The windows experience index for your system could not be computed on bootcamp.

My Macbook pro is slow on WIN7.
Is there i am missing any thing?
I wanted to calculate Windows Experience Index (WEI), but when i try to, i am getting below error message.
"the windows experience index for your system could not be computed"

Moreover, my Macbook is getting hot when i use in bootcamp.

Similar Messages

What are the Windows Experience Index numbers for Windows 7 running on a MacBook Pro 13 Retina Display?

I am curious to know what speed those running Windows 7 on a MacBook Pro 13" Retina Display are obtaining. I am interested in purchasing a MacBook Pro 13" Retina (i7) and will be running Windows 7 frequently since some of my business software only runs under Windows. I have heard that the best PC is a Mac. Just wanted to confirm the Windows Experience Index values are for those MacBook Pro users are seeing when running Windows 7. The Windows 7 Experience Index numbers include one for Processor speed, Memory (RAM) speed, Graphics speed, Gaming graphics speed, and Primary Disk speed.

Hi - I connected my superdrive but it does not seem to be working - now all I get is a black screen with the prompt - no bootable device; insert boot disk and press any key.
Any thoughts on this? I put an ISO image on my desktop and also created an image on a USB drive - however it has encryption software on it which did not get overwritten so Im not sure if this is why that won't boot.
Does anyone know if the Superdrive can't be used?
My macbook is 3 weeks old - it is all the latest and greatest stuff...

Apple Configurator: The configuration for your iPad could not be downloaded from organisation . Invalid Profile.

Good afternoon,
I am really struggling with a deployment of 10 iPad Minis.
The iPads are brand new and I have downloaded and installed Apple Configurator onto our Apple Air laptop.
I have configured Apple Configurator in the following way:
Under Prepared:
Settings
Name is ticked with 'Number sequentially starting at 1'.
Supervision is ticked to on, Allow devices to connect to other Macs is also ticked.
Update iOS is set to "When update is available". Erase before installing is ticked.
Restore is set to "Don't restore backup".
No profiles are listed in the profiles section.
Apps
I have copied in some appropriate apps.
Setup
Skip: Restore, Passcode, Siri, Touch ID, Apple Pay, App Analytics all ticked.
I have not configured Device Enrollment.
In "Configure Settings..." Device Enrollment is not configured.
After preparing my iPads, they all connect and prepare correctly. When I select any iPad and unlock it, the following happens:
Hello, slide to setup
Select language, UK selected
Select Your Country or Region, UK selected
Choose a Wi-Fi Network, correct network selected and authenticated
Location Services: Enabled
Configuration, "<organisation> can automatically configure your iPad". Apply Configuration or Skip Configuration. Apply selected.
Configuration, "The configuration for your iPad could not be downloaded from <organisation>. Invalid Profile.
Apple Configurator is showing no errors, have tried Supervise>Reset, makes no difference.
Have skipped configuration and erased iPad before trying again, same problem.
Any suggestions would be really appreciated.

FYI - This is an iPad user to user forum. Apple doesn't read the forum posts.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

The Application Data folder for Visual Studio could not be created

Hi! My laptop was working fine but someone recently installed Malware Bytes to my laptop and supposedly found 4 problems and "fixed" them afterwards Visual Studio Professional 2013 and Chrome stopped launching. When I realized this happened I uninstalled
Malwarebytes but it was too late. Every time I tried launching Visual Studio I would get a message that said something like: "Two or more components could not be found. Please reinstall". I did a "fix" on Visual Studio but this solved nothing
only changed the message, the new message was "The Application Data folder for Visual Studio could not be created" so I uninstalled the program and all the extras I found on my Control Panel. Downloaded Visual Studio Community 2013 I'm trying to
install it but I got the same exact message again. Why is this happening? What does it mean? Before I uninstalled Visual Studio Professional 2013 I looked for ways others solved it but nothing seemed to work. Please help. Thanks!

Hello Danny,
The Malware Bytes may have already modified some files/registry values/environment variable which is used by Visual Studio and may be the setup cannot create it for you again.
Please try the workaround here in this blog:http://tutewall.com/application-data-folder-for-visual-studio-could-not-be-created/ and remember to backup your
registry key before you do any actions to the registry table.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The OLTP source 3FI_SL_J2_TT for source system BM4CLNT100 not present

Hi All,
iam trying to load data from r/3 for the DS 3FI_SL_J2_TT , when i see in BW , the transfer structure is inactive in Dev system. So i activated the transfer struc. but after activation also its shows as inactive.
and also iam getting this error message : "The OLTP source 3FI_SL_J2_TT for source system BM4CLNT100 not present".
I have checked in r/3 side , the DS is available and is in active. I have replicated the DS also in BW. but no luck.
could you please let me know why this error occured.
Thanks,
Ravi.

