The virtual machine has terminated unexpectedly during startup with exit code 1 (0x1)

Hello All,
I came up with the error below, when I am trying to start a virtual machine from my VirtualBox. It was working fine till yesterday, and all of a sudden it's throwing this error. The only change I can think of, is of some automatic windows update which might have changed/updated the registry entries.
VirtualBox Version: 4.3.20
Host: Win7 64 bit
Guest: OracleLinux 64 bit
Failed to open a session for the virtual machine DEVM.
The virtual machine 'DEVM' has terminated unexpectedly during startup with exit code 1 (0x1). More details may be available in 'E:\VM\DEVM\Logs\VBoxStartup.log'.
Result Code: E_FAIL (0x80004005)
Component: Machine
Interface: IMachine {480cf695-2d8d-4256-9c8c-cce0000fa123}
Please suggest on how to move forward.
Thanks,
Moore

When something happens that probably affects many users, such a as bad Windows update, checking the most recent reports in the Virtualbox product forum might be the best address:
https://forums.virtualbox.org/viewtopic.php?f=6&t=65083
https://forums.virtualbox.org/viewtopic.php?f=6&t=65056

Similar Messages

Virtual Machine has aborted error during Java EE SDK install

Hi all,
I'm trying to install java_ee_sdk-6u3-jdk7-windows-x64.exe on our new Windows Server 2012 machine but the installer starts and I then get a Setup box appear that says Error: The Java(TM) Virtual Machine has aborted. I've looked in the Event Viewer and there are no messages and I've tried to get the installer to create a log file (by passing the parameter -l <loglocation>) but it doesn't seem to get that far as no log is created.
The very first time I tried to run the JavaEE install on this machine, it installed everything ok but didn't create the windows service as .NET Framework 3.5 was missing. So I uninstalled JavaEE and added in the .NET Framework 3.5 and then my problems began. I have already installed these versions of Java and JavaEE successfully on a previous Windows Server 2012 machine which had the .NET Framework 3.5 on it.
The JRE installed already on the computer is jre-6u45-windows-x64.exe and I am logged in as an administrator. I've tried uninstalling the JRE and reinstalling and also doing a registry clean using CCleaner incase there are any old references to the JRE/JavaEE but it didn't help.
If anyone can give me any clues as to why this error is appearing I'd be most grateful!
Thanks,
Caroline

Have finally got this to work after a lot more headscratching. Turned out just passing the path to the JRE to the install wasn't good enough, I had to include the drive letter too even though it was on the same drive!

Windows O/S running in the virtual machine has frozen does not want to shut down

Our old Windows-based PC is a virtual machine on our iMac (it is accessed using VMWare Fusion 2). The Windows XP Home Edition O/S froze when booting, and cannot be shut down by sending a Ctrl-Alt-Del or Force Quitting VMWare Fusion. Putting the iMac in Sleep mode or restarting it makes no difference. The virtual machine is still in a suspended state, and there appears to be no way of either getting it to finish booting the Windows O/S or shutting it down. Any ideas as to how to unfreeze it? At this point in time, all I want to do is get back into the Windows side, rescue any data files I need, and stop using the virtual machine.

VMware Fusion issues should be posted in the VMware Fusion forums:
http://communities.vmware.com/community/vmtn/desktop/fusion?view=discussions
That said, you can "Force Shut Down" a virtual machine by holding down the Option key, then clicking on the Virtual Machine Menu. "Shut Down" becomes "Force Shut Down".
More than likely what you'll need to do is hold the Option key, then choose "Force Restart" to get Windows to boot again. Then use "Force Shut Down" to power off the VM, if a normal shut down does not work after that. Do NOT close the VM window, or put the Mac to sleep as this will initiate another suspend procedure.

How to resolve this issue in windows 7 ?? "An Internal Virtual Machine error (3) has occurred. The virtual machine will reset now."

Dear Friends,
Do kindly help me out on this issues. I have installed Microsoft Virtual PC 2007 in my PC and i am trying to create an new virtual machine for several testing. I have a clean ISO image of windows 7 . I import through Captured ISO option. The system tries
to configure the OS . But during the configuration i am getting this error.
*Your PC needs to Restart.
Please hold the power button.
Error Code: 0X0000005D
Parameters:
0x03063A09
0x756E6547
0x49656E69
0x6C65746E
An Internal Virtual Machine error (3) has occured.
The virtual machine will reset now.
I have Enabled the virtualization settings in BIOS.
Kindly help me out to resolve this issue.
Base Machine Platform : Windows 7 - 32 Bit and Windows 7 - 64 Bit.
ISO Image : windows 7 - 32 bit.

