The wifi of iPad 2 does not working good, it always disconnect the Internet.

I don't know why my iPad always disconnect the Internet at home? While I use my iPod that it connect the Internet at home very strength, last month I brought iPad to the apple store at fashion valley to ask, one young man told me that because the Internet signal at my house is not strong. But if it not strong, my laptop and my iPod work fast.

Well, I was expecting some help other than "go to Google." You can't offer any suggestion besides that? No troubleshooting? Aren't you an Apple expert? I thought I'd come here for advice first.
I am aware Apple and all electronics manufacturers consider their devices unserviceable, but I wasn't about to pay Apple or a shop $200 to fix the screen.
Thanks.

Similar Messages

  • I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    Kowhai wrote:
    Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
    Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

  • HT4623 I updated to ios 7.1 on Thursday.  My ipad basically does not work any more.  I am running around in circles on this site and on other "forums" trying to fix.  ???  Don't have time for this.....

    I updated to ios 7.1 on Thursday.  My ipad basically does not work any more.  I am running around in circles on this site and on other "forums" trying to fix.  ???  Don't have time for this.....Any advice appreciated.

    give us more to work with in terms of info then "basically does not work any more"
    it can be from it's on fire to the a key on the onscreen keyboard don't respond

  • Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in

    Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

    When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

    Thanks for the reply. I never get the option to "Restore Previous History" from History. I don't even have the box checked that asks to delete the history when Firefox closes. I don't know what's wrong, no matter what, I always lose everything. I have the box marked "Show my windows and tabs from last time" for when I open Firefox, but it never shows that, just my homepage. Also, when I check my History, it only shows the pages that I opened since I started Firefox, nothing from before. Even if I were to open up 10 pages now, close Firefox, and open it, the history would only show the homepage that opened this time, not any of the 10 pages that I opened 5 minutes ago.

  • SWP 6.4 install on second computer in wifi WIN 7 network does not work for me.

    Installed on my desktop, works fine. Installed on my Laptop, does not work.
    As administrator I see the clip window, can open and close it but no menu, so I cannot use it.
    As user the switch in the toolbar is there but it does not activate the clip window.
    On both machines the OS is Win 7 Home Premium, the printer is the Smart 109B. Printing through Wifi to my printer which is attached to my desktop as a USB-printer works fine. But i take it the real printing is not involved in working with SWP. Maybe networking but I cannot find any hint. Pse help me.
    Henk

    Hi Tomasz,
    as I figured out, this problem is related to the usage or measurement of the InDesign-document  at least for me.
    I create two portrait-oriented InDesign Layouts.
    For the first I choose Print-usage in the New Document-dialog.
    For the second I choose Web-usage in the New Document-dialog.
    The first will render as bitmap (wrong).
    The second will render as PDF (correct).
    Folio- and Article-Image-Type is set to PDF in both cases.
    Strange behavior.
    Regards
    Ingo
    Am 06.09.2011 um 15:52 schrieb Tomasz Kuczborski:
    OK. Ingo, have a look:
    attached below is what you see whenever you create new article. So, if you create 10 articles, you have 10 opportunities to set the rendering intent differently. I think this is wrong, as the image format setting applies to the whole folio. Or maybe it has changed recently? If not, the least what should happen is a warning, that your new choice changes the actual setting.
    Cheers,
    Tomek
    http://forums.adobe.com/servlet/JiveServlet/showImage/81969/ScreenShot2011-09-06at15.46.58.png
    >

  • How to refund a app on an iPad that does not work

    Today I purchase flash player and it does not work, how do I get a refund?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
    http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Delete the app and redownload.
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
    Adobe has not made a version of Flash for the iPad.
    Kappy explains why. https://discussions.apple.com/message/19446567#19446567
    5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
    Top 4 browsers supports flash player on iPad and iPhone
    http://mashtips.com/flash-player-ios/
     Cheers, Tom

  • Wifi on Macbook Pro does not work when Windows laptop connected

    Does anyone know why this is the case or how to fix it? My wifi works great until my wife turns her windows laptop on and logs on the to the wifi. At that point, mine does not work until she shuts her computer down. Any ideas?

    you both probably have the same IP address....
    set your laptop to DHCP or type in another IP address...

  • Verizon iPad 2 Does not work in Alaska

    Well, yesterday I found out my Verizon iPad 2 will not connect with Verizon’s system in the State of Alaska (I work here but live in Oregon). No where in Verizon's or Apples web sites could I find a disclaimer that an entire State would be off limits.
    It's not that there's not a signal to be had, Verizon iPhones work fine. It's that if you are a non contract customer ie: month to month, there policy will not allow you to connect.
    Apple said they will refund my money and Verizon already has (Yes they allowed me to set up an account through the iPad while in Alaska & then denied me access.
    I have not been able to contact AT&T to see if they have the same restrictions on service.
    They (Apple/Verizon) should have a disclaimer about excluding a whole state from service before purchase...
    & yes I consulted their coverage maps before buying... Every indication is there is coverage.

    Verizon uses roaming through Alaska Communications System (ACS), which is probably why the month to month Verizon contract isn't compatible. Yes, Verizon should have a disclaimer, Apple on the other hand has no control over the cell phone carriers rules.
    Although if Apple will refund you your iPad purchase that's good.
    I don't believe AT&T has the same restrictions, they have their own towers and do not roam off an Alaskan phone company.
    Verizon is coming to Interior Alaska by 2013 though, they are getting permits for putting up towers.

  • IPad iMessage does not work after ios6 installed

    Tried setting and turn on iMessage also FaceTime sign out

    Just Reboot and sign in again to you apple account. If this may not work reset your nwtwork settings.

