The Watch and Gun Control

Just read that Eric Holder is looking for some sort of electronic device to let only the owner of a gun is able to use it. Could the new Watch and/or the iPhone be used to send a signal to the gun only if the owner is wearing the Watch? Kind of an electronic lockout system.

As the Apple Watch hasn't even been released yet, it's not possible to assess it's complete potential. Also, based on what you wrote, this Eric Holder person is still developing their product.
You can certainly submit feedback to Apple here:
http://www.apple.com/feedback

Similar Messages

Thereis no sound on my macbook air. I have checked the volume and mute controls and the internal speaker are selected. any one any ideas please.

there is no sound on my macbook air. I have checked the volume and mute controls and the internal speaker are selected. any one any ideas please.

Hopefully one of these steps should solve the problem.
1. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
4. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
Best.

My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

Hi Ron.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Projects are nt populating in the provider and receiver controls Lov

Hi ,
I created intercompany projects and while updating the provider and receiver controls , project are not populating there , i checked the all the necessary details and they are fine with me , any help on this .
Regards

Hi
Check the setups once again
Provider and receiver controls, Intercompany setup at IMplementation options
Projects (intercompany) both provider and receiver
Thanks
Krishna

Can I run with the watch and track distance and speed without my I phone?

Can I run with the watch and track speed and distance without being close to my iPhone?

You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

JRE Cache ignores the "Expire" and "Cache-Control: no-cache" directives.

My applet is using HttpURLConection to retrieve data from a server with Caching enabled. The cache contents are "revalidated" (via "if-modfied-since") each time the applet is started. However, subsequent requests to retrieve the same resource are always read from the cache with no validation even if the resource has expired.
The server is sending a valid "Expires:" tag and "Cache-Control: no-cache" tag in the response; but, the JRE refuses to recheck for an updated version of the resource even after the file has expired.
The JRE does seem to understand the "Cache-Control: no-store" tag; but, this is inefficient (no caching at all) when I'm tring to get it to not refetch the resource unless there's a change. Is there some other tag that the JRE is expecting to see?

I have a similar problem except that I want my pages to not cache at all. The server is setting the Cache-Control: max-age to 0 and the Expires to "now" but JRE seems to ignore these settings, but only sometimes. Sometimes pages are fetched from cache and sometimes from the server.
In my applet I'm using a normal URLConnection like this:
URLConnection uc = new URL("http://<server>/method").openConnection();
uc.connect();
InputStream is = uc.getInputStream();
is.read();When my request headers look like this:
accept-encoding: gzip
Host: <server>
Cache-Control: no-cache
Pragma: no-cache
User-Agent: Mozilla/4.0 (Windows XP 5.1) Java/1.6.0_13
Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Connection: keep-alivethe page will not be cached and is requested again but this time without the accept-encoding, Pragma and Cache-Control. The adding (and removal) of the headers seems to happen inside the JRE, though. I'm not explicitly setting them.
The response header of the first request looks like this:
HTTP/1.1 200 OK
Date: Wed, 20 May 2009 12:55:07 GMT
Server: Apache/2.2.11 (Win32) mod_jk/1.2.26 PHP/5.2.8
Cache-Control: max-age=0
Expires: Wed, 20 May 2009 12:55:07 GMT
Vary: User-Agent,Accept-Encoding
Content-Encoding: gzip
Keep-Alive: timeout=120, max=79
Connection: Keep-Alive
Transfer-Encoding: chunked
Content-Type: text/html;charset=iso-8859-1When the request is made with this header:
User-Agent: Mozilla/4.0 (Windows XP 5.1) Java/1.6.0_13
Host: <server>
Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Connection: keep-aliveThe response headers looks like this:
HTTP/1.1 200 OK
Date: Wed, 20 May 2009 12:55:07 GMT
Server: Apache/2.2.11 (Win32) mod_jk/1.2.26 PHP/5.2.8
Content-Length: 1016
Cache-Control: max-age=0
Expires: Wed, 20 May 2009 12:55:07 GMT
Vary: User-Agent,Accept-Encoding
Keep-Alive: timeout=120, max=83
Connection: Keep-Alive
Content-Type: text/html;charset=iso-8859-1And in this case the JRE sometimes fetches the request from the server and sometimes from cache. I have not been able to determine how the JRE decides to refresh, or why it sometimes sends an accept-encoding and Pragma header and sometimes not.
any help would be appreciated.
Alex

Where are the Brightness and Levels controls?

It's so simple, but it's late at night (early hours of the morning actually) and I'm stuck!
The most basic of controls . . . . Brightness, Contrast, Levels etc. I just cannot find.
Where are they?
Anyway, I'm off to bed.

Looking back to the old FCP, the Brightness filter was pretty appalling as it really upset the contrast etc. and it required complex fiddling with the other controls to get a semblance of balance back.
Then a year or so ago someone made a new free Brightness plugin that not only adjusted the brightness but automatically compensated the contrast controls so everything looked great.
I can't remember the name of the creator or the plugin.
It might be Luca and this, but I can't be sure.
http://www.videonline.co.uk/Lucas_Image_Adjust.htm
It's a pity that FCP X hasn't got a similar effect.
The following adjustment gave the images a nice lift and kept everything pleasant to view.
Highs +10%, Mids +5% and Shadows +3%
Message was edited by: Ian R. Brown

After adding list view into the web part page, the items and list control ribbon is not activated.

