The video tutorial window that shows when photoshop is launched is TOO SMALL. Can it be maximized??

The "Welcome" window that opens when PS CC 2014 is launched show the option to playa specific  vidieo tutorials. However, that window in not adjustable and is frequently too small to see exactly what the person is actually doing. Can the video be enlarged?
There are other secondary videos that can be watched in that same window. These other videos are really quite tiny, actually. I can't see at all what the person is doing. I think it would be nice to be able to enlarge the videos presented within the Welcome window that opens with PS CC 2014. Is anyone else having this problem??
Thanks,
Chick

I am aware of the above links; they do  not appear to contain the same, most recent videos containing the most recent updates that open in Photoshop  when Photoshop is updated, however.
I think having these videos discussing the most recent updates immediately available in Photoshop is more timely and convenient. but again, I wonder why the video window is so small. Why was that considered good form and even helpful?
Thank you.
Chick

Similar Messages

  • How to avoid the annoying little window that opens when I go to close a file?

    When I put my cursor near the x of a file tab to close a file, a little window opens over the x and I have to wait for it to dissappear before
    I can click on the x to close the file. The window that opens has the exact same text as the folder tab and seems worse than useless. Is there a way to turn it off?

    It should be real easy to install the latest ATI driver for the latest ATI mobility video card but that hasn't been the case with those with my computer. Computer stuff is never as easy for my as I think it should be. I'm probably and excellent candidate for Apple computers but I'm too cheap and old to switch.
    My computer is Alienware's (Dell bought Alienware a couple of years ago.) latest and biggest, m18x, and it holds two ATI 6970m GPU's. There is a real good forum of users of this computer and many have problems installing video card drivers. That is why I wanted to leave well enough alone but some say the latest drivers perform better in games so I gave it a try. My first try was installing Dells recommended latest driver for the video cards in my computer. They installed but my computer refused to use them and it hinted that it didn't like the signature. I tried for a while to get it to work but gave up and went to a site recommended by one of the users in the forum and it downloaded fine and is working.
    dt

  • How can I change the e-mail address that shows when I try to order from iBooks?

    Hi.  I recently had to change my e-mail address, and successfully changed my Apple ID to reflect the new e-mail.  However, while trying to order a book through iBooks today, I noticed that I was asked for my password and that my old e-mail was showing.  How can I change the old address to the new one so that I can order from iBooks?  Thank you.
    janiekhi

    Hi, fromsouth, and thank you for your reply.  When I go to store, there is no place that says "sign out" so I can't do this.  My old email is showing, and when I click on it I am asked for my password.  I tried my old password that I used with that email, but was told it was incorrect.  This is so frustrating!  I can't do any ordering on my iPad until this problem is solved.  Thanks again.
    janiekhi

  • Possible to export video of the multicam preview window that shows all of my angles on one screen?

    hello,
    i have created a multicam sequence successfully and want to send my client a video showing them all 7 angles playing back in sync.  basically i want to send them exactly what i see on the left half of the screen when i enable multicam view in the program window.  is there a way to do this without having to go back to my original sequence and use the position and scale settings to show all 7 camera angles at once?
    i know using the position and scale is not difficult just hoping there is a faster way since the application is already doing exactly what i need when it generates the multicam view in the program monitor.
    thanks in advance
    matthew
    working in Premiere Pro CC 7.2.2

    Hi all
    I'm just speculating here, but I am aware that not all .AVI
    files are created equally. As I understand it, there are a plethora
    of different CODECs (COmpressor/DECompressor) types used to create
    them. So I would think it would be entirely possible that the .AVI
    in question wasn't created using a CODEC that Captivate is
    understanding.
    I'm wondering if you were to try converting the .AVI to a
    .SWF using a different utility if you might see better results.
    Cheers... Rick

  • How do I get the video box not to show when I open FF4. The one with the FF icon pointing to a folder icon.

    Upon downloading FF4 on my iMAC, I get a new box that I have to click on to open FF. It has a FF logo with an arrow pointing to a folder icon.
    This did not happen when I upgraded on my PC running Vista

    You have a corrupted Firefox 3.6.8 user agent;
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.0.2 GTB7.1 (.NET CLR 3.5.30729)
    See [[Finding your Firefox version]] and [[Web sites or add-ons incorrectly report incompatible browser]]
    See also http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
    Check the <b>general.useragent</b> prefs on the <b>about:config</b> page.<br />
    You can open the <i>about:config</i> page via the location bar, just like you open a website.
    Filter: <b>general.useragent</b>
    If any <i>general.useragent</i> prefs are bold (user set) then right-click that pref and choose <i>Reset</i>.

  • I just restarted my phone, and now its frozen on the apple logo screen it shows when it restarts! anyone know how to get it to work?

    My phone is frozen on the apple logo screen that shows when restarting. I tried to restart it again, but it still freezes and stays on that screen . I really dont want to reformat! Does anyone have any idea how to fix it?  THANKS!

    You have to put it in dfu mode, when its plugged into itunes reset it by holding the home and the power button, when it starts back up let go of the power button and just hold the home button it should find your phone and say its in restore mode. from there you just have to restore it

  • I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

    I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    Plus, EXACTLY what are you editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • How to create a popup window that shows detail information when press submi

    hi,all
    how to create a popup window that shows detail information when press the submit button ?I mean,when I press the button "Sumit"there will appear a popup window that shows the detail information you typed before.it means are u sure to submit,it is like some confirmation window.
    how to do achieve this ?help plz .
    best regards
    hlee
    Edited by: hlee on 2011-4-15 上午1:26

    hey,vee
    thanks for your response,but i had already read this thread before i put up a new question.any way,thanks.
    best regards
    hlee

  • I need the timenumbers that shows when I play a song to be bigger. Any suggestons? I didn`t help to increace the lettersize.