  • Mac wifi signal to iPhone does not work.

    When I try to send out a wifi signal from my MacbookAir (connected to internet via ethernet, VPN) to my iPhone I have some difficulties.
    The wifi network I created appears under the wifi networks on my phone.
    I am able to sucessfully connect to it, and even the icon of 'connected to wifi' shows up.
    But yet, I can't access the internet? How is this possible?
    Could the VPN network be the problem?
    Please help me

    Hey axelle123,
    Thanks for the question. Let’s try sharing your internet connection via Internet Sharing instead, to help isolate the issue. With this method, you can share your Ethernet connection via Wi-Fi to other devices. To start, let’s open System Preferences on your Mac and follow these steps:
    OS X Mavericks: Share your Internet connection
    http://support.apple.com/kb/PH13855
    1. Open Sharing preferences if it isn’t already open, then select the Internet Sharing checkbox.
    2. Choose the Internet connection you want to share from the “Share your connection from” pop-up menu. For example, if you’re connected to the Internet over Ethernet, choose Ethernet.
    3. Select how you want to share your Internet connection in the “To computers using” list. For example, if you want to share your Internet connection over Wi-Fi, select Wi-Fi.
    If you share your Internet connection using Wi-Fi, click Wi-Fi Options, then give your network a name and password.
    Thanks,
    Matt M.

  • Running PC with W7 x64. Upgrdaed to iTunes 10.7. Upgraded iPhone 4s to IOS 6. Caqnnot backup. iTunes says session cannot be started. Does not recognize apps on device. Device shoes up on WiFi then disappears. Does not work either on USB. ITouch and iPad .

    After upgeading to iTunes 10.7 on my PC with W7 x64 and IOS 6 on my iPhone 4s, I cannot backup. It says sesson cannot be started. Also cannot recognize apps on iPhone. Further, with WiFi and powered on, the device apperas briefly in iTunes then disappears. Same for iTouch and iPad with IOS 5. How do I resove this? More importantly, how does Apple resolve it? Thanks. . JAD.

    AphexTwin wrote:
    - no Apple input?
    Of course not.  Didn't you bother to read the TOU of this forum?  This is a USER TO USER technical support forum.  Apple doesn't post here.

  • Wifi on macbook pro does not work

    Any idea where is that airport express card on my macbook 15inch duo 2.4 pro late 2009.? Where can I find a detailled guide on the parts in that laptop? Where can I buy used or new parts to replace them?
    Thanks

    Hi
    Try the following
    Turn the modem off and on and reset the modem hardware
    Turn off your DSL or cable modem for a few minutes, and then turn it back on. Some ISPs recommend that you unplug the modem’s power cord. If your modem has a reset button, you can press it either before or after you turn the power off and on.
    Important: Instructions that refer to modems do not apply to LAN users. LAN users might have hubs, switches, routers, or connection pods that DSL and cable modem users do not have. LAN users should contact their network administrator rather than an ISP.
    PPPoE Connections
    If you are unable to connect to your Internet service provider using PPPoE (Point to Point Protocol over Ethernet), make sure you have entered the correct information in Network preferences.
    To check your Network preference settings:
              .          1  Choose Apple () > System Preferences.
              .          2  Click Network.
              .          3  Click Add at the bottom of the network connection services list, and choose PPPoE 
from the Interface pop-up menu.
              .          4  Choose an Interface for the PPPoE service from the Ethernet pop-up menu. Choose Ethernet if you are connecting to a wired network or AirPort if you are connecting to a wireless network.
              .          5  Enter the information you received from your service provider, such as account name, password, and the PPPoE service name (if your service provider requires it).
              .          6  Click Apply to make the settings active.

  • My mic on my ipad mini does not work, how to activate it

    I have a new ipad mini 64Gb 4G. Using skype my partner at the other end doesn't hear me. How can I activate the built in mic?

    Hi Austin XQ,
    Thanks for visiting Apple Support Communities.
    Based on the information you have provided, it sounds like your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Best,
    Jeremy

  • I updated my 3G iphone today and now my wifi within my home does not work, it stays on 3G.  any suggestions?

    I updated my iphone today, 3G, and I am now unable to get wifi within my home.  It stays on 3G.  any suggestions?

    reboot your router.
    on your phone - settings - general - reset - reset network settings.

Maybe you are looking for

  • Ugh!   Safari won't open - see error report here

    Help...? When I open Safari I get an error saying: "The application Safari quit unexpectedly. Mac OS X and other applications are not affected. Click Reopen to open the application again. Click report to see more details or send a report to Apple." C

  • Given a XSD, and a XPath- ways to find the type of the XPath leaf element

    Given a XSD, and an XPath (refering to an element in a XML document satifying that XSD), is there an utility which return the "type" of the given XPath element. One approach just to traverse the XSD tree, generated by the XSDBuilder, as per the eleme

  • Cannot Install Sql Server 2008, Gives The Error "Database Engine Services Failed"

    I cannot install Sql Server 2008 R2 on Windows 8. Tried many times but failed because it gives the error "Database Engine Services Failed". Sql files cannot be corrupted because i can install the same setup on Windows 7 and i can connect to databases

  • Appending namespaces attributes

    Hi there, We have a proxy service (pswsdl) and business service (bswsdl) I am currently working on transforming xml payload from proxy service (pswsdl) to the xml as compliant with business service (bswsdl). I grab the payload from the proxy service

  • Where is the "Last Modified Date"?

    I'm in Report Builder trying to create an Incident report that includes the "Last Modified Date" value.  However, I can't seem to find it in any of the views using the Report Builder wizard.  Can someone point me to the right source for that value? T