The worker process for application pool 'MSExchangeAutodiscoverAppPool' encountered an error
Hello Guys,
I am getting an event ID 2297 with the description given below.
The worker process for application pool 'MSExchangeAutodiscoverAppPool' encountered an error 'Cannot add duplicate collection entry of type 'add' with unique key attribute 'name' set to 'WSMan'
' trying to read global module configuration data from file '\\?\C:\inetpub\temp\apppools\MSExchangeAutodiscoverAppPool\MSExchangeAutodiscoverAppPool.config', line number '275'. Worker process startup aborted.
Could someone help me please to resolve this.
Thanks in Advance. :)
Regards Rishi Aggarwal
Hi,
Based on the error message, it seems the issue is related to that there is a duplicate entry in the file it mentioned.
I recommend you follow Amit’s suggestions to check result.
Best regards,
Belinda Ma
TechNet Community Support
Similar Messages
-
Event ID 2776 The worker process failed to initialise correctly and therefore could not be started
Hi All,
I'm getting the dreaded 503 Service Unavailable error on a freshly installed instance of SharePoint 2013 Foundation on a 2008 Server.
I get this error when I try opening the Central Administration Console.
It would appear that the worker process for the Central Administration console is crashing.
In the System event log, I see a stack of 5009 Errors:
Event Id 5009, WAS
A process serving application pool 'SharePoint Central Administration V4' has terminated unexpectedly.
Then I get an error:
Event id 5009, WAS
Application pool 'SharePoint Central Administration V4' is being automatically disabled due to a series of failures.
What I see:
In IIS, Both these application pools have stopped:
SharePoint Central Administration v4
SecurityTokenServiceApplicationPool
If I start them up, then try accessing the Central Administration portal in IE, I get a 503 error, Service Unavailable
When I check out the pools in IIS Manager, both pools have stopped.
What I've tried:
Ensured the password Identity is correct for each pool (the one that was used during the install, DB Account)
Ensured that 32 bit Applications are disabled for both Application pools
Ensured that the DB Account user has the following policy rights:
Logon as a service
Logon as a batch job
Replace a process level token
Any other ideas?
Thanks
JasonHI Jason,It seems that the issue is with the application pool only.make sure that the application pool is started and set with the correct credentials.please check the links below that explains more details of the issues.
http://expertsharepoint.blogspot.de/2013/11/error-application-pool-keeps-stopping.html
http://expertsharepoint.blogspot.de/2013/11/error-application-pool-keeps-stopping.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adilHI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil -
Increase the number of background work processes for data load performance
Hi all,
There are 10 available background work processes in the BW system. We're doing some mass load to multiple ODS.But system uses only 3 background processes. How can i
increase the number of used background work processes for new data load.
I tried to change number of prosesses with RSODSO_SETTINGS. But no successes. Are there any other settings need to change?
thanks,
YigitHi sankar,
I entered the max proc. number into ROIDOCPRMS. But it doesn't make difference. System still uses only 3 of background processes. RSCUSTA2 is replaced with
RSODSO_SETTINGS in BI 7.0 and this trans. can only change the processes for data activation, SID generation and rollback. I need to change the process numbers for data extraction. -
Hi i have deployed a sandbox solution using visual stdio2012 on share-point 2013 site at my local machine. when i tried to add web parts from custom folder to web part zone following error comes "An unknown exception occurred while executing a sand
boxed code solution request in the worker process."
how ever this is working on sharepoint online site. but not only on my local sharepoint site
Can anyone help me . reply will be appreciated.
Thanks in advance.
Ritu RanjanGuYuming,
You have not yet addressed the original issue, please DO NOT mark this as answered. The suggestion to use the ulsviewer would only help in finding out more about the issue, but will not solve the unknown exception. I have been able to duplicate
the problem in my Development Environment and it seems to be related to permissions or running the SP 2013 "Development" environment on a Windows Server 2012 Domain Controller (to support single machine development).
Ritu Ranjan,
I found a post with a similar issue but might be related to this post as well.
http://social.technet.microsoft.com/Forums/en-US/sharepointadmin/thread/b7408608-c21b-45d9-bc16-e6afff510cd2. I tried switching the User Code Host account from the farm account to the App Pool account but the error stays the same.
