The WF doesn't start from FV50

Hi all,
I need to link a custom WF to FV50 tx when a G/L document (type Cost Adjustment) is saved as completed and I was sure the right B.O. was FIPP, but this WF doesn't start even if the start event is FIPP.completed (active) and there's a start condition in SWB_COND tx about document type = CA.
Do you know there's another B.O. to use?
Thanks.
Angelo

Thanks Ute,
in fact the BO is right and the workflow now starts, but there's a problem about the start event: if I create a new document via FV50 and I save as completed directly the triggered event is FIPP.created (I expected "completed") while if I park it before and then I save as completed I obtain the 2 events FIPP.created and completed. That's why my WF didn't start.
I'm using R3 4.7ext2 and I didn't find an OSS note about this issue.
Any idea?
Thanks.
Kind regards.
Angelo

Similar Messages

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?
Also, can I use music as backround to some of the slides, not to all of them as I'd like to play videos on the others?

I have reinstalled the drivers. I watched it install the realtec and cirrus drivers. Hovering the mouse over the speaker icon says 'speakers: HP'. They are actually 'Creative'. 'Properties' indicates 'IDT High Definition CODEC' and 'This device is working correctly'.
Driver details gives 'c:\Windows\system32\drivers\dmk.sys'.
There is still no sound, although the little level meter on the control shows a green bar rising and falling.
Obviously, it thinks it's working, but there's no connection to the speakers. They're not muted, either. I checked that too.
Any other ideas?
Thanks.

Config Tool doesn't start from the application list

Hi all,
I have installed Planning, EAS, and Workforce on a server but when I go to configure the tools, the config tool doesn't start from the page where you select the applications to configure. Instead, it starts with all the apps listed with the message: "You have selected the above apps to configure" and it has a Back button but it doesn't work, and it has a Next button and when I press it, it says Done.
I need to configure the database and deploy to the application server.
The Shared services is on a different server and is up and running. Essbase is on a separate server and that's up and running.
I am working with 11.1.1.3 32 bit applications on a 64 bit Windows OS.
If you have run into this, please let me know what am I missing?
Thanks

Hi
First of all I couldnt get your problem as in your query description you have written "sometimes the video doesn't skips a couple of seconds from the beginning even though the value of NetStream.time property is 0" which is contradictory with the query title "Video doesn't start from the beginning".
But anyways I think you should check ns.time in Play.Start there you should get always 0 but in Buffer.Full there may be the case that ns.time is not 0 but has some value but that value is very small less than 1.
If still you have issue please clarify your problem then probably I will be able to answer your query.
Regards,
Amit

My MacBook Pro doesn't start; in safe mode shift CMD V the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this?

My MacBook Pro doesn't start; in safe mode <shift CMD V> the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this? Thanks Eamonn

Thanks for these suggestions: I have tried safe mode re-starts (both "verbose" and simple "shift" + power) to no avail. I get the error message "disk0s2: media is not present". Following this I inserted the installation disc and from there ran disc utility. The "Verify Disk" indicated an error " invalid sibling link" which it could not repair.
I also tried to completely re-format/erase the disk, but again got an error message "disk object invalid or unable to serialize".
Any ideas of what could be causing this or the best solution? I fear I am fast running out of options.

The browser doesn't start after turning off and turning on the computer

The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!

Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
* check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
thank you

Why do my creative cloud app don't start? I can't uppdate my apps, haven't been able for weeks. I have a fast internet, but the app doesn't start. It sucks!

I can't uppdate my apps, haven't been able for weeks. I have a fast internet, but the app doesn't start. It sucks!

Can you give us more to go on. Your OS? Which Creative Cloud app? Any error messages. You can download the Creative Cloud Cleaner tool and restart from scratch if you like.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Weird noise and the MacBook doesn't start

Heyya guys!
A friend of mine has this MacBook white and for some reason the computer doesn't start... i don't even get the Apple logo and there is something strange on the combo drive... It sounds like it's trying to eject something or read something but there's nothing inside....
Any suggestions?
Thanks!

Does your friend have the original install discs for the computer?
If so, have your friend insert Install Disc 1 and boot the computer with the C key held down. Once the Installer loads, choose a language, then from the Utilities menu, choose *Disk Utility*. If your friend is using Boot Camp to run Windows, have him/her click on *Macintosh HD* in the left-hand column. If Windows is not being run, have him/her click on the top-most hard drive icon, which will have the capacity of the drive listed.
Once a drive is selected, click the *Repair Disk* button. Record any errors that can't be repaired, if any.
If the install DVDs aren't available, have your friend try booting in Safe Mode by holding the Shift key while booting.
~Lyssa

UWL: The request cannot be started from the Business Workplace?

