The way to solve the problem of AppleSyncNotifier.exe error with itunes9.1

question:
Apple update to itunes 9.1 ,windows os start show Error :
"AppleSyncNotifier.exe - Unable To Locate Component",
"This application has failed to start because iconv.dll was not found. Re-installing the applicaion may fix this problem."
The way to solve the problem :
Download iconv.dll file ,and copy iconv.dll file to c:\windows\system32 ,it's all working.
http://www.dlldump.com/download-dll-files_new.php/dllfiles/I/iconv.dll/1.9/downl oad.html
iconv.dll download url
wish everyone successful

The ND is not the problem, the shooter is for under-exposing...ND or not.
Capture/convert the video to the highest-quality that you can. If all you can do is DV50, that will be okay. Make sure you use a video codec with a 4:2:2 color profile (like DV50). You will get better quality from the color-correction by using higher-quality video, like DV50, which uses twice the color information than DV25 (miniDV) to store color values.
Try the 3-Way CC and raise the gamma (middle slider) until you can't bear it anymore. Then raise the Saturation in similar fashion as the Gamma; they don't necessarily have to be the same levels. Tweak the Blacks and Whites if desired. You will have grain/video noise in the picture (as if the gain was turned up on the camera), and there are third-party filters out there for reducing that noise, but there's not much more you can do.
tim
Message was edited by: ADCNR_Tim

Similar Messages

  • Regards, since I upgrade to IOS 7 I can not open Itune Store from my Iphone 5. which is the way to solve this problem?

    Regards, since I upgrade to IOS 7 I can not open Itune Store from my Iphone 5.
    which is the way to solve this problem?

    You've tried logging out of your account by tapping on your id in Settings > iTunes & App Store and logging back in, and/or tried a soft-reset of the phone ?

  • ICloud backup failed on my iPhone 4. Is the way can solve the problem?