Error Code: 0x0000005D: Your
CPU is not compatible.
Ref : http://www.winvistatips.com/internal-virtual-machine-error-3-has-occurred-t520964.html
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Does OS installed through boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?

I am planning to buy new PC for my faculty needs and this time I am thinking to buy Apple laptop like Mac book Pro 13" or so ( I owe already IPhone and Ipad 2)
To make final decision I need few information . These are:
1. May I use Boot Camp or similar utility software to install Windows 7 OS next to OS X Lion, or use some kind of virtual box software to create virtual machines with diverse guest OS in them like Windows , Linux etc.?
2. Does OS installed through Boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?
3. May I use the same disk partitions to access to the files regardless if I am using Windows 7 or OS X Lion operating system?
4. Is there full compatibility between Microsoft Office under OS X Lion and Windows 7 M. Office?
5. What is general user experience with OS X Lion operating system comparing to Windows 7?
Thanks for sharing your experience with me.
Adnan S

adnans wrote:
I am planning to buy new PC for my faculty needs and this time I am thinking to buy Apple laptop like Mac book Pro 13" or so ( I owe already IPhone and Ipad 2)
To make final decision I need few information . These are:
1. May I use Boot Camp or similar utility software to install Windows 7 OS next to OS X Lion, or use some kind of virtual box software to create virtual machines with diverse guest OS in them like Windows , Linux etc.?
2. Does OS installed through Boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?
3. May I use the same disk partitions to access to the files regardless if I am using Windows 7 or OS X Lion operating system?
4. Is there full compatibility between Microsoft Office under OS X Lion and Windows 7 M. Office?
5. What is general user experience with OS X Lion operating system comparing to Windows 7?
Thanks for sharing your experience with me.
Adnan S
1. Yes. You can install Windows 7 natively using Boot Camp Assistant or you can install Windows 7 in a virtual machine using Parallels, Fusion, or VirtualBox
2. If installed using Boot Camp Assistant Windows 7 uses all your computer's resources just as OSx does. If installed using a VM Windows 7 will share the computer's resources with OSx.
3. A Boot Camp partition is separate from the OSx partition. The VMs allow sharing of files across partitions since both OS are running at the same time.
4. No, not 100%.
5. Too broad a question. Be specific about what feature you are asking about or search the Internet for comparisons. I use both and find they both work well.

The DPM service terminated unexpectedly during completion of the job. The termination may have been caused by a system reboot. (ID 910)

The DPM service terminated unexpectedly during completion of the job. The termination may have been caused by a system reboot. (ID 910)
No idea what happen and how to fix this?

I still got this on full backup to tape, anyone experienced this issue?

"A critical error has occurred while running the virtual machine and the machine execution has been stopped"

I have the following error:
"A critical error has occurred while running the virtual machine and the machine execution has been stopped"
When I am installing grid clusterware and when is copying files from one node to other I received that virtualbox error and is stop working.
Can somebody give me any hint how to solve it ?
Thank you
Eugen

I think that is not a Clusterware issue, The clusterware installation may generating a high load on your machine and Virtual Box is not supporting.
Check vbox.log file to identify root cause.

