The welcome screen keeps making me take the tour each time I open

I just downloaded PSE 8 three times now (it kept hanging crashing). Turne
d off auto analyzer and that seemed to work. Now everytime i open PSE, i am forced to take the tour on the welcome screen. VERY annoying. Any help??

Bob - once i got past the welcome screen everything would work for about 2 minutes and then it would freeze (very disappointing). I read that the auto-analyzer would cause this so i turned it off, and everthing seems fine now.
I also read that there is a workaround the welcome screen (which is a terrible concept). So i created a short-cut to the organizer, and then start Priemer or PS from Organizer. Works great this way, and actually makes more sense to do it this way.
Please let me know when they fix the issue with auto-analyzer.
Thanks.

Similar Messages

When I pressed the power button it hangs on the welcome screen and what wrong with the system

When power on the MacPro it hangs on the welcome screen. What should I do to overcome this issue

I would recomend reseting the PRAM. A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings. Hope this helps!

How do I set the screen zoom, so that it doesnt change each time I open Firefox. Because I see the webpages in smaller print, and I want them larger , without having to re zoom each time I open Firefox.

I need to know how to set the zoom option under "View" Tab, shere I dont have to re zoom each time I open Firefox. I have a wide screen monitor and generally, when viewing webpages, the web content on any page is confined to center of the page, and I was wondering if there was anyway to permanently set the zoom preferences without having to change them each time i open a webpage.
IE 8 and 9 has a feature to set the magnification and i set mine to 150% which works perfectly for me. I wonder if Firefox has a similar feature.

TonyE
Thanks a lot. I downloaded the Default FullZoom Level add-on. My problem is now a history. thanks a million

Since the last update (version 12), Firefox takes a lot of time to open new tabs, usually it open them, but i can't see the tabs and browse through them

it also ignore my mouse clicks on tabs.
i can browse them only by ctrl+Tab (but i see only the first tab on the tab bar...)

hello, in order to further diagnose the issue please [[Troubleshoot Firefox issues using Safe Mode|run firefox in safemode once]] & see if the problem is occuring there too. if not it may be related to one of your addons or hardware acceleration. in this case try disabling all extensions in tools > addons > extension, restart firefox and reenable the extensions one-by-one (restarts of the browser might be necessary after each time) until you find the one that's causing it. you can disable hardware acceleration in tools > options > advanced > general.
if the two suggestions from above don't help, please also have a look at your security-software & make sure it's not blocking/sandboxing the updated version of firefox or the plugin-container...

Why does aperture keep asking for my activation key each time I open the programme?

I have aperture on iMac and macbook air - everytime I open aperture on air, it asks my name and key number. how do I get it to remember this? why does it do it?
Help please - I am tired of it.

Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise the serial number cannot be stored.
Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library, and this requires read/write access for administrators. Do you enter your serial number using an administrator account?
When did this start? Have you migrated your system from another mac? Then you still may have an older ProAppSystemID file or Aperture cannot write to the System Library.
To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
Quit Aperture.
Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see the file there, move it to its proper location.
Aperture must be running, and you will have to wait a few minutes to be seeing the file appearin the /tmp directory.
In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
Regards
Léonie

Windows 7 won't load past the welcome screen

I'm trying to boot up my laptop but it keeps hanging on the welcome screen. I go through the password page and then it just sticks on the welcome screen with the little spinning circle. It does the same in safe mode but the circle is completely frozen
on the welcome screen and then it gets no further. I don't have a windows recovery CD. Any suggestions?

Hi,
I suggest boot into Recovery Console to perform System Restore to test the issue.
1. Remove all floppy disks, CDs, and DVDs from your computer, and then restart your computer using the computer's power button.
2. Do one of the following:
If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windowslogo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon
prompt appears, and then shutting down and restarting your computer.
If your computer has more than one operating system, use the arrow keys to highlight the operating system you want to repair, and then press and hold F8.
3. On the Advanced Boot Options screen, use the arrow keys to highlight Repair your computer, and then press Enter. (If Repair your computer isn't listed as an option, then your computer
doesn't include preinstalled recovery options, or your network administrator has turned them off.)
4. Select a keyboard layout, and then click Next.
5. On the System Recovery Options menu, click
System Restore.
Kim Zhou
TechNet Community Support

If after reinstalling my osx, I'm back at the welcome screen is my mac clean now?

I'm reselling my macbook pro.
And I erased it from command r during reset, then reinstalled osx.. I'm back at the welcome screen to register and setup the mac.
Is it all cleaned of my data and ready to be sold?
I don't want to set it up with my information.
Thanks

Yes, just quit the set up and shut down the Mac.

I just installed PE13, I still have PE 11 on my system. On the welcome screen the Organizer Icon is black (not Red) while the PE icon is Red, any idea whats going on?

Should both the organizer icon and the PE icon both be Red if things are running well? Here is what it looks like, I transferred my PE 11 organizer over to 13 organizer, I would expect them to be the same color, did I do something wrong?

moonpie001
On what computer operating system is your Premiere Elements 13 running?
On my Windows 7 and 8.1 64 bit, the Welcome Screen presents as shown in the following screenshot from the program on Window 7 64 bit.
Let us explore
I transferred my PE 11 organizer over to 13 organizer,
Do you mean by that you converted the Elements Organizer 11 catalog in Elements Organizer 13, using Elements Organizer 13's File Menu/Manage Catalogs/Catalog Manager and the Convert option there?
I converted my Elements Organizer 11 catalog in Elements Organizer 13, and saw no changes in the Premiere Elements 13 Welcome Screen.
All is as is.
As a point of reference, in Premiere Elements 11 Welcome Screen, the Organizer icon is turquoise and the Video icon is purple.
All normal.
Remember, you are not really transferring Elements Organizers 11 to 13, you are converting the Elements Organizer 11 catalog in Elements Organizer 13. The original Elements Organizer 11 is not changed in 11 but is not updated when you make changes in the converted catalog in Elements Organizer 13.
Bottom Line: Everything sounds normal so far for your Welcome Screen in 13.
Please review and consider. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

