The vm and host networking components failed to negotiate protocol version '4.0'

Hi,
I have the problem that when I start a VM with windows server 2012 on a hyper-v v2 host, it takes very long till the VM get bind the static or dynamic ip adress. I tried both, static and dynamic. In every case I see at the event viewer the following error:
the vm and host networking components failed to negotiate protocol version '4.0'
After a few minutes the VM gets bind the IP an everything works fine. But at the next time I reboot the machine the same failure appear.
Trying to use legacy network adapter results in the same problem. After this I tried to export the vm to a hyper-v v3 host. At first boot time
the problem didn't appear and the vm get's bind the ip adress without problems. Then after upgrading the integration services to hyper-v v3
version the same problem appears but without register it in the event viewer.
Does anybody know how I can fix this problem?
Kind Regards,
Marcus

Hi,
A MS KB records an issue when you run Windows 8 or Windows Server 2012 based Virtual machine in Windows Server 2008 or in Windows Server 2008R2:
http://support.microsoft.com/kb/2744129
There is a Microsoft update in this KB, you may install this KB in your Windows Server 2008 R2 and check the result.
While about this issue after you migrate the guest VM to Windows Server 2012 host, will it still has such error message after you remove all network adapters of the guest VM?
Install Windows update for the Hyper-V host, after that upgrade Integration service for the guest VM again to check the result.
For more information please refer to following MS articles:
"Unsupported configuration" warning when you run a Windows 8-based or Windows Server 2012-based virtual machine in Windows Server 2008 R2
http://support.microsoft.com/kb/2737297
Hyper-V Overview
http://technet.microsoft.com/en-us/library/hh831531.aspx
Lawrence
TechNet Community Support

Similar Messages

  • The VM and host networking components failed to negotiate protocol version '5.0'

    I have been searching for a fix for this issue for sometime.
    The VM and host networking components failed to negotiate protocol version '5.0'
    and
    The VM and host networking components failed to negotiate protocol version '4.0'
    this error have been posting on the host server 2008 R2, with a hyper-V running server 2012 R2, which is the eval version vhd from Microsoft.
    I have tried the patch on the server 2008 R2 host and the nic delete and rescan option with varied reboots and such between each step of the process just to try every possible combination.
    The error persists. Are there any other suggested solutions for fixing this problem. Also the drivers have all been updated along with the system firmware.
    thanks,

    The hotfix states Server 2012 in the VM. You stated Server 2012 R2 in the VM.  MSFT is very precise in this language - Server 2012 != Server 2012 R2.
    Two distinctly different releases of Windows Server.
    In this case the N = the running release of Hyper-V.  In this case your Hyper-V Server at release version 2008 R2.
    The +2 = the current version of Windows.  In this case that is 2012 R2.  Two releases ahead of the version of the hypervisor you are running.
    I tossed in the link to Ben Armstrong's blog article as that is the ONLY (and still definitive statement) support statement regarding this configuration.  He posted that article at my request after many folks posting in this forum with strange behavior
    in this configuration.
    "supported" in this context means that if you call CSS, you will be told the following: 'yes, you have errors in the event log.  We will not fix that.  This is an unsupported configuration.  But that does not block the OS in the
    VM running.  If you want the errors to go away, we suggest you upgrade your Hyper-V Server to 2012 R2.  That configuration is supported.'
    That said, it can impact other functionality of the VM that rely on Integration Components in the VM and the Services of the hypervisor.  There is most likely small things that will not work.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • Is possible to purchase the program and host it on our own server?

    Is possible to purchase the program and host it on our own server?

    Like so many questions, the answer is: yes... maybe.
    Mac OS X Server includes a web server, so it's entirely possible (trivial, even) to create a web site on your server.
    Making it available to the outside world depends a little bit on your network connection - you'll probably need to tweak your router/firewall configuration to let external connections into your server.
    Then you also need to consider your network speed - remote users will be limited to the upload speed of your link - if you're on a residential link that might not be all that fast. In addition, many large ISPs restrict the running of servers on residential connections (you don't say whether your server is located on a business or residential link).
    Beyond that, though there are various back-end technologies that you can use to add dynamic elements to your pages (so they're not just static HTML pages). Things like PHP, Perl, Ruby, Python and more are built in, as is MySQL if you want a databased-driven site. Some technologies are not supported, though, such as ASP. Therefore you might need to consider what dynamic content system (if any) you want to run.