Here is information from the ULS to provide more details to anyone who would like to help resolve this issue:
01/27/2013 12:11:38.38 SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium - - An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0 - userCodeWrapperType.FullName = "Microsoft.SharePoint.UserCode.SPUserCodeWebPartWrapper", userAssemblyGroup
= ".UserCodeAssemblyGroupId = ", GroupId = "081B51E0AD7645D4A38ADD78D5AA9F9E-uNL2pPMjZ3/km03rur+D1AZ1Qe8Fs6BnPIuoCN/pgcU="", .RootDirectoryPath = "C:\ProgramData\Microsoft\SharePoint\UCCache\8CFCA978EB52EC0\081B51E0AD7645D4A38ADD78D5AA9F9E%2DuNL2pPMjZ3%2547km03rur%2BD1AZ1Qe8Fs6BnPIuoCN%2547pgcU%3D-1"",
siteCollectionId = e116e750-38ff-4c55-aca4-acd04a69aff6 - Inner Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.Remoting.RemotingException: An attempt to connect to the
remote activator ... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...failed with exception 'System.Runtime.Remoting.RemotingException: Cannot resolve 'channel' template reference: 'http client'. at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ReportUnableToResolveTemplateReferenceError(ConfigNode
node, String referenceName, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsChannelNode(ConfigNode node, RemotingXmlConfigFileData configData, Boolean isTemplate)
at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsNode(ConfigNode node, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessApplicationNode(ConfigNode
node, RemotingXmlConfigFileData configData) at System.Runt... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...ime.Remoting.Activation.RemotingXmlConfigFileParser.ParseConfigNode(ConfigNode rootNode) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseDefaultConfiguration()
at System.Runtime.Remoting.RemotingConfigHandler.LoadMachineConfigIfNecessary() at System.Runtime.Remoting.RemotingConfigHandler.FindDelayLoadChannelForCreateMessageSink(String url, Object data, String& objectURI)
at System.Runtime.Remoting.RemotingServices.CreateChannelSink(String url, Object data, IMessageSink& chnlSink) at System.Runtime.Remoting.RemotingServices.Unmarshal(Type classToProxy, String url, Object data)
at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage ctorMsg)'. at System.Runtime.Remoting.Activation.LocalActivator.DoRem... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...oteActivation(IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Activation.LocalActivator.Activate(IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Messaging.ClientContextTerminatorSink.SyncProcessMessage(IMessage
reqMsg) at System.Runtime.Remoting.Activation.ActivationServices.Activate(RemotingProxy remProxy, IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(IMessage reqMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.SharePoint.SPSite_SubsetProxy..ctor() --- End of inner exception stack trace ---
Server stack trace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCac... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...hed, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark&
stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, BindingFlags
bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes) at System.Activator.CreateInstance(Type type,... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ... Object[] args, Object[] activationAttributes) at Microsoft.SharePoint.SPSite.__CreateInstance_SPSite(Boolean forStaticMethod, Object[] constructorParameters) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken__Inner(Byte[]
userCodeToken) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken(Byte[] userCodeToken) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.SetBinaryTokens(Byte[] binaryUserCodeToken,
Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid
siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionCo... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...ntext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup
userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeAppDomain.Execute(Type
userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId)
at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxyForShim.ExecuteIntern... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...al(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext)
at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxy.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnM... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...essage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.ExecuteDelegate.EndInvoke(IAsyncResult
result) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, SPUserToken userToken, String currentAffinity, SPUserCodeExecutionContext
executionContext) a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41 SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium - - An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0 - Monitored process "ipc://25989203-dc18-4882-8d49-1640047f95e9:7000" has encountered a Pipeline Termination
exception while executing user code. - Inner Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.Remoting.RemotingException: An attempt to connect to the remote activator
failed with exception 'System.Runtime.Remoting.RemotingException: Cannot resolve 'channel' template reference: 'http client'. at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ReportUnableToResolveTemplateReferenceError(ConfigNode
node, String referenceName, RemotingXmlConfigFileData configData) at... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ... System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsChannelNode(ConfigNode node, RemotingXmlConfigFileData configData, Boolean isTemplate) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsNode(ConfigNode
node, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessApplicationNode(ConfigNode node, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseConfigNode(ConfigNode
rootNode) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseDefaultConfiguration() at System.Runtime.Remoting.RemotingConfigHandler.LoadMachineConfigIfNecessary()
at System.Runtime.Remoting.RemotingConfigHandler... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ....FindDelayLoadChannelForCreateMessageSink(String url, Object data, String& objectURI) at System.Runtime.Remoting.RemotingServices.CreateChannelSink(String url, Object data, IMessageSink&
chnlSink) at System.Runtime.Remoting.RemotingServices.Unmarshal(Type classToProxy, String url, Object data) at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage ctorMsg)'.
at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Activation.LocalActivator.Activate(IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Messaging.ClientContextTerminatorSink.SyncProcessMessage(IMessage
reqMsg) at System.Runtime.Remoting.Activation.ActivationServices.Activate(... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ...RemotingProxy remProxy, IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(IMessage reqMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.SharePoint.SPSite_SubsetProxy..ctor() --- End of inner exception stack trace --- Server stack trace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType
type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean
fillCache, StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackC... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ...rawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic) at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder,
