The window couldn't be opened because your computer is low on memory. Please close some windows and try again.

When attempting to reply to or forward email, or to compose a new message in Outlook OWA I receive the following error message: "The window couldn’t be opened because your computer is low on memory. Please close some windows and try again." This
occurs even if the web application is the only window open.
My operating system is Windows 7.

Hello,
According to the error message, it should be a Windows issue.
Try OWA and see if we can send/receive email properly. If OWA works fine, I suggest we post this question to Windows 7 Forum below:
http://social.technet.microsoft.com/Forums/en/category/w7itpro
Thanks,
Simon Wu
TechNet Community Support

Similar Messages

While trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

while trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

It's absolutley scandalous that a company with Apple's resources can let this happen. They should have staggered the release by region rather than opening the flood gates. The upgrade itself took me about 10 attempts to download it, and then I thought I was home free. That was until it rebooted and won't activate. It's over 2 hours now.
Scandalous!

Memory could not be allocated for the activation process. Please close all applications and try agai

I have just had a Windows XP failure and took the opportunity to replace with Windows 7. After I reinstalled PhotoShop CS(1) the message "Memory could not be allocated for the activation process. Please close all applications and try again" is shown and forces PhotoShop to close. I have 4Gb of Ram installed and a total of about 10Gb of Page File space on three partitions of a 500Gb HDD. The system is not heavily loaded! However, I cannot access Photoshop to check scratch disk allocation. How to fix???
Back to top

Yes, there are many forums, and it can be confusing. Your question has the best chance of being answered if it is in the proper place. I think it is there now.
Pattie
http://forums.adobe.com/message/5092533#5092533 is your post address
Download and installation forum:
http://forums.adobe.com/community/download_install_setup

Memory could not be allocated for the activation process. Please close all applications and tr again

Hello,
Just purchased a new laptop:
Intel Core 2 quad
4gb memory
1000 HDD
Photoshop CS 8.0 disc dead/scratched/unreadable. So I copied my Adobe folder from my Program Files Folder on my PC and pasted on laptop. When I try and run PS I get the error message "Memory could not be allocated for the activation process. Please close all applications and try again". Which I do then Photoshop closes.
Can anyone help (in layman terms please)?

Not really. You are essentially FUBARd. Without a proper install, there is usually no way on to get the licensing stuff working. You might be able to get there by installing any other CS product, so PS could latch on to the licensing system that would be already in place, but otherwise it's a lost cause. Simply copying over the executables is normally not enough. I will admit though, that I skipped CS, so there may be some tool somewhere that I don't know about can do this post facto...
Mylenium

HT200261 Configurator Error. Apple Configurator could not open your library.The file couldn't be opened because it isn't in the correct format.

I was using configurator without trouble. Unfortunately, my battery died and my computer went down. I plugged my computer in, restarted it and tried to open configurator. Now this is the error I am getting. Apple Configurator could not open your library.The file couldn’t be opened because it isn’t in the correct format. How do I fix this?

Thank you for responding. The number 2 after the file final cut events is temporary so I can copy it to another drive while I am working on this. . i got a new message that reads...
Final Cut Pro must restore or move corrupted databases before opening.

The restor pocess did not succeed because your computer cannot connect to the server - Windows Server 2012 R2 Essentials Experience

Hi all
I've been running Windows Server 2012 R2 with the Essentials Experience in test for a Windows 8.1 client environment, on an HP ProLiant MicroServer N54L. Overall I've found the Essential Experience set-up over WHS2011 and WHSv1 okay; still looking to extract
any real value over the former versions.
This box has been up and running for a few months now, with client backups of a Win 8.1 box scheduled and running successfully every day. However when trying to conduct any file restores from the backups, to the client, I receive an error dialog once I go
through motions from the Dashboard:
On the 'Devices' tab, right-click the appropriate client and select 'Restore files or folders for the computer'
'Restore Files of Folders' dialog pops up, asking me to 'Choose a backup' from the list of all the backups that have run
Select any one in the list - have tried numerous backups; automatic, manual, etc. same result every time
Brings up the dialog to 'Choose a volume', choose either C: or D: partitions of the same fixed drive - again, no difference which one I choose, the outcome is the same
'Opening the volume' dialog starts, with progress bar, runs to about 4% complete the pops up the dialog 'The restore process did not succeed'. Full error in the dialog, "The restore process did not succeed because your computer cannot connect to the
server. Make sure that the computer is connected to the networkm and then try again
If my computer cannot connect to the server - how can I get that far? How can I open the dashboard, select a client, select from a list of backups, select a volume to restore, etc. What is going on here?

Hi,
Please check if a "host" entry for the server is added to the client. For more detailed information, please refer to the threads below:
Unable to Restore files or folders from a Client Backup
http://social.technet.microsoft.com/Forums/en-US/d1d001bd-20c5-4f09-861d-526c31567963/unable-to-restore-files-or-folders-from-a-client-backup
Can't restore anything
http://social.technet.microsoft.com/Forums/windowsserver/en-US/98e269b5-2bd1-449e-a213-e386ae15266f/cant-restore-anything?forum=winserveressentials
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The file couldn't be opened because you don't have permission to view it

Everytime I time to open a PDF file in Preview I get the msg, the file couldn't be opened because you don't have permission to view it. I have checked the GET INFO and all permissions are correct. Does anyone know how to solve this problem?
Thank you.