�Unable to create the virtual machine. The error was -4�

I have a VS2003 C# application, which call JACE (a JNI wrapper) through C++ mixed mode to use JAVA object�s functions.
Because the natural of our JAVA program it must be able to reach maximum heap size of 512MB, we set it during the startup of JVM by using �-Xmx512M� parameter.
It worked well with a small PC (Dell Optiplex GX750 and Shuttle Xpc ) with only 512MB physical memory. We have about 50 machines running the application in the production.
Recently, one of our customers installs the application to a larger PC ( Shuttle Xpc with different model), which has 1 GB of physical memory. The application started throw exception from JVM. The error message is �Unable to create the virtual machine. The error was -4�. I checked with JNI return code and found that -4 mean �not enough memory�.
I did some experiment by running the application with 2GB PC, 1 GB PC, 1GB laptop, 512MB PC. I don�t found relationship between how much �maximum heap size� can be assigned and how much �physical memory� is available (reading from task manager). The 2GB machine can take only 128MB of �maximum heap size� However, 1GB machine can take up to 300MB of �maximum heap size�.
I also use program like ImageJ (http://rsb.info.nih.gov/ij/) to test maximum heap size for it. I found that ImageJ can take 512MB maximum heap size without problem. It can even take 1024MB of maximum heap size.
I have created a small program to duplicate this problem. Although it use exact the same code to start JVM up, it can go up to 650MB heap size for both 2GB and 1GB PC.
This is puzzling. Does anyone know what are factors determine how much �maximum heap size� can be set for JVM from JNI?
Software used
Windows XP SP2
Visual studio.net 2003 SP1 (the problem also occurred without SP1)
.NET Framework 1.1 SP1
JACE 1.1rc1_05
JRE 1.5.07 (also tested with JRE 1.5.09 and 1.6.0 beta)

Do you resolve the problem? If so what was the fix?
I have been getting the Java Virtual Machine Launcher error message Could not create the virtual machine when attempting to run an Oracle application that uses JNLP via a browser. Even clicking on componets such as javaw.exe produces the error message. In conjunction with receiving the error message, the application that I am working with will not launch.
I had JRE 5u10 and J2RE 1.4.2u13 installed and thought that installing JDK 5u17 may resolve the issue. I removed JRE 5u10 and J2RE 1.4.2u13 and installed JDK 5u17 (and the included JRE 5u17.) The error message was still there.
I have unistalled (via Add/Remove programs) and reinstalled (via both Win off-line and on-line) JDK 5u17 and JRE 5u17 many times.
During the uninstalls I have received a Java Web Start 1.5.0_17 bad installation error invoking JVM error message.
I have restarted the machine also.
There are some remains of J2RE 1.4.2u13 still on the machine even after the 1.4.2u13 uninstall. The Java\j2re1.4.2_13\lib folder remains.
I am running Win XP SP2 and IE6 SP2.
Note: I cannot use Java 6 since the application that I am working with is Java 5 based.

An error occurred while attempting to export the virtual machine (0x80070050)

I was exporting several VM's from a Vhost so that i could import them into a new cluster. Four out of the five machines went off with no hitch and were exported and then imported. However one of the machines throws up an error durring the export
"An error occurred while attempting to export the virtual machine.
Filed to copy file during export.
Failed to copy file from 'D:\path\of\vhd\VM.vhd to 'D:\path\of\export\VM.vhd': The file esists (0x80070050)"

I have found an answer to my own question after
further investigation … In hopes of helping anyone who may have a similar problem in the future....
What happened was the server has two VHD’s one is located in C:\vm\vhd\server.vhd the second was located in a different directory such as C:\vm\vhd1\server.vhd
as both vhd files were named identically when the export was attempted it tried to move both files into the same directory I assume giving the “file already exists error”.

2008R2 Virtual machine shutting down unexpected on Hyper-V 2012 server

I have a problem where one of my 2008 R2 virtual servers are shutting down unexpected every Friday at more or less the same time. This has happen 2 Fridays in a row now and the time is 13:01:30 and 13:01:10. I did some investigation on the event viewer and
it tells me the following: (Error) The previous system shutdown at 01:01:10 PM on ‎2014/‎08/‎01 was unexpected. Event ID: 6008 which I have goggled and did not find much on this ID? I also found the following event more or less the same
time as the first one: (Critical) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Event ID: 41. In most posts it looks like if it could
be hardware related? But how do I justify this on a virtual machine?
Some Infrastructure background: It is a 2008 R2 virtual server running on 2012 Hyper-V, 2012 server. SCVMM is not configured so all administration is done through Hyper-V manager. The virtual machine is backup up by Symantec backup exec and the Full backup
only start at 23:00pm night time. No scheduled shut-downs are configured and all servers are running on UPS power, the virtual server are also configured to boot up automatically after any failure. But in this case the server is completely shut-down and I
have to manually start the server up again.
I hope there are somebody who can give some guidance on my problem?
Regards
Juan Krynie

