The wifi feature has broken

I recently dropped my iphone and had the screen replaced. After that my wifi feature stopped working, is there any chance this could have affected it? My wifi only stopped working after I'd dropped my iPhone
Please help!

It's broken, what more do you need to know?
Was the screen replaced by Apple?  I'm going to guess the answer is no.
If it was replaced by Apple, take the device back to them for an Out of Warranty replacement.
If it was not replaced by Apple, either take the device to some 3rd party repair place or junk it and buy a replacement.  Apple will not touch the device after it has been opened by others.

Similar Messages

  • I cannot get the wifi feature on my iphone to switch on. I have just uploaded the latest Operating system but nothing has changed.  I have reset, again no change.  Any ideas?

    I cannot get the wifi feature on my iphone to switch on. I have just uploaded the latest Operating system but nothing has changed.  I have reset, again no change.  Any ideas?

    If you have an iTunes backup that includes the photos you may be able to extract them from the backup using a 3rd party utility such as http://www.wideanglesoftware.com/ibackupextractor/

  • I synced my Ipod to itunes now i can only double click the icons on the screen it seems that the swiping feature has been disabled, how do I get it back to normal? I've restored it but nothing has changed

    I synced my Ipod to itunes now I can only double tap the icons on the screen, it seems that the swipeing feature has somehow been disabled, Is there a way i could fix it or get it back to normal?

    Hi there,
    It sounds like you may have an accessibility feature called VoiceOver enabled. Take a look at the article below for more information on how to use VoiceOver as well as how to disable it.
    iPod nano (6th generation and later): How to use VoiceOver
    http://support.apple.com/kb/ht4317
    -Griff W.

  • TS1398 The wifi button has greyed out and will not open at all. I know this has been happening to a lot of iPhones six the io6 update. How to fix one very distressed daughter

    The wifi button has greyed out on iphone4s. What to do I have a very distressed daughter here?

    Heard about this strange my 4s is fine after updating.
    Back up the device to either itunes or cloud
    and try to restore the device

  • My macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does

    my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on

    Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
    If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
    - xia_us9

  • The wifi button has went to the off position and will not come back on. Any suggestions?, The wifi button has went to the off position and will not come back on. Any suggestions?

    The wifi button has went into the off position and will not come back on. Any suggestions?

    which button where?

  • I updated my iPod touch 3G to iOS 5.1.1 and the wifi option has greyed out. how can i fix this problem quickly ?

    i updated my ipod touch 3g to ios version 5.1.1 and the WiFi option has greyed out
    how do i fix it ??

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • OBE SQL Dev 1.5 New Features has broken link to file sqldevmngdb.zip

    Hi there,
    It appears that one of the file download links (*sqldevmngdb.zip*) in the Prerequisites for OBE Tutorial Oracle SQL Developer 1.5 New Features is broken.
    [http://www.oracle.com/technology/obe/hol08/sqldev_mngdb/sqldev15nf/files/sqldevmngdb.zip]
    Can you please repair this and update me when that has been done.
    Have a great day.
    Kind Regards,
    Gary.

    Gary,
    Thanks, I'll get that sorted, but until we do, (don't laugh), the second half of the link actually works.
    Sue

  • I need to buy a new charger for my iPad 2 as the original one has broken what do I need to look at I just need the lead I've tried a few but they not working what is the correct one I need please thanks

    Hi can anyone help please I need a new charger for my iPad 2 as the original lead that came with it has broken can anyone tell me where I can get one from and what is it I'm looking for as I have tried loads and they not working thanks

    This one is good:
    http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter

  • The scroll feature has stopped working on my laptop touchpad in Mozilla Firefox but not Internet Explorer.

    The scroll feature was working well on my laptop touchpad but has ceased to work in Firefox. It continues to work well in Internet Explorer. Help!

    Its due to the adobe reader add on. I removed adobe reader and installed foxit reader. Now everything seems perfect. My laptop model is model is Acer Aspire 5820 TG and I use synaptics driver.
    Solution: (Courtesy - iuliand)
    If you have issues with touch-pad scrolling in FF4 do this:
    1) disable Adobe Acrobat add-on and test if it works, otherwise
    2) install the latest touch-pad driver.
    Hope this will help others.
    Edit:
    If the above does not work, temporarily disable all add-ons in order to check if there is another one that may cause this.
    Also, make sure you update to the latest touch-pad driver from the touch-pad manufacturer site (very easy to do if you have a Synaptics). Most of the time drivers from notebook manufacturer support site are NOT up to date.
    Keep in mind that you may need to do both things (disable acrobat AND install latest driver). Both are possible causes and may occur at the same time, as it was in my case.
    Edit 2:
    If you have an ALPS touch-pad and none of the above works, check dog425's post below in this topic. He pointed out a solution found in this thread: https://support.mozilla.com/en-US/questions/791829#answer-163071

  • My iMac won't connect to the wifi it has been connecting to for a year.  All other devices still work.  Any suggestions?

