The wifi does not work after update 5.1.1

After I upgraded my Iphone 4 to IOS 5.1, the problem had wifi to connect to the wifi network is always seeking and never shows any network, my husband and I can connect does not mean it's my phone, he has not done the update.

Thank you very much!! There are solutions for complex problems in this world because of persons like you!!

Similar Messages

  • Playbook WiFi does not work after update

    Hi, my name is George and I am from Greece. I purchased recently a second hand Blackberry Playbook and the first thing I did was a software update. After the update the device booted normally but it couldn't detect any of WiFi (802.11b/g) access points that I have home and in my work (3 different hotspots in total). I searched on the support site for the problem and I saw that some others have faced the same issue and they fix it by doing a full wipe out (factory reset). So I tried the same with no success, now my device boots and I am unable to complete the first registration that can only be done via WiFi. I also tried to re-update the device several times using the latest Desktop Software, but the result is always the same no Wifi detected.
    I contacted the Greek subsidiary of the store that the device purchased and they told me that I must contact with RIM central branch because the RIM support policy about this product (Playbook) is that customer gets support directly from them. The store that the Playbook originally purchased is Expansys France and I have scanned the invoice as evidence of legal purchase and valid warranty.
    Please advice me how can I get support for the product because I sent an email and the reply tells me that I need to submit BlackBerry inquiry via approved channel Blackberry Playbook wifi problem. I don't know how to do this so if anyone can provide me with a link I will be grateful.
    Thank you very much.

    You can find the Playbook support numbers here.
    www.blackberry.com/playbook   click on support
    Finally, at the state you are now, find an open free hotspot (no password required, such as a Starbucks or McDonalds) to do this initial setup stage.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    Hello there, TempestBelcher.
    It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
    Apple - Support - iPhone - Calls Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/calls/#section_0
    If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Continuous with the problem, the headphone does not work after having my iphone ios 8.0.2 updated

    the headset does not work after having my iphone ios 8.0.2 updated to me is very annoying to have to be answering speakerphone is not private and can not go with the hands-free all the time

    I had the same issue until I updated my apps through iTunes. I had over 100 updates, but none of them showed on my iPod. After they updated everything started syncing like it is supposed. Go to the apps library and check for updates. After everything syncs leave your iPhone/ipod/ipad connected if the spinning arrows at the top is still spinning. It means that things are still being added. If you go to settings > general > about, you will see it loading songs, videos, photos, etc. If you back out of "about" and then go back to it you will see the numbers for each one change.

  • HT1688 My Hot Spot does not work after update to 6.0.1.  Service is with ATT.  Apple says problem is with ATT, ATT says problem is with Apple.  Anyone else having this problem?

    My Hot Spot does not work after update to 6.0.1.  Any suggestions?

    Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
    so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
    so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

  • Click to activate does not work after update

    Click to activate plugin does not work after updating to version 23.0.1

    hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

  • Print size in Photoshop CC does not work after updating

    Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
    I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
    Can anyone help please?
    thanks
    Fujibill

    Check the Image>Image Size and see what the print size is supposed to to be for the open document.
    Also, resetting the photoshop cc preferences might fix it.
    http://forums.adobe.com/thread/375776?tstart=0

  • HT4628 The Wifi does not work when Macbook Air is started by Win8. How to let the Wifi work in Win8 ?

    Hi all,
    WIFI of Macbook Air works when the notebook started with OS X.
    But when I restart the Macbook Air with Win8, the Wifi does not work.
    The Macbook Air was bought last month. It is new model. The wifi may be a/c.
    Thanks,

    hey zyzzyxx, you're not the only one with this issue. it happens to me too. as soon as i unplug my cintiq via thunderbolt display my connection shoots straight back to having 20mbps down. i checked it using a speedtest.
    ever find a fix for it?

  • Card slot does not work after update (14/10/2011)

    Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
    MacBook Pro 13 OS ver. 10.6.8

    Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

  • Apple av adapter does not work after updating ios 5,01

    apple av adapter does not work after ios 5,01. no video on vga monitor. sound goes out on iphone 4 also.

    Thank you for your interest. Last night i tried again. It worked. there is still problem, so i could find out it that monitor is going to power saving mode then voice goes out and no view on monitor. I changed the power saving settings. And worked well. Thnx again.

  • Audi Bluetooth does NOT Work After Update 8.02 and neither my car charger

    aAfter Update iOS 8.02 Bluetooth. Audi does NOT Work - Connection is ok bit cant talk with Connection
    and also The car charter does NOT work

    Hi Lars - I had the same issue - found the help on audi-sport.net - link:
    http://www.audi-sport.net/xf/threads/iphone-6-not-functioning-correctly-when-con nect-to-mmi.227675/
    see page 2 of the postings under veeeight's suggestion (7 steps).  Pasted from the forum.
    1. Rename your new iPhone
    2. Delete all Bluetooth phone pairings from the Audi MMI
    3. Reset All Settings
    4. Reset Network Settings
    5. Reset Network Settings again
    6. Connect to WiFi on your phone (optional)
    7. Do the pairing with the car again.
    I was able to resolve this on my 2011 A4 with MMI.  That's after I have updated my iPhone 6 with 8.0.2
    Hope this helps you and anyone else having the same issues.

  • Home sharing does not work after update to snow leopard 10.6.4 and iTunes 9

    I am using home sharing since about a year without any problems. After updating to snow leopard 10.6.4 and iTunes 9.2 it suddenly does not work anymore.
    On my iMac and my Mac Book Pro I get error code 3259 and it tells me to check my firewall and to enable Port 3689.
    I did not change anything in the firewall settings, itunes on both allows data traffic in both directions. I also do not find any option to activate a port ( also wondering why this is suddenly now necessary)
    I deactivated home sharing on both machines and enabled it again. It still does not work.
    On both machines iTunes displays the the library on the left side but like said it is not accessable
    With Finder I can access the other computer from both machines without any problem.
    Any help to solve this would be very much appreciated

    first of all, if you are behind a router firewall, and have your network secured (WPA2 and a long, non-dictionary password made up of letters and numbers), you don't need the software firewall on your Mac(s).
    @ least turned if off for troubleshooting purposes.
    turn home sharing off on both computers, and make sure
    (a) both Macs have access to the internet
    (b) iTunes on both machines is authorized for the same iTunes account.
    turn home sharing back on on both Macs.
    does it work ?
    JGG

  • Help viewer does not work after update to 10.4.4

    Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

    Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

  • Solved rEFInd does not work after update

    Hello.
    Today, I updated rEFInd with yaourt.
    After the update, I copied the new files in /boot/efi.
    I rebooted and now rEFInd does not work.
    The only message I got is:
    rEFInd - Initializing
    After 2-3 minutes, the computer reboots and I got the same error message.
    To boot, I had to use the UEFI shell.
    First of all, is there a log file for rEFInd?
    It is not easy at all to debug it when we don't have any error messages.
    After that, I did the procedure to install rEFInd in /boot/efi twice without any success.
    Do you know what to do to solve my problem?
    Thanks for your help.
    Last edited by antoyo (2012-11-07 23:29:55)

    @antoyo: The old one is compiled using gnu-efi-libs, the new one is compiled using Tianocore UDK2010.
    Full package: http://dl.dropbox.com/u/9710721/refind- … pkg.tar.xz
    Src package: http://dl.dropbox.com/u/9710721/refind- … src.tar.gz (will compile only in x86_64 system)

Maybe you are looking for