The Wireless Network tile is not displayed in Windows Mobility Center

In my Vista X64 Enterprise that besides this behavior runs perfect i lose the The Wireless Network tile, Microsoft has even a KB about this see http://support.microsoft.com/kb/934555
+The Wireless Network tile is not displayed in Windows Mobility Center on mobile PC that is running Windows Vista+
Point is that i have the latest drivers (from Windows Update) on my MBP for my AR5008X and i installed the lastest bootcamp update (2.1) On a Fresh Vista installation the tile works for a day and then it's gone, it shouldn't disappear.
How can i recover this tile, i turn of wireless often so i need this option!!?
Message was edited by: piojo

Nobody has the issue that when press Windows X (to get the mobility center) finding that the Wireless TILE is missing?

Similar Messages

TS1559 Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.

Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.

I had the same problem. I did the reset networks on my iPhone & it did not work. My husband read somewhere that changing the channel on the router to manual & selecting the highest available channel number might help. I did that & it solved the problem. I have not had the problem since.

My deskjet 3050 says it is connected to the wireless network but will not print unless wirelessly

my deskjet 3050 all in one j610 printer will not print wirelessly even tho it says it is connected to the network.
It will only print when connected by usb cable.

Download and run this utility:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

I don't mean to be facetious but sometimes the simplest things are overlooked. To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open. It also needs to be on the same network. My network is dual band and works with either stream but a friend of mine does not. He has to set the computer and the Apple TV to the same band. Hope this helps.

TS1398 My wireless password in only 6 lowercase letters, but my iPod touch requires me to enter 8 before allowing me to join. Therefore it will not let me log on to the wireless network, any solutions?

My wireless password in only 6 lowercase letters, but my iPod touch requires me to enter 8 before allowing me to join. Therefore it will not let me log on to the wireless network, any solutions?

What encryption are you using on the router?
If WEP you have to set the router to use the first key and you have to enter the first key as the password on the iPod. See:
iOS: Recommended settings for Wi-Fi routers and access points

I have an ipad first generation. I am trying to connect to a linksys router and it is not finding the wireless network. what do i need to do?

I have an ipad first generation. I am trying to connect to a linksys router and the ipad is not finding the wireless network. What do I need to do? Thanks for your help.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Since I've upgraded to Maverick the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

I have over 250G backed up and I really don't want to reset everything and start again.
Not sure what you mean here.
A reset will not affect any of the data on the Time Capsule hard drive. You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
Another user may be able to offer more input on Mavericks.

Hp photosmart not connecting to the wireless network

Hi,
I see that there are many questions on this theme that I have read.
i am still confused and have tried many of the solutions as I am unable to connect my printer to a wireless network and therefore not connect it with my mac running the latest os.
I am not the most tech savvy but can folllow instructions easily.
I have printed the network configuration page and it shows the network of the printer is offline. how do i get it to connect?
I have tried the push button method.
the printer is connected to a windows 7 computer that isnt wireless could this be the problem.
please help me i have been at this for 3 hours so far.
thank u

Hello @Ali1234,
Welcome to the HP Support Forums! I understand you are trying to connect your HP Photosmart C4780 to your Mac running the Yosemite 10.10 Operating system. I notice you have the PS C4780 connected to a Windows 7 computer, what you would need to do is connect using the USB to Wireless option. Let's put the Mac on hold for a minute and get on the Windows computer, follow the steps below:
The HP software automatically gathers network settings by temporarily connecting a USB cable from the printer to a computer that is connected to the new network. Follow these steps to reconnect the printer to the network.
Click the Windows icon (), click All Programs, click HP, and then click the folder for your HP printer.
Click USB to Wireless, and then follow the on-screen instructions. Do not connect the printer to the computer with the USB cable until prompted. At the end of the process you are prompted to remove the USB cable.
Restart any other computers on the network that use the wireless printer.
- Source
Once you have the PS C4780 connected to your wireless network, let's go ahead and work with the Mac. Because you are using the Yosemite 10.10 Operating system you must install the printer using the Apple Updates. Please click on the link below, this document explains how to install the print driver on a Mac for a USB or a network connection. The OS X v10.10 Yosemite driver for your printer is available through Apple Software Update (ASU). Additionally, you can perform basic print jobs using AirPrint without installing a driver.
Installing a Mac Printer Driver Using Apple Software Update
Be sure to check out the FAQs at the bottom of the document as some of the features may be limited or there are workarounds.
I hope this helps!
Thanks again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Have a 802.11n time capsule, the range of the wireless network has shrunk down to nothing over last few days. Used to be able to use wireless network anywhere in house, but now can only use in my office. Will not connect to iphones, ipad, itouch, or noteb

Have a 802.11n time capsule, the range of the wireless network has shrunk down to nothing over last few days. Used to be able to use wireless network anywhere in house, but now can only use in my office. Will not connect to iphones, ipad, itouch, or notebook. Worked fine last week, but over weekend just started having issues.

