The volume logo will not go from my iPad 3
The volume logo will not go from my screen even though I have not pressed it
Did you try restarting or resetting the iPad?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Similar Messages
-
I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?
My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive
-
My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .
Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?
The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck
-
The volume controls will not show up in the music app or I the lock screen music controls. What do I do?
OMG......THANK YOU THANK YOU......I been reading articles after articles and nothing was working......tryed the Crtl+S and there it was. I can not thank you enough......I appricate it Can not believe it was that simple. I am one happy person again.....
-
I just bought my iphone5c on ebay, but the previous owner will not remove from their account, what do i do?
You won’t be able to use it. Ask eBay for a refund.
(120398) -
After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version". Any help will be greatly appreciated.
Sorry,
Yes, the error message is exactly like that ("Database error: failured to persist version")
No photos will import at all. I use USB to import from iPhone 5s or iPad 2.
About the difference? iPhoto and Photos . Are there two softwares?
I also will like to merge and/or synchronize all my photos I had saved to iCloud backups, Macbook Pro, iPhone 5s and iPad hard drives using iPhoto. It's call iPhoto library. At one point I turned off streaming.
Thanks again Larry HN. -
I have bought a apple ipad 1st generation and I would like to put my ebooks on how would I do this the ibook app will not download on this ipad many thanks for any help offered
Try downloading the current version of the iBooks app on your computer's iTunes so that the app is in your purchase history. Then on your iPad go to the Purchased tab in the App Store app and see if you can download an older compatible version of it.
If the ebooks aren't ibooks, then unless they are digital-rights-management free epubs then you probably won't be able to add them to your computer's iTunes library (File > Add To Library) and sync them to your iPad - in they do have DRM on them then does the store that you got them from have their own app in your computer's iTunes ? If they then you could try the above and see if they have an iOS 5 compatible version available. -
TS1424 how do i remove the picture of the itunes logo and chargin cord from mu ipad? it is frozen
How do I remove the picture of the itunes logo and charging cord from my ipad? it is frozen! I was going to download the ios7 and this popped up!
The image indicates that the iPad has gone into recovery mode, you will need to do as image shows and use the cable to connect the iPad to your computer's iTunes (you will need an up-to-date version of iTunes on your computer) : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it
-
After using Energie On The Go BB will not charge from wall
My BB was out of power and I bought an Energizer Energie on the go to charge my BB and it worked fine. But since then the BB will not charge from the wall. I bought a new batery and same story. the plug con comes on when first plugged to the wall charger bt goes out in 3 sec. What's the deal? How can Fix? have tried removing battery and reseting several times but no luck.
I guess it's possible that the charger block is faulty, and maybe you had a power surge that knocked them out, perhaps the cables are good which is why they charge with USB port on computer of in a car but the block the USB cable plugs into is bad thus when using a wall outlet it doesn't charge... Have you had to reset the GFCI for any outlets in your home??
-
My printer will print pages from the internet but will not print from my files.
My printer will not print from my computer files but will print from the net. Does anyone have any idea what is going on with my printer?
Please read this post then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? What programs are you printing from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
HT1657 Rentals will not delete from my iPad - Help needed - please
I tried downloading 4 movies before a trip - 2 were successfully downloaded. The other 2 were not. So once I reached my destination and hooked up with the wifi I attempted to down load again only to be told that I do not have room. So I bought more storage only to see that the movies still will not compltely download. When I returned from my trip I plugged my iPad into my computer thinking, surely this will either get it down loaded or cleaned out of my iPad, but nope they are not showing up as a rental purchase and I still cant get the movies to download they are stuck at "Processing" about about 95% shown on the download bar. Anyone know how to fix this? Because of this problem I cant download any other thing to my iPad and I am getting super frustrated. Oh I did a hard shut down aslo... PLEASE HELP!!
After searching and searcing I found that a suggestion to:
setting > general > reset > reset location and privacy
it worked...
i just had to reinstall the app from the app store. -
I previously had an ipod nano but now have an ipod touch, when I synced it for the first time I got songs on to the ipod which I dont want, I have tried unticking them in itunes library and this doesnt work. I have also tried going to summary to remove manually but it doesnt show any songs in this box to be removed. Can anone help please.
Is your device recognized by your computer? If yes, copy the pictures and videos as shown in this article:
Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer
If it is not recognized, try this first: iOS: Device not recognized in iTunes for Windows
Disable autosync in iTunes, right click on it in the device list and choose "transfer purchases" to copy apps and other media bought in iTunes to your new library.
Do the same again and choose "backup", to create a manual backup without syncing.
Since your device will be erased due to the new iTunes library during the first sync, you can use this backup afterwards to restore your settings and data.
Set up at least one contact and event on your computer before you start, to be able to merge calendars and contacts. -
My phone is froze up all it is showing is the apple logo will not go past that???
my phone is froze up all it is showing is the apple logo it will not load past this??? what do i do???
If your phone is not jailbroken hold the HOME and SLEEP buttons until the phone resets, as long as 30 seconds. If that doesn't resolve the problem see: http://support.apple.com/kb/HT1808.
If the phone is jailbroken google is your best solution, but there may be no solution.
Maybe you are looking for
-
SSAS Multidimensional Time Intelligence YTD calculation showing BLANK for Date level
Hi there, I am working with SSAS Multidimensional Cube, basically I have defined a Time Intelligence calculations for just YTD in the Cube, the calculation was created in the Calculations tab of the cube as follows: /*Year to Date*/ [Dimension Di
-
How to get keydate properties in the report.
Dear Experts, One of my query have a Keydate Properties which promote users when refreshing data. And then in the report, when I try to use function UserResponse("dp.kd.value") to get the value of this date, the result is a nubmer such as "1249084800
-
Using @variable('BOLanguage') prompts in webi documents
Hello, I am using @variable('BOLanguage') in the universe to handle multilinguism. Unfortunately, when running my webi document, the variable prompts whereas it is a BO variable. On top of that, let us suppose, I enter "test" as a value for this vari
-
Customer credit memo can't auto calculate the net due date
Hi all, Our user used F-27 to entry customer credit memo (PK = 11), [F-27|http://www.flickr.com/photos/44956360@N08/5206144134/] and payment term use net 60 days, [F-27 - screen 2|http://www.flickr.com/photos/44956360@N08/5206144210/] but the system
-
It repreats itself from the beginning stating that firefox needs to be closed in order to continue.