The watermark on export function no longer works...

The watermark on export function no longer works... and when I go to edit the watermarks, it closes out the edit watermark window.
Any suggestions?
-Sean Rayford

Hi - Not sure there is a lot you can do, unfortunately. With that said, I'd definnitely do a reset of the printer:
Press the Power button ( ) to turn on the product.
With the product turned on, disconnect the power cord from back of the product.
Disconnect the power cord from the wall outlet.
Wait at least 90 seconds.
Connect the power cord into wall outlet.
Connect the power cord to the back of the product.
If the product does not turn on by itself, press the Power button ( ) to turn it on.
Try the touchpad.
One other thing to try, disconnect if from the computer/router, power it off and see if you have the same problem. If you're still seeing the same issue after following the steps listed above, it would likely need to be serviced if you want the touchscreen fixed.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Similar Messages

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

Zap the PRAM and Reset the SMC, then try again.

I recently upgraded from Firefox ESR version 10 to version 17.0.7, and the Serch by Name function no longer works.

I was using Firefox ESR 10.0.11 and was forced to upgrade to 17.0.7 yesterday, even though my cfg file is set to not allow updates. Since the upgrade, the Search by Name function has stopped working, i.e.: I used to be able to type "yahoo" into the address bar and go straight to yahoo; now, when I type anything that is not a complete URL into the address bar, it goes to allied.com. I have already gone into about:config and changed keyword:URL to http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= and have also installed the Search By Name add-on. Neither of these work. Please help me.

Thank you for your reply. However, had you read my issue in full, you'd have noticed that I have ALREADY downloaded and installed the "Browse By Name" add-on, and it DID NOT work.

Apple Color Picker Erase Swatch function no longer works.

It was always possible to erase one of the swatches in the ubiquitous Apple Color Picker by dragging a white square over the swatch square you wanted to erase. Now that function doesn't work anymore. Very odd. You can add new colors as always, you just can't erase them. In any application where I use the Color Picker this function no longer works. For example Pixelmator, Rapidweaver, etc.
Any ideas?

Sorry, I read too much into it. I guess I couldn't imagine it was just scrolling. I was thinking you were talking about going from page to page with a swipe gesture.
Given that, their software is either broken or something is interfering. Any other programs have a problem with two-finger scrolling?

I cannot get my e-mail to automatically enter addresses in the "TO:" box. In the past, I would get a list of e-mail recipients to appear when I typed 1 letter. That function no longer works. Do I need to change a setting or what?

I cannot get my e-mail to automatically enter addresses in the "TO:" box. In the past, I would get a list of e-mail recipients to appear when I typed 1 letter. That function no longer works. Do I need to change a setting or what?

Settings > Store > Sign Out.
Sign in with the correct ID.

TS3581 iPhone 4S - The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works. Has anyone else experienced this problem?

The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works and it plays Albums or Genius Playlisys only (not self-made playlists). Has anyone else experienced this problem?
Previously, the iPod function enabled one to see the track that was playing and control playback (such as repeat or shuffle) via the iPhone screen. Now all I see is an "Accessory Connected" message.

Somewhere in there, is there a question for us, your fellow users in these user to user support forums?

I recently did the update and my text message notification was no longer working. Then I did a reset and now my locking function no longer works. What is going on???

I recently did the update and my text message notification was no longer working. Then I did a reset and now my locking function no longer works. What is going on???

What "locking function" are you talking about?

The function of the F keys at the top of my keyboard no longer work as they used to. How do I restore their old function?

The function of the F keys at the top of my keyboard no longer work as they used to. The actions they do no longer correspond to the symbols that are printed on them. For example, the volume buttons no longer control volume and now change the display to full-screen instead, and the brightness buttons don't do anything at all.
This started today and I'm finding it very irritating. I checked in System Preferences and didn't find any obvious way to turn most of them back to what they used to do.
Help?

In System Preferences > Keyboard uncheck Use all F1, F2, etc. keys as standard function keys.

Since downloading ios 7, the microphone function no longer works.

Since downloading Ios 7, the microphone function no longer works even though it is enabled in settings.

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

Scan function no longer working on my Printer

Recently moved locations and had to re set up my PC. Since then the scan function no longer works. I get the error message "Scanner reported an error", "Failed to open a session on the device". I have uninstalled and reinstalled the HP drivers, i have checked the internet connections and all are working. Actually have had a lot of troubles earlier with the rinter and the scanner re wireless connections but hoped to have finally overcome these.
Not part of the problem but a real gripe as to what is the purpose of wireless devices when they never work as well as the ethernet connected devices, someone really needs to get this sorted <gripe over>.
Can anyone help me please to get my system back up and running. I surgent now as currently on paternity leave and need to get some administrative issues doen from home in the next couple of days.
Many thanks,
This question was solved.
View Solution.