It is very possible that you may have some form of Wi-Fi interference that has appeared recently that is preventing your Time Capsule (TC) from providing a clean RF signal.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible. Look for other Wi-Fis that may be operating nearby. Note those with the strongest signals and which channels they are operating on ... then change the channel used by the TC to be at least 3-5 channels away.

My Epson XP - 400 will not print wirelessly or via USB. The documents just sits in the print queue while the computer is "searching for the printer". I set up the printer on the computer and it is connected to the wireless network.

I'm unable to print wirelessly or connected via USB with my Epson XP-400. The computer continues to say it's searching for the printer even though the printer is set up on the computer, the printer is connected to the wireless network and the USB is plugged into the computer.

Try resetting your Mac's printing system as shown here:
http://support.apple.com/kb/PH14141

How do I use a wired computer on the wireless network?

I want to hardwire my desktop to my wireless router. I have a wireless adapter and my computers work fine on the wireless network. If I try to plug in the ethernet cable to the router and disable the wireless adapter, it doesn't work. The light lights up on the front of the router saying that the ethernet cable is plugged in and the 1394 network connection is enabled in the "network connections." However, I cannot ping the router when using the ethernet. On the desktop computer, I look in "view workgroup computers" and there are no computers listed there. On the back of the computer, there is a light that lights up when I insert the cable, so I know the computer has detected there is a cable plugged in there.
They way I set up my wireless network is by using XP's tool under network tasks called "set up a wireless network for a home or small office" (which is found in "My Network Places." I don't know how to combine a wireless network with a wired network. Please help me.
I am using WRT54G. We don't have broadband installed yet.

Correct…I would not mess w/ the bios. Do you have an extra cat5 cable long enough to plug into the back of your router to the back of your PC? Hopefully, it was not taken out when the wireless NIC was installed. Do you see a place to plug in the cable on the back of your PC? It looks like a phone connection jack/ modem, only bigger. If not, what kind of machine, OS (Win 2K, Win XP, etc).