TS3694 I was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is

was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is useful

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

Satellite L500 will not load past the 'welcome' screen

Hi,
My Toshiba Satellite L500 laptop will not load past the 'welcome' screen. The cursor thing just keeps going around and around but won't go to my desktop.
Last night it went into some temporary profile and it had a message saying 'your other profile cannot load at this time please try again later'
Any help would be greatly appreciated.
Thanks,
Kara

The error message is not known to me and also searching in google didnt get any hints.
Possibly your Windows OS is muddled up.
Did you try to boot Win 7 in safe mode?
Try this. Restart your notebook, tap the F8 key.
In advanced boot options choose the option called Safe Mode.
If the notebook does not allow booting in Safe Mode, try the option Last Good Known Configuration.
If this didnt help, try Repair my Computer. Here you can choose between different settings.
The one which could solve this is HDD recovery which helps you to set the notebook to factory settings. But this means also that your HDD would be formatted!
So be aware of this!

Energy Management software keeps making shortcuts in the Start Menu

I just recently reformatted my laptop and installed Windows 7 Ultimate. I got the drivers from my laptop model's download page in the Lenovo support website, and everything was working fine - except for when the Lenovo Energy Management software would keep making shortcuts in the Start Menu every time I reboot the system.
I had my Start Menu organized, created folders to categorize my apps, so it's really annoying when a folder I already deleted pops up every time I start my laptop. Why does it happen? Is there a fix for it?

Hi Pommy,
Welcome to Lenovo Community!
I’m sorry to hear that a shortcut is automatically getting created, I would suggest you to re-install the LEM (Lenovo Energy Management) in the computer and while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
Do post us back if the issue persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Display the Welcome screen when Photoshop CC starts up?

I have researched and found lots of incidences where people want to keep the Welcome screen from displaying but I am want it to display and it will not.
The checkbox under Edit>Preferences>General that says "Do Not Show Welcome Screen on Launch" is unchecked. I have tried checking that box saving, then unchecking saving again and restarting Photoshop. I have tried uninstalling Photoshop twice, once saving my preferences, the second time discarding my preferences and re-installing. Still no Welcome screen at launch. I have read that there is an option under Help>Welcome... to reopen the Welcome screen. I do not see that option and believe that is on the Mac only.
By the way the Welcome screen opens/works perfectly in Illustrator CC 2014.
I am running a Windows 7 PC with the latest version of Photoshop CC 2014.
Anyone have any ideas?
Thanks!

I believe you have an installation problem. Others have had problems with the Welcome Screen and I had a problem after the 15.2.2 update. Others were not able to Play the video tutorials from the welcome window. Photoshop seems to use CEPHtmlEngine.exe to display the Welcome screen. The CC 2014.2.2 update installed on my machine without a problem. CC 2014 worked and I had turned off the welcome screen. However I did not have the new Photoshop CC 2014 preference Do not show Welcome Screen on launch and when I tried to use menu Help>Welcome I received a popup error stating Photoshop could not start the plug-in because it was not signed. The way I was able to fix this problem was to download the direct CC 2014 installer and install CC 2014 on top of the CC 2014 currently insall. CC 2014 installed and was installed activated and after I used menu Help>Update to get CC 2014 up to CC 2014.2.2 all worked my Add-ons and preferences were still there. However if I start CC 2014 and immediately try to open the Welcome screen I will get the pop-up your getting Welcome Dialog not installed. But when I click OK and try menu Help>Welcome a second time it works. The new Preference Do not show Welcome Scree on launch is there and I can set it there or from the welcome screen option.

How can I speed up the Welcome Screen on Illustrator CC 2014?

I have updated to Illustrator CC 2014.
I find that the welcome screen takes a long time to load. It is far from convenient.
Is there anything I can do to speed up the welcome screen?
Any help will be appreciated.
System info:
OS: Windows 7
CPU: Xeon 3.2GHZ
RAM:16GB
System : 64bit

Hi ImmerTech,
You can disable the welcome screen permanently by following below steps if you are on mac machine other wise scroll down to bottom
and check the option "Don't Show Welcome Screen Again".
Go to Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app
When you get to "Adobe Illustrator.app" you have to hold down the Control key
The Control key reveals, among other options, "Show Package Contents" Select that, and then the "Contents>MacOS>CEP>extensions" folder and removed "com.illustrator..welcome" folder.
Hope this helps.
Regards,
Sumit Singh

HT1529 my screen keeps jumping up to the top when on web sites

my screen keeps jumping back to the top of pages when i am on the web.

Hey Wooskie,
Welcome to the BlackBerry® Support Community Forums.
To better assist you I have a couple questions, is this happening with all conversations? Have you reinserted the battery?
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I updated to io7 and the photos from the welcome screen and the wallpaper are like too much zoomed thank you

I updated to io7 and the photos from the welcome screen and the wallpaper are like too much zoomed thank you

View your landscape photo with your phone in the upright position.
Tap on the photo once so the background goes black
Take a screenshot now by pressing the round button and the top button together.
Go back into your photos and find this new screenshot - then apply this as your wallpaper. You should be able to resize it :)

The welcome screen keeps making me take the tour each time I open

Similar Messages

Maybe you are looking for