    Troubleshooting specific alert messages
    Note: If you have trouble remembering the text of any messages you receive, you might want to take a screenshot on your iOS device. You can take a screenshot in iOS by simultaneously pressing the Home and Lock buttons. The screenshot will then be saved to your Camera Roll or Photos collection.
    Backup Alert Message
    Explanation / Resolution
    "A Wi-Fi connection is required to download your apps and media."
    iCloud Backup requires a Wi-Fi connection to restore from an iCloud backup. In this case, the attempted restore has not completed, and the iOS device is not connected to a Wi-Fi network. Make sure your iOS device is connected to a Wi-Fi network and is able to successfully connect to the Internet over Wi-Fi.
    "Your iPhone could not be restored because you are no longer connected to the Internet"
    Your Internet connection to icloud.com became inactive while you were downloading files for a restore. You should try the restore again from a more reliable network. Make sure your iOS device is able to successfully connect to the Internet over Wi-Fi.
    "This iPhone is currently being restored and will automatically back up when it is done."
    This message is displayed to indicate that backups cannot occur while a background restore is still occurring. You should allow the restore to complete and then trying backing up later.
    "Restore Incomplete - Some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTunes."
    Some data was not restored, for instance, apps that were removed from the App Store for legal reasons. Wait a few minutes and then attempt the restore again while connected to a reliable Wi-Fi network. If the data that was not restored also exists in your iTunes library, you can sync it back to your iOS device via USB cable sync as a work around.
    "Some items could not be restored from the iCloud backup."
    Some data such as Camera Roll photos, videos, and app data was not successfully restored from the backup. Wait a few minutes and then attempt the restore again while connected to a reliable Wi-Fi network.
    "Download Remaining Purchases? Not all purchased apps and media have been downloaded. Would you like to download these purchases, or delete them along with any app data?"
    A Backup Restore appears to have been canceled by the iCloud user who initiated it. If this is not the case and you did not cancel the restore, you should restart the restore.
    "If you restore this iPhone from an iPad backup, settings and iPad-only apps will not be restored."
    This occurs when restoring an iPhone or iPad touch from an iPad backup. Only purchased apps (including their data) and books will restore.
    "If you restore this iPad from an iPhone backup, settings will not be restored."
    This occurs when restoring an iPad from an iPhone backup. Only purchased apps (including their data) and books will be restored.
    "iCloud Backup is unable to access the account '[email protected]'. Review your account information in Settings."
    iCloud is unable to authenticate the password for the iCloud account you entered in iCloud Settings ([email protected] is just used as an example here). This most commonly happens if you reset your iCloud password but have not yet done so in iCloud Settings on your iOS Device. This can also occur if authentication is not successful for other reasons, such as being unable to connect to the iCloud authentication servers.
    "Your iPhone cannot be restored because another device is backing up. Try again later."
    If you try to restore a device from the backup of another device, but the first device is currently backing up, you will see this alert. To resolve this, either wait for the first device to complete backing up, or cancel the backup on the first device and try the restore again on the second device.
    "iCloud Backup requires that you verify your password."
    t is necessary to enter your password to allow restoring of or adding to existing encrypted backups. Enter your password when prompted to resolve this issue.
    "Any data that has not been downloaded will not be restored or backed up in the future."
    This message is provided if you decide to cancel a background restore. If you proceed you will need to restore again to get all your data on your device, or redownload your music, apps, and other data some other way. The best way to avoid this is to not cancel a background restore. If you do cancel a restore, make sure you have copies of the data that was not restored.
    "No backups available."
    The account logged in to iCloud Settings has no backups online. This can occur if you have no backups, or if you have multiple accounts and you are using the wrong account in iCloud. You should verify your account in Settings > iCloud and then try again.
    "Your iPhone cannot be restored because of a server error."
    This occurs when a server issue caused the restore to not complete. This type of alert is rare and would usually occur due to a server-side time out. If you wait several minutes and try again you may be able to restore. If the issue persists,contact iCloud Support for assistance.
    "There was a problem loading your iCloud Backups. Try again, set up as a new iPhone, or restore from an iTunes backup."
    The Backup status check for your account did not complete. This could be due to a network timeout or other reasons. If you receive this alert, the easiest resolution is to simply wait a few minutes, verify you are able to connect to the Internet, and then attempt to restore again. If you continue to receive this alert, you should make sure your iOS device is able to successfully connect to the Internet over Wi-Fi.
    "Your iPhone cannot be restored because there is a problem with your backup data. Choose a different backup to restore from."
    Your Backup does not appear to be usable. If you receive this alert, wait several minutes and try again. If issues persists, contact iCloud Support for assistance.
    General troubleshooting
    If your restore completed but it seems like you are missing information:
    Make sure you have an active and reliable Wi-Fi connection during the restore.
    Verify that the data you are looking for is actually backed up to iCloud as part of the Backup feature. See this article for more information on what is backed up with iCloud Backup.
    Some additional actions may need to be taken after a restore in order to completely restore your data:
    Re-enter passwords for some apps such as iTunes Store, Game Center, and third party apps.
    Use iTunes Match (U.S. only) to download songs, albums or playlists to your device.
    If iCloud Backup is still restoring actively, it's a good idea to let it finish what it started. However, if you continually receive unresolvable alerts, you may restart the device.
    If issues persists, contact iCloud Support for additional assistance.

    Hi,
    I'm receiving the information that "No backups available.", but if i log in my icloud I find the backup.
    What can I do?

  • After getting an update from 10.6.8 many of my programs were no longer able to open. How can I undo the update or solve this problem another way?

    After getting an update from 10.6.8 many of my programs were no longer able to open. How can I undo the update or solve this problem another way?

    Do you have a bootable clone from prior to the update? If so, roll back with that.
    Are your apps that won't open PPC and do they need Rosetta? Do you need to activate Rosetta?
    Have you considered reinstalling 10.6 from your install disc and then coming forward with the 10.6.8 Combo Updater, then doing software update and not including whatever it was you installed that caused this propblem?
    By the way - what update was it that caused this problem?

  • I bought a second 4s, when i try to make new ID, there is a message comes:cannot sign in the maximum number of free accounts have been activated on this iPhone, is there any way to solve this problem?

    i bought a second 4s, when i try to make new ID, there is a message comes:cannot sign in the maximum number of free accounts have been activated on this iPhone, is there any way to solve this problem?