  • How to restart base station from airport utility? I used to be able to do it remotely  I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

    How to restart base station from airport utility? I used to be able to do it remotely
    I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
    With my prior macbook and same time capsule, etc  if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
    Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
    Thanks in advance

    You are likely forgetting a step.
    Open AirPort Utility
    Click on the Time Capsule icon
    Click Edit in the small window that appears
    Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
    Click Restart

  • I have a slow startup or login, with numerious spinning wheels. Sometimes after a long ti,e I can sign into the computer and sometimes it just fails to startup or login. I have a MacBookPro OS X 10.7.5 from 2011

    I have a slow startup or login, with numerious spinning wheels. Sometimes after a long ti,e I can sign into the computer and sometimes it just fails to startup or login. I have a MacBookPro OS X 10.7.5 from 2011. It became more serious recently as I think I might have let my battery run out I also tried to download the operating system to reinstall it but it allways stops around 1.4 GB out of 1.7 then the whell starts again.

    Keep the MBP attached to the power adapter.
    First try SMC and PRAM resets:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379
    Then try to boot the MBP in recovery (OPTION key down) and select the recover partition.  Select Disk Utility>First Aid and verify and repair the HDD.
    Additional steps can be found here:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.

    I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.

    Disable all Firewalls & Anti-Virus software...try again.

  • IPhone 2G doesn't connect to the Internet over the O2 and edge network??

    Hi people,
    My iPhone won't connect to the Internet through the O2 and edge network, it used to work? Maybe an update has done something?? Any ideas to resolve my issue would be greatfully appreciated!! I have got software version 3.0 at the moment.
    Regards
    Carl

    I would try a Reset first: Hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.

  • When Will Microsoft Fix The Problem With Hosted Networking on a Surface Pro 3?

    Surface Pro 3 512GB
    Windows 8.1 with all patches.
    The following is from this thread:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/netsh-wlan-start-hostednetwork-not-working-on/f414cea9-c110-483c-a3a2-840a4ce317e2?rtAction=1423330004507
    A Microsoft member said it would be better to raise it in technet.
    netsh wlan set hostednetwork mode=allow ssid=test key=12345678
    The hosted network mode has been set to allow.
    The SSID of the hosted network has been successfully changed.
    The user key passphrase of the hosted network has been successfully changed.
    netsh wlan start hostednetwork
    The hosted network couldn't be started.
    A device attached to the system is not functioning
    One of the comments in the thread said:
    "I have the same issue on a Surface pro 3.
    It is related to the fact that they removed VAP support from the wifi driver."
    Now a new wifi driver was included with the latest firmware update (01/15/2015) but it did not fix the problem.
    I
    Please note this is a Surface Pro 3 problem as it works on a Surface Pro 2 running Windows 8.1.
    This problem has been reported to Microsoft by me and I was told "the developers are working on it."  That was six months ago.  I see posts going back a year saying the problem was reported to Microsoft Support.
    When will this be fixed?

    On Sat, 7 Feb 2015 18:06:38 +0000, saberman_Plus_1 wrote:
    >This problem has been reported to Microsoft by me and I was told "the developers are working on it."  That was six months ago.  I see posts going back a year saying the problem was reported to Microsoft Support.
    Do you have a case number? From
    http://answers.microsoft.com/en-us/surface/forum/surfpro2-surfnetwork/how-do-i-get-the-wireless-hosted-network-feature/03657fe5-b8c1-48c5-940a-ae3e13ffe25f
    you've had a couple of contacts with support.
    If you provide case numbers, it would be helpful in escalating further. And more
    specifically, it might help someone from Microsoft determine IF the issue has
    been escalated. While Microsoft has been doing work on the wifi driver for
    nearly the entire time since the SP3 was released, there is no information
    anywhere as to whether this bug is known or not.
    As you also know, I sent it in to the"right" people inside Microsoft and as you
    also know, I did not get a response. (I'm an end user just like you even though
    I'm a Community Moderator on the Surface Forum in Communities).
    -- Barb Bowman

  • Apps locked / frozen and on going to setting and rest it asks for pass code. Use standard one that I use all the time and it states 1 failed attempt. I have not forgotten pass ode as I use it 20 times a day. Over 70 years of age so make the response simpl

    The 3 apps required updating but they have frozen. Did not realise this until Candy Crush froze. Went to reset and it asked for pass code. I entered standard code and it stated one failed attempt. I may be over 70 years of age but have not forgotten pass code!! I hope that the solution is simple!!

    If your iPad was used by another person in the past, it may be asking for their passcode.
    If your iPad has been synced with a computer before, restoring with your computer should fix it now.
    Read all directions.
    Per these directions...
    http://support.apple.com/kb/HT1212

  • Nodata in the [DiskRead and Write]&[Network Received and Transmitted] of the reports

    Hello everyone!
    I'm a newbie.
    The problem is the column of [DiskRead and Write]&[Network Received and Transmitted] has nodata.The others are OK(CPU,Memory etc.).  I already set the base rate for [DiskRead and Write]&[Network Received and Transmitted]  and I do some operations like copy files from one to another VM in the VM. But it still 0.00 in the report .
    Can anybody tell me why? Is anything wrong in my vCenter Database?
    Thank you very much!

