on the video.

When watching youtube the video randomly jumps to the start of the video even if the cursor is not on the video. This happens randomly and does not seem to be a problem with the videos as they run fine. what is going on?

Several times every day YouTube shuts down some of their servers to update stuff. Be patient if YouTube is slow, stuck or mangled. Transmissions from YouTube to your computer are done in multiple tiny packets of data and flash at a time. That's why sometimes you may get any of these scenarios: bits and pieces of text/thumbnails in weird places; sluggish loading/buffering; the spinning circle going on forever; or the player being blank. This problem could fix itself within a few hours or by the next day.
If your YouTube continues to behave slow, stuck or strange, it's very possible that your directories of "temporary internet files" and RAM (sometimes known as "cache") are close to the maximum and just cannot take anymore, the end result being any of the above scenarios or videos that: A) come to a complete freeze; B) start/stop/start/stop in a choppy way; or C) never even make it onto your screen.
"Temporary internet files" are tiny bits of webpages that get permanently put on your hard-drive. They will remain forever on your computer, gradually plugging it up like hair stuck in a sink drain, until you finally get rid of them once and for all. Thus, exit out of YouTube, then clear your "cache" of all its "temporary internet files", "cookies" and "history". It is best if you shutdown and reboot afterwards. You'll be amazed at how "fresh" and "new" your YouTube will be.

Where are the video files?.

Forum,
I am very confused,not sure I have even entered the subject question correctly.
The MBP will not capture directly to external drive,a former post to the forum has advised me to purchase a firewire card.
Therefore I have captured to a partition on the internal drive.
No problems.
I then dragged the file from the internal partition to the external drive,a green cross appeared which I understand indicates the file has transfered to the external drive.
However when I examine space used on the external drive it is only 157Mb.
Clearly a 30 minute video uses 6 Gb.
I can see that information in the internal partition.
Now what I can not understand is when I choose the file in FCP to enter into the viewer it tells me it is offline.
Thinking it may be in the external drive,despite knowing that it can not be stored in 157 Mb.I start up the external drive.
Now the clips come to life and I can drag them into the viewer and proceed.
So, where is the 6Gb. file?
Why do I need to start up the external drive when the file is not there,or is it.
Some time ago Studio X advised me it is better to enter video files onto an external drive.
So I have taken his advice because he obviously knows what he is talking about.
Any way there is not space to store all my video files on the internal partition,the OS and applications take up 85 Gb. so that means 100Gb. allowing for 10% head room, only about 38 Gb. for video files.
The information I have entered about my kit is accurate.
If my post appears pedantic,forgive me,but so many posters are asked to clarify or give more information.
I hope I have supplied all information required.
Thank you
Michael Craven.

David,
Thank you for your reply.
Your information in paragraph 1 is noted with interest and added to my information book.
I have carried out the steps you suggested in paragraph 2.
157 Mb. is still shown.
When I open the file in Quick time, the following statement appears "The movie could not be opened,The file is not a movie file"
Well to press on I deleted all files from the internal drive partition named "video files" That partition is empty.
So,back to the iomega external drive.
Opened the file "Georgie and her kittens'.
FCP opens and shows the eight clips of that video.
Double click, select "show in the viewer" and they appear in the viewer.
Obviously the video files are on the external drive. I think.
I must have had doubts that a transfer of 6 Gb. from the internal drive to an external drive was so quick.
The iomega external drive shows "extended (journaled)"
In a later post reply Ken Summerall sugests "journaled' slows down information selection.
How do I remove " journaled"?
Should I pose that question in another post?
Thank you for your help.
Michael Craven.

How do I start a streaming .flv at a point other than the beginning of the video file?

I have a 1.5 hour flv video that is streaming from a
Microsoft 2003 box with Wowza Media Server installed. Using
Actionscript 3 and the FLVplayback component I would like to start
the video at a point about 10 seconds from the beginning.
This code snippet does not work:
myVideoFile.seek(10);
myVideoFile.play();
Though the video seeks to the proper point in the video file,
the play() call sends it back to the beginning. Thanks for your
help!

That's the ticket!
<totallyRocks>Jamesabth</totallyRocks>

My SD video keeps jumping between the upper and lower frames. So the video starts frame blending and blurring in and out.

My SD video keeps jumping between the upper and lower frames. So the video starts frame blending and blurring in and out. The sequence settings are set to
Editing Mode: DV NTSC 29.97 frames/second.
Pixel Aspect Ration: D1/DV NTSC (0.9091)
Fileds: Lower Field First
Display Format: 30fps Non-Drop-Frame Timecode
720 x480

What is the source of your video, and exactly what is inside your video?
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

I have a JVC GY-HM100U and when I try to get the video files (MP4 format) off of the the SD card I get the error message OSStatus error -12909...any thoughts?

I have a JVC GY-HM100U and when I try to get the video files (MP4 format) off of the the SD card I get the error message OSStatus error -12909...any thoughts?

To be more precise: You MUST shoot in mov. Then drag the Clip bins from the card to you hard drive. Then drag the clips to FCP timeline and FCP asks you if you want to change to the right codec and of course you say YES. Now you can start editing. Can not be more simple. This camera was specially designed for use with FCP.

Is there a limit to how big the video file can be, storage size or pixel size, when inserting in a powerpoint?

