The windows freezes DURING iTunes installation.
i have Sony Vaio VGN-N11M, 32Bits. i used to run windows XP and iTunes was working fine, after installing windows 7, i tried to install iTunes but it freezes during installation, and i have to reboot.
i Created a New User Account but the same problem happened, also Removed iTunes Plug-ins, checked the Conflicting Processes and Disconnected the computer from the Internet whilst installation but still the same thing keep happening.
i though it maybe because i had old slow RAM so i upgraded to 2GB RAM but still the same problem. i havent updated/backed up my phone for two month and the phone now is being funny too
i need help
mmotil wrote:
I'm having the same issue trying to install a new out of the box copy of XP home.
It says "session3initializationfailed" I then have to reboot with the power button. It does it every time. The Windows is SP2.
Ditto for me. BootCamp fails to install XP Home SP2. I have a legal full version bought from Best Buy. Partition is created fine, but get this error when Windows is being loaded: SESSION3INITIALIZATIONFAILED.
I have no clue what to do, other than purchase Vista Home Edition and give it a go.
Similar Messages
-
During iTunes installation, when it comes to installation phase "Registering iTunes automation server"... I am getting following error message:
"Microsoft visual C++ runtime Library"...
"Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe"
"R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
My system is Windows 7 Enterprise - Service Pack1Check the user tip below.
https://discussions.apple.com/docs/DOC-6562 -
How can I change the window size of iTunes? Used to be easy before installing Mavericks.
How can I change the window size of iTunes on my iMac? Used to be easy before installing Mavericks.
If you want to make the itunes tab so you can see the dock
you press the
esc
button if your in full screen mode
if you want to get into full screen mode you press the arrows facing away from eachother in the top right corner
there is another way to get to the normal tab if your in full screen
make the curser go right up to the top of the screen and it will show the apple tab
it will have two arrows facing together highlited in blue
if u tap that it will take you to the normal tab -
after i erased whole data from the ipod touch 3rd gen. when i put back to sync it. it says in the windows connect to itunes, which i did,i also installed new itunes but still it doesnt recognise . pls help me if u have gone thru same trouble like me
ThanksI do not understand what "it says in the windows connect to itunes" means?
What is "it" and what is "windows"?
Maybe:
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Windows 8 error "product key does not match any of the Windows images available for installation"
Hi Experts
My HP Pavilion laptop came with window 8. I made the USB recovery for windows 8 using hp recovery manager. My windows was corrupted, while I was trying to install windows 7 in dual boot.
I used above USB recovery to restore factory default. But every time it is giving me error "HP Recovery Manager Failed error code = 0xefffff08"
Then I downloaded the OEM ISO mage for windows 8 and tried to do the clean install but now installation process is giving me error "The product key entered does not match any of the Windows images available for installation. Enter a different product key"
Please help me. To whom I have to contact?Hi ghost-rider,
Thank you for your query, I will do my best to assist you.
I understand you tried to do a recovery and you received this error "oxefffff08".
First I would suggest you run a hardware diagnostics. Testing for Hardware Failures (Windows 8)
If no hardware failures are located, you have ruled that possibility out.
Here is a link to Troubleshooting HP System Recovery Problems (Windows 8) that may help.
If you are still having an issue doing a recovery, I suggest contacting HP support and explain the issue you are having with doing a recovery. They may have another option available for you.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap
The clean install from an OEM image is looking for the product code as it does not match the one that came with the computer, You would need a new code.
I hope this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
how do you manage to install windows 7 when the message on the screen is "The product key entered does not match any of the Windows images available for installation. Enter a different product key. "
That's a really helpful answer and not smug at all, thanks Carey.
I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011 -
"To import all songs on the CD, click Yes in the window that appears. iTunes starts importing the CD."
I am using a Dell and can't import the CD I need because the window doesn't automatically pop up. How do I fix this? Any thoughts?You could try my script ConvertFormat and see if you like the results. Would be easier than inserting the CDs and correcting the tag info again. Just be aware this is a one-way trip. Once you've thrown away some quality to shrink the files you can't get it back without going back to the source. You may better off investing in a bigger drive.
If you just want to squeeze more on the iPod you can use the built-in iTunes option to convert files to a lower bitrate as they are added to the device.
tt2 -
Why does the window freeze sometimes, and why can't I log on to my e-mail?
