The white color become blue in Bridge CS5

the same photo I open in Photoshop and Bridge
but inside Bridge it become so blue tone~!
is it the ICC profile or any color preview setting not correct?
Pls. advice., where the manual set up??
thx

It's jpg file,
I check in my colleague computer, seem haven't happen in her .
just my computer. not sure am I set up something by mistake

Similar Messages

The what color become blue in Bridge CS5

the same photo I open in Photoshop and Bridge
but inside Bridge it become so blue tone~!
is it the ICC profile or any color preview setting not correct?
Pls. advice., where the manual set up??
thx

It's jpg file,
I check in my colleague computer, seem haven't happen in her .
just my computer. not sure am I set up something by mistake

SE78: loaded an image, the white color become grey

Hi All,
I've loaded an image.bmp by t.code SE78
Then I've emploied it in a sapscript.
Launched the print, the withe of the image has become grey
Why did it happen?
Thanks

Hello,
From the True Color graphics only 24 bit True Colors graphics are
supported by SAP.
So check if your image is a true color bitmap with 16,7 millions (24
BitsPerPixel) colors. The SAP has to convert it to a bitmap with 256
colors during the upload. Here the colors can slightly change.
Please decrease the color depth of the image and upload in your system
again.
Maybe the result will be much better after this.
Regards,
David

How can I see the previews of my D610 in bridge cs5 and how can I open them in my CC photoshop?

How can I see the previews of my D610 in bridge cs5 and how can I open them in my CC photoshop?

Nah. Raw support is version specific and that extends to Bridge as well. Older versions simply won't handle new cameras. If this is important to you, you will have to use Bridge CC.
Mylenium

Can i make the setting and keyboard background black ? , because i have vision problem and the white color is too bright and cause pain and headache for me . thanks

can i make the setting and keyboard background black ? , because i have vision problem and the white color is too bright and cause pain and headache for me . thanks

Drmikekuna wrote:
... Sony AVCHD .. Canon SD ... Logitech .. Flip Mino HD. ..
.. Certainly not the best idea for a professional but just fine for a guy who likes to edit for fun.
that's were the fun stops on a MacOs-based system ..
FC/e supports only a few 'standards': DV (as from miniDV cams), HDV (from miniDV devices), AVCHD (from most devices) and with a little trick, described on my website AVCHD-light (720p, as from many compact-stills) ..
done.
some Flips are supported by iMovie, which you can abuse as a converter tool.
but 'non video standard' (=read 'video' as 'in TV') formats, resolutions and codecs ...
a) manual conversion = less convenient
b) loss of 'quality', e.g. when you blow-up tiny 480x320/15fps into video..
FC/e is FC/pros lil' brother.. meant for a more.. adult workflow..
if you like to wrestle with multi-formats, stay with Windows/Magix/..
Windows=options, with a chance of getting lost
MacOs=convenience, with a chance of getting restricted

The white colors in my screen are to bright. Help

The white colors in my screen are to bright. There is no difference between different colors of white so I lose a lot of detail in images. What can I do. When I put my mac to sleep it was ok for a while but when I restarted my computer I lost it again.

Brightness adjusts the blacks, contrast adjusts the whites.
for a quick adjustment look at this 26 step chart
A should be 255
Z should be 0

How come the white color ipad's body is in silver color?

I just got my ipad 2 today.. I really disapppointed when i see some diffrent.. How come the white color ipad's body is in silver color? But yr webpage show the body is white?

Um.....you're not writing Apple here. This is a user to user forum. But, perhaps you should have looked at some more pictures of iPads prior to ordering one. All iPads (Black face or White face) have silver metal bodies, that wrap up the side to the glass front.

White Balance NOT Synchronizing in Bridge CS5

Instead of LR3 I use Bridge CS5 and the camera raw tool for my edits (it's all the same tools and runs faster.) ANyways, a strange problem i noticed recently after SEVERAL job edits.. I noticed the white balance was not the same on all my files. THIS IS A HUGE *** PROBLEM FOR ME! I tried everything but for some reason Bridge is not synchronizing the white balance, even if I just have white balance selected.. I need to have all my files the same.. I doesn NOT work in the camera raw module and it does NOT work when you right click, go to settings, copy settings and then paste settings..
Any one else experienced this?
I have ACR 6.1 installed

Is the WB As Shot, perhaps? Synchronizing As Shot as your WB does exactly that, sets the WB to whatever the camera was set to, which if it is Auto WB in the camera, then the Temp/Tint values will be different for each photo. If you want all the WB settings to be the same Temp/Tint values you must change the WB to Custom or use one of the built-in WB selections that has a constant set of Temp/Tint numbers.
What I usually do is modify the As Shot WB to something slightly different by changing the Tint value and then set the Tint value back to what it was if necessary, which will make it say Custom instead of As Shot, and then synchronize with this Custom value.

Preview panel loses Color Management after Minimize Bridge CS5

Whenever I minimize the Bridge CS5 application window to the Windows taskbar, upon restoring or maximizing the Bridge application window the image(s) currently showing in the Preview panel no longer appear color managed (they look exactly as they would appear from a non-color-managed app.) In order to see them as color managed again, I have to either de/re-select their thumbnails or double click the Preview panel twice (once to minimize it, and once again to restore it.) Otherwise resizing the Preview panel has no impact on the color. The thumbnails in the Content panel are fine. This did NOT occur in CS4 or earlier versions of Bridge - otherwise the same environment.
I have a wide-gamut monitor, which causes many non-color-managed images to look super saturated, especially reds & greens, so it is probably much easier to notice this behavior in this environment than from a typical-gamut monitor.
Windows 7, x64, ATI Radeon HD 4850 graphics card, Bridge v4.0.3.9
Anyone else notice this annoyance?

