The wall plugs keeps failing on my itouch

Bought the wall plug from apple, after 2 month it no longer works. Are there any issues with this item

There shouldn't be any problems with the plug. There might be a problem, and you can bring it to the Apple Store you bought it from, tell them that it has stopped working with your iPod (bring it with you), and they can help you fix it.
Before you do that though, try simple things. Turn your iPod off, wait a few minutes, plug it into the charger and turn it on if it doesn't automaticly. It that doesn't help, reset the iPod (not the way that deletes everything) through iTunes and see if that helps. If that doesn't, you can try reformatting it and replacing all your apps, or you can take it to the Apple Store.
I'm not sure if it came with a warrenty when you bought it, but if it did, you may be able to get a replacement for free. If not, you may have to buy another one if the folks at the Apple Store can't fix your problem.
Good luck!

Similar Messages

IPAD 2 Won't Charge on USB port on my laptop, my desktop Mac but will charge via the wall plug

I am confused on what to do with my IPAD 2. It won't charge via my USB Port on my PC that I travel with. Also I just purchased a new desktop Mac and it will not charge on that USB port either. But it will charge via the Wall Plug that came with it. I am worried when I travel to different countries to use the wall plug. I have an adapter to switch power. I am from Canada and travel oversees where the power is 240 vs the 120 at home. If I use my plug adapter and plug in my ipad to the wall Will I destroy the battey in my IPAD 2. I love my ipad to travel with but it is very frustrating when it will not charge on my PC or on the airplane. Then I am afraid to use the wall plug in the airport because of the difference in power. Would really appreciate some help here because I am oversees 2 weeks a month and only get a couple days use of my IPAD. I have all my books and everything on it and need to be able to recharge it. Does anyone have any suggestions?
Thanks
Confused!!!!

For better future reference, you should be aware that the voltage means nothing when it comes to charging power. All that that is telling you is that the Power Adapter will work across that voltage range, i.e., you don't need a transformer to plug it into the outlet (although you may need different plugs, which is a separate topic).
What matters is the amperage (A) and the power in watts (W). The Power Adapter puts out 2 A @ 5 VDC (volts DC), which means it's producing 10 watts of power. It will output that across the entire voltage range.
A high-power USB port on a PC will put out 0.5A @ 5VDC, or 2.5 W. Be aware that not all of the ports on any given PC are likely to be putting out even that much power, at may well be putting out less than half as much. That's why you'll often see the "Not Charging" when plugged into a USB port, especially on Windoze laptops, and why it will charge very slowly even when it works.
FYI, the charger which is sold with the iPhone looks identical, is called the same thing, but only puts out 1A. It will work on the iPad but will charge more slowly. By that same token, the iPad charger will charge an iPhone just fine, it will just charge faster.

I have a ipod nano 4th gen. and it wont connect to my computer at all and I tryed to reset it but its been 10 minutes and iit wont go back to normal. It is charging fine when I use the wall plug. I need help!

I have a ipod 4th gen and it wont connect to my windows computer at all. I've tryed to reset it but its been 10 min and it wont go back to normal. I use the wall plug in to charge it. also it wont charge on my computer but other wise it works fine. I need help!

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Droid Ultra has suddenly stopped charging from the wall plug-in

My Droid Ultra has suddenly stopped charging from the wall plug-in. I've tried every charger in the house. I've tried to plug it into a wall charger at work in case there may be an issue with my outlets at home, but it won't charge from a wall plug-in from any location. However it will chage if I plug it into the computer or my portable battery charger. Any ideas why it won't charge from a wall plug-in and how I may fix it?