Need help here! I'm out of options. Computer can't see the wireless network

Sorry for the novel, but I have to tell you what is going on with my computer. I also need to vent because I’m extremely frustrated. I want to make sure I give as much info as I can we can get this fixed. I’m done with trying to figure this out on my own!!!
I’m having a major issue with the wireless network connection on my desktop. I’ve tried everything and I can’t figure out what it’s doing.
First of all, my wireless router is set up correctly (according to the Sticky), has active security, and works fine. It has nothing to do with the router. I’m sure of it.
Here’s a quick history:
When I was at my first residence in Chicago and bought a Linksys wireless N router in May 2008. My computer was about 30 feet away from the router and everything worked fine. Always found the router and never lost connection.
I moved to a new place in September 2008 and used the same router, computer, etc. at my new place. The computer was only about 7 feet away from the router this time, but I used the wireless connection instead so I wouldn’t have a network cable lying across the floor. At first everything worked fine. No issues. Then, one day out of the blue, my desktop lost connection with the router. My router didn’t even appear as an Available Wireless Network. I rebooted everything and that seemed to fix it. OK, issue fixed, right? Wrong. It did it again the next day. I rebooted everything, but it still couldn’t find my router. It did see lots of other wireless routers in the area though so I know the wireless card was working. It just didn’t see my router.
This went on for a while. Sometimes it would see my router and connect then it would lose it again. I thought maybe it was the router going bad. Well, I have a notebook computer too so I tried it. It has found my router every time and has never lost connection. I had it sitting on top of my desktop even to see if there was some sort of dead spot in my condo, but the notebook found my router just fine.
Sometimes my desktop would see my router, but it wouldn’t be my network name. It would call it “Home” or something. I know it was my network because it was the only network with maximum (Excellent) signal strength. I’m thinking it must be some sort of association issue. For some reason it doesn’t associate my router as an available network. I don’t understand that.
I tried everything: Ad Aware, Live OneCare, registry cleaners, driver updates, restore points, pretty much anything I found in the forums. Nothing worked for long if at all. It’s like my desktop only finds my router when it wants to. Note: The only thing that would work sometimes was if I clicked “Repair.” Sometimes that would work. I finally gave up and connected my desktop via network cable and unhooked my wireless card. I never lost connection as long as it was hard-wired.
The drama continues. I recently moved to Iowa and set up my network here. I’m using the same router, same desktop and wireless card, same notebook computer, etc. I went ahead and tried the wireless card on my desktop again. It worked just fine! No connection issues at all. It connected and stayed connected. I thought, “Well, that’s strange. It must have been something with the condo in Chicago. Oh well!” It worked fine from February 5 until March 10. Now it’s doing it again!!!! The notebook is about 3 feet away and sees the router just fine.
Here are the facts:
I’m using a Linksys WRT300N Wireless-N router.
I’m using a Linksys Wireless-N PCI WMP300N Adapter (about 18 months old).
I’m running Windows XP on the custom built desktop and Windows Vista on the HP notebook.
I built this computer about 5 years ago and have not done any major upgrades for 2-3 years. The only thing I added was the wireless card. I also changed out the HD in January 2009 and did a data migration right before I moved to Iowa in February. All of the networking issues were going on well before I did the data migration though so it has nothing to do with that. In fact, I had my computer hard-wired into my router at the time of the data migration and the wireless worked fine (for a little while) after I moved to Iowa. So if anything, the data migration seemed to help with my wireless connection.
All drivers are up to date.
Using Windows Live OneCare and have run complete scan: nothing found.
Using Ad Aware and have run complete scan: only found cookies and deleted them but didn’t fix issue.
Ran WinsockxpFix but that didn’t help.
Ran TweakNow RegCleaner Standard but that didn’t help.
Right-clicking the wireless icon, I try to view Available Wireless Networks. The window comes up and shows me other wireless networks in the area (2 available right now), but doesn’t show my network at all. I click “Refresh network list” and 1 or 2 of the other networks will come up, but mine is still not shown.
I’ve clicked “Repair” and get this message: “Windows could not finish repairing the problem because the following action cannot be completed: Connecting to the wireless network.”
If I go to Control Panel, there is a Wireless Configuration Utility program from Broadcom. When I open that here is what I find:
It is not managing my wireless networks.
Under the “Wireless Networks” tab I see my Network with an “X” over the router icon to the left of it and a locked security icon to the right of it.
No information under the “Link Status” or “Statistics” tabs.
The “Site Monitor” tab shows my wireless network and the other 2 networks in the area (although they drop in and out because of signal strength). My network is always present even though the signal strength bounces up and down. This tab shows that my network is secure, 802.11 is g and n, speed is 270 mbps, Channel is 9, and Signal bounces from orange/red to green. Data encryption is (m)TKIP, TKIP, WPA-PSK.
I was going to use my notebook to post this message since it has been connected for 2 days without ever losing connection. It shows Very Good signal strength and is about 3 feet away from my desktop.
Update: My desktop just connected to my network after sitting there for 2 hours. Good to Very Good signal. Broadcom tool shows the connection and now has information in the Link Status and Statistics tabs.
Cancel that. It just lost connection again. It was only connected for about 5 minutes. There is no change in signal strength according to Broadcom though. In fact, Broadcom shows better signal now that I lost connection.
Now, it just connected again (on its own) after sitting there for 10 minutes! I’ve been surfing the web on my desktop for 45 minutes now and I’m using my desktop to post this message. What the heck?!!! This is what it’s like. Aggravating huh?
Well, that’s all I can think to write. What else do you need? Can anybody help me with this?
I’m confused. Please help!
Thanks a lot!!!
Jake
Message Edited by JakeT on 03-12-2009 02:54 PM

Thanks but it's just my desktop that doesn't see it though. My notebook sees it everytime, even at the same exact time that my desktop doesn't see it. For example yesterday when I was typing up this post, I was typing up the post on my notebook because my desktop didn't see the router. I don't think it has anything to do with the router actually, but I wanted to see if anyone on here has encountered this issue before. Other forums have similar issues but I've tried all of the fixes I found elsewhere and they didn't work.
Any other ideas?
Thanks!

Re: [iPlanet-JATO] JATO 1.1 - First Tile is not displayed in TiledView.

