The volume on my imac is working anymore

about three days ago the vomule is working, icant listen to my music or anythng

the volume on my imac became possessed. volume levels changed by themselves. finally called apple support and the problem is fixed. did a smc reboot. basically turn off computer and disconnect from power supply for
30 seconds and then restart. smc reboot seems to have different directions for different products. look it up and go to it. problem fixed. hope this works for you.

Similar Messages

I have an Iphone 3GS and the app for Facebook doesn't work anymore...

I have an Iphone 3GS and the app for Facebook doesn't work anymore since last update made yesterday.
How can I restore it without the last update?
Or, what can I do to have the Facebook back again on my mobile?
Thank you for your help.

Hi Ricoco,
I too had exact issue what you were experienced, then I went to Apple autorised service center and submitted my earpods, their it worked with all versions of Apple iphones, but it didn't worked on my 3gs. The service technician suggested for OS upgrade.Then I came home and I took the backup and upgraded 5.1 to 6.1 as he suggested, also it didn't worked. I was totally frustated and suddenly I got an idea!. What a funny thing here is, a safety pin resolved my issue, I took out all dust which was there in the jack hole. Then I check my earpods, it was amazing you know..MY EAR PODS WORKED!.
If you still have this issue, I hope this will help you.
Umesh

After the install upgrade my imac wont load anymore i tried to do a safe mode load and wehn i do at the end of it it tells me that i have a "systemShutdown false" what does this mean

after the install upgrade my imac wont load anymore i tried to do a safe mode load and wehn i do at the end of it it tells me that i have a "systemShutdown false" what does this mean

If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore.

Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore. I restored it, I backed it up and I held the power and Home buttons for the reboot and still nothing. I've been looking to see if any one had the same problem and one guy did but they tOld him it was his hardware, but I don't think it was because my friend was able to get it working but it would stop working again like in 10min. So, has anyone had the same problem and can help? Please, I will greatly apretiate it. :)

What do you mnean that the screen does not work?
When you touch the screen the iPod does not respond?
Nothing shows on the screen?
Or what?

HT4137 the volume on my iphone isnt working

the volume on my iphone isnt working, how do I fix it?

I had the same problem as well for nearly 3 months.
I had tried bring the Iphone into my phone carrier and they sent me to the AppleStore. When I brought it to them they hooked it up to the diagnostic machine and they told me just to restart the Iphone from the factory settings.
This didn't work either. To complicate things more, other "solutions" seem to only yield temporary success. These temporary solutions included: blowing compressed air into every port, various restart combinations, various factory restore methods.
I had nearly given up until I stumbled upon a support post on Apple's website that finally yielded success.
http://support.apple.com/kb/TS1630
The solution for me is listed as line 7, which reads:
"Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris."
Apparently, this cylinder shaped, mesh area is in some way tied to what triggers the headphones/speaker selection. I am not sure how, but I can say that after gently brushing it out my sounds are working again; specifically my music is now able to play directly off the speakers and my Iphone apps all play their sounds agian.
Hope this helps you as well!

The volume on imovie09 suddenly stopped working. How can I fix the audio volume?

The volume on imovie09 suddenly stopped working. How can I fix the audio volume?
I have no idea what triggered this. Other projects work with volume. But my current project will play the audio but no volume. HELP please.

How exactly stopped working? Three things to try
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

The volume on my macpro only works on earphones

the volume on my macpro only works on earphones....it even has a red light on it...

What red light? Where on a mac pro? Or are you talking about a macbook pro?

My mac won't restart, shut down, or go to sleep. And the volume and brightness does not work as well.

My mac won't restart, shut down, or go to sleep. And the volume and brightness does not work as well.

Connect the computer to the power.
Hold the power button down for 10 seconds or more.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Choosing start volume with [alt] doesn't work anymore

Hi there,
On my MBP (15" early 2011). Normally I can choose from what volume I want to boot by pressing the [alt] key right after switching on my MBP. I have OSX Snow Leo and Win7 (64bit) installed.
However since I installed the latest software updates several days ago, including a firmware update for the thunderbolt connection, the choosing of the start volume by pressing [alt] on startup doesn't work anymore: I can move the mouse, but the two volumes don't appear on the screen. All I can do is to switch off. I can however boot under both, OSX and Win7 by choosing the "restart under Win7/OSX" option in the other system respectively.
I now found out, that it works perfectly fine again when I have my 27" Apple Cinema display (mini display, not thunderbolt) connected to my MBP. When it's not connected I am having the issue.
My guess is that the thunderbolt firmware update causes this.
Anyone got an idea? It's quite a pain in the *** that I always have to start one system at first to get in the other one at the moment.
Thx

