The volume on the second half of my Quicktime slideshow fades out--and I don't want it to do that!
I used FotoMagico 4.0 to make a slideshow. There are options for exporting, and I chose the one called Custom, which makes a Quicktime movie. For some reason the volume in the second half of the show starts to fade out, and by the end I can barely hear anything. If I export to their Standalone Player, which allows the slideshow to play on a Mac computer, everything works just fine. I'm at my wits end trying to figure out how to fix this. I want to be able to export the slideshow to Vimeo so that people on Macs and Pc's can both watch it, but I can't do it with the volume the way it is.
Go to System Preferences. Then under the General tab, there is a tick box saying "Restore windows when quitting and re-opening apps." Un tick that box. Once you start and quit Safari again, it will go back to your home page.
Similar Messages
-
I just got the i phone 4 on Friday and it has shut off and not come back on twice. I was able to get it to come on by holding the top button down for a few seconds but i don't want to have to do that. Also, i am having a problem with texting, i will send a text and the person on the other end says that I have sent a blank text. Just need to know if this is something that is going to continue because if so then I will take it back and get a Droid
Assuming the phone isn't jailbroken, the basic steps (as needed) are:
Restart phone (you already did this)
Reset phone
Restore phone in iTunes using a backup
Restore in iTunes as new, without using a backup
See appendix B of the User Guide for details
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
If your phone is jailbroken, this is the most frequent cause of the problems you described. Restoring could permanently brick the phone.
Note that your iOS is old and the current version is 4.2.8. It's odd that it wasn't updated when your activated your phone in iTunes, being that you got it last Friday. -
I put my husband's apple id in when I started to set up icloud in error. I realized I needed to change this right away and tried to sign out and restart with my own apple id, but it won't let me sign out in the middle of setting up. It says something about if I don't sync documents, all documents will be deleted from this computer, but I don't want to download all his work documents. Is there any way for me to start over and fix this?
Having signed out as suggested above, go to http://appleid.apple.com and create a new Apple ID if you don't already have one. You will need a working email address which is different from that in the ID already in use.
The set up your Mac/device(s) as indicated here:
http://www.apple.com/icloud/setup/ -
the question as the title
What do you mean lock the phone? Where you using a passcode for your iphone? IF you did then your info is safe.
-
The latest update to Word 2011 changes my keyboard preferences, and I don't want it to do that
I work in two languages and I use an Italian keyboard. My normal keyboard preference setting is Italian (indicated by a little Italian flag at the right of the menu bar).
But since I installed the latest update to Office 2011, every time I open Word, it changes my keyboard preference to English (the little flag at the right of the menu bar changes to the British flag).
Is there a way to prevent it from doing this? It didn't happen before. It only happens in Word 2011 (not PowerPoint 2011 or Excel 2011)Under the Music tab for your iPod Sync preferences with iTunes, choose selected playlists, artists, albums, and genres instead of entire library.
Select the iTunes playlists, and/or artists, albums, genres you want transferred to your iPod followed by a sync. This will remove the music from your iPod that you don't want on the iPod. -
GOT THE NEW 5S. IT TRASFERRED ALL MY PHOTOS.THEY ARE STORED IN MY ICLOUD. DIDNT WANT THEM IN NEW PHONE. ALL FACEBOOK CONTACTS TOO. DIDTNT WANT THAT EITHER. I HAVAE 4000 EMAILS DO I HAVE TO ERASE MANUALLY. I WANT TO TAKE THE PASSCODE OFF THAT I INSTALLED TO MUCH OF A PAIN CAN SOMEONE HELP?
Settings > General > Touch ID & Passcode > Turn Passcode off
-
I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up and down. It will not stablise itself! It's very fustrating. Anybody with the same issue?
I have the BOSE Companion 5 speakers and have had the same problem. I've searched everywhere and gotten nowhere. My speakers are way past their warranty, so calling Bose would probably get me no where either. Only thing I can think of is that the speakers overheat which causes the spikes in the volume. I've tried unplugging them for a few minutes and then plug them back on. The problem does go away, but after about 5 minutes, same problem.