Object[] args, CultureInfo culture, Object[] activationAttributes, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Activator.CreateInstance(Type type, Object[] args, Object[] activationAttributes) at Microsoft.SharePoint.SPSite.__CreateInstance_SPSite(Boolean forStaticMethod, Object[] constructorParameters) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken__Inner(Byte[]
userCodeToken) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeT... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ...oken(Byte[] userCodeToken) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.SetBinaryTokens(Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext
executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken,
SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup,
Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExec... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ...utionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeAppDomain.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup
userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxyForShim.ExecuteInternal(Type
userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxy.Execute(Type
userCodeWrapperType, SPUserCodeCachedAssem... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ...blyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr
md, Object[] args, Object server, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.ExecuteDelegate.EndInvoke(IAsyncResult
result) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.Execute(Type use... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ...rCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, SPUserToken userToken, String currentAffinity, SPUserCodeExecutionContext executionContext) a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42 SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium - - An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0 - Request executing userSolution Id "081b51e0-ad76-45d4-a38a-dd78d5aa9f9e" for site collection id "
e116e750-38ff-4c55-aca4-acd04a69aff6" has encountered an unhandled exception while executing user code. - Inner Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.Remoting.RemotingException:
An attempt to connect to the remote activator failed with exception 'System.Runtime.Remoting.RemotingException: Cannot resolve 'channel' template reference: 'http client'. at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ReportUnableToResolveTemplateReferenceError(ConfigNode
node, String r... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...eferenceName, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsChannelNode(ConfigNode node, RemotingXmlConfigFileData configData,
Boolean isTemplate) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsNode(ConfigNode node, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessApplicationNode(ConfigNode
node, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseConfigNode(ConfigNode rootNode) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseDefaultConfiguration()
at System.Runtime.Remoting.RemotingConfigHandler.LoadMachineConfigIfNecess... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...ary() at System.Runtime.Remoting.RemotingConfigHandler.FindDelayLoadChannelForCreateMessageSink(String url, Object data, String& objectURI) at System.Runtime.Remoting.RemotingServices.CreateChannelSink(String
url, Object data, IMessageSink& chnlSink) at System.Runtime.Remoting.RemotingServices.Unmarshal(Type classToProxy, String url, Object data) at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage
ctorMsg)'. at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Activation.LocalActivator.Activate(IConstructionCallMessage ctorMsg)
at System.Runtime.Remoting.Messaging.ClientContextTerminatorSink.SyncProcessMessage(IMessage reqMsg) at Syste... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...m.Runtime.Remoting.Activation.ActivationServices.Activate(RemotingProxy remProxy, IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(IMessage reqMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.SharePoint.SPSite_SubsetProxy..ctor() --- End of inner exception stack trace ---
Server stack trace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean pu... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...blicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic) at System.RuntimeType.CreateInstanceImpl(BindingFlags
bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo
culture, Object[] activationAttributes) at System.Activator.CreateInstance(Type type, Object[] args, Object[] activationAttributes) at Microsoft.SharePoint.SPSite.__CreateInstance_SPSite(Boolean forStaticMethod,
Object[] constructorParameters) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken__Inner(Byte[] userCodeToken) a... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...t Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken(Byte[] userCodeToken) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.SetBinaryTokens(Byte[] binaryUserCodeToken,
Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid
siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type
userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binar... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...yUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeAppDomain.Execute(Type
userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId)
at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxyForShim.ExecuteInternal(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext
executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessPro... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...xy.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.ExecuteDelegate.EndInvoke(IAsyncResult result) at Microsoft.Sh... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...arePoint.UserCode.SPUserCodeWorkerProcess.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, SPUserToken userToken, String currentAffinity, SPUserCodeExecutionContext
executionContext) a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82 SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium - - An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0 - Worker Process Pipeline unrecoverable failure: FullName = "Microsoft.SharePoint.UserCode.SPUserCodeWebPartWrapper",
userAssemblyGroup = ".UserCodeAssemblyGroupId = ", GroupId = "081B51E0AD7645D4A38ADD78D5AA9F9E-uNL2pPMjZ3/km03rur+D1AZ1Qe8Fs6BnPIuoCN/pgcU="", .RootDirectoryPath = "C:\ProgramData\Microsoft\SharePoint\UCCache\8CFCA978EB52EC0\081B51E0AD7645D4A38ADD78D5AA9F9E%2DuNL2pPMjZ3%2547km03rur%2BD1AZ1Qe8Fs6BnPIuoCN%2547pgcU%3D-1"",
siteCollectionId = e116e750-38ff-4c55-aca4-acd04a69aff6 - Inner Exception: Microsoft.SharePoint.UserCode.SPUserCodeExecutionPipelineTerminallyFailedException: An unknown exception occurred while executing a sandboxed code solution request in the... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ... worker process.\r\n|0 ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.Remoting.RemotingException: An attempt to connect to the remote
activator failed with exception 'System.Runtime.Remoting.RemotingException: Cannot resolve 'channel' template reference: 'http client'. at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ReportUnableToResolveTemplateReferenceError(ConfigNode
node, String referenceName, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsChannelNode(ConfigNode node, RemotingXmlConfigFileData configData, Boolean isTemplate)