Hi,
RC on Source system and perform the action check if connection is ok the try to activate that in se38
RS_TRANSTRU_ACTIVATE_ALL.
Regards,
Satya

CVS NI1454 Labview RT 8.2, NI-VISA probleme : "NI-VISA loads modules... At Least one passport on your system could not be loaded"

Bonjour,
Je cale sur un problème avec le système de vision NI-CVS 1454.
J'ai installé la version Labview 8.2 RT dessus car je n'avais les licences que pour cette version.
Dans mon programme, la caméra doit réagir sur des signaux digitaux pour effectuer une analyse 1 ou une autre (analyse 2).
Comme il me fallait connecter des I/O j'ai utilisé les fonction de NI-Imaq I/O > Open I/O.
La caméra ne sait rien faire avec cela car je dois installer des softwares sur le système.
J'ai donc été via Ni-MAX installer le soft NI-RIO FCF et cela demande automatiquement pour installer NI-VISA et NI-VISA SERVER
Mais lorsque cela est fait j'ai un message à chaque démarrage du CVS :
"NI-VISA loads modules(Passports) ro access GPIB, Serial, VXI, etc.... At Least one passport on your system could not be loaded. You should run the Measurement & Automation Explorer"
Je ne fais que cela depuis 2 h mais je ne trouve pas le problème..
est-ce la compatibilité des versions? Dois-je travailler autrement pour les I/O surle CVS?
Merci pour votre aide.
Seb

Bonjour,
Avez-vous essayé les tests proposés par Sami Fatallah ci-dessus ? Si oui quels en sont les résultats ?
En effet je pense qu'une réinstallation du CVS (en safe mode) serait judicieuse.
En ce qui concerne la configuration logiciel, tout semble correct.Vous n'avez donc en effet pas besoin du lien que je vous ai envoyé dans mon précédent message. Toutefois une réparation comme suggérée ci-dessus pourrait-être utile.
Pour ce qui est du fonctionnement de IMAQ I/O, il vous permet d'accéder aux entrées/sorties via le FPGA. Cependant cela est transparent pour vous car un bitfile est généré à l'installation. Vous n'avez donc pas besoin de LabVIEW FPGA ni de programmer le FPGA. Plus de détails ci-dessous :
http://digital.ni.com/public.nsf/allkb/98EE3EF87B2058F2862575BC005EDBC6
Quel type de caméra connectez-vous à votre CVS par ailleurs ?
http://forums.ni.com/t5/Machine-Vision/CVS-1456-Connection-Problems-VISA-error/m-p/1041051?requireLo...
Voici un lien utile pour le diagnostic et la résolution de problèmes sur les CVS en général. Il ne vous sera d'aucun utilité dans le cas précis, cependant je vous conseille de l'ajouter à vos favoris.
http://digital.ni.com/public.nsf/allkb/35D5C8DB4F1A66F5862571EA005D2FE3
N'hésitez pas à nous tenir informés de l'évolution de la situation.
Bien cordialement,
Yannick D.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Du 30 juin au 25 août, embarquez pour 2 mois de vidéo-t'chat ! Prenez place pour un voyage au coe...

The Active X control for Flash Player could not be registered

The only problem i seem to be having is with the yahoo instant messanger (trying to play the music player) a pop up comes up with a Internet explorer installer add-on for adobe flash player 10. I have this already installed on my computer.
When i try to redownload it is when i get that error ___Active X control for flash player could not be registered__.
Is there somthing wrong with internet explorer cause i never use it. The only browser i use is Firefox ( i dont even want IE) I dont even think its installed on my computer any more. its missing from control panel>uninstall programs. Is this the problem.
Please any help would be great

Please do not post the same problem multiple times!

TS3183 Why am I unable to download from the AppStore ? It connects to the iTunes store but says "your request could not be completed "

Unable to download certain apps from the AppStore

Click here and request assistance. That message means to contact the iTunes Store staff and not to post in these boards.
(98631)

Lost Beats Audio Control Panel, Windows Experience Index and HP Power Manager on fresh install...

HP Pavilion m6-1035dx, product B5S06UA#ABA
Please help! I installed a 240gb SanDisk Extreme SSD and a fresh install of Win 7 home premium 64-bit OEM. I did not reinstall the factory OS and all that goes along with it. I have managed to reinstall all drivers (it seems) but am having the following problems: 1) I have installed IDT HD Audio Driver sp56953 but it does not provide the Beats Audio control panel, any idea how to get it? 2) The Windows Experience Index will not provide a performance evaluation, something in the system is providing it with an error message when it attempts to rate the system and it stops. 3) I have installed HP Power Manager sp57398 and can bring up the control panel but the changes I indicate will not stay applied, when I bring up Power Manager again it show that no selections are made. I knew this fresh install was going to provide headaches, please help if you can. Thanks.