I created new webpart page and added one list view web part into the page.
However I can see the ITEMS and LIST tabs on ribbon area, but all the buttons are deactivated.
Do I have to activate any feature for this or any settings are needed for the webpart?
I already have full permission for this site.
For your easy understand I added the screenshot.

Thanks for you advice.
However I am currently using the context menu and edit link in the view.
My Client keep complaining about the ribbon is not activated even thought it works fine in the SharePoint 2010.

Want to use parental controls to prevent myself from being able to be on certain websites, but i can't do so on my account because i'm the administrator and parental controls don't work with the administrator. How can i do this?

go on certain websites, but i can't use parental controls on my account because i'm the administrator. How do i prevent access to websites?

Thanks for the reply, BUT --- i can't fool myself. I can make all the other accounts i want, but i'll still be able to get into the admin account and therefore have access to the websites i don't want to have access to. Is there a way to block websites from ALL accounts?

Windows 7 "Dim the display" and brightness controls missing

Is this another driver problem? I would think the Nvidia drivers would support this new feature in Windows 7.
http://www.technospot.net/blogs/windows-7-automatically-dim-display-screen/

I suspect you need another driver (not the video card driver) since these function require control of the backlight. It seems Apple does not provide a standard driver that can be used by Windows as the display brightness can only be controlled through Apple's bootcamp drivers in the bootcamp control panel or using the keyboard shortcuts.
Even in Vista, if you go to the Windows mobility centre (Win+X)there should be a panel for display brightness. This panel is missing in bootcamp, suggesting the necessary drivers are missing. This is a shame, but I wouldn't hold my breath for Apple to ever provide these. Then again, I didn't think Apple would ever fix the touchpad drivers for Windows, but they seem to have finally done so in the Bootcamp 3.0 beta drivers, so maybe someday...
Windows 7 also supports automatic brightness changes based on an ambient light sensor, but again, no appropriate driver supplied by Apple...

I'm mixing tracks together and can't work out where the volume and BPM control for each Track is located

Which Table would be the best for mixing tracks together? I've been off the game for a bit and have forgotten, but last time i made a good mix tape from the New project table....
Where do i go to match up the BPM for each track i lay to match up?
How do i get the Volume line to pop up on each track so i can fade accordingly?
Thank you to those who can help out

The correct way to target instances m1 thru m10 using bracket notation would be...
this["m"+i]
or even more correctly...
this["m"+String(i)]

My mom forgot the restrictions and parental controls passwords on my iPod touch. Is there a way we can figure it out or something like that?

I really need help please help

- If you are up to file manipulation see:
How to reset forgotten Restrictions...: Apple Support Communities

Can i connect my Pebble watch and hands free in my car at the same time?

Hey guys,
I am thinking of buying a pebble watch,i'd like to know if it will be possible to have the watch and my handsfree in the car connected both simultaneously via bluetooth? Any input is appreciated ! cheers

Should work fine; my boyfriend has a Pebble and a Ford...Escape, I think? And he hasn't had any issues with having both connected.
I don't think you'd be able to pair, say, a bluetooth headset or similar and your handsfree system since they're similar devices (both have speakers/microphones). The Pebble is a different type of device so you should be good.
~Lyssa

After moving and resizing control, some controls don't redraw properly as the cursor passes over them.

I have a top-level VI with three panes (two splitters). One of the panes contains nested tab controls. One of the tab pages contains six XY-graphs, a table and some decorations.
I use a subVI to resize and relocate the tabs and contained controls. All this is working fine, and everything looks fine after the resizing is complete.
The problem is when the cursor passes over certain controls (the chart legends and the table column headers for example), they redraw with gray boxes. The problem only occurs after enlarging the window from its minimum size. It goes away if the window is resized back down to minimum.
Anything that causes the window to redraw, like another resize or minimize/restore, properly refreshes the screen.
Has anyone seen this problem, and have a workaround?
The problem exists in development environment or built in LV 9.01 or LV 2010.
Thanks!
Matt Dennie
Attachments:
Resize Redraw Problem.zip ‏125 KB
Resize Redraw Problem.JPG ‏210 KB

Thanks again for taking a look at my problem.
force redraw - This is apparently only available in LV2010. I did give at a try, but it did not prevent the problem, nor did it correct the problem once the gray boxes appeared.
disable updates (on a graph) - This apparently only applies to 3-D graphs, which is not what I am using in this case.
disable front panel updates - I tried disabling updates before moving/resizing the front panel controls, then re-enabling updates afterwards. The problem is exactly the same as before. Once the move/resize is complete, passing the mouse over the table column headers or the graph plot legend results in the gray boxes.
I would appreciate any other suggestions you may have.
Again... the problem is not that the moving and resizing don't work. They work fine. But once the resizing is complete, passing the mouse over the legend or table column headers causes gray boxes to appear.
Thanks!
-- Matt

How do I use my iPad as the display and input device for my Mac Mini?

I plan to have the following stereo configuration:
Integrated amplifier with USB input that supports up to 24/192 audio, the Peachtree Nova 125
Mac Mini with USB connection to amp, wifi to the Internet, housed in the equipment cabinet with the integrated amp, no other music source. No display or keyboard connected to the Mac Mini.
I would like to use my iPad as the display and to control the Mac Mini to run Pandora, iTunes, Spotify, podcasts, etc.
Anyone have success with this general configuration?

You need a set of apps (one for iPad and another for computer) like Team viewer or Go to my PC

The Watch and Gun Control

Similar Messages

Maybe you are looking for