at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsN... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...ode(ConfigNode node, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessApplicationNode(ConfigNode node, RemotingXmlConfigFileData configData)
at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseConfigNode(ConfigNode rootNode) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseDefaultConfiguration() at System.Runtime.Remoting.RemotingConfigHandler.LoadMachineConfigIfNecessary()
at System.Runtime.Remoting.RemotingConfigHandler.FindDelayLoadChannelForCreateMessageSink(String url, Object data, String& objectURI) at System.Runtime.Remoting.RemotingServices.CreateChannelSink(String url, Object data, IMessageSink&
chnlSink) at System.Runtime.Remoting.RemotingServices.Unm... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...arshal(Type classToProxy, String url, Object data) at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage ctorMsg)'. at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage
ctorMsg) at System.Runtime.Remoting.Activation.LocalActivator.Activate(IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Messaging.ClientContextTerminatorSink.SyncProcessMessage(IMessage reqMsg)
at System.Runtime.Remoting.Activation.ActivationServices.Activate(RemotingProxy remProxy, IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(IMessage reqMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.Sha... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...rePoint.SPSite_SubsetProxy..ctor() --- End of inner exception stack trace --- Server stack trace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType
type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean
fillCache, StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type
type, Boolean nonPublic) at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, StackCraw... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...lMark& stackMark) at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Activator.CreateInstance(Type type, Object[] args, Object[] activationAttributes) at Microsoft.SharePoint.SPSite.__CreateInstance_SPSite(Boolean forStaticMethod, Object[] constructorParameters) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken__Inner(Byte[]
userCodeToken) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken(Byte[] userCodeToken) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.SetBinaryTokens(Byte[] binaryUserCodeToken,
Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at Microsoft.SharePoint.UserC... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...ode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext
executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId,
Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeAppDomain.Execute(Type userCodeWrapperType,
SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] bin... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...aryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxyForShim.ExecuteInternal(Type
userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxy.Execute(Type
userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr
md, Object[]... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ... args, Object server, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.ExecuteDelegate.EndInvoke(IAsyncResult
result) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, SPUserToken userToken, String currentAffinity, SPUserCodeExecutionContext
executionContext) --- End of inner exception stack trace --- at Microsoft.ShareP... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...oint.UserCode.SPUserCodeWorkerProcess.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, SPUserToken userToken, String currentAffinity, SPUserCodeExecutionContext
executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeExecutionHost.Execute(Type userCodeWrapperType, Guid siteCollectionId, SPUserToken userToken, String affinity, SPUserCodeExecutionContext executionContext) a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.85 SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ebh5 Monitorable - Stopping and restarting worker processes because of an unhandled exception. Shim PID: "0x0FD8" Proxy PID: "0x0FC8"
01/27/2013 12:11:38.96 SPUCHostService.exe (0x0E60) 0x1164 SharePoint Foundation Sandboxed Code Service
aeqw6 Monitorable - Stopping shim process. Shim process name: "SPUCWorkerProcess" Shim PID: "0x0FD8" Shim service url: "ipc://25989203-dc18-4882-8d49-1640047f95e9:7000"
01/27/2013 12:11:39.07 SPUCHostService.exe (0x0E60) 0x1164 SharePoint Foundation Sandboxed Code Service
aeqw7 Monitorable - Stopping proxy process. Proxy process name: "SPUCWorkerProcessProxy" Proxy PID: "0x0FC8" Proxy service url: "ipc://305d6f3b-f836-4adf-9fcf-ad4687d27fc3:7000"
01/27/2013 12:11:39.18 SPUCWorkerProcessProxy.exe (0x0FC8) 0x0FCC SharePoint Foundation Unified Logging Service 8wsw High
Now terminating ULS (SPUCWorkerProcessProxy.exe, onetnative.dll)
01/27/2013 12:11:39.27 SPUCHostService.exe (0x0E60) 0x14B8 SharePoint Foundation General
84yj Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_DATA.
01/27/2013 12:11:39.27 SPUCHostService.exe (0x0E60) 0x14B8 SharePoint Foundation Sandboxed Code Service
d1ul Unexpected - Monitoring could not find the perf counters associated with the shim user code process, PID="0", disable monitoring.
01/27/2013 12:11:45.82 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Unified Logging Service b8fx High
ULS Init Completed (SPUCWorkerProcessProxy.exe, onetnative.dll)
01/27/2013 12:11:46.44 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Topology
2myf Medium Disabling the configuration filesystem and memory caches.
01/27/2013 12:11:46.50 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Upgrade
ajyw6 High 01/27/2013 12:11:46.50 SPUCWorkerProcessProxy (0x1604) 0x1780 SharePoint Foundation Upgrade SPHierarchyManager ajyw6 DEBUG [SPTree Value=SPConfigurationDatabase] added to dependency cache by lookup 00000000-0000-0000-0000-000000000000
01/27/2013 12:11:46.63 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Upgrade
ajyx0 High 01/27/2013 12:11:46.63 SPUCWorkerProcessProxy (0x1604) 0x1780 SharePoint Foundation Upgrade SPDelegateManager ajyx0 DEBUG Waiting for mutex to initialize type dictionary 00000000-0000-0000-0000-000000000000
01/27/2013 12:11:52.30 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Database
8u1d High Flushing connection pool 'Data Source=SPDB;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15'
01/27/2013 12:11:52.30 SPUCWorkerProcessProxy.exe (0x1604) 0x0E04 SharePoint Foundation Database
8u1d High Flushing connection pool 'Data Source=SPDB;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15'
01/27/2013 12:11:52.30 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation General
avew High An application domain named SPUCWorkerProcessProxy.exe has just been loaded.
01/27/2013 12:11:52.32 SPUCWorkerProcessProxy.exe (0x1604) 0x0E04 SharePoint Foundation Topology
2myf Medium Enabling the configuration filesystem and memory caches.
01/27/2013 12:11:52.32 SPUCWorkerProcessProxy.exe (0x1604) 0x0E04 SharePoint Foundation Topology
aik7t High Set the certificate validation policy for this app domain to the SharePoint certificate validator.
01/27/2013 12:11:52.33 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Topology
2q0j Medium The configuration subsystem was initialized by multiple threads. One of the caches will be disposed.