I suspect this may all be related to a common cause.
When updating the windows experience index, what is the error message you receive?
Has the video card driver been installed? It is necessary for the windows experience index to complete.
Also, ensure the HP Software Framework is installed. It is under the Software Solutions category.
You did a clean install of Windows 7. Has all the software and drivers for Windows 7 from HP been installed? Here is a link should you need it.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Error: Your request could not be completed because a failure occurred while the report was being processed.

Post Author: sagimann
CA Forum: Deployment
Hello,
I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
My env is:
Solaris 10 64 bit
Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
Important bouser env:
ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
TNS_ADMIN=$ORACLE_HOME/network/admin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
I reboot the box, then start BO like so:
cd /opt/reporting/bobje
. setup/env.sh
./mysqlstartup.sh
./startservers
./tomcatstartup
Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
Error:
Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
May 5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
pls advise,
thank you.

The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
The explanation, from a comment in the above linked blog post:
"To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
Edited by: abirdman on Feb 3, 2012 9:49 PM

GT60 2OC - Windows Experience Index scores - Question!

I had a MSI GT70 0NC before this one and now I'm a bit confused with the Windows Experience Index on the graphics and HDD scores, on the GT70 the graphics score was 7.3 and 7.3 (Nvidia GT 670m) and on the MSI GT60 2OC I get 7.2 and 7.2 (Nvidia GT 770m), is this score good? I mean that I get lower score on a new/better graphics board?
The other question is about the 2 Msata drives in raid 0, the score on the old one was 7.9 (with a Samsung 840 Pro 256GB SSD) and now with the 2 Msata in raid 0 I get 7.8, is this score good? What is better: the 2 Msata or the single Samsung SSD? ...

I've contacted MSI UK sales department and was advised to try with customer support ( [email protected] ) and now I'm waiting for an answer... meanwhile I had some time to test and install the Samsung 840 PRO (removed the 750GB HDD) and made some tests on all drives, this is what I got using CrystalDisk Mark and Samsung Magician:
The 2nd picture is made with RAPID mode activated (it was looking a but too boosted on CrystalDisk Mark)
Now the laptop feels again fast and "furious" the bad part is that I don't have any other space to keep my files at the moment, just the 120GB from the 2 mSata and what is left from the SSD... I hope I can get an SATA board so I can use the SSD as Primary and the HDD as secondary/data drive.

Pandora Radio no download. Says "Your request could not be completed." for original iPad

I cannot download the pandora app. I click on the "download now" button on their site when I am on my iPad, but when I get to the app store is says "Your request could not be completed." I looked for it on the app store and could not in it anywhere. Downloaded the newest OS, still nothing.

Never mind, figured it out. Because I had a Canadian apple ID, has to be American.

My Experience With "Your Purchase Could Not Be Completed"

About two months ago, the Apple store hit me with the, "Your Purchase Could Not Be Completed" message when I tried to rent a movie. I tried the obvious remediation steps, like switching the credit card, changing the device, and even trying a different Apple ID. Nothing worked. I contacted Support, and initially, I was told that I violated one of the T&Cs in the Apple Store agreement. I pressed a bit on Support because I was confused (what did I do wrong?), and then I received a message to try my purchase again in 30 minutes. After 30 minutes, the problem went away. Hurray!
Since then, I have run into the problem perhaps 15 times. Each time, I have contacted Support, and each time, I am told to wait for 30 minutes as the appropriate changes had been made to my account. I've asked, but so far, I haven't received an answer to my question about the core of the problem.
One thing to add -- when the problem pops up, usually one week after the previous occasion, the problem affects every device and Apple ID in the house. I wonder if the problem is related to me.
When this probem first occured, there were very few mentions of it on the Internet. Now, two months later, there are 2 pages of Google hits.
I hope this helps! Hopefully the good folks at Apple get enough support calls that they triage this weird problem.
Good luck from me, my MBP, iPad, iPhone, Apple TV, and iMac!
paul

usually the message says something like "your purchase could not be completed. for assistance contact itunes support"
in any case, doing so is going to be the best thing / http://www.apple.com/support/itunes/contact/

TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

How to resoved if "your iphone could not be activated because the activation server is temporarily unavailable"?

i was about to update my iphone 3GS to itunes. For some reason i removed my phone while updating.
afterwards when i was about to open it first will appear the language selection then country or region
then Choose network last "activitating your phone" after that the message will appear that "your iphone could not be activated beacause activation server is not available " same in wi-fi and itunes.

If you tried again after an interval and same message appeared =>
Your iPhone was unlocked unofficially. Update has locked it again to the Original Carrier. Insert their SIM to proceed ahead.

The windows experience index for your system could not be computed on bootcamp.

Similar Messages

Maybe you are looking for