When I add a video file to a ppt file using adobe presenter 9 it will now work when it reaches that slide. the video will start but at about 30 seconds in it will tear to green. Sometimes it will return and sometimes it will just stop after that. When it comes back it will continue until about 40-45 seconds in then on a fade to black it will not play anymore. The slider will continue as if it is playing but no output is seen on the screen.
The video file in question is 165MB, 1920 x1080 pixels MP4
If I convert it to smaller, 65MB, 1080 x 608 MP4 file everything works with no issue.
Can anyone shed any light on this?
Things I have checked:
Adobe updated
Office Updated
Windows Updated
Drivers updated
64 bit consistency
Source file validation
Rebooted computer
Flash installed
Flash trust enabled

Do you notice a quality difference when playing the two videos in Presenter? I'm not a fan of HD video in Presenter, mainly because of the reduced screen real estate that is available for video. I find that around 720 X 480 usually works just fine, and keeps the file bloat down (as you have seen just in your change you lost 100 MB). I don't believe there is a limitation on what you can place in Presenter, but it may be a matter of what can be delivered effectively. There may also be something odd in the encoding of the 1080 version of your video. If you re-encode it at the same resolution, with the settings of the lesser resolution video, does it play back as expected?

Which is the best software to convert the video files for itouch?

I got a 3rd gen itouch. Is there any software that helps to convert the video files. so I can sync those files to my itouch. " Handbrake " used to work pretty good. but now i still can convert the video files to m4v format but itunes doesn't allow me to put those files in. Please Help!

You may have different menu options than Half bit Bit Ah. The support page on how to do it is at https://support.apple.com/kb/TS1497. In part it says:
If you did not purchase videos from the iTunes Store, they are may not be in a format that you can play on your iPhone/iPod. In many cases, you can convert them to the correct format using iTunes or QuickTime.
* Using iTunes: Select a video and choose Advanced > Create iPod or iPhone Version
* Using Mac OS X v10.6: Open the video in QuickTime Player and choose Share > iTunes and then select the iPhone & iPod option.
Hope that helps!

In list view, duplicating a file causes the finder to jump to the top

I'm working on an iMac with Lion, connected to files on a Mac server and working in list view with a number of sub-folders expanded. When I duplicate a file, the list view jumps all the way to the top of the first folder. I then have to scroll back down to find where I was. Any suggestions?

Hi,
I'm having the same problems in IE.
I've also changed the ChangeEventPolicy property on the iterator from "ppr" to "none".
And changed the content delivery property of the table to "immediate".
Still I have the same behaviour in IE.
In Firefox I don't have this problem.
Anyone any suggestions?
(I'm using JDeveloper 11.1.1.4.0).
Thanks.
N. Gabriël

I have a video that I created for my daughter's first birthday. The hard drive on my computer crashed and I lost the video file. The only place I have it is on my iPod Classic. How can I transfer the video from my iPod to my new hard drive?

I have a video that I created for my daughter's first birthday. The hard drive on my computer crashed and I lost the video file. The only place I have it is on my iPod Classic. How can I transfer the video from my iPod to my new hard drive?

You are in luck, Refer to this recent post by tt2, on recovering media using 3rd Party Software.
He has made a comprehensive list, browse through them and decide which suits your requirements.
Have a nice day!

I just updated to Adobe Reader 11.0.07 on my Mac 10.6.8 and now the video files don't work. How do I uninstall the update and return to the previous version?

I just updated to Adobe Reader 11.0.07 on my Mac OS version 10.6.8 and now the video files don't work. How do I uninstall the update and return to the previous version?

I received a notice from Chris Campbell at Adobe that stated : "....we are aware that Macs created between 2006 and 2008 are currently running into problems using the latest release of Flash Player (version 13)." My question is will the update of Adobe Reader 11.0.07 cause this problem with Flash Player 13 on my Mac? Sometimes when I try to view streaming video I get sound but no video.
>

Where are the "exercise files" referenced in the video tutorial for After Effects?

Where are the "exercise files" referenced in the video tutorial for After Effects? A search yielded no results.

Creating your first project | Learn After Effects CC | Adobe TV

My quicktime is very jerky with 1080p video but when I play the video file in FCPX its smooth. I recently upgraded to OS mavericks on iMac with 16gb of ram and should not be having this problem. Is it possible to reinstall older software?

My quicktime is very jerky with 1080p video but when I play the video file in FCPX its smooth. I recently upgraded to OS mavericks on 2011 iMac with 16gb of ram and should not be having this problem. Is it possible to reinstall older software? I cant figure whats causing the jerky video so I'm assuming its the new OS. Any one have any suggestions?

I have the same but not the same problem. When I play a sound or a video on a website (other than youtube)on safari, a weird nois is comeing from the speakers, the sound has pops/clicks but if I play the same video/sound on mozilla it works fine.. If wnyone know what's the problem.. please let us know

I have a keynote presentation that i built a while ago. How do identify the file names of the video files that are in the presentation?

I have a keynote presentation that i built a while ago. How do i now identify the file names of the video files that are in the presentation?

With your presentation open, click on each movie element and read the name in the Metrics Inspector > File Info.

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option).

The video file jumping to the start point.

Similar Messages

Maybe you are looking for