01/27/2013 12:11:52.33 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Topology
2q0k Medium Disposing of an SPConfigurationDatabase reference from:
01/27/2013 12:11:52.33 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Monitoring
b4ly High Leaving Monitored Scope (Initializing Admin OM). Execution Time=6138.56866568698
01/27/2013 12:11:52.33 SPUCWorkerProcessProxy.exe (0x1604) 0x0E04 SharePoint Foundation Monitoring
b4ly High Leaving Monitored Scope (Initializing Admin OM). Execution Time=5221.37511562071
01/27/2013 12:11:52.71 SPUCWorkerProcessProxy.exe (0x1604) 0x1230 SharePoint Foundation General
00000 Medium Microsoft SharePoint Foundation log file
01/27/2013 12:11:52.71 SPUCWorkerProcessProxy.exe (0x1604) 0x1230 SharePoint Foundation General
94vw Medium Primary Domain = DEV15, Computer Name = SPDEVBOX
01/27/2013 12:11:52.82 SPUCWorkerProcessProxy.exe (0x1604) 0x1230 SharePoint Foundation Object Cache
9j6t High SPXmlDocCache cache parameters are: high water mark 10485760 bytes, low water mark 5242880 bytes, interval 180000 ms -
The parallel process for mrp.
hi exports
we plan to do the scope of planning for the total planning as a background job.
while doing that system ask for the parallal processing for mrp
what is customize step and procedure to do the parallel process for mrp.Dear Raj,
With the help of parallel processing procedures, you can significantly improve the runtime of the total planning run.
To process in parallel, you can either select various sessions on the application server or various servers.
Parallel processing runs according to packages using the low-level code logic:
The work package, with a fixed number of materials that are internally defined in the program, is distributed over the individual servers/sessions. Once a server/session has finished processing a package, it starts processing the next package.
If a low-level code is being planned, the servers/sessions that have finished must wait until the last server/session has finished its package to avoid inconsistencies. Then the next low-level code is processed per packages.
The parallel processing procedure is switched on in the initial screen of total planning.
Activities
Define the application server with the number of sessions that can be used:
If you want to define various servers for parallel processing, enter the server with the number of sessions.
If you only want to use one server, but several sessions, enter the application server and the appropriate number of sessions.
Further notes
Parallel processing shortens the time required for calculation, however, it cannot shorten the database time as the system still only operates using one database.
The Customizing Transaction is OMIQ
Regards
PSV -
Issue:
On a vanilla installation, the sandboxed code service (e.g. SPUCHostService.exe) is started; however, SPUCWorkerProcessProxy.exe and subsequently SPUCWorkerProcess.exe fails to start.
Resolution/Workarounds attempted:
Attempted 2 different Load balancing settings – local and remote (i.e. affinity)
Ensured local computer policy on server for ‘RPC Endpoint Mapper Client Authentication’ and ‘Restrictions for Unauthenticated RPC clients’ is disabled.
Ensured following key in registry is set properly - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\RPC
Attempted to bypass SharePoint’s check for certificate revocations at crl.microsoft.com
Ensured the service account is added to the respective groups (e.g. Performance Log Users, Performance Monitor Users, IIS_IUSRS, WSS_ADMIN_WPG, WSS_WPG)
Increased limit of ‘AbnormalProcessTerminationCount’ of SPUserCodeService via Powershell
We have tried all possible workarounds from the following MSDN reference:
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/08/error-the-sandboxed-code-execution-request-was-refused-because-the-sandboxed-code-host-service-was-too-busy-to-handle-the-request.aspx
ULS:
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service fe8a
Medium - - Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service fe8c
Medium - - Error activating the worker process manager instance within the worker process. - Inner Exception: System.InvalidOperationException: Unable to activate worker
process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000 at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service ei0t
Medium - Process creation/initialization threw an exception. Stopping this process. "ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000"
02/21/2014 05:24:50.65 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service
fe87 Medium - - Error activating the worker process manager instance within
the worker process. - Starting worker process threw - Inner Exception: System.InvalidOperationException: Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000 at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
Any other insights on how I can troubleshoot the issue described?
Thanks in advance!Hi ,
For resolving your issue , you can do as the followings:
1. Logged into the Web Server with the Timer Service Account.
2. Ran the powershell command to check the SID of the account running the spucworkerprocessproxy.exe:
$(Get-SPManagedAccount -Identity "THE SERVICE ACCOUNT").Sid.Value
3. Checked the registry :
HKEY_USERS\[SID OF THE SERVICE ACCOUNT]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State
4. Changed the value 0x00023c00 to 0x00023e00
In addition, here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/aae497df-5f0d-4f86-a724-c7b805ccd07f/sharepoint-sandboxed-code-service-troubles?forum=sharepointgeneralprevious
http://blogs.technet.com/b/operationsguy/archive/2011/01/17/sharepoint-2010-sandboxed-code-solutions-and-web-proxy.aspx
http://social.msdn.microsoft.com/Forums/en-US/c21e2c3a-a259-4d5f-8071-eff52b7bddc3/issue-sandbox-solution-too-busy-to-handle-the-request?forum=sharepointgeneralprevious
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
Error: 1056603 Unable to spawn process for application [AppName]
Hi,
After a fresh installation of Essbase Server (11.1.1.4), I'm experiencing the following error when attempting to perform basically any action on any Application (Start, Stop, Delete) through EAS:
*Error: 1056603 Unable to spawn process for application [Demo]. Please ensure that adequate memory is available.*
System memory seems abundant at around 5% usage with all relevant services started, but I even doubled it (since it's a VM) to 16Gb just to make sure, the issue persists.
Having a look at the Essbase server log, I didn't find any additional info that could be helpful:
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///2412/Info(1051160)
Received Validate Login Session request
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///2380/Info(1051001)
Received client request: Get App and Database Status (from user [admin])
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Info(1051001)
Received client request: MaxL: Execute (from user [admin])
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Error(1056603)
Unable to spawn process for application [Demo]. Please ensure that adequate memory is available.