StevieDoug,
Thank you for trying my recommendations, I believe this is a wireless issue. Let's go ahead and start troubleshooting the network:
I would like you to shut down the Router, Printer and Mac in that order. Wait atleast 60 seconds, then power on the items in the way they were shut down. Re-attempt the scan. Was this successful or are you still getting the error message?
If you are still getting the error message, let's try Pinging the Mac and testing the connection, click on the link below:
How to Ping on Mac OS
If pings are successful the issue is not likely communication, instead it is probably a firewall blocking the scanning communication. Continue below:
To turn on firewall protection:
1. Choose Apple menu > System Preferences, click Security, and then click Firewall.
2.   Open the Firewall pane of Security preferences   
3. Click the lock icon to unlock it, and then type an administrator name and password.  
4. Click Start to turn on Firewall.
To allow only specified applications and services to connect:
1. Click Advanced.  
2. Click the Add (+) button, and then select the application or service in the dialog that appears.
Are you able to complete the scan? Please let me know the results!
Thanks again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Acrobat 9.0 - "attach to email" function no longer works (Win 7, MS Outlook 2010)

Dear All,
All of a sudden, my "attach to email" function no longer works. If I open a PDF in Acrobat 9.0, and I try to "attach to email," nothing happens. This feature has always worked for me in the past. When I check for updates, Acrobat reports that I'm up to date. I recently updated Flash Player 16 and Reader XI (11.0.10).
My OS is Windows 7, 64 bit, and I use MS Outlook 2010.
Thanks so much for your time.

Hi rlee711,
You might need to refer this kb file to resolve the issue:
Attach To Email doesn't work | Acrobat 9.4.2
Although, Acrobat 9 is not compatible with Outlook 10, I would like you to prefer using only the supported product.
To understand in detail, please refer the link given below:
Compatible web browsers and PDFMaker applications
Regards,
Anubha

Mac Yosemite 10.10.2 -- System Pref. Java pane/ctrl-panel, Update-tab-function no-longer works, after updting to Java 8v40

Under the Mac Yosemite 10.10.2 O.S. -- the System Preferences: Java pane/ctrl-panel: Update-tab-function no-longer works, after updting to Java 8v40 JRE & SDK -- says that the internet connection is not valid !

A few questions....I assume your network is connected to the Internet? Do you use a proxy? If so, is it set in the browser or in the Java Control Panel?
-Roger

Places function no longer works on iPhoto.

My Mac has OSX 10.6.8 and iPhoto 8.1.2. The Places function no longer works. I can select Places that I used on earlier photos, but it no longer locates new Places on the map. I have read other people's discussions of this problem on the web, but I am not technical and do not understand much of what they say. Any suggestions for a no-technical person would be welcome.

I have this same problem on my new MacBook Pro. The biggest problem is that the embedded Google will NOT find most things that Google Maps finds. For example, the Oberoi Amarvillas in Agra India.
I also can't move the pin for any of the places it already knows. I wonder if this might be related to trackpad settings? I can't find one that looks like it might help.
I can find locations using their map coordinates (for example, 27.168647, 78.049150) and then go back and rename the place to something more helpful. But I can't fine tune the size of the location, which makes it hard to have highly localized places. And it gets the name of the state wrong, which makes it hard to find locations by general location.
This puts a damper on processing photos right away, if I can't record them while I still remember their locations.

Send link function no longer works after last update (7.0.1). Has always worked till now. Outlook is set as default email (as before).

Send link function no longer working since update to 7.0.1. Always worked till now...I use Outlook as default mail client, and have not changed any settings since original setup. This is very frustrating! Any help will be appreciated.

You can try running the combo updater over your install but you might need to re-install Lion. Both options should not erase your data but if you do the re-install of Lion it's recommended that you backup first as a precaution.
OS X Lion Update 10.7.5 (Client Combo) 1.91 GB
http://support.apple.com/kb/DL1582
To re-install, boot into the Recovery drive and select to Reinstall OS X.
Hold down Command R when restarting to enter Recovery drive.

Since upgrading iphone to ios5 the kodak pic flip app no longer works any ideas

since i installed ios5 on to my iphone 4 the kodak pic flip app no longer works when i send to printer readout on printer screen says receiving then says
cancelling then ejects a blank sheet of paper .
`The app worked fine before upgrading the iphone ....help

About what?
Apple can do nothing about a 3rd party app not functioning properly. Testing and any required updates for an app is the app developer's responsibility.

The watermark on export function no longer works...

Similar Messages

Maybe you are looking for