-
IPad is connected to a stereo installation - no control of the volume by the iPad
When my iPad is connected to a stereo installation, there is no possibility anymore to control the volume by the iPad.
'the volume control' is replaced by 'dock connector' on the iPadThis issue manifests as The volume control shows sound effects on screen or phantom docking no volume slide control.
For the beginners, the issue is often the side switch is set to mute on off and not screen rotation lock. The switch is off. (see settings)
Other issues around software and airport use can be resolved by hard reset, or reset options inside the settings. I use AIRPORT all the time.
You may have even tried the re-installing the firmware/ios
So when all has failed to work, the you may have dock connector PIN 21 problem.
I had an issue that started with the ipad whe it was on USB cable to PC.
No drop, no sudden cable movements. Just gone....
No volume slider. IPAD behaves as if it was docked when not.
Slight movement when usb cable is in occasionally brings the volume control back but only for a few seconds then it disappears.
Mine is going back for repair/replacement.
cheers Phil -
I can't change the volume of the background music in my project even if I put it to 0%
I can't change the volume, I've tried to put it down with Itunes, stop and start again my computer but nothing work... PLEAAAAAASE HELP...
Solved it, there was a problem of the same music put it twice!
-
My ipod 5th gen won't let me adjust volume when headphones are plugged in, but when they are not I can adjust the volume on the speaker. How do I fix this?
Try a hard reset of the Nano. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
I assume you have double checked to make sure you are plugging the headset all the way in meaning the white part of the headset is flush with the body of the Nano?
B-rock -
Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.
Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software. -
We are recording 2 voices over an instrumental track. Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases. Is this fixable? We are using Alesis multi mix 8 with 2 microphones.
Badger33rk wrote:
Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases.
turn the Ducking menuItem off -
How to find out the volume of the data updated in the custom table
Hi,
I need to find out the the volume of the data inserted or updated in the the custom table(Y tables).I have tried by the sm37.the job running in to update the table but i didnot get thde amount of the data.and if get the volume of the data which being updated in the custom table is there any option to control that amount to being updated?
Thanks in advance .....waiting for the respone.Hi Sreenivas.
How did you find the solution to this? Trying to do the same thing!
Cheers,
Tom -
I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?
rickeyt
Thanks for the reply. Great news about the volume adjusts.
Now about those fades for the volume. How are you doing that?
1. Right click the Timeline video audio and select Fade and then
see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
Please let us know if any of the above works for you with regard to the audio fades.
Thank you.
ATR -
How do you lower the volume on the dictation beep sound?
Hi there,
I like using the new iPad's built in dictation feature. But when I use it, I find that the alert beep it makes when you start and stop is quite loud, and I don't know how to turn the volume down. All of the other sounds on the my iPad are turned down.
Thanks!I've tried this, but it doesn't work. Does anyone not notice the disparity in the volume of the dictation beep and all other alert sounds on your iPad? It's a loud beep. I have my alert sounds turned right down (still audible, but very low.)
(But thanks Diavonex!)
Maybe you are looking for
-
My ipod reset itself it would not let me log into my old itunes account so I made a new one how can I get to all my music and stuff.
-
Why aren't my text captions being read by JAWS 14.0?
Hey All, I need some help. I'm running Captivate 7 and I'm trying to make it accessible, specifically to JAWS 14.0. I've done some research and it seems as if I've followed all the steps necessary to achieve this, but when I view my project none of m
-
Problem with a link in a number-column
I use Apex 2.2 in German Version. In a report there is a column containing numbers (7,2). For this column I installed a link to a cell from a tabular form. When there is a number like 1234,56 the result of the link in the tabular form is 1234. The af
-
Blend Mode Selection in Photoshop minor difference between platforms
Guys you REALLY need to do something about this asap. I don't know if it's a mac/pc problem or if it's a CS6 problem. I have been working with photoshop on PC for the past 9 years or so. I recently had to switch to CS6 on Mac. I can no longer place m
-
Hi to all, My query is how to access a internal tables's field through field symbol. What is the syntax and different methods to do this. Also tell me the use of field synbol in real time. Thanks..