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Error(1054001)
Cannot load application Demo with error number [1056603] - see server log file
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Warning(1051003)
Error 1054001 processing request [MaxL: Execute] - disconnecting
And when the Essbase service is started, essbase.log also seems to be pretty normal:
[Thu Oct 11 15:18:13 2012]Local/ESSBASE0///2376/Info(1051001)
Received client request: Logout (from user [admin])
[Thu Oct 11 15:18:13 2012]Local/ESSBASE0///2376/Info(1051037)
Logging out user [admin], active for 29 minutes
[Thu Oct 11 15:18:19 2012]Local/ESSBASE0///1236/Info(1051243)
Exclusive operation security file compaction started. This may take a while
[Thu Oct 11 15:18:19 2012]Local/ESSBASE0///1236/Info(1051244)
Security file compaction completed
[Thu Oct 11 15:18:19 2012]Local/ESSBASE0///1236/Info(1051052)
Essbase Server - finished
[Thu Oct 11 15:18:23 2012]Local/ESSBASE0///2620/Info(1051283)
Retrieving License Information Please Wait...
[Thu Oct 11 15:18:23 2012]Local/ESSBASE0///2620/Info(1051286)
License information retrieved.
[Thu Oct 11 15:18:29 2012]Local/ESSBASE0///2620/Info(1051199)
Single Sign-On Initialization Succeeded !
[Thu Oct 11 15:18:29 2012]Local/ESSBASE0///2620/Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051134)
External Authentication Module: [Single Sign-On] enabled
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051051)
Essbase Server - started
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051243)
Exclusive operation security file compaction started. This may take a while
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051244)
Security file compaction completed
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051052)
Essbase Server - finished
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2120/Info(1051283)
Retrieving License Information Please Wait...
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2120/Info(1051286)
License information retrieved.
[Thu Oct 11 15:18:37 2012]Local/ESSBASE0///2120/Info(1051199)
Single Sign-On Initialization Succeeded !
[Thu Oct 11 15:18:37 2012]Local/ESSBASE0///2120/Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
Any ideas on what may be causing this?
Thanks in advance!
nHi Nelson,
Did you try increasing the Heap size for EAS ? Try the following and check if you still get the error -
increase the Java heap settings in the EAS script on a Unix platform that was configured using the automatic deployment method, do the following:
1. Navigate to the $HYPERION_HOME/deployments/{appserver}/bin directory.
2. Edit the setCustomParamseas.sh(.bat) script.
3. Modify or add the -Xms and -Xmx settings to the JAVA_OPTIONS variable. For example:
+JAVA_OPTIONS="-Xms256m -Xmx1024m -DComponentName=eas -DcomponentId=1e3bf92b2d9bb0493bcd3380127b0ca49ee7f50 -Dsun.net.inetaddr.ttl=0 -DHYPERION_HOME=/usr/local/oracle/hyperion -Dhyperion.home=/usr/local/oracle/hyperion -DEAS_HOME=/usr/local/oracle/hyperion/products/Essbase/eas -DESS_ES_HOME=/usr/local/oracle/hyperion/products/Essbase/eas/server -DEAS_LOG_LEVEL=5000 -DEAS_LOG_LOCATION=/usr/local/oracle/hyperion/logs/eas/easserver.log -DCLIENT_SERVER_DIFF_MC=true -Dweblogic.j2ee.application.tmpDir=/usr/local/oracle/hyperion/deployments/temp -Djava.io.tmpdir=/usr/local/oracle/hyperion/tmp ${JAVA_OPTIONS} "+
+*Note: For Tomcat deployments, the setting to modify is JAVA_OPTS:*+
+*JAVA_OPTS="-Xms256m -Xmx1024m*+
4. Stop and restart EAS for the setting to take effect.
Hope it helps....
KosuruS -
I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068643839
Start time: 2012-07-31 16:23:37
End time: 2012-07-31 16:33:32
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for IS: Use the following information to resolve the error, and then try the setup process again.
Next step for AS: Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: Haansi-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2005 SQLEXPRESS MSSQL.1
Database Engine Services 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SQL Server Replication 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SharedTools 1033
Express Edition 9.4.5000 No
SQL Server 2005
Tools 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.4.5000 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 Database Engine Services 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 SQL Server Replication 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1617.0 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2318.0 No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SS2012
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSOLAP$SS2012
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: PC\Haansi
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SS2012
INSTANCENAME: SS2012
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SS2012
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SS2012
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Haansi-PC\Haansi
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htmPlease help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm -
What is the Learning Process for SAP Business ByDesign
Hi Experts,
What is the Learning Process for SAP Business ByDesign
Prashant KapoorHI prasanth,
SAP-ByD always updated day to day. you can find here:
https://my020062.sapbydesign.com/sap/ap/ui/repository/SAP_BYD_WEKTRA/CP/sapLSUIContentPlayerTestPage.html?manifest=067D03A7602B1D490899DF46B5082089&COMPONENT=A1S_PDI&RELEASE=260&LANGUAGE=en®ION=&INDUSTRY=&TASK=CR_VIEW&sap-language=EN
Note: do u want open the above link u might have a .net framework4.0 bcz this one silverlight application.
Best Regards,
Harish.y -
DB connect problem,Disp+Work.exe dies and the work processes die on startup
Dear Experts,
I am getting the error on SAP startup,Disp+Work.exe dies and the work processes die on startup.