Hi Fortuny,
thx for your answer! I just have reseted this NVRAM as described in the support page, and think I have done it right. It worked as said there, I just didn't have to set any time or resolution things afterwards, as it is written there that it might have to be.
Sadly it didn't seem to help. Anyway, I do have news:
When the two volumes didn't appear again on the startup screen, I sat back and thought about what the issue could be. After approximately one minute starin on the screen, suddenly the two volumes appeared! So in fact it DOES work, just it takes about a minute now when I don't have the cinema display attached.
Does this additional info say anything to the experts out there? It's still not solved, as it is rather inconvenient to wait a minute untill I can choose the startup volume.
Thx for any sugestions!

My ipod was frozen while opening an app and it is still frozen. The volume button and time is working fine but it wont even lock or turn off. Not even close the app. What should I do?

I was trying to open facebook and it just stopped without anything really on the screen, the time is working and I can change the volume, but my friend tried to send me a message on another app and it didn't notify me or anything. I bought it used and I don't have a warrenty. Help?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Thenb the remaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why does the volume button on iPad stop working

Sound comes on sometimes works fine other times I go to change volume and it won't sound

Is there anything around the volume rocker that might he affecting how it works? Maybe some sticky substance or anything that could be causing the button to stick?
Have you tried resetting the iPad?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Can any1 help i hav Iphone4 nd the volume whn i call the volume is low i can barely hear the other person, i try using the volume key bt it dont work? help plz

Can any1 hlp i hav an IPhone4 and the volume is so low i can barely hear the person frm the other phone, i try using volume bt it dont work?

Did you try turning up the volume button on the left side, Also go into your settings>sounds and try to change the volume.

[SOLVED] How to make the volume knob on my headset work

I have a Turtle Beach PX3. It's a USB wireless headset. I got the sound working and everything and I can control the volume through the XFCE mixer or the ALSA mixer but I would like to be able to use the physical knob. On Windows 7, it just sends a signal to bump up the volume in the software mixer much like the volume controls on a keyboard would. For the short time I used Xubuntu 12.04 it recognized that I was moving the knob (it popped up a volume bar) but it seemed to be adjusting the wrong thing because the volume didn't actually change. On Arch, it doesn't do anything. I'm just did a fresh install and I'm running XFCE with just straight ALSA but I wouldn't be objecting to trying out PulseAudio or something if it would help (though I've never set this up in Arch so I may need a little help).
Last edited by weirddan455 (2012-10-09 20:07:10)

Nevermind, got my Google-fu on and the package was xorg-xev. It recognized when I moved the knob.
Here's the volume raise code:
KeyPress event, serial 38, synthetic NO, window 0x1600001,
root 0xc6, subw 0x0, time 8056414, (56,97), root:(540,575),
state 0x0, keycode 123 (keysym 0x1008ff13, XF86AudioRaiseVolume), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
And the volume lower:
KeyRelease event, serial 38, synthetic NO, window 0x1600001,
root 0xc6, subw 0x0, time 8054284, (56,97), root:(540,575),
state 0x0, keycode 122 (keysym 0x1008ff11, XF86AudioLowerVolume), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
Last edited by weirddan455 (2012-10-09 13:45:12)

Why doesn't the "zoom in/out" via pinching the trackpad on my mac not work anymore with firefox? It worked before and still works with Safari.

why doesn't the "zoom in/out" feature by pinching the trackpad on my mac work anymore with firefox? It worked about a month ago, and still works on Safari.

Some gestures have been removed in Firefox 4 and later.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

Since IOS 5 the accelerometer of my iPod doesnt work anymore, anyone knows how to fix this?

The accelerometer of my iPod Touch doesnt work anymore, it has worked perfectly, untill i updated the device to iOS 5.

Did you try to reset the ipod by holding the sleep and home button until the Apple logo comes up again?
If this does not help, try to set it up as new device without using the latest backup: How to set up your iPhone or iPod touch as a new device

The volume on my imac is working anymore

Similar Messages

Maybe you are looking for