When I get my window and click on to Firefox, the comcastwidow opens. I then want to go to my e-mail. I click several times and nothing happens. Then I try to close the window, thinking I will start over, but the window freezes. There is no reaction to my clicking to close. Everything is frozen.
Well it works for me, am using the Firefox browser, there are issue with IE at the moment.
Did you read this thread http://community.bt.com/t5/Other-BB-Queries/Email-problem/m-p/1089742#M71322
Have you tried restarting the home hub?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
When i upgraded to itunes 10.4 the install freezes during intallation
This first happened when i was prompted to upgrade to the newest version of itunes, when following the promts on screen the install of itunes freezes.There is no error code or warning comes up on my screen, it just freezes during the installation. it happenes after quicktime has been installed. i tried removing all itunes and associated programs and downloaded the latest version and tried installing again but it freezes every time.
any ideas on what the problem could be?Just tried install again but it freezed at the same point after 'copying new files' the status bar gets to around 95% and stops.
-
Windows freezing during boot,after vga drivers installation
System freezes during the boot process,as soon as i install nvidia drivers.i ve tried eliminating the problem with several ways,but nothing seems to solve it.different windows version,different drivers version,different cpus,different memories,nothing attached on the board except the hdd and ram,different psu,manually installing drivers,stopping nvidia services,different vgas(9600gt,9800gt,gts240/250)although it works with pov 9300gs or 8600gt 512.additionally,system boots up normally in safe mode.is there anything you can possibly propose?
thanks in advance.
cpu:intel c2d e8500
m/b:msi p43t-c51 ms7519 latest bios
memory:2x kingston 2gb 6400
psu:premier 450w
vga:point of view 9800gt 512 green edition
os:windows xp pro 32bit
hdd:500gb hitachi
pci:serial port oem cardguys i have the exact same problem it has nothing to do with psu i have a coolermaster 800W and a msi9800gt vga this m/b has compatibility issues with nvidia graphics drivers and some nvidia vgas. I have two of them. Both have the same problem get an AMD graphic card. Trust me i know what i'm talking about. I tried every possible solution out there nothing worked. I emailed msi technical support they just send me latest bios and latest drivers nothing. I tried to update vga bios nothing. I tried tree different psu all from different vendors guess what nothing. I changed my memory modules nothing. I changed cpu nothing. I tried every bios available nothing.
-
System optimization freezes during Itunes 7.6 upgrading
Hi, the last step (system optimization) freezes during the Itunes/Quicktime/Imovie upgrading.
What can I do ? Thanks for any advise.+Now I get bluescreen every time I try to open or configure Quicktime or even I if my Quicktime-Plugin for IE or Firefox starts...+
What numerical and text codes are you getting with it? (ie 0x\[zeros/letters/numbers] CAPSANDUNDERSCORES)
If the blue screen mentions a specific file (such as, for example ati3duag.dll), let us know what that is called too. (Exact spelling, please.)
Here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
If you're just seeing a "flash" of a blue screen, we can use this technique to make hidden blue screens appear for us:
1) Open your system control panel (On Vista, go "Start > Control Panels", click "Classic View", click "System").
2) Click "Advanced System settings".
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked. -
13" Macbook is freezing during re-installation.
Need of a little help here. My book is freezing on the second disk during installation. I am am re-installing due an issue on boot up trying to read the file System\Library\Caches\com.apple.kext.caches\Startup\Extensions.mkext. I get a Read error0x7. The disk utility from the start up reports that the disk appears to be healthy and all permsions are correct. Any one have any ideas what could be goign on? Can anyone tell me of any diagnostics I can run during the installation to see where the hang is?
The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Windows freezes during setup - help!!
I am trying to install Windows and have had nothing but problems. I am able to make a 32 gig partition and then Windows takes over. Windows will then install the drivers during the Windows setup stage but when I get to "Setup is starting Windows", the DVD drive stops and installation is halted. I have unplugged the mouse and some of my USB external drives to no avail.
Does anyone have any other advice. My windows disc is an OEM version of XP Prommotil wrote:
I'm having the same issue trying to install a new out of the box copy of XP home.