Hi Shyam--
I'm not seeing this over here. So, we need to figure out why you're seeing
it--I need some more information.
First, what model are you using to back the tiled view? Second, can you
please forward the page and tiled view Java classes and JSPs to my work
address? At what point are you writing the getTileIndex() value out--during
display, business processing, what?
Also, try putting a stack trace in the nextTile() method of the tiled view
to see if its being incremented from somewhere you don't expect:
public boolean nextTile()
if (getTileIndex()==0)
new Exception().printStackTrace();
Todd
Todd Fast
Senior Engineer
Sun/Netscape Alliance
todd.fast@e...
----- Original Message -----
From: <shyam_gotur@p...>
Sent: Saturday, March 03, 2001 2:40 PM
Subject: [iPlanet-JATO] JATO 1.1 - First Tile is not displayed in TiledView.
Hi
We migrated our application from JATO 1.0 to JATO 1.1,
with 1.1 the nextTile() method is skipping the first tile in
tiledView.when printed the getTileIndex() to console , it is starting
with index 1 instead of 0.
Thanks
Shyam
[email protected]

Hi Shyam--
I'm not seeing this over here. So, we need to figure out why you're seeing
it--I need some more information.
First, what model are you using to back the tiled view? Second, can you
please forward the page and tiled view Java classes and JSPs to my work
address? At what point are you writing the getTileIndex() value out--during
display, business processing, what?
Also, try putting a stack trace in the nextTile() method of the tiled view
to see if its being incremented from somewhere you don't expect:
public boolean nextTile()
if (getTileIndex()==0)
new Exception().printStackTrace();
Todd
Todd Fast
Senior Engineer
Sun/Netscape Alliance
todd.fast@e...
----- Original Message -----
From: <shyam_gotur@p...>
Sent: Saturday, March 03, 2001 2:40 PM
Subject: [iPlanet-JATO] JATO 1.1 - First Tile is not displayed in TiledView.
Hi
We migrated our application from JATO 1.0 to JATO 1.1,
with 1.1 the nextTile() method is skipping the first tile in
tiledView.when printed the getTileIndex() to console , it is starting
with index 1 instead of 0.
Thanks
Shyam
[email protected]

Disable the wireless network card upon connection.

Has anyone done the following, if so can you provide some insite on how to do it and how well it works....If wireless networking is not being used in the organization, it is possible for CSA to disable
the wireless network card when it is connected to the corporate network. I'm assuming by using the system
state variable with the rule, you can allow laptop users the ability to use wireless when they are
not connected to the corporate network.

I dont' see a system state "ethernet active" do I create this? I'm on CSA version 5.1.0.103. I have a system state called network which has the description of All users who are logged on via a network connection. Is that the same thing you mean? Then how do I create the rule? I get to where I have a NAC rule but I'm not for sure what to choose after that.

This AirPort base station was unable to extend the wireless network.

I have an AirPort Extreme in the lounge connected to BT infinity.
I also have an airport express in the kitchen connected to a stereo system.
I have had this set up for around 12 months.
The airport express will not extend the wireless network.
I reset it, restart, factory reset etc and it will work fine for around 3 days, then I get the same error message saying
This AirPort base station was unable to extend the wireless network. Make sure the wireless network you’re trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network.
The express is situated easily within range of the extreme. And the airplay between those two, my iMac and two apple tv's works pretty much as it should.
Can someone please shed some light on this?
Maybe I have it in a wrong setting or summut....

G Beach wrote:
I am also experiencing a recent failure in my Airport devices no longer extending my wireless network.
My Aiport Express and second Airport Extreme were extending my wireless network for more than a year
The only change that has taken place lately is that the firmware for both devices was upgraded to 7.6.4, however the upgrade was only in response to trying to resolve this problem. Needless to say, the firmware upgrade did not resolve anything.
If I didn't know better, I'd have thought I wrote the above.
I have a TC from a few years ago (last one before the tower, I think), plus the older AEBS that it replaced extending the network, plus a 1-year-old Express also extending. I had upgraded them all to 7.6.3/4 when it came out, but reverted them all to 7.6.1 when everything went crapways (others having the same issues of the LAN regularly croaking), and didn't bother upgrading again since.
Today I just tried 7.6.4 on all of them, and it seemed OK at first with green lights all around in Airport Utility. Then I made one change, which was to enable 5Ghz on the main AEBS/TC only (the express doesn't need it, and the older AEBS can't do it).
The latter two started flasing amber and giving the "unable to extend wireless network" error message.
So I'm wondering if you are similarly using 5Ghz?

The Wireless Network tile is not displayed in Windows Mobility Center

Similar Messages

Maybe you are looking for