    I need the timenumbers that shows when I play a song, to be bigger. Any suggestions? I have tried to increace the letters, but the numbers didn`t get bigger.

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • My Classic IPod had been working perfectly with Windows Vista OS and on a dock. I left it unattended for 10 days, recharged it and tried to play music on the dock. All that shows on the screen is the Apple Logo and I am unable to restart or update the IPo

    My Classic IPod had been working perfectly with Windows Vista OS and on a dock. I left it unattended for 10 days, recharged it and tried to play music on the dock. All that shows on the screen is the Apple Logo and I am unable to restart or update the IPod. Any ideas???

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • I can't get my Ipad to show up at all in Itunes.  1 How do I fix that and 2 Can I fix this without losing all of the videos and apps that aren't synched with my computer yet?

    I can't get my Ipad to show up at all in Itunes.  1 How do I fix that and 2 Can I fix this without losing all of the videos and apps that aren't synched with my computer yet?

    http://support.apple.com/kb/ts1591
    http://support.apple.com/kb/TS1538

  • The window that opens when I click on the Time Machine icon is Finder (devices) and when I close this Time Machine also closes.

    The window that opens when I click on the Time Machine icon is Finder (devices) and when I close this Time Machine also closes.

    You will need to be much more specific about what you problem is. That is how TM works. That is how you find things to restore from TM, by using a Finder window so that you can browse through the Mac's hierarchy of folders and files.
    Why are you double posting this?

  • I am trying to get a good copy of my home video on DVD using IDVD.  On editing the video all the viewing screens show the video perfectly in HD.  When I burn the video to DVD all the end results are buzzy with squiggly lines.  Any fix?  Thanks?

    I am trying to get a good copy of my home video on DVD using IDVD.  On editing the video all the viewing screens show the video perfectly in HD.  When I burn the video to DVD all the end results are buzzy with squiggly lines.  Any fix?  Thanks?

    Hi
    There are several layers to this Q
    A. There are no HD in DVD - DVD is as standard only SD-Video what ever tools used to produce it !
    iDVD or DVD-Studio Pro or Roxio Toast™ - will only make SD-Video on DVD
    B. DVD can be better or worse
    • Using "Share to iDVD" is no good way - Better is Share to Media Browser and as Large (NOT HD as result will be worse)
    • Using iMovie'08 or 09 or 11 - are not tools to chose if highes quality is of importance - iMovie up to HD6 or FinalCut any version is far better as they send over all lines to iDVD and not only every second one.
    • Using Right encoder quality depending on movie and Manu duration is very important
    • Use of high quality brand of DVD - is important - I use Verbatim DVD-R
    • Type of DVD - DVD-R plays on more DVD-Players (even old ones)
    • Burn speed - I set it down to x4 - resulting in less burn errors - plays on more players
    • I secure a minimum of 25Gb free space on Start-Up Mac OS hard disk as iDVD and Mac OS needs this and it can not be taked from other hard disks - has to be here.
    • What You feed iDVD does matter
    Video codecs
    Audio file formats
    Photo file formats
    Yours Bengt W

  • Can you increase the size of the photo that shows when you receive a call from a contact

    Can you increase the size of the photo that shows when you receive a call from a contact ?

    It used to be if you added the contacts photo on the iOS device they would have a large picture and if you added it from Address Book on OS X they would have a smaller thumbnail.  However, since iOS5, all I've been able to get is the larger photo.  Try adding the picture directly in the contacts app on your device.  That should make it larger.

  • How do I change the email address that shows when I try to sign in to update apps

    The email address for the iPad has to be changed -- cnnot log into app store

    The email that shows when updating Apps is the Apple ID under which the App was purchased. Apps cannot be transferred between Apple IDs. The only way to change this is to delete the App and repurchase it under your correct Apple ID.

Maybe you are looking for

  • Document type should always post to specific account type

    Hello experts, I have 1 question,  Depeneding on the Document type definition I can post to different account types (S, K, D , M ,A). Assume I created a doc type ZA and checked all the account types then it allows me post to all the account types. He

  • GR message to Buyer

    Hi, I am trying to implement the GR message notification functions to Buyers. I have maintained all the configuration details -MLGR -Output type with access sequence as in standard sAP settings , condition tables 071. Created Condition Records throu

  • Help for Illustrator CS3 - change grids?

    Hi, I am relatively new to Illustrator and I have come across a problem I can't seem to find the answer to. I am trying to change my grid from 5 increments to 8, but I do not know how and if it's possible to so at all? Please help, I am stuck

  • Transparency with jpeg images

    Apologies if this is a dumb question; I can't seem to find the answer to it. Basically, I'm importing a JPEG image and I want to ignore a certain color when I draw the image. I want to skip over any pixel with that color so that whatever was there be

  • All apps lost after synch

    This morning I connected my 3GS to my laptop which was NOT on the net. I have I tunes set for manual synch yet it still goes on it's own. Anyways, after the synch is done, all of my apps were gone. Ones that were free and ones I paid for. Tried to pu