It says "session3initializationfailed" I then have to reboot with the power button. It does it every time. The Windows is SP2.
Ditto for me. BootCamp fails to install XP Home SP2. I have a legal full version bought from Best Buy. Partition is created fine, but get this error when Windows is being loaded: SESSION3INITIALIZATIONFAILED.
I have no clue what to do, other than purchase Vista Home Edition and give it a go. -
Object Referenced Error When calling the Windows Form during Runtime
Hi,
I am getting Object reference errors when running windows form during runtime. In debugging mode in MS Visual studio 2005, I am not getting this error. I'm calling the window form from menu and called the window in a thread as suggested in one of forums . I don't see anyone in the forum mentioned this problem I have. Any help would be deeply appreciated. Below are the error and code samples.
ERROR Message
Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Project1.Loadxml.Loadxml_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Edited by: Albert Tio on Feb 16, 2011 9:55 AMHere is the code.
Option Strict Off
Option Explicit On
Friend Class GetEvents
Public WithEvents SBO_Application As SAPbouiCOM.Application
Public SboGuiApi As SAPbouiCOM.SboGuiApi
Public oForm As SAPbouiCOM.Form
Public oDBDataSource As SAPbouiCOM.DBDataSource
Public oCompany As SAPbobsCOM.Company
Public RS As SAPbobsCOM.Recordset
Public oPrev_Bank As String, oPrev_AcctType As String
Public oLoadXml As Loadxml
Public Sub SetApplication()
'Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
SboGuiApi = New SAPbouiCOM.SboGuiApi
' by following the steps specified above, the following
' statment should be suficient for either development or run mode
sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
' connect to a running SBO Application
SboGuiApi.Connect(sConnectionString)
' get an initialized application object
SBO_Application = SboGuiApi.GetApplication()
End Sub
Public Sub SetCompany()
Dim ret As Long
Dim MsgStr As String
Dim Cookie As String
Dim ConnStr As String
Try
oCompany = New SAPbobsCOM.Company
Cookie = oCompany.GetContextCookie
ConnStr = SBO_Application.Company.GetConnectionContext(Cookie)
'//before setting the SBO login context make sure the company is not connected
If oCompany.Connected = True Then
oCompany.Disconnect()
End If
ret = oCompany.SetSboLoginContext(ConnStr)
If Not ret = 0 Then
Exit Sub
End If
ret = oCompany.Connect
Catch ex As Exception
SBO_Application.MessageBox(ex.Message)
End Try
MsgStr = ""
If Not ret = 0 Then
oCompany.GetLastError(ret, MsgStr)
SBO_Application.MessageBox(MsgStr)
Else
End If
End Sub
Public Sub New()
MyBase.New()
' set SBO_Application with an initialized application object
SetApplication()
SetCompany()
AddMenuItems()
End Sub
Private Sub SBO_Application_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.MenuEvent
Dim myThread As New System.Threading.Thread(New System.Threading.ThreadStart(AddressOf LoadXmlMainThread))
Try
If (pVal.MenuUID = "MySubMenu") And (pVal.BeforeAction = False) Then
'SBO_Application.MessageBox("My sub menu item was clicked")
'// Create a form to be launched in response to a click on the
'// new sub menu item
myThread.SetApartmentState(System.Threading.ApartmentState.STA)
myThread.Start()
'Loadxml.ShowDialog()
End If
Catch ex As Exception
SBO_Application.MessageBox("1." & ex.Message)
End Try
'If (pVal.MenuUID = "MyGoToMenu") And (pVal.BeforeAction = False) Then
' SBO_Application.MessageBox("My GoTo Menu was clicked")
'End If
'If (pVal.MenuUID = "MySecondGoToMenu") And (pVal.BeforeAction = False) Then
' SBO_Application.MessageBox("My Second GoTo Menu was clicked")
'End If
End Sub
Private Sub LoadXmlMainThread()
'Dim lLoadxml As New Loadxml
Try
oLoadXml = New Loadxml
oLoadXml.WindowState = FormWindowState.Maximized
oLoadXml.ShowInTaskbar = True
oLoadXml.TopMost = True
oLoadXml.Activate()
Application.Run(oLoadXml)
Catch ex As Exception
SBO_Application.MessageBox("2." & ex.Message)
End Try
End Sub
Private Sub AddMenuItems()
'// Let's add a separator, a pop-up menu item and a string menu item
Dim oMenus As SAPbouiCOM.Menus
Dim oMenuItem As SAPbouiCOM.MenuItem
Dim i As Integer '// to be used as counter
Dim lAddAfter As Integer
Dim sXML As String
'// Get the menus collection from the application
oMenus = SBO_Application.Menus
'Save an XML file containing the menus...