Back up all data.
Quit the application, if it's running.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.Preview
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu. A Finder window should open with a folder selected. If it does, move the selected folder—not just its contents—to the Desktop.
The folder you're moving has a name that begins with "com." It is not the subfolder named "Data" or anything else.
Launch the problem application and test. If it works now, delete the folder you moved. Otherwise, quit again, and put the folder back where it was, overwriting the one that may have been created in its place.
Caution: If you delete some or all of the contents of the selected folder, but leave the folder itself in place, the application may not launch. Deleting the folder will cause it to be rebuilt automatically.

I can't seem to open (view) my photos. I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info."

I can't seem to open (view) my photos. I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info." I have never had this happen before? Thanks!

Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #1, Repair Permissions.
OT

Cannot open a downloaded pdf file..."The file couldn't be opened because it isn't in the correct format."

I have had this problem several times lately: I cannot open a downloaded pdf file. The error message reads: "The file couldn't be opened because it isn't in the correct format." But, of course, it is a pdf file.

My MacBook Pro (2.5 Ghz Intel Core i5) is running OS X 10.9.4. Here is what happens when reading an online user manual that I want to save to the Desktop and read later as a PDF file on my iPad or phone. With Safari I will select "Export As PDF" and the file shows up on the desktop. Even after multiple trials, there will be a dialogue box indicating the file cannot be opened. If I check the file info, the size is "zero." Trying to save the file as a pdf using the Print menu yields the same results. I have tried both of these methods using Preview, Adobe Reader, and PDF Pen Pro. This strange behavior also occurred several weeks ago and I finally abandoned the effort. But when the same thing happens twice, it becomes an issue that needs to be resolved.

Cannot open attachment because your computer is low on resources.

I'm getting the error "Cannot open attachment because your computer is low on resources." when trying to open an attachment from OWA 2010 in Internet explorer (all versions). My computers is Windows 7 x64.
I've tried the regsvr32 fix for the ieproxy.dll and jsproxy.dll (jsproxy.dll is not there, but i hear this happens and is normal for some people) to no success.
Any help would be greatly appreciated.

Hi,
your company system administrators allocate the amount of disk storage on user drives..(usually mapped to drive G:)
'low resources'=='low disk space'
Questions regarding Internet Explorer 8, 9 and 10 and Internet Explorer 11 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions. If you are a consumer looking for answers or to
raise a question, it's highly recommended you head on over to http://answers.microsoft.com
Rob^_^

When in firefox this comes up-your computer is low in memory. Save your files and close these programs.

The available RAM memory on our computer no problem. And we have over 50 gigs of hard drive memory. We have also cleared off history files and open programs. But when my wife plays games on facebook, farmville and the new one just out, a pop up says 'your computer is low on memory. Save your files and close these programs- Fire fox. Our internet security is fully functional and a complete diagnostic has revealed no malware, viruses, trojans, on our system.

Hello,
According to the error message, it should be a Windows issue.
Try OWA and see if we can send/receive email properly. If OWA works fine, I suggest we post this question to Windows 7 Forum below:
http://social.technet.microsoft.com/Forums/en/category/w7itpro
Thanks,
Simon Wu
TechNet Community Support

Trying to install iTunes on Windows 8.1. Apple Application Support was not found. Error 2. Uniinstall iTunes and try again, does not work. Is there a fix?

Trying to install iTunes on Windows 8.1. Apple Application Support was not found. Error 2. Uniinstall iTunes and try again, does not work. Is there a fix?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Every time i try to update software it asks me to close Microsoft Database Daemon SyncServicesAgent Close these applications and try again. i cannot close them becase i cannot find where they are open help as i cannot update

every time i try to update software it asks me to close Microsoft Database Daemon SyncServicesAgent Close these applications and try again. i cannot close them becase i cannot find where they are open help as i cannot update

You can find how to here:
http://www.bing.com/search?q=close+sync+services+agent
http://www.bing.com/search?q=what+is+mac+os+x+sync+services
Mac OS X: Resetting the SyncServices folder - Apple - Support
http://support.apple.com/kb/TS1627
Aug 17, 2012 · Choose Reset Sync Services. Click Reset Sync History. Test for the ... Resetting SyncServices resets your Mac OS X User Account's Sync settings and …
Sync Services: Advanced troubleshooting for contact and calendar ...
http://support.apple.com/kb/TS2481

Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later.

Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network. What gives?

Try disabling your firewall; both on your PC and the external Firewall/Router.

"could not start the camera. Close other apps and try again"

It shows up saying could not start the camera. Close other apps and try again when i try to open the camera but no other apps are open.
how do i fix this?

Hi.....i am new here and is not sure as yet how to start a new thread.
I have a bb curve 8310 and think i may ave caused my camera to stop working via uninstalling it....if that is possible.
wen i click on di camera it opens, makes shutter sound and flashes wen i click di trackball but after that it doesnt show di picture that it supposedlt took.
Before this happened i was foolin around with the hide a folder option in pictures and not sure what i did wrong.......my video is not clear either.....please can you help me .....in addition i do not get any of those messages that i see the other users saying that they got for example could not start camera....i am not getting anything like that. all dat i get is a white screen......

The window couldn't be opened because your computer is low on memory. Please close some windows and try again.

Similar Messages

Maybe you are looking for