I found below error in my DEV_W0 trace as below
*failed to establish conn to np:(local).*
*C Retrying without protocol specifier: (local)*
*C Provider SQLNCLI could not be initialized. See note #734034 for more information.*
*C Using provider SQLOLEDB instead.*
*C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']*
*C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.*
*C Procname: [ExecuteAndFlush - no proc]*
But i could see the user 'pec' is availble in my database users list with db_owner , public permissions also been assigned to it.
However When trying to delete a user on SQL server 2000, we recieve the message "You cannot drop the selected login ID because that login ID owns objects in one or more databases.".
Please refer the below work process trace and please suggest the possible solution..
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sat Feb 14 15:10:21 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' ...
B Library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.195)
B New connection 0 created
M sysno 00
M sid PEC
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 196
M intno 20020600
M make: multithreaded, Unicode
M pid 3844
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3844) [dpxxdisp.c 1162]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 21120 (1320)
M DpShMCreate: sizeof(tm_adm) 29558776 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 1160000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (384056/329560/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07800040, size: 31492672)
M DpShMCreate: allocated sys_adm at 07800040
M DpShMCreate: allocated wp_adm at 07801B88
M DpShMCreate: allocated tm_adm_list at 07806E08
M DpShMCreate: allocated tm_adm at 07806E30
M DpShMCreate: allocated wp_ca_adm at 09437628
M DpShMCreate: allocated appc_ca_adm at 0943D3E8
M DpShMCreate: allocated comm_adm_list at 0943F328
M DpShMCreate: allocated comm_adm at 0943F340
M DpShMCreate: allocated vmc_adm_list at 0955A680
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0955A6A8
M DpShMCreate: allocated wall_adm at 0955A6B0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sat Feb 14 15:10:22 2009
M calling db_connect ...
C Thread ID:3868
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 195
C patchcomment DBCON: database names must not start with digits (1078650)
C np:(local) connection used on CAMBSVR15
C CopyLocalParameters: dbuser is 'pec'
C
C Sat Feb 14 15:10:23 2009
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C
C Sat Feb 14 15:10:26 2009
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1280]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9621]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server cambsvr15_PEC_00 on host cambsvr15 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sat Feb 14 15:10:26 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9806
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3844) [dpnttool.c 357]
I would greatly appriciate your quick response, Since it is a production issue.
Many Thanks,
VinodHi Rohit and Subhadip,
My problem was solved, thanks for your effort.
reason is that, user 'pec' not been associated with login user for the SQL server.
subha : when i execute the first command which you suggested, but couldn't find any user's list.
so i didn't tried with the second command. just to give a final try i have executed the script like below and its worked out.
USE PEC
GO
EXEC sp_change_users_login 'update_one','pec','pec'
GO
Now i see that all work process are starting,,,thank you so much rohit and subhadip
I could have try this first ,when you guys suggested since i couldn't find any output with the first command i didn't proceed with second one.
Since deleting and creating method doesn't seems to be a good, i have just to give a try executed the second command and its worked.
Thanks for your time and patience
Many Thanks,
Vinod -
How to set the working directory for reports in linux
Hi All,
Can you anyone help me to set the working directory for oracle application server 10g reports? I am using RHEL4 and AS10g. Actually i want to run my reports from my define
working directory. How can I do this?
Thanks in advance
ArifHi,
your rep_srv.conf should look like something like
+<?xml version = '1.0' encoding = 'ISO-8859-1'?>+
+<!DOCTYPE server PUBLIC "-//Oracle Corp.//DTD Reports Server Configuration //EN" "file:D:\oracle\FRHome_1/reports/dtd/rwserverconf.dtd">+
+<server version="10.1.2.0.2">+
+<!--Please do not change the id for reports engine.-->+
+<!--The class specifies below is subclass of _EngineClassImplBase and implements EngineInterface.-->+
+<cache class="oracle.reports.cache.RWCache">+
+<property name="cacheSize" value="50"/>+
+<!--property name="cacheDir" value="your cache directory"-->+
+<!--property name="maxCacheFileNumber" value="max number of cache files"-->+
+<!--property name="ignoreParameters" value="parameter names to be ignored in constructing cache key, separated by comma ','"-->+
+</cache>+
+<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="3" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000" jvmOptions="-Xmx512M -Xss512K">+
+<!--property name="sourceDir" value="your reports source directory"/-->+
+<!--property name="tempDir" value="your reports temp directory"/-->+
+<!--property name="keepConnection" value="yes"/-->+
+</engine>+
+...+
some more definitions
+..+
+<!--pluginParam name="proxy" type="file">proxyinfo.xml</pluginParam-->+
+<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>+
+<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>+
+<pluginParam name="textpds" type="file">textpds.conf</pluginParam>+
*<environment id="APP1">*
*+<envVariable name="REPORTS_PATH" value="/application1/reports"/>+*
*+</environment>+*
*+<environment id="APP2">+*
*+<envVariable name="REPORTS_PATH" value="/application2/reports"/>+*
+</environment>+
+</server>+
The environment ids you can choose yourself and you have to put them in there yourself too (here I put two environments for two different applications "1" and "2").
If you call a report from Forms, then you have to code something like
ADD_PARAMETER(p_list,'ENVID',TEXT_PARAMETER,'APP1');
Details depend on how you call your reports, my example is for using a parameter list and calling a report out of application1
Hope that helps.
