THE wireless connection breaked

THE wireless connection breaked on Every two Horus!

Some folks have discovered that changing their DNS service fixes connection issues.
The ideal way is to configure your modem/router with DNS service, but often settings in System Preferences/Network on your Mac will override the router settings. Try either or both of these;
OpenDNS
208.67.222.222, 208.67.220.220
Google Public DNS
8.8.8.8. 8.8.4.4

Similar Messages

  • After downloading Yosemite, my HP Photosmart D110 printer will no longer work. The wireless connection is fine but says it cannot find my printer when trying to print.

    After downloading Yosemite my printer, a HP Photosmart D100 will no longer print. The wireless connection is fine, and a test page printed perfectly directly from my printer. When trying to print from my computer, it says it cannot connect or find the printer. I tried downloading the most updated software from HP website but it doesn't appear to be helping.

    Try resetting the printing system.
    OS X Mavericks: Reset the printing system
    If you have the printers IP address open Terminal (applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
    Network Printer Troubleshooting
    HP – Wireless Printing Center
    HP – Printer Not Found During Wireless Installation

  • Satellite A660-13T - I can't go from 65 Mbps with the wireless connection.

    +Sorry for my English, is not my native language.+
    Hi,
    I expose my problem:
    I can't go from 65 Mbps with the wireless connection. I can't move from that connection speed.
    Laptop configuration:
    * Windows 7 Ultimate 64 bits (with all updates installed).
    * All drivers updated properly.
    * With the latest version of BIOS.
    Router:
    * Tp-link TL-WR1043ND, installed 3 meters above the laptop (without obstacles).
    Configuration of router:
    * WPA2-PSK AES.
    * 802.11n
    * Maximum output power.
    * Channel: 11 (not automatic, this channel is relatively free).
    * Channel width: 40 Mhz.
    * Maximum tx rate: 300 Mbps.
    Other information:
    * The wireless card drivers are correctly then updated (ver. 5.60.48.35).
    * The router has updated firmware.
    * I have tried all settings of the wireless card.
    * Bluetooth off (without interferences).
    * {color:#ff0000}There are other computers on the network that connects 150 and 300 Mbps (with the same network configuration).{color}
    Thanks in advance,
    Greetings.
    Message was edited by: Xibalba

    Hi buddy,
    > I kept O.S. original for a week and the problem was the same
    If you had the same problem with factory settings you should test another router. Maybe its a malfunction of router or something else (not compatible to your WLAN card).
    Furthermore ask the manufacture of your router if they know something about this.
    In worst case its a hardware malfunction of your notebook. You should contact nearest service centre. I believe they can fix it under warranty, because A660 is pretty new notebook.
    Good luck! :)

  • Re: Satellite L350-262 - The wireless connection adaptor is disabled

    Basically my laptop is a couple of weeks old, it was working fine wirelessly until suddenly one day it stopped, it nows says The wireless connection adaptor is disabled, how can I resolve this? any suggestions?
    Thanks

    Can you please provide more details?
    Can you see the WLan card in device manager?
    Are there any yellow exclamation marks?
    Does the other FN buttons work properly?
    Is your BIOS up to date? Did you set it to default settings?
    If not do this!
    Last solution; try system recovery. This will set the notebook back to factory settings.

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • I have a MacBook Air, which I just upgraded to OSX Lion. I also have the latest version of iTunes. When I try to stream to the AirPort, the Airport resets, and the wireless connection on the macbook locks up. Any suggestions where to start?

    I have a MacBook Air, which I just upgraded to OSX Lion. I also have the latest version of iTunes. When I try to stream to the AirPort, the Airport resets, and the wireless connection on the macbook locks up. Any suggestions where to start?

    To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
    Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit.

  • How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

    How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

    Plug in ethernet .. in the computer.. turn off wireless.

  • Airport keeps dropping the wireless connection to my network 2 or 3 times a day.

    Hi,
    Since apple's recent firmware update for my macbook pro, airport keeps dropping the wireless connection to my network 2 or 3 times a day. It then searches for a network but can't find it, but if I select my network manually it connects immediately ???
    Any fixes for this ..... in layman's language please!
    Thanks,
    Steve

    It is not the router. There are a number of factors that are involved. If the router is a G/N router you may have to switch to G-Only (or disable N). You may also have a 5 GHz wireless phone or other routers in the neighborhood interfereing with the signal.
    Try this:
    1. Open network preferences. Take note of what IP address is assigned. Then, click Advanced.
    2. Click on TCP/IP and select Using DHCP with manual address and type the IP address below that.
    3. Click OK.
    4. Set your Router to Wireless-G only (or disable N) and change the channel to 11 or some higher number.
    This should keep it from dropping the wireless connection. It is a bug in the OS. Apple has not fixed it in 3 years.
    You wireless connection will be a tad slower, but you really won't notice.
    Hope that helps.
    DB

  • Want stream Netflix to blueray via Airport Express wifi. The blueray finds my wifi but the wireless connection failed - said, Ensure DHCP server is enabled on router and restart router. Don't think I have DHCP server. Suggestions anyone?