Hi All
Please assist I am currently trying to execute the standard leave request approval within the UWL.
This is the standard leave approval screen for workflow template WS12300111.
I get the below error in a SAP ECC easy web screen.
The request cannot be started from the Business Workplace
Message no. HRTIM_ABS_REQ066
Can anyone give me any insight to this as I have made multiple changes tothe UWL config.
Regards
Maahir

BY seeing the error message I think you might have not registered the task in the Portal, as you are have mentioned easy web screen
1. When ever you are trying to execute the workitem from the UWL and you are able to See the SBWP SAP inbox in the browser then it means that the task of the workflow is not registered in the portal.
2. Please ask your portal team to register the task in UWL with corresponding visualization parameters.
[check for the parameters that are to be configured|http://help.sap.com/saphelp_nw04/helpdata/en/20/f0c82c9f6748c58d9ea14b3bbed93a/frameset.htm]
You cannot execute a leave workitem from the Inbox. if you try to execute then it prompts the error message that you have mentioned.
Try to do check all the below points.
1. Check whether the task TS12300097 is registered in the SWFVISU txn it should be using a Java Application. with the parameters
APPLICATION     LeaveRequestApprover
DYNPARAM     wi_id=${item.externalId}
PACKAGE     sap.com/ess~lea
2. Second thing is make the task as General Task from the PFTC txn. so that the agent can approve
3. Ask the portal guys to register this task in the XML file where all the application specific task's are registred. and then try to execute the workitem, this time it will show you the leave request application.

HT1349 hi ,i just got a Parallels desktop 7 and i try to install it but the cd doesn't start when its inserted.how can i solve this? the macbook pro i just got it few days back so its the last version..thx

hi ,i just got a Parallels desktop 7 and i try to install it but the cd doesn't start when its inserted.how can i solve this? the macbook pro i just got it few days back so its the last version..thx

Hi,just now i open it with finder and it started downloading!!!
Thank you,very new to mac:)

I listen to a lot of live performances (house sets that are from 1 hour to 3 hours long) when I start to listen to a set and then stop to do something else on the iPhone when I go back to start to listen to the track it has started from the beginning.

I listen to a lot of live performances (house sets that are from 1 hour to 3 hours long) when I start to listen to a set and then stop to do something else on the iPhone when I go back to start to listen to the track it has started from the beginning.

It sounds like either your hard drive or the SATA cable that connects it to the motherboard are failing. This could be heat related in your case, which is why you see it after it runs awhile. You can take it to the Genius Bar for a free evaluation. If you decide to test it yourself, I usually suggest moving the hard drive to an external enclosure. If it works there for awhile, the cable is probably the issue.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1397647657&sr=8-3&keywords=2.5+enclosure
http://www.ifixit.com/Device/MacBook_Pro_13%22_Unibody_Mid_2009

I cannot get the photoshop download to start from the order page - any ideas?

i cannot get the photoshop download to start from the order page - any ideas?

Brookie_g75093 I would recommend trying the steps listed in I can't download a purchased product from the Adobe.com Store.

Local OC4J instance doesn't start from oracle developer suite 10gR2

Local OC4J instance doesn't start from oracle developer suite 10gR2

You might also wish to consider posting your question here:
 
Forms
 
OC4J (maybe)

Problem E60 - Update - The phone doesn´t start

Hi,
can please somebody help?? I have updated my Nokia E60 (Firmware 3.0633.09.04), but the phone doesn´t start now!
How can I reinstall operation system of this phone%
Please help.
Thx.

Try this
connect the phone to a wall charger > press and hold power & volume up > let it charge for 30min or so then repeat the update process or use SUS
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
Don't forget to give Kudos (Click on the half star + )
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

In itunes on iphone when I press play the song doesn't start

I just replaced my iphone and the new phone is giving me trouble. First, the headphones wouldn't work. Now in itunes when I press play on a song nothing happens.....the song doesn't start. Pandora is working.....this is just an Itunes issue apparently.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

When I click on Firefox shortcut icon to start the Firefox browser, the browser doesn't start-up (i.e., like Internet Explorer starts-up when I click on the Internet Explorer Icon)

When I click on Firefox shortcut icon to start the Firefox browser, the browser doesn't start-up (i.e., like Internet Explorer starts-up when I click on the Internet Explorer Icon).
Thanks,
Carl Togni

Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

The WF doesn't start from FV50

Similar Messages

Maybe you are looking for