Hi Sam
Thanks for the reply!
Yes, all disk space is on the host, I have 2 hosts running Hyper V each with their own set of virtual servers, I am planning a cluster in the near future, but for now all disk space for all virtual server are on the host, there is more than enough disk space
left on all drives. Please below output from command, I only posted first few lines as there are to many lines.
Shadow Copy ID: {17e38390-dcb5-4ac4-9f43-62bc1a4c1dc2}
Original Volume: (C:)\\?\Volume{f7e4a444-a922-11e2-93e8-806e6f6e6963}\
Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy709
Originating Machine: ELAPNS02.AMentis.local
Service Machine: ELAPNS02.AMentis.local
Provider: 'Microsoft Software Shadow Copy provider 1.0'
Type: ClientAccessible
Attributes: Persistent, Client-accessible, No auto release, No writers,
Differential
Contents of shadow copy set ID: {f938ba80-7641-457c-8297-863bf8419aba}
Contained 1 shadow copies at creation time: 29/08/2014 07:00:12
Shadow Copy ID: {44657104-c8bc-44ee-b8cb-b0469601531d}
Original Volume: (C:)\\?\Volume{f7e4a444-a922-11e2-93e8-806e6f6e6963}\
Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy713
Originating Machine: ELAPNS02.AMentis.local
Service Machine: ELAPNS02.AMentis.local
Provider: 'Microsoft Software Shadow Copy provider 1.0'
Type: ClientAccessible
Attributes: Persistent, Client-accessible, No auto release, No writers,
Differential
Contents of shadow copy set ID: {e9cb6a0c-973d-4ff5-9877-0c81ab74dc80}
Contained 1 shadow copies at creation time: 29/08/2014 12:00:16
Shadow Copy ID: {4f824796-3dd1-498a-947c-5747e25d7ebc}
Original Volume: (C:)\\?\Volume{f7e4a444-a922-11e2-93e8-806e6f6e6963}\
Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy716
Originating Machine: ELAPNS02.AMentis.local
Service Machine: ELAPNS02.AMentis.local
Provider: 'Microsoft Software Shadow Copy provider 1.0'
Type: ClientAccessible
Attributes: Persistent, Client-accessible, No auto release, No writers,
Differential
Contents of shadow copy set ID: {2f02b69b-1244-40bc-984b-f4488887d10d}
Contained 1 shadow copies at creation time: 01/09/2014 07:00:01
Shadow Copy ID: {8d039039-51ac-4cbf-be0a-4defb989a22c}
Original Volume: (C:)\\?\Volume{f7e4a444-a922-11e2-93e8-806e6f6e6963}\
Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy843
Originating Machine: ELAPNS02.AMentis.local
Service Machine: ELAPNS02.AMentis.local
Provider: 'Microsoft Software Shadow Copy provider 1.0'
Type: ClientAccessible
Attributes: Persistent, Client-accessible, No auto release, No writers,
Differential
Contents of shadow copy set ID: {55b3d33e-a347-46cd-bf39-686acd7329ab}
Contained 1 shadow copies at creation time: 01/09/2014 12:00:01
Shadow Copy ID: {1239354e-3037-42b1-802c-27e1187c13b1}
Original Volume: (C:)\\?\Volume{f7e4a444-a922-11e2-93e8-806e6f6e6963}\
Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy846
Originating Machine: ELAPNS02.AMentis.local
Service Machine: ELAPNS02.AMentis.local
Provider: 'Microsoft Software Shadow Copy provider 1.0'
Type: ClientAccessible
Attributes: Persistent, Client-accessible, No auto release, No writers,
Differential
Contents of shadow copy set ID: {813607c5-5d31-41b3-8b1c-5f89ef2e5b0b}
Contained 1 shadow copies at creation time: 02/09/2014 07:00:12
Shadow Copy ID: {0e1350a7-3fec-48fb-8fcb-d035dbfb001c}
Original Volume: (C:)\\?\Volume{f7e4a444-a922-11e2-93e8-806e6f6e6963}\
Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy850
Originating Machine: ELAPNS02.AMentis.local
Service Machine: ELAPNS02.AMentis.local
Provider: 'Microsoft Software Shadow Copy provider 1.0'
Type: ClientAccessible
Attributes: Persistent, Client-accessible, No auto release, No writers,
Differential
Contents of shadow copy set ID: {ec206fef-a325-41c9-90b5-c4c6de3f94a8}
Contained 1 shadow copies at creation time: 02/09/2014 12:00:19
Shadow Copy ID: {aea06cae-f88f-4941-bc33-4ca62bf3380f}
Original Volume: (C:)\\?\Volume{f7e4a444-a922-11e2-93e8-806e6f6e6963}\
Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy853
Originating Machine: ELAPNS02.AMentis.local
Service Machine: ELAPNS02.AMentis.local
Provider: 'Microsoft Software Shadow Copy provider 1.0'
Type: ClientAccessible
Attributes: Persistent, Client-accessible, No auto release, No writers,
Differential
Contents of shadow copy set ID: {45820935-e5c4-47a5-9979-0df9187194c8}
Contained 1 shadow copies at creation time: 03/09/2014 07:00:01
Shadow Copy ID: {8b14fdd6-2f2b-4cad-93b8-391c1d913cb3}
Original Volume: (C:)\\?\Volume{f7e4a444-a922-11e2-93e8-806e6f6e6963}\
Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy854
Originating Machine: ELAPNS02.AMentis.local
Service Machine: ELAPNS02.AMentis.local
Provider: 'Microsoft Software Shadow Copy provider 1.0'
Type: ClientAccessible
Attributes: Persistent, Client-accessible, No auto release, No writers,
Differential
Contents of shadow copy set ID: {52277c29-ce5c-4c59-bfd4-9174b4870a02}
Contained 1 shadow copies at creation time: 03/09/2014 12:00:17
Shadow Copy ID: {199611ca-ec3f-435f-828e-bc1748b02bf9}
Original Volume: (C:)\\?\Volume{f7e4a444-a922-11e2-93e8-806e6f6e6963}\
Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy858
Originating Machine: ELAPNS02.AMentis.local
Service Machine: ELAPNS02.AMentis.local
Provider: 'Microsoft Software Shadow Copy provider 1.0'
Type: ClientAccessible
Attributes: Persistent, Client-accessible, No auto release, No writers,
Differential
Contents of shadow copy set ID: {1dfaeb8b-3726-4f08-8582-5fec43bd6b37}
Contained 1 shadow copies at creation time: 04/09/2014 07:00:01
Shadow Copy ID: {d6ae9b1a-41ef-4db5-9c44-581ee7d7192d}
Original Volume: (C:)\\?\Volume{f7e4a444-a922-11e2-93e8-806e6f6e6963}\
Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy859
Originating Machine: ELAPNS02.AMentis.local
Service Machine: ELAPNS02.AMentis.local
Provider: 'Microsoft Software Shadow Copy provider 1.0'
Type: ClientAccessible
Attributes: Persistent, Client-accessible, No auto release, No writers,
Differential
Juan Krynie

