The wonderful world of Batch Loading - what's going on?
Hi,
I'm having an issue with the batch loader. When I load a file using batch loader and the the same file manually executing the workflow I get two different datasets at the import stage. I have a single import script and it seems that it doesn't execute properley when the file is loaded via the batch loader but does when I perform a manual import. I can't think of any logical reason for this. The script is getting executed but only partially when the batch load is run. I make use of a FDM temporary variable in the script RES.PvarTemp1, and this is the only thing I can think of that may be failing. Do these work when the batch load is run? Has anyone else experienced similar problems with the batch loader and import script execution?
Any ideas are very welcome :-)
FDM version 11.1.1.3 by the way
Edited by: SH on Mar 5, 2012 10:54 AM
Is the iPhoto icon showing crossed out? Like this?
When you shot down your Mac, it may have installed a system update, that had been downloaded automatically.
Which version of MacOS X are you currently running? The newest MacOS X version 10.10.2 requires iPhoto 9.6.
Try to download and install the newest iPhoto version from the App Store "Featured" page.
Similar Messages
-
When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?
Anna...
Could be the graphics card.
Run the Apple Hardware Test -
When I plug the battery cord in to my mac pro, it says it is charging, but no light comes on and the charge is still low. What's going on?
Good grief! I had not plugged the USB jack all the way into the headphone port on the iPod. Having taken that action, the iPod shuffle works great. My bad, as they say.
-
when trying to sync my iPhone i get a message saying : iTunes can't sync apps to iPhone because the apps installed on the phone could not be determine. what is going on?
I received the same error message after I had recently updated iTunes to 10.5.1 and I had wirelessly updated 13 apps. I had to go into iTunes and select Apps, on the bottom right it said I needed to update 13 apps. I updated the apps via iTunes and then synced again without an issue.
iPhone 4S / OSX 10.6.8 / iTunes 10.5.1 -
I'm an active subscriber for creative cloud photography plan. However, I can not connect with lightroom mobile. On my desktop app or on iPad app I get the message ˜trial expired˜. Please, what is going on? Thanks for the help.
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
The iTunes store will not load. what can I do?
The iTunes store will not load. What can I do?
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I purchased a Mac OS x 10.9 in December. When using Mac Mail i get thousands of incoming mails that do not show up on my computer. Does anyone have any idea what is going on? this sure never happened on my old mac. i have three email accounts. gmail, verizon and hotmail.
I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.
-
I have an iMac with OS X Lion 10.7.5,an iPhone 5s with iOS 7.1.2 and an iPad with iOS 7.1.2. all software is up to date. My problem is I do not receive all my e-mail on all 3 devices all the time. I seem to get them on my phone , but not all show up on my iMac or iPad. Any ideas as to what is going on and what can I do to resolve this issue? thanks
On the iPhone, go into Settings -> Store and turn off "Automatic Downloads" for Apps (and Music and Books, if you wish). You can also do that on the iPad to prevent it from going in the opposite direction.
That will stop any automatic downloading... to prevent them from coming over when using iTunes, select the phone (under Devices), Apps, and then uncheck "Automatically sync new apps." Again, do the same for the iPad if you wish. -
I can't understand why all of a sudden the display on my computer got all darkened, and I have to tilt the computer to barely see what I'm writing or the icons. I tried the brightening the screen but it didn't work so I'm concerned on what's going on....
-
The sleep/wake function would not show in general to turn it on. I have a Targus case but the function will not work? The place it should be their is. Auto lock, Password lock, and Restrictions
Keirosform wrote:
The sleep/wake function would not show in general to turn it on.
Ther is no "sleep/wake" setting in Settings > General.
Auto lock, Password lock, and Restrictions
Yes, these are the only three settings..
I have a Targus case but the function will not work?
What function? It won't go to sleep?
Press the Power button on top. Does it sleep? -
I upgraded my iphone4s to IOS7 and now my screen is locked with the Itunes logo and a graphic of a power connecter...What's going on...?
and how do I get my phone to function again...?http://support.apple.com/kb/HT1808
-
My Apple TV keeps turning off in the middle of set-up. What is going on?
I have been trying to set-up my Apple TV and everytime I get almost finished typing in my homeshare information the TV screen goes blank and the Apple TV wont restart for 10 or 15 minutes. What is going on?
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment. -
When I send an email message, my Mail shows two messages outgoing instead of just one.
What is going on? Is it possible some "spyware" has crept in?There is an email address on my website that automatically forwards to my "regular" email address, but this problem predates setting up that website. My primary email is a bellsouth account (AT&T) which switched to a Yahoo mail-supported service....so based on your comments, perhaps that is why the activity is looking weird.
-
My ipod says that I am connected to wifi, but the app store won't load, what do I do?
I just bought a brand new iPod touch yesterday, and I was trying to learn how to use it. I connected to my University's wifi, (and I know it works because my laptop is on it, and other friends have iPod touches who connect to it). I can connect to the wifi, but when I try to get onto the app. store or afari it says I am not connected. I need help what do I do? I have already restarted everything, and it did not work
You need to check to make sure you are actually connected to the network. Tap Settings > WiFi >and then tap the blue ">" next to the network name with checkmark. You should see a complete set of IP address but if the router didn't issue you an IP address properly, you will see your touch IP address start with 169.x. If this is the case, you are connected to the internal network but not to the web.
First thing to do (while you are on that screen) is tap "Forget Network". Then turn WiFi off. Turn it back on and, if needed, tap Other and re-enter your network information. If you continue to have problems, check with your IT department on Monday.
In the meantime, your laptop and iTunes can be used to purchase apps and music. Syncing them with your touch is a great way to get them installed while you are waiting for the answer on your WiFi problem. -
I successfully downloaded elements 11 to my pc but it won't load when I click on the program or double click on the icon. help.
You say you downloaded, but have you completed the installation?
On Windows there is often two files. They need to be unzipped (Extract Files) and everything placed in a single folder. From there you run setup.
Maybe you are looking for
-
Okay so my partner and i have been working on this project for a while now and we are stuck with two thing. First we can't get the enemy sprite to go into the enemy picture box. Second we can't get the sprite sheet to shift down. We have tried multip
-
Hi, While Doing Miro delivery cost line item is not generated.We had modified earlier 2 yrs back condition for freight as ZFRC .It is working fine.But for this PO that particular item was not showing. Actual Below in MIRO transaction it shows seperat
-
How to directly call business object class from backing bean class
I woul like to call business object class directly from the backing bean class and implement methods in BO. If possible can anyone give an example code. Thanks in advance
-
Hi, A manual Z condition for delivery cost in PO shows in header as : Cond.control : D Fixed and Condit.origin :E Item total. (Click details for condition). In item it shows Cond.control : D Fixed and Condit.origin :GOriginal header condition. This i
-
Can I run automatically another report after a runned report?
Hi. Can I run automatically in another report after a runned report? Like: I open a report, I click on Run/View and then the pdf is on screen BI Publisher runs another report (on screen)? Thank you, bye R. Edited by: user12003776 on May 18, 2011 5:29