Let's get your phone charged, chaseperil! You stated that you have tried every charger in your home. Have you tried the whole charger or just the cable? We want to make it is not the plug part of the charger. Are you using the charger that came in the box?
RobinD_VZW
Follow us on twitter @VZWSupport

Meaning of the wall-plug icon while in charger

Hello !
When I charge my iPhone it first has the lightning bolt while charging, then switches to the wall plug icon when its charged. When I leave it this way, the battery depletes slowly just as my macbook does until it reaches about 93% then the lightning bolt is displayed again indicating its again charging to 100%.
Ok so here is my question: When its finished charging and the wallplug icon is shown, does the iPhone still get some "small" charging current to slow down battery depletion or nothing at all? Or in other words: Does it make a difference when I take the phone off the charger as soon as the wall plug is shown compared to leaving it in the dock?
Kind regards,
Sascha

OK, please let me rephrase what you said (this helps me to check if I understood ):
The lightning bolt changes to the wall plug when charging of the battery is complete. At this time, the battery is internally disconnected from the phone and the charger.
From this point on the operation of the phone is entirely maintained by the charger as the battery is not "connected".
Even while the battery is not connected it will slowly deplete due to internal leakages and other chemical processes.
As soon as these internal leakages drop the battery level under a certain percentage, the phone connects the charger again to the battery and charges it back to 100%, then disconnects the charger again.
When the charger is disconnected from the phone, the phone connects itself again to the battery to power the phones normal operation by the battery.
Right?
Correct me if I am wrong, but this means, that it is totally harmless for the battery if the phone is left in the charger, as the battery is only charged when the internal processes dropped the charge level under about 95% which does not occur often, and in the meantime the phone is powered by the charger.
By the way, when left in the charger my 4S needs about 2 days to drop low enough to be recharged, thats about 93%.

My apps on the creative cloud keep failing to download

my apps on the creative cloud keep failing to download

Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

We cannot get our Ipad Air to charge. We have tried the wall plug and the computer plug in. It just gives us a message saying it's not charging.

We cannot get our iPad Air to charge. We have tried the wall plug and the computer plug in. It just gives a message saying it's not charging.

Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Why does the Adobe Updater keep failing?

Why does the Adobe Updater keep failing? I close my Webroot antivirus app and the update keeps failing for the Extension Manager 6.0.8 Update. The message is "Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7". I cannot retry until the Adobe Updater appears again in the notification bar (lower right of my Win 7 desktop.

Hi,
You can try to manually install the updates:
Product updates
Helpful Links:
Installation failed. Error U44M1P7 | Updates
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html

Photoshop CS4 for Mac What can cause the error: Plug-in failed to load - NO VERSION

With Photoshop CS4 for Mac I install the Kodak Plug-in DIGITAL GEM Airbrush Professional v2.1.0. When Photoshop starts I get an error:
Plug-ins that failed to load:
   DIGITAL GEM Airbrush Professional v2.1.0 NO VERSION - - from the file “DigitalAIRProv2.plugin”Flash:
   Connections
   Kuler
This plug-in works fine on my Mac Pro with Photoshop CS4 and OS 10.6 but fails on a new Macbook Air.
Reinstalling the plug-in did not make any difference. What can cause this error?

Thanks Chris, That was my first thought too but this same plug-in works on another installation of CS4. This is a Mac installation and the plug-in is Universal so it should work. Is there any other possible cause for this error? Would Photoshop refuse to load a plug-in in a low memory situation?
Also, The Flash extensions:Connections and Kuler are working OK, I just copied a little more out of the System Info report than I needed to.

Mag Safe plugs keep failing

I've had my Macbook for 3 years, each year I have to buy a new mag safe power adapter. I'm not some extreme user, the connection between the coupling and the cord is incredibly poorly designed. I had a PowerPC powerbook 12" before and never had a failure. My computer (and mag safe) goes to the lab and back home and that's it. Do these plugs have a warranty? I'm on my third one and it is starting to fail the same way (where the cord meets the magnetic plug at the computer). At least time it's less than a year old, if there is a warranty.

this is amieagain....i hate that half the time this site rejects my original amieagain username and other times it takes it....but that's another issue all together.
i don't pull my plug out wrong.
i brought it to the apple store.
the had to reset it by holding option, command, delete and the off button at the same time. it worked. i think it's BS that this happens this way to me all the time, but what can you do? it has never happend to my daughter and her macbook...but i have a macbook pro....