Volker -
Generic Host Process For Win32 Services Has Encountered a Problem and Needs to Close - J6480
Computer: eMachines T3025 Athlon
OS: Win XP SP3 (recent clean install)
Printer: HP J6480 on wireless network
Printer prints and scans fine wirelessly. I am using the "small footprint" HP drivers to print and scan.
After some hours with printer connected to the computer wirelessly and printing or scanning, I eventually get the
'Generic Host Process For Win32 Services Has Encountered a Problem and Needs to Close' error message and cannot print or scan any longer unless I shutdown and restart Windows.
I have implemented all the fixes (download, reinstall, etc.) listed for this printer on the hp.com site - namely
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00273968&tmp_task=solveCategory&lc=en&dlc=en&cc...
with the exception of changing the firewall setttings to allow hpqtra08.exe to run. This file is not found on my system in my install. The files that are allowed to bypass the firewall are shown below (duplicates listed as shown on my screen)
hpoews01.exe
hponicifs01.exe
hponicifs01.exe
hponicifs01.exe
hposid01.exe
hpqkygrp.exe
hpqtax08
hpznui08.exe
hpznui08.exe
hpznui08.exe
Per the Firewall bypass instructions, the files available in the Digital Imaging\bin location on my machine are
hpiscnapp
hpoews01
hposid01
hposvc08
HpqApKil
hpqkygrp
hpqpprop
hpqqpawp
hpqtax08
hpqtbx01
HPqTrMgr
hpqwrg
hpsjrreg
What else do I need to do to solve this problem once and for all ?Hi,
Please try to update the hot fix then monitory the status again, at same time that error ome times also can cause by virus infection some time please back up important files
update your AV soft then scan the virus.
The relate hot fix:
The Service Host process may stop unexpectedly in Windows Server 2003
http://support.microsoft.com/kb/932762/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Essbase 11.1.1.3 - Unable to spawn process for application
Anyone know how to solve the problem with the error message "Unable to spawn process for application" when trying to create a BSO-application in a newly installed 11.1.1.3 installation.
Hi Nelson,
Did you try increasing the Heap size for EAS ? Try the following and check if you still get the error -
increase the Java heap settings in the EAS script on a Unix platform that was configured using the automatic deployment method, do the following:
1. Navigate to the $HYPERION_HOME/deployments/{appserver}/bin directory.
2. Edit the setCustomParamseas.sh(.bat) script.
3. Modify or add the -Xms and -Xmx settings to the JAVA_OPTIONS variable. For example:
+JAVA_OPTIONS="-Xms256m -Xmx1024m -DComponentName=eas -DcomponentId=1e3bf92b2d9bb0493bcd3380127b0ca49ee7f50 -Dsun.net.inetaddr.ttl=0 -DHYPERION_HOME=/usr/local/oracle/hyperion -Dhyperion.home=/usr/local/oracle/hyperion -DEAS_HOME=/usr/local/oracle/hyperion/products/Essbase/eas -DESS_ES_HOME=/usr/local/oracle/hyperion/products/Essbase/eas/server -DEAS_LOG_LEVEL=5000 -DEAS_LOG_LOCATION=/usr/local/oracle/hyperion/logs/eas/easserver.log -DCLIENT_SERVER_DIFF_MC=true -Dweblogic.j2ee.application.tmpDir=/usr/local/oracle/hyperion/deployments/temp -Djava.io.tmpdir=/usr/local/oracle/hyperion/tmp ${JAVA_OPTIONS} "+
+*Note: For Tomcat deployments, the setting to modify is JAVA_OPTS:*+
+*JAVA_OPTS="-Xms256m -Xmx1024m*+
4. Stop and restart EAS for the setting to take effect.
Hope it helps....
KosuruS -
hello experts this is munna
i am very new to SAP XI. i completed the course and want to know how the work will be.
I want to know how the work process will be in real time. I mean how the work gets and how to interact with the business system and all. And what are the responsibilities as we are the developers, who will work with the SLD and all.
And I want to know about how many business systems and tech systems will be there for a project and all.
Please any one reply me.hi,
As you are new,you use the search functionality of sdn and help.sap.You will get all information.
you can refer to:
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part I
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part II
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III
regards,
ujjwal kumar
Maybe you are looking for
-
Display Port - 50" Full HD Plasma, what adapter?
Hey guys I have this 50" TV, and ofc I want to hook it up with the MB, but how to do it? There is two adapters: Mini DisplayPort to DVI Adapter. "....DVI adapter lets you connect an advanced digital monitor, such as the 20- or 23-inch Apple Cinema Di
-
How to add days to a date value in SQL plus
I would like to perform what ADD_MONTHS does, but for days. I have tried ADD_DAYS with no result. It sais it doesnt recognise the column.
-
Dear guru, We cut a PO to vendor and later we decided to cancel the PO. However the vendor wants to charge a 15% cancellation fee(or restocking fee). I need your opinion on how to handle this situation: 1. if this is a stocked/valuated material, ca
-
Hi, I have created a new company code in PRD. When I want to view the lines items in FBL3N, it displays "No line items can be found". The business user has posted exp and rev account for the company code. It can be display at fs10n but not in fbl3n.
-
Java Desktop System Login to Zone?
Hi all. I have installed Solaris 10 (Kernel version: SunOS 5.10 Generic_137138-09) for i386. I have created a single non-global zone which runs happily and that non-global zone can be accessed with SSH remotely and locally by root. Zlogin also works