The WebHelp doesn't open in Chrome using Robohelp word X5
Hello All,
I am using Robohelp X5 (very old version) to generate webhelp. They seem to work fine in all the browsers except Chrome. When i click on the help the blank pop up opens.. It does not load the content. Infact i downloaded the new version of whver.js file from Peter Grainge Snippets section. I am afraid that was for Robohelp 7... However i replaced the whver.js file generated the new output and uploaded them. Even then the Webhelp in chrome is not working..
I can see only 2 blank windows which just says "about blank" on top...
Any suggestions will be appreciated...
RoboHelp does not support Chrome, even the current version. You could see if your help works with the current version by using the trial but do not load it on your production machine as you will likely encounter problems if you revert to X5. If it does not work, you're out of luck.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Similar Messages
-
How Can A Website Be Opened In Chrome Using Adobe PDF Script?
How Can A Website Be Opened In Chrome Using Adobe PDF Script?
An Internet Explorer website can be opened using: app.launchURL("Website-Name", true);Does it not just open it in the default HTTP viewer? If not, there certainly isn't a chrome-specific interface.
-
Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
When I click systems preferences, the folder doesn't open. How to I again access systems preferences?
Are you an administrative user?
Are you using any tools which impact System cache? If you are, stop. They are NOT maintenance tools despite their description. They should only be used to troubleshoot cache issues. They can create their own cache issues if you aren't careful, and I only recommend using them on systems that are already backed up. If you were using such a tool and found out how to remove it from its developer, including any supporting documents, and don't have a backup, still backup your data at least twice, as you may be able to import the data back once erase and installing the system. Let us know where you stand. If you aren't using such a tool, still backup your data at least twice, as there are other things that can corrupt or disable System Preference launching, but we can't tell safely unless your data files are backed up at least twice in two separate locations. -
File Error: The Specified file is open and in use by this or another app...
I have imported a string of pictures and dragged them into the FCP timeline. I render them and it renders a certain percentage then it stops and says "File Error: The Specified file is open and in use by this or another application."
After reading this, I quit out of FCP, restarted my computer, opened FCP, nothing other program, tried to render again and same thing happened. It renders part of it then the error message pops up, then I can render again and it will do another percent then it will pop again and so on.
Suggestions, or does anyone know why this happened? Thank you very much for your time.
Aokay - don't know where you've got your scratch disc set but hopefully it's to another drive other than your boot.
The same drive where your render files should be located, ie some drive other than your boot drive.
Can you copy the jpegs over to that drive into a folder.
Delete them from your tl, delete them from your proj. Save your project. Close fcp.
If they're on your boot drive - delete them.
Reopen fcp and Reimport them from the new location.
Sorry for all the steps - but we have no idea how you have configured fcp or your level of experience. Trying to cover all the bases ... -
FILE ERROR: The Specified file is open and in use...
FILE ERROR: The Specified file is open and in use by this or another application.
I get this error when I import a .MOV created by Live Type. All applications, except FCP, are closed. I can reboot the computer and get the same thing. It happens when I try and "render all". Thanks.It's probably either spotlight looking at the files, or some anti-virus program thinking your render is a virus.
-
I try to open the camera app, but it doesn´t work, the shutter doesn't open. I bought the ipad last week!
Can anybody help me??
Thanks!
KarenQuit the camera app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesnt help, try this. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I am on a trial version of InDesign in Creative Cloud and before I purchase need to know why and the files cannot be opened by others using CS6. Isn't Cloud compatible with CS6 design software?
Industry standard files such as JPEG are compatible with many brands/versions of programs
Proprietary files such as those created by InDesign are often not backwards compatible, due to new features in newer program versions
This is not unique to Adobe... MS Word DOCX files are not backwards compatible with earlier versions of MS Word -
I recently downloaded the latest version of Adobe Reader for my MacBook Air and now when I try to open a new pdf I get the Adobe logo and text in Japanese and nothing else. The pdf doesn't open. Any suggestions? I never had this problem until my cache was cleared and I had to re-install Adobe Reader. Any help would be appreciated.
Just to say I am having exactly the same issue on my MacBook Air. I can't remember what I did but after this happened a few times, and once I had clicked on the Japanese pop up, I managed to do something that now means I get the pop up in English, saying 'Adobe Reader blocked for this website'. When I click on it it asks me to trust the content and then I get a bar with the text in Japanese. Eventually the pdf does open. However it's very irritating that I have to trust every pdf individually which I never had to do before the latest upgrade, and I don't understand why I get messages in Japanese. I will be interested to see whatever answers other more technical people may provide!
-
My iPod camera won't work. The shutter doesn't open at all. I backed up and restored my iPod but it didn't make it work. Now I'm so mad and confused. Please help.
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
Running 10.4.11 and trying to restore OS9 as well as iLife etc. I tried to install iLifer from the original disc and the computer doesn't open the install program with the .mpkg file extension. Can you help?
Hi Barbara,
Try Pacifist...
http://www.charlessoft.com/
then extract/install what you need from your Install Disc. -
I have created an 100 page booklet in Pages, with many photographs, and much written word, can I export it to ePub, and make an electronic book, because it says that "Note: The Pages document must have been created using a word processing template"?....
Basically what I want to do is publish the document into both an eDocument, and a hard copy document. What is the best way to do this?No Peter, this statement came right off the Apple ePub statement when outlining how to use ePub. the full context is:
Creating ePub files with Pages
Summary
Learn how to create ePub files with Pages.
Products Affected
Pages '09
ePub is an open ebook standard produced by the International Digital Publishing Forum. Pages ’09 lets you export your documents in ePub format for reading with iBooks on iPhone, iPad, or iPod touch.
iBooks supports both ePub and PDF file formats, and you can export both from Pages.