While deleting the virtual machine .vhd folder -- error msg : the process cannot access the file beacuse it is being used by another process

When i am trying to delete the Virtual Machine folder/directory i get the below error. Virtual machine is turned off
V:\>rmdir ME-EXCAS01 /s
ME-EXCAS01, Are you sure (Y/N)? y
ME-EXCAS01\ME-EXCAS01\Virtual Machines\1B1FD14E-B3F0-4232-9F96-2A871E879CD6.xml
- The process cannot access the file because it is being used by another process
How to delete the whole folder ?
Thanks

Also, if your VM has snapshots and you delete it, you must wait for the snapshots to finish merging - the VHD files will be locked until then.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Hyper-V on Windows 8.1 64 bit, "Could not send keys to the virtual machine"

Hi,
I newly installed Windows 8.1 (not an upgrade, fresh install from corporate network) on a Dell Precision T7600 workstation and enabled the Hyper-V feature with the matching management. I created a couple of 2 GB RAM, 2 virtual CPUs VMs and am trying to install
Windows Server 2k8R2 and 2k12 on them. After a network boot, during the first couple dialog boxes for Windows setup, I am unable to use the keyboard. When I try to boot from an ISO, the VM get stuck on a black screen "Starting Windows". In either
case if I use the VM connection window menu to paste from clipboard or send ctrl+alt+del, I get the error:
Virtual Machine Connection
Could not send keys to the virtual machine.
Interacting with the virtual machine's keyboard device failed.
I search online for this error and did not find others experiencing it.
I tried to shutdown and reset both VMs, I stopped and restarted the Hyper-V service. Neither helped. I am not sure what other step I can take at this point.
Also, I configured a virtual switch as external network on one of the two Intel network adapters. Both connect to a gigabit switch. "Allow management operating system to share this network adapter" is checked. Both VMs are on the same virtual switch.
Senior Soft. Dev. Eng. | Microsoft IT | Microsoft Corporation