    Hello,
    Thanks for sending the data.
    The query that we asked you to run gives the values of network transmit-receive and disk read-write that CBM data collector has collected from VC.
    A closer look at the output of the query shows that CBM has been able to collect data for network received and transmit (resource_id=6) from VC. The attached report contains costs for network received and transmit.
    But there is no data for disk read and write (resource_id=2). So the report shows 0 costs for disk read and write.
    Now we need to know the cause of  absence of this data from CBM DB. As a first step, we will like to see if VC DB contains disk read-write related data. Can you please attach the output of following steps?
    1)  Please run following query on CBM DB
    select entity_moid from cb_vc_entity where vc_entity_id=(select vc_entity_id from cb_vc_entity_mapping where cb_entity_id=(select entity_id from cb_entity where entity_name='work_GJL'))
    This will give 'moid'. This moid should be used in the next query.
    2) Please run following queries on VC DB.
    We need outputs from 4 tables namely:
    i) VPXV_HIST_STAT_YEARLY
    ii) VPXV_HIST_STAT_MONTHLY
    iii) VPXV_HIST_STAT_WEEKLY
    iv) VPXV_HIST_STAT_DAILY
    Substitute <table name> in the following query with each one of these and store the outputs of different queries independently and attach here.
    select SAMPLE_TIME, SAMPLE_INTERVAL, STAT_VALUE from <table name> where ENTITY LIKE 'moid from above query' AND STAT_NAME = 'usage' and STAT_GROUP = 'disk' and STAT_ROLLUP_TYPE = 'average' order by SAMPLE_TIME
    Thanks,
    Mugdha

  • Can Airport Express extend the private and guest networks simultaneously?

    Can the Airport Express be used to extend the private and guest WiFi networks coming from the base station simultaneously, or can it only be an extension for one of the two at a given time?
    Joe

    Can the Airport Express be used to extend the private and guest WiFi networks coming from the base station simultaneously
    Yes, either by a wireless connection or Ethernet connection to the base station.....assuming that both the base station and extender are using firmware 7.6.3 or higher and AirPort Utility 6.3 is used to configure both AirPorts, which must be dual band models.

  • Changing the llook and feel of components

    hi,
    i want to change the look and feel of my components. What are the available options that i can give. Anything other than alloy and metallic.
    thx in advance

    Hi,
    you should also try this link:
    http://www.javootoo.com/
    Many Look & Feels available there. However not all of them are good to use in applications. In my opinion the metal look & feel provided with Java is very nice and it can be used everywhere.
    L.P.

  • My imac intel display is frozen.  Both the mouse and my network is working.  Has anyone had problems like this and were you successful at fixing it?

    My imac (Intel) display is frozen.  Both the mouse and the network are working.  I've shut down various times, pulled the cord from the receptacle on the power strip, and restarted several times.  No luck.  Has anyone had problems like this and were you successful at fixing it?  Thanks.  Would appreciate any help.  Paula

    Same problem, but a c.2009 iMac running OS X 10.9.1. Just happened overnight. Presently, I'm able to access my HD via wireless via laptop and copying all non-backed up files to an external drive. So far, Paula is the only other person I've found with this same problem and hers was three years ago! Going to keep searching for an answer.

  • Airport Extreme and Fios.... I had fios hooked up today (Internet and phone only)... Want to my aebs as the primary and wireless network. Would someone be able to provide step by step instructions because I cannot figure it out. Thanks!

    I had fios hooked up today and am about to rip my hair out... Would someone be able to share step-by-step instructions for connecting my airport extreme base station. I want to use it as my primary for everything including wireless (fios is Internet and phone only ). ThNk you in advance.

    Thanks for taking the time to detail that. I think I have it, but I have a few things to clarify.
    1. This negates the need for the Westell Series3 9100EM, because, the "router" mentioned in the line "Hook an Ethernet cable from the ONT to the router's WAN jack" is the Apple Extreme Base Station (or other suitable router), right?
    2. I haven't got the TV portion of FIOS service, although I may add that at some point, so in my case the COAX to NIM (and the NIM for that matter) aren't needed, right?
    I see a couple of issues. One, I have COAX run for the current connection. And, two, Verizon would need to come out again to do the CAT5 configure. Can the CAT5 run be that long and still be effective? Maybe the Westell router could be used to extend the wireless network? And, if FIOS TV is added could it be used in place of the NIM (since I already have the COAX and the Westell at the back of the TV)?
    Regardless, I REALLY appreciate your help. On a side note, it's interesting that the NIM takes both the COAX and CAT5.

  • I foolishly downloaded FireFox 4.0 without check the requirements and now I can't get my older version back. I tried downloading an older version but after downloading I am asked to select an "application" for the file.

    I didn't check the requirements and lost my older version of Firefox. All I have is an icon that is crossed out. Attempts to download an older version have so far failed. When trying to install, I am asked for an "application" to run the file.

    There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Maybe you are looking for