When to use ePub or PDF
Use ePub when text is the most important part of your document, for example when you create a book, a report, a paper, a thesis, or classroom reading material.
More details on using ePubUse PDF when layout is the most important part of your document, for example when you create a brochure, a flyer, or a manual with multiple illustrations.
More details on using PDF
Creating an ePub Document to Read in iBooks
You can export any Pages word processing document to the ePub file format for reading in an ePub reader, such as the iBooks application on the iPad, iPhone, or iPod touch. Documents created in page layout templates can’t be exported to the ePub format.
Documents exported to ePub format will look different than their Pages counterparts. If you want to get the best document fidelity between the Pages and ePub formats, style your Pages document with paragraph styles and other formatting attributes allowed in an ePub file. A sample document is provided on the Apple Support site that features styles and guidelines to help you create a Pages document that’s optimized for export to the ePub file format, which you can use as a template or a guide. To learn more about using paragraph styles in Pages, see the topics under the heading “Working with Styles” in the Pages built-in help.
To read your ePub document in iBooks on your mobile device, you must transfer the ePub file that you create onto your device.
To use the “ePub Best Practices” sample documentTo learn more about using the ePub format and get a better feel for how a Pages document might appear as a book in iBooks, it’s a good idea to download the “ePub Best Practices” sample document. After reading the guidelines and instructions within the document, you can use it as a template to create your own document. You can also import the styles from the sample document into a new document you create.
Download the “ePub Best Practices” sample document at the following web address:
http://images.apple.com/support/pages/docs/ePub_Best_Practices_EN.zip
Do either of the following:Use the sample document as a template.Import the paragraph styles from the sample document into a new or existing Pages document.
Export the document you create to ePub format to see how it looks in iBooks.
Preparing an existing Pages document for export to ePub format
Documents exported to the ePub format automatically appear with page breaks before every chapter. A table of contents is automatically generated, which allows readers to jump quickly to any chapter title, heading, or subheading in the book. In order to create a meaningful table of contents, it’s important to apply appropriate styles within your document. The ePub reader uses the paragraph styles to determine which items should appear in the table of contents for your book.
Note: The Pages document must have been created using a word processing template. -
I just bought the new ipod and the NFL Pro 2013 application doesn't work eventhough it use to, can you help me?
See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod
iOS: How to back up your data and set up as a new device -
Itunes doesn't open after monolingual use, any further ideas?
I installed Monolanguage and now iTunes doesn's open any more.
tried everything mentioned here and in other forums.
I'm using Mac OS X 10.6.8 on a MacBook Pro.
I uninstalled Monolanguage
I uninstalled and reinstalled Flip4Mac
I deleted te TLSC file
I repaired the rights of access
I rmoved Flip4Mac and Quicktimeplayer
I restarted the system serveral times
Nothing helps.
Any more ideas?
How can I delete and reinstall iTunes without loosing all my data and backups etc.?"Monolanguage" as you say several times, or "Monolingual" as in your topic?
Flip4Mac has nothing to do with iTunes.
You have to be careful using Monolingual It can remove components other applications expect to be there. I don't know how it affects iTunes, though it could conceivably be looking for language support you no longer have.
If you're getting so desperate for hard drive space that you're using Monolingual then you may want to think about moving other files off, or buying a bigger hard drive.
You may want to consider re-installing your operating system or restoring your computer from backup if you really think this was caused by using Monolingual.
Kurt Lang's web page on Using Monolingual in Mac OS X - http://www.jklstudios.com/misc/monolingual.html - read first for important information -
Read Mail button on the toolbar doesn't open my default mail program
I've just reinstalled Firefox 17.0.1 (and everything else) following a crash. I'm running Windows 7 Home Premium, with Windows Mail (not Live Mail) set as the default email program and I've added a Read Mail button to the Firefox toolbar: all this is exactly as it was before the crash. Windows Mail is selected in Tools/Options/Applications/mailto, and also runs perfectly from its desktop icon.
However, clicking on Read Mail doesn't open Windows Mail as it used to.
I get the message "The application could not be found, please use Toolbar Buttons's options window to correct this". I'm not clear on what it is I'm being directed to do. What and where is the "Toolbar Buttons's options window"?
Many thanks.That did it. Thanks very much indeed.
Maybe you are looking for
-
How can I deal with error 200621 and 200279?
Hi, I am new to Labview. I was asked to use Labview to do some basic frequency-domain analysis for my homework. The hardware I use is myDAQ student instrumentation device. Basically, I am asked to transfer audio signal from MP3 to Labview by using th
-
Password error at laptop startup windows 8.1
Firstly, I cannot understand why MS is so intrusive and over the top in password control at startup. My machine, and software and I paid for it, therefore I own it together with the right to use it and all its software without interference from some
-
Changing input without creative
I want to change e.g. from Line-In to Auxiliary. Is it possible to do this via batch or VB or w/e, just outside of the creative program so I can do it with one click?
-
Debliery Units : VENDOR IS NOT DEFINED FOR THIS SYSTEM
Dear Experts, In prespective modeler , tried creating 'DELIVERY UNITS'. However get error message "CANNOT CREATE DELIVERY UNIT AS CONTENT VENDOR IS NOT DEFINED FOR THIS SYSTEM" ? How can we maintain CONTENT VENDOR ? we are using in-house HANA install
-
Passive checkbox in a dynamic stamp
Hello, Me and my coworker are trying to make a passive (no action triggered) checkbox on a custom dynamic stamp. I was told that I needed to put a script on a checkbox so the checkbox will be clickable after applying that stamp. How do I do that?