    Want to stream Netflix to blueray player via my existing Airport Express wifi. The player finds my wifi but the wireless connection fails - says, " Ensure DHCP server is enabled on router and restart router." I don't think I have a DHCP server. Suggestions anyone?

    I can't speak specifically regarding LG, but the Whole Home feature on Direct TV (record a movie on one DVR and watch it on another TV in another location) just won't work with wireless, and I have a strong fast connection at 300 Mbps. Ethernet works perfectly.
    Few audio/video products will accept "n" wireless at 5 GHz. I suspect that your LG accepts a 2.4 GHz signal, which would top out at 130 Mpbs.
    If you are trying to stream High Definition video, especially at 1080P, my opinion would be that it is unlikely that you will be able to do so reliably using wireless.
    Perhaps another user who has figured out how to do this will post with some input.

  • Wireless connection breaks

    When I am connected for a long time to my wireless broadband thru the IPAD mini, at times I am not able to log in to new pages. This is inspite of the fact that the wireless connection icon is  visible on the top. To solve this I have to go to settings,disable the wireless and then again join the wireless. After this the page opens. Why is this happening? This is inspite of the fact that my IPAD is continously well iwithin  the wireless range

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Restarting the computer and re-establishing the wireless connection

    I am a wireless newbie. I just got a g router  and established a secure wireless connection. When I restart the computer it seems like I have to reestablish the wireless connection with a wired connection before it will log me in to my wireless connection. Is this what happens? Also, now when I try to "view available wireless conncections" it has my SSID but since it's secured I need a password of some kind to access it. I don't recall signing up for a password so I don't know it. any help would be greatly appreciated.

    Hi…I would suggest you to login in the router setup page from your wired computer, through internet explorer by typing in 192.168.1.1 in address bar > skip username and > enter admin as password. Click Wireless Tab > second sub Tab Wireless security, you will find your wireless network key or wireless password that you need to enter on our wireless computer while connecting to your wireless network. Once you get connected to your wireless network it will not ask you to enter your wireless security code or password even if you restart your computer.

  • Cannot get the wireless connection to work on mx459

    I have tried for hours to set up the wireless connection.  I even did the usb connect method.  I enter the ip manually and it won't detect it....just keeps me looping to the detect ip automatically or use the network connections it detects.   I tried the wps button on the router, printer doesn't find it.  I can detect my network thru the lan settings on the printer, but my other computer just doesn't pick it up.   Have tried everything suggested and that i could come up with, but im out of ideas at this point....any suggestions?

    Sorry, i am trying to connect to it from an acer desktop running windows 8.  athlon II x2 215 dual core processor.  the router is a westell wireless router.   

  • After i have update my iphone 4s to 7.0.4 the wireless connection and blutooth dosnt work

    after i have update my iphone 4s to 7.0.4 the wireless connection and blutooth dosnt work

    i cant turn wifi  on

  • I recently upgraded my internet service with Comcast for faster internet.  When I user ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed.  I have an airport extreme...3-4 years old.  Why?

    I recently upgraded my internet service with Comcast for faster internet.  When I use an ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed.  I have an airport extreme...3-4 years old.  Why is the speed so different and are there settings I can change to increase the wireless speed?

    If your supposed to be getting 20 Mb/s down via your ISP and both Mac's are not getting that on the SpeedTest, then obviously your router appears to be the cause.
    Connect one Mac directly to the ISP's modem, power off/wait 30 seconds/then power on, then power on the Mac. The ISP will connect directly to the Mac, then run a SpeedTest.
    Then repeat the same for the other Mac. If both Mac's have a problem then it's possibly the ISP, the modem, your lines to them or on your property, or both Mac's are messed up.
    You'll have to keep searching for the cause. Call your ISP and ask then to run a test to see if your getting your 20 Mb/s to your modem, that should clear part of the problem.
    Diagnosing network issues

  • The eFax firmwear Update Messed Up the Wireless Connection

    I followed the directions to reconnect eFax on my HP Photosmart 7510, installing the firmwear update. Unfortunately the update disconnected the printer from the wireless connection and I was unable to reconnect it.
    I contacted HP support by phone at approximately 5:45 p.m. The first person I talked to was able to get the wireless working again by taking over my computer and reinstalling the softwear. Unfortunately, the softwear he installed does not resolve the eFax problem. So I was back to square one. He transfered my call to a different support rep who after considerable time was not able to get eFax to work. She "escalated" my case and I am supposed to hear back from HP in seven working days. I just got off the phone with HP support at 8:30 p.m. Not bad three hours of support and I still don't have a working eFax.

    Hi @josborne3,  
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details. If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/How-to-check-your-messages/t...
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Maybe you are looking for