HT3046 I have a Powerbook G4 that I have not used for a number of years. I believe there are photos on it that I want to retrieve. The unit will not power on and there is no evidence it is alive. Neither the wall plug in or a new battery helped. Sugge

My G4 will not power up. I installed a new battery and still nothing. Help.

Try taking out the main battery and letting the PB sit turned off but plugged into wall power for 24-48 hours. Then reinstall the main battery and try a start.
When you try to start it, do you get any sounds, like the Mac "chimes" or hear the hard drive or optical drive spin up? If you get those sounds, try holding teh SHIFT key during startup; keep holding until you see a desktop and then lt go the key. Don't try using the comptuer at this point--it won't have all needed extensions loaded. Simply try a normal start to see fi that gets a regular desktop,
Do you have the system install/restire disks that came with the computer, or retail install disk? Both are bootable. Try booting from one of those optical disks. Hold the c key to force booting from the optical drive.

My iPad 2 won't charge when connected to the wall plug

I have plugged my iPad into many different USB cords and it will not charge. It charged fine a few days ago and I also plugged it in to different walls ports too.

Have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

WHY DOES THE PE EDITOR KEEP FAILING TO LOAD

I have a brand new problem with Photoshop Elements 8, which I've been using in Windows for several years.
Suddenly the PE editor refuses to load--either from "Fix" in the album space or from "Edit" in the Workspace. It starts to load (with the green dots moving across the bar) and then kicks out. Even after I signed in successfully to PE, the editor still fails to load. Any suggestions?

One easy fix for Adobe programs is to Reset Preferences = Press/HOLD Ctrl+Alt+Shift while starting program
IF your problem is a corrupted preferences file, this is the fix

Reset the PMU/firewire keeps failing after a bit

Ok, originally I was having trouble with a bunch of different functions after I replaced the internal battery and finally came to the solution of resetting the PMU button. I was experiencing trouble with the firewire ports before i reset everything also. Now all I have trouble with is the firewire ports not recognizing my external hard drive after I shut it down plug in another firewire device or audio front port device. I'm not sure what else i should do to resolve the whole issue. Help!?

Resolved!!! I followed the advice of article HT1939 about "Resetting Cuda/PMU on Power Mac": Disconnect ALL cables from the computer, including peripherals and power. I have disconnected the power cord last night and this morning I have pressed the Cuda button ONCE as described: do not press the button more than once before starting the computer up again. But the PM did not startup. I have opened it again and I have pressed it again once. PM MDD started fine, both the external firewire HD are correctly mounted on the desktop, but no internet connection. I have restarted with OS 9, opened I.E. 5.1 (how flashback!), internet started to work again as yesterday but now with the firewire HD on the desktop (thank you OS9).
Rebooted Leopard, now it is everything fine (net connection, firewire)
Hope to help you.

HT201109 Final Cut Pro X - Why does the trial version keep failing?

Process:         Final Cut Pro Trial [4005]
Path:            /Volumes/VOLUME/Final Cut Pro Trial.app/Contents/MacOS/Final Cut Pro Trial
Identifier:      com.apple.FinalCutTrial
Version:         10.0.8 (221398)
Build Info:      ProEditor-22139008018000000~2
Code Type:       X86-64 (Native)
Parent Process: launchd [144]
Responsible:     Final Cut Pro Trial [4005]
User ID:         501
Date/Time:       2013-12-21 00:01:58.489 -0500
OS Version:      Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: 010133C7-71FE-7E00-B668-9077858DDF11
Sleep/Wake UUID: 5697EF8F-BAA6-42A2-91C1-DF989828B00C
Crashed Thread: 2 BGTask: FFThumbnailRequestManager Dispatch queue: NSOperationQueue Serial Queue
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
ETc......

the trial has no length limit.
my assumption:
you try to handle wmv material, using the flip4mac plugin
its free trial has a length limit.
purchase a licence …

The wall plugs keeps failing on my itouch

Similar Messages

Maybe you are looking for