Hi,
Can you find any information in event log about this issue?
Based on my research, it seems that the Dll file related to Hyper-v was corrupted.
I suggest you try using the following command to repair your system.
1.Open an elevated command prompt: press Win+X, then click Command Prompt(Admin),and press Enter.
2.At the command prompt, type the following command, and then press ENTER:
Dism /Online /Cleanup-Image /RestoreHealth
Regards,
Kelvin hsu
TechNet Community Support

Problem with the virtual machine

Hello.
i've encountered problem with the virtual machine. Java instance is reseting sometimes. I found message in dev_server0 there is:
<b>
[Thr 6] JLaunchIExitJava: exit hook is called (rc = 666)
[Thr 6] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
</b>
in dev_jcontorol:
<b>
[Thr 1] Thu Mar 13 15:58:39 2008
[Thr 1] JStartupICreateProcess: fork process (pid 16077)
[Thr 1] JControlICheckProcessList: process server0 started (PID:16077)
</b>
where i can looking the reason of this?
regards,
Denis

Hi Denis,
This looks like a memory issue, similar problems have been posted on this forum before.
Change the following params.
-XX:PermSize=2048m
-XX:MaxPermSize=2048m
Also,
See SAP note 709140 and the referenced notes.
Regards,
Siddhesh

Expanding the virtual machine max memory in osx

i just upgraded the memory on my power mac because this java program im using requires alot of memory on the heap. i remember on windows, there is a property file u can tweak to increase the max memory used by the virtual machine, im just wondering if you can do the same with osx (10.2)

Yes - it's in Applications/Utilities and it's called Terminal. Default shell is tcsh but you can download bash and configure it to use that - there are probably other shells out there too.

Plz rewrite the virtual machine

I've been using Flash for about 10 years since version 3 and through all those years have been a faithful developer and supporter. I started as a newb and have advanced to being able to create advanced object oriented architectures in Flash. I've noticed that over the years that new features have been continuously added to the Flash player however the underlying architecture is holding it back from obtaining greater speed (higher framerates). Recently with new products that may compete with Flash such as Objective C for the iPhone, Unity3D and Khronos and Mozilla (For those who do not know, Khronos group brought to the world OpenGL, OpenCL Collada, OpenSL ES, OpenGL ES, etc.) As I've become a better developer and programmer I've felt the actual need for more speed from the Flash player. The Flash player has gotten faster compared to the old days of actionscript 2 by providing more subtle control over the code in actionscript 3 (though I think the garbage collection still needs to provide the developer the option to do it themselves) the speed increase is still not enough and I strongly believe that the virtual machine should be rewritten to support maximum speed than minimum file size (or perhaps provide the option to developers). I know I'm asking for a lot, however the future of Flash could be on the line, when you think about the strong competition that's coming in.

I've been using Flash for about 10 years since version 3 and through all those years have been a faithful developer and supporter. I started as a newb and have advanced to being able to create advanced object oriented architectures in Flash. I've noticed that over the years that new features have been continuously added to the Flash player however the underlying architecture is holding it back from obtaining greater speed (higher framerates). Recently with new products that may compete with Flash such as Objective C for the iPhone, Unity3D and Khronos and Mozilla (For those who do not know, Khronos group brought to the world OpenGL, OpenCL Collada, OpenSL ES, OpenGL ES, etc.) As I've become a better developer and programmer I've felt the actual need for more speed from the Flash player. The Flash player has gotten faster compared to the old days of actionscript 2 by providing more subtle control over the code in actionscript 3 (though I think the garbage collection still needs to provide the developer the option to do it themselves) the speed increase is still not enough and I strongly believe that the virtual machine should be rewritten to support maximum speed than minimum file size (or perhaps provide the option to developers). I know I'm asking for a lot, however the future of Flash could be on the line, when you think about the strong competition that's coming in.

The virtual machine has terminated unexpectedly during startup with exit code 1 (0x1)

Similar Messages

Maybe you are looking for