    Sure. You can do it on a Mac at the following website: https://appleid.apple.com/account

  • My Iphoto libary is full and will not acept new photos, what is the best way to solve this problem without losing old photos

    Hi
    My Iphoto libary is full and wil not acept new photos what is the best way to solve this problem without losing the old photos?

    Here is a relevant discussion to your situation:
    https://discussions.apple.com/thread/2640787?start=0&tstart=0

  • We live in an old Victorian House and have virtually no connectivity on the second or third floor using a  Linksys System, will the Apple Aiorport solve thge problem ? do you need sattelite stations on each floor?

    Any advice on Airport solving our second and third floor WIFI connectivity problems welcomed, do we need sattelite stations, ?? do not mind buying the system if it works?

    ......will the Apple Airport solve the problem?
    The broadcast power of all wireless routers is controlled by law, so as you might imagine, devices from varying manufactureres tend to perform about the same. It is very unlikely that an Apple AirPort router would perform significantly better...or worse...than the Linksys device that you have now.
    do we need satttelite stations?
    Yes, probably at least one per floor and possibly more, depending on the thickness of the walls in the areas where a wireless signal will be needed. Since you already have a Linksys router, and it is always best to use products from the same manufacturer on a wireless network, it would probably make sense to check with Linksys to see what they suggest as additions to your current router.
    It would be a excellent idea to have an IT professional come out and survey the house and take some measurements with test equipment to propose a system that is right for your needs. That will likely save a lot of headaches (and money) down the road.

  • I rent a movie on iTune, dowloading on my ipad2, the movie stop reading from chapter 10, and an alert inform me when i try to Start the movie that i cannot read it. What is the issue for solve this problem?

    I rent a movie on iTunes stores, downloading it to my iPad2, but during the movie, the reading stop from capter 10 to End. I try to restart it, but an alert message inform me that i cannot read the movie. What is the issue for solve this problem? The movie is still located on apps movie, but i cannot read it. Please help.

    Having the same problem. Watched 25 minutes of a rental and it stopped with the message"unable to load video"
    Using current version IPad mini.
    Ios7 is  HUGH PIECE OF CRAP!!!!

  • When i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in  fault in the computer. try reinstall the program to solve this problem.

    when i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in  fault in the computer. try reinstall the program to solve this problem.?????????????????????

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Sir, the subject is, I do not know the original owner Will helped me know that the owner or on the way to end this problem, or any way to communicate with the person in question

    Sir, the subject is, I do not know the original owner Will helped me know that the owner or on the way to end this problem, or any way to communicate with the person in question

    This is a user to user forum.  You are not addressing Apple.  It appears that you may be having issues related to Activation lock: ( http://support.apple.com/kb/PH13695).  If you cannot contact the original owner to have them remove activation lock, you should return the device for a refund.
    HTH

  • Hey Guys, I have a IMAC G5 and I just uploaded Ilife 08 to it,  the problem is, when I create a DVD it sounds good until I burn it. About 1/4 of the way through it the sound stops..  What's going on with it?   Is it the encoding proocess??  I'm stumped...

    Hey Guys, I have a IMAC G5 and I just uploaded Ilife 08 to it,  the problem is, when I create a DVD it sounds good until I burn it. About 1/4 of the way through it the sound stops..  What's going on with it?   Is it the encoding proocess??  I'm stumped... Help me out here!

    Hi
    A. iMovie'08 to 11 are not the tools of choice if one aim to do a DVD as they all discard the quality of the picture by discarding every second line in it. NO way around this due to that it happens between Event's and Project's so as soon as it is being edited - Quality is lost.
    B. I use iMovie HD6 or FinalCut
    C. if iM'08 to 11 is a must - THEN DO NOT - Share to iDVD - BUT - "Share to Media Browser" and as Large (or ev. Medium)
    THEN DO - Save as a DiskImage and see that this plays OK and ALL SOUND
    D. if added audio from iTunes - then instead in iTunes - Collect all needed Audio into a NEW PlayList then BURN this as an Audio-CD (.aiff - NOT .mp3 or other) - Then use the Files on this CD in Your Movie Project's (I do)
    E. I only use .aiff audio - 48kHz 16-bit (miniDV tape Camera) or 44.1kHz Audio CD - NEVER .mp3 or .wma or other file format - ALL is converted first into .aiff - ALWAYS ! - I have very few problem with Audio in my projects in iMovie or FinalCut !
    Yours Bengt W

  • I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

    I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

    IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.