    IiMac won't connect to the wifi anymore. All other devices still work with wifi any suggestions?

    Try the basics first:
       Change your router channel number.  Most times this works & is all you have to do.
    Disconnect & reconnect your modem.  unplug it for about 10 seconds.  Plug it back in.  Do the same for Apple’s routers.  Wait for everything to reboot.
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT4628  Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    Manually provided DNS server addresses are higher priority than DHCP's
    http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    ============================
    What to do when you can't connect to the Internet
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using a  Linksys router, contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.
    ================
    Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

  • The latest update has broken a lot of things...

    There was a big update which required me to restart and it did that whole initial setup thing again. However things like the Disk Cleanup Manager take ages to open now and programs like Nvidia's Geforce Experience don't open at all any more. Just lots
    of programs and things are broken and don't work any more. 
    I just tried to to remove something from home and my screen started flashing once I did it. I got it to stop by restarting and installed nvidia drivers to see if I could get the GeForce experience working again and then my screens started flashing again but
    won't stop this time. Having to type using my phone since I cannot use the pc any more until I reinstall windows. Weird how making changes now does this since that big update. Guess it is back to windows 7
    Notification icon constantly has a red circle with a white line going through it as it flashes. The screens aren't turning on or off, just flashing grey and then going back to desktop.
    Lots of werfault.exe in the task manager
    I noticed my caps lock, num lock and scroll lock lights haven't worker since the update too. Also as my screen flashes like this my cup runs at 50 percent and my c drive runs at 100, so windows is doing something. I disabled svhosts one by one and it stopped
    but I had access to nothing and then it blue screened

    have you use latest version of nvidia driver, you have a compatibility issue here. 

  • My wifi will not connect on my iPhone 4S. In the settings it won't let me switch the button over to turn on the wifi. Has this happened to anyone else?

    My iPhone will not connect to wifi. The button will not switch over. Has this happened to anyone else? Please help!

    Ksdow wrote:
    My iPhone will not connect to wifi. The button will not switch over. Has this happened to anyone else? Please help!
    It has happened to others, which you would have known by searching the forum.  This is very basic forum etiquette.
    Use the search button at the top of the page, or look in the MORE LIKE THIS area to the right.  You'll find your answer in no time!
    Best,
    GDG

  • Is there a way for internal DHCP Scope to release scope addresses when the wifi client has disconnected?

    DHCP scope is configured on a WLC 5508.
    I'm checking if there' a way for WLC to clear the dhcp leasing when a user is diconnected from wireless?

    Unless the client sends a DHCP Release upon disconnect, which is not mandaded in the protocol, the lease will simply remain until it has expired.  If you're concerned with running out of leases, you only have 2 options. 
    1. reduce the lease time of your dhcp scope
    2. increase the network size to accomodate more usable addresses.
    There isn't a way to force a DHCP address lease to be "cleared" from the WLC simply because the client was disconnected.

  • The "find" feature has stopped working correctly

    For the last few weeks when I use "find on this page" it doesn't work properly. Sometimes it will find the first 2 letters and then say that the word can't be found. I have even put in words that I can see on the page and it says that they don't exist. Even after it has located the first 2 letters. It seems like the problem exists usually between the second and third letter of search.
    I am finding this particularly annoying as I am doing internet research and may have a gigantic document that I may only need 1 phrase from and it is making it so that I have to read the entire document. Usually very interesting but REALLY slowing me down.
    Is it possible that I have accidentally changed a setting or something?

    Make sure that "Match case" on the Find bar (Edit > Find or Ctrl+F) doesn't have a check-mark.

Maybe you are looking for

  • Query regarding dummy column in OBIEE.

    Hi Gurus, I have a report where data is pulled at region level regions are say :A,B,C,D,E,F,G,H Now we have a reqmt from one of our client to group the regions and classify them as grades.But we don't have any grades in our database.This reqmt is for

  • Accessing EP 6 in PDA

    Hi, There are some users who will be accessing our portal through GPRS netowrk. As of now we don't have the actual GPRS set up so we are trying to check the portal access in a PDA phone which has got GPRS connectivity. We tried accessing our enterpri

  • IDOC  error : Entry in inbound table not found

    Hello all... Iam gettin IDCO error when im processing inbound IDOC (basic type :FIDCCP02 and message type:FIDCC2)  like.. <b>"Entry in inbound table not found..."</b> <b>in diagnosis:                                                                   

  • 4G system status page?

    Is there a system status page for 4G anywhere?  My Tbolt everyday or 2 drops to 3G or even 1x for a while, but today it's been stuck on 3G for several hours.  I'd like to see if Verizon's got a known issue before calling in.

  • Is VMWare Fusion 2.0.5 compatible with Snow Leopard?

    Anyone knows if VMWare Fusion 2.0.5 is compatible with Snow Leopard?