'sXML = SBO_Application.Menus.GetAsXML
'Dim xmlD As System.Xml.XmlDocument
'xmlD = New System.Xml.XmlDocument
'xmlD.LoadXml(sXML)
'xmlD.Save("c:
mnu.xml")
Dim oCreationPackage As SAPbouiCOM.MenuCreationParams
oCreationPackage = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_MenuCreationParams)
oMenuItem = SBO_Application.Menus.Item("43520") 'moudles'
Dim sPath As String
sPath = Application.StartupPath
'sPath = sPath.Remove(sPath.Length - 3, 3)
If sPath.EndsWith("\") = False Then
sPath = sPath & "\"
End If
'// find the place in wich you want to add your menu item
'// in this example I chose to add my menu item under
'// SAP Business One.
oCreationPackage.Type = SAPbouiCOM.BoMenuType.mt_POPUP
oCreationPackage.UniqueID = "MyMenu01"
oCreationPackage.String = "Unbridle Menu"
oCreationPackage.Enabled = True
oCreationPackage.Image = sPath & "unbridle.bmp"
oCreationPackage.Position = 15
oMenus = oMenuItem.SubMenus
Try ' If the manu already exists this code will fail
oMenus.AddEx(oCreationPackage)
'// Get the menu collection of the newly added pop-up item
oMenuItem = SBO_Application.Menus.Item("MyMenu01")
oMenus = oMenuItem.SubMenus
'// Create s sub menu
oCreationPackage.Type = SAPbouiCOM.BoMenuType.mt_STRING
oCreationPackage.UniqueID = "MySubMenu"
oCreationPackage.String = "Unbridle Monitoring"
oMenus.AddEx(oCreationPackage)
Catch er As Exception ' Menu already exists
'SBO_Application.MessageBox("Menu Already Exists")
End Try
End Sub
End Class
Public Class Loadxml
'Inherits System.Windows.Forms.Form
Public sBPpath As String
Public sGLpath As String
Public sBillpath As String
Public bRun As Boolean
Private Sub Loadxml_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.TextGL.Text = System.Configuration.ConfigurationSettings.AppSettings("GLAcctDownloadPath").ToString()
Me.TextBP.Text = System.Configuration.ConfigurationSettings.AppSettings("BPAcctUPloadPath").ToString()
Me.TextBill.Text = System.Configuration.ConfigurationSettings.AppSettings("BillUPloadPath").ToString()
Me.NotifyIcon1.Visible = False
End Sub
End Class -
TS3212 "invalid drive :/E "error? during itunes installation..
I have the following error during updating itunes..
Is there a way around it?
Regards,
NicolaasLet's try the following user tip with that one:
"Invalid drive X:\" install errors
Maybe you are looking for
-
After upgrading to Yosemite, iphoto has a white symbol across it indicating it needs to be upgraded. When at the app store the install option is not available?
-
Why is it so hard for ATT to upgrade my DSL????
I have been in contact with their representatives on here to see if I can get things resolved that way. I would upgrade to UVerse if it was available here. It is not. Not sure why; there are more rural areas near here that have it, but not in my sub
-
Can't create panel shortcuts in InD CS6?
Hi all, I recently installed InDesign 6 on my laptop, which is running Windows 8. I'm currently working on a file, and when I go to the F11 panel to create a new style it won't let me create a shortcut for the style. I've tried ctrl+ and num+ and all
-
Converting dvd footage into Premiere
Hi everyone, I have a question and I really need helpp with this. I have the CS6 Mater Suite and I want to use dvd footage from films for use in doing film reviews. I know the tools are here somewhere, but I need help with ow to transfer the dvd to b
-
I've been trying to format my SD Card but the "erase" function is grayed and not usable. Is there another way to format an SD Card on Mountain Lion? Thanks in advance.