Thanks Curt,
I doubt this is a video issue as no other versions of Bridge behave this way on this system. I have the same preference settings in Bridge CS5 as for Bridge CS4 - which works fine. Nor does Photoshop exhibit this behavior post-minimizing, & Photoshop behaves perfectly for all the OpenGL Drawing settings (which I have set to Advanced in PS.) Bridge just seems to poorly manage the Preview panel color post-minimizing the application window, but otherwise everything displays fine during operation. I'd be surprised if it was just me but if it is, it's an easy enough annoyance to work around. I'd imagine that this isn't too observable on a normal-gamut monitor.
I tried your suggestion of "use software rendering", just in case, but it made no difference. Appreciate the idea though...
One more observation:
While thumbnails are being generated for the first time on large images, they also have the non-color-managed appearance until they complete their generating, at which time they take the managed appearance - but I just consider that a processing-timing final step & it hasn't changed behavior from previous versions of Bridge.

How do I change the text color from blue in Safari on Macbook Pro?

I have trouble seeing the light blue text color -- many article use this. How can I change the text color?

Is this a particular website where you see the light blue color?
If so, please post a link to that site in your Reply.
Exactly which light blue color are you referrting to ??

How can i get the same colors in PS and Bridge

My pictures is shown with stronger contrast and saturation in bridge than the original PS file in PS.
Im trying to open the Suite Color Management in Bridge but it says that "Suite Color Management requires that a qualifying product has been launched at least onc to enable this feature". What shoud I do?

Remember that Photoshop is showing you a rendering of the original file, while Bridge is showing you a rendering of the sRGB preview Bridge itself generates. Color management plays a huge role in that depending on whether the file is tagged (has an embedded profile) or not.
As for the illusory "Suite Color Management", Trevor is right in pointing out that it is utterly irrelevant if you only have Photoshop and Bridge but none of the other applications in a suite. Besides…
…Inconsistency between or among applications in the artificial "suites" should come as no surprise.
The "suite" concept is a fabrication of Adobe marketing and bean-counting types. The engineering teams are totally independent of each other, they are not only in different buildings but in different cities and states of the American Union, even in different countries.
The fact that they have little if any communication among them is highlighted by requests occasionally made in these forums by top Adobe engineers to let the other teams know when there are problems in one application that impact our workflow in another one.

How can I use the presets which were generated in Bridge (CS5) so I can use them in Lightroom 4

I currently have 30 + presets which I have generated in Bridge and when I open the same photograph in Lightroom 4 it appears that the inform from the preset has not come across bridge to appear in lightroom. What have I done wrong or missed?
Thanks for your assistance
Peter

If you read the metadata from the file into Lightroom you can then use that file's metadata to create a Lightroom Metadata preset.
You'll have to do it uniquely for each of your 30 presets but presumably still quicker than creating LR presets from scratch.
And probably best to do it on dummy files and check you've only got the metadata you want before saving it as a new preset..(or at least before applying the newly created preset.to many, many files!)

Please Close The Fallowing Applications To Continue: Adobe Bridge CS5

GAHH!
Adobe Premiere Won't Download, because it thinks that "Bridge" Is open!!!!!! I EVEN CHECKED TASK! ITS NOT!!!! this happens every time....but somehow I seemed to have solved it...twice...
HOW DO I FIX THIS PROBLEM
I Get To The Second To Last part- "Installation" AND IT WONT DOWNLOAD (Trail Version) WHAT. DO. I. DO?!
ITS DRIVING ME CRAAAAAAAAAAAAAZZZZZZZZZZZZZZZYYYYYYYYYYYYY C-R-A-Z-Y!!!!

THANK YOU HUNT, I REALIZED U MENTIONED THAT BEFORE! NOW! AFTER 3 DAYS! I CAN CONTINUE MY STOP MOTION FILM! THERE WAS A SECRET BRIDGE THING RUNNING! THANK YOU! :DDDDDDDDDDDDDDDDD

Photo become Blue tone inside Lightroom 2.7

The white color become blue in Lightroom 2.7
the JPG same photo I open in Photoshop and Lightroom
but inside Lightroom it become so blue tone~!
is it some wrong setting when import?
I can c the photo change fm the correct color to that blue tone

ruby_lg wrote:
but it happen in my Pac Pro, OS10.6.4
So trash THAT profile on the Mac Pro and try again...it's the profile bud...really!

White color is overlighted

Hi!!!
Need help please!!!!!!!!!!!!!!
When I use white title, then in Final Cut its show me that they are overlighted. But, when I use the color correction, the white color become bit gray. Is it fine like this? Because if I don't make that, then when I see the titles in TV they bit shake. I mean I know why, because they are overlighted!
So, my question is: How do you make correct white titles.
Thank you very, very much for help!!!
Otto

If you use the "broadcast safe" filter [effects>video filters>color correction>broadcast safe] it will bring your white levels down to 90% which should eliviate your problem.

The white color become blue in Bridge CS5

Similar Messages

Maybe you are looking for