  • After update to OS X Maverick I can not open files in Lotus Notes Smart suite. Is there any way to solve this problem?

    After I updated to OS X Maverick I can not open files in Lotus Notes Smart suite. Is there any way to solve this problem?

    Ok this worked to solve the error.
    Use cmd prompt in windows 7 or 8 and run as admin:
    sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
    sc config mrxsmb20 start= disabled
    No need for all that power shell nonsense as shown elsewhere for windows 8.
    That's it. Also force smb2 disabling on the apple side for good measure.
    With the above I was able to network mavericks and windows 8.1 pro flawlessly. He issues I had before where I could not read video, ISO and audio files (but could open documents and pictures from the windows machine connected to an apple network share folder went away.

  • Easier and better ways to solve current problems with Acrobat?

    Is there no better and easier way to solve the problems (installation, re-installing and crashing) with Acrobat? I really think that the ball is in Acrobat's corner right now, because I should not (for example) need to deactivate and re-activate my subscription in order to get AcrobatPro XI to work on my computer, let alone deinstalling an older version that (for now) does work, risking that in the end neither of them work. I need the (great) AdobeCloud applications to do my work as a freelancer, and I really cannot afford this kind of trouble with my applications, nore loose time repairing them. These are difficult times as it is.
    Regards,
    Marc

    Sorry, I can't. When I installed it there was no message that said I had to deinstall the old version first, and with other Adobe CC applications there had been no trouble at all, so I installed it with The previous version still on my computer.
    After installing, neither of them would start up properly, so I deinstalled version XI, after which the old version worked again, but my Adobe Application Manager does not let me download the XI version a second time, so I cannot try again.
    Regards,
    Marc
    Op 7 dec. 2012 om 00:41 heeft David Kastendick <[email protected]> het volgende geschreven:
    Re: Easier and better ways to solve current problems with Acrobat?
    created by David Kastendick in Acrobat Installation & Update Issues - View the full discussion
    The description of the issue you originally presented isn't something that I've seen happen to Acrobat when installed as a part of Creative Cloud.
    Could you provide a specific description of the behavior that occurs when you launch Acrobat XI now?
    Thanks,
    David
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4902597#4902597
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4902597#4902597
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4902597#4902597. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Upgraded to Lion without knowing I would no longer be able to open old Apple Works files.  Is there a way to solve this problem?

    Upgraded to Lion without Knowing I would no longer be able to open my old Apple Works files.  Is there a way to solve this problem.

    Pages will open the Word Processing ones.
    Regards
    TD

Maybe you are looking for

  • Low Broadband speed = line fault?

    Hi, We have had a very slow download speed since the high winds started last week (live in a rural area about 1 mile from exchange). I have run through the BT Broadband speed wizard & not improved the speed. ADSL Speedtest results are: Download speed

  • How do I switch from Windows to mac?

    How do I switch from Windows to mac on a macmini?

  • JasperServer Portlet on Webcenter

    Has anyone attempted embedding the JasperServer portlet into Spaces? I managed to get the portlet deployed to Weblogic and register it as a WSRP Producer but it doesn't render on Spaces. I get errors relating to Spring framework (Jasper uses the spri

  • The iPad shuts down when the cover is closed so I can't get mail message or Skype alerts?

    Didnt do it at first but now when the ipad cover is closed it wont alert me to mail or massages etc. Done everything I can think of but to no avail. Perhaps I have changed a setting without realising it... Can any one help with that one?

  • LifeDrive cannot see my network

    My network is working, I can use my laptop wirelessly.  However, I cannot see my network on my LifeDrive, as though it is not receiveing it, although I seem to be able to see other networks.  I have tried setting the router to .11b only, changed the