The WRT160N's Web Admin Console Keeps Becoming Unaccessible

Hi all,
I just bought a WRT160N v2 Router to replace my WRT54G.
For some reason, after the router runs for a few hours or a day, the Web Admin Console becomes unaccesible to both wired and wireless computers in the network.
I set it up to work on https only, which always worked with WRT54G. And I don't think that is a problem.
It simply works and after a while it doesn't. Resetting the router solves the problem temporarily. It's like the router doesn't accept HTTP requests from anyone all of the sudden.
I disabled firewalls and everything else running on both the wired and wireless clients without success.
I can successfully ping the router IP (192.168.1.1) but pointing to https://192.168.1.1 has no success.

The same thing happened to me when I upgraded to build 11. Now both wired and wireless disconnects occur frequently instead only wireless occasionally. For most devices you can download and re-flash the previous firmware - but not with Linksys I guess. Because I was beyond the 30 days return limit, I ended up buying a cheap Netgear G router (the same as what the Linksys was replacing) which works flawlessly. I will keep the Linksys in hopes that future firmware (if they ever release any) will address these issues. The reason I got the N was faster in network speed and increased wireless range. When it was working, with the build 8, I did have have problems connecting both laptops at the maximum speed for N. I had to downgrade to the standard path.
I bought Linksys because of its affiliation with Cisco, but in hindsight I probably would have tried the Netgear N.
Again, I STILL cannot believe you cannot get the previous firmware version!

Similar Messages

Web Admin Console Hanging

I am trying to open the web admin console but the browser session just hangs - occasionally the session will get to the login screen, but after entering user/password, the session just hangs.
Any ideas please ?
Eric Jones.

The problem persists when accessing directly on the server.
To recap
The OS is Win2008 64-bit.
Software installed in the program file (x86) folder.
The Apache Tomcat homepage is also inaccessible.
After approximately 20 minutes the Apache Tomcat homepage will render.
This suggests the installation is correct, just very slow.
Eric.

CAM Web Admin Console is Unavailable

Hi All,
We have two CAM appliances and they are configured in HA mode. Today i have noticed that one of them is active and the other one is dead and I can't access it by using web admin console although i can access it by CLI and I can ping the active one from it and also ping the failover IP. What is the reason of the following error message? why couldn't I access its web admin console?
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Thanks in advance.

Hi Faisal,
Thanks for your reply.
The failover interfaces are UP-UP on the two switches that are connected to the CAM appliances. please find below the status of the two failover interfaces on both appliance as they can't ping each other:
[root@CAM1 ~]# ifconfig eth1
eth1      Link encap:Ethernet HWaddr 00:26:55:1E:1D:62
          inet addr:10.10.10.5 Bcast:10.10.10.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:57 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:12132 (11.8 KiB) TX bytes:192 (192.0 b)
          Interrupt:82 Memory:fa000000-fa012100
[root@CAM1 ~]# ping 10.10.10.6
PING 10.10.10.6 (10.10.10.6) 56(84) bytes of data.
ping: sendmsg: No such process
ping: sendmsg: No such process
ping: sendmsg: No such process
[root@CAM2 ~]# ifconfig eth1
eth1      Link encap:Ethernet HWaddr 00:26:55:1E:5A:A2
          inet addr:10.10.10.6 Bcast:10.10.10.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:179 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1543 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:91286 (89.1 KiB) TX bytes:277538 (271.0 KiB)
          Interrupt:82 Memory:fa000000-fa012100
[root@CAM2 ~]# ping 10.10.10.5
PING 10.10.10.5 (10.10.10.5) 56(84) bytes of data.
So, what can i do to solve that problem??

Finding the url for Portal Admin console

Hi all,
I got a portal .ear file from my team member to deploy on an env with Weblogic portal 10.3.2. The Application is deployed fine and is in Active state.
Now I need to find the exact url for the portal Admin console. I am not able to find which xml file to look into under the ear file to find the url for the portal Admin console.
thanks in advance..
PMR..

Hi All
I am interesting to work in weblogic administration but i dont have experiance.
Now i am working in java/jee application which is deployed in weblogic 10.3.
I know the deployment in weblogic.
Can any one help me how to learn weblogic administration.
Thanks
Ram
Edited by: user10979302 on May 2, 2011 10:33 PM

Unable to connect to the Essbase server from Admin console

Hi,
I have installed Essbase Server 9.3, Client 9.3 and Administration Server 9.3 in my laptop.
The Essbase server is working fine. I am able to see all the sample applications from Excel add in. (This mean client is also working fine).
But, the problem is when i try to connect to the Essbase server, its not allowing me by producing an error:
"Unable to connect to the Essbase server please check the user name & password"
username: admin
password; password.
i tried several times...but its not working.
Please advise me.
FYI, The admin server service is started already.

Hi Subrahmanyam,
Here , there are 2 things
1. Check, your essbase server is up and running ,and your admin service is up. Now , when you open the 'essbase admin console ' , provide user name and password as
admin
password
2. After you are connected to the console i.e admin console .
You see
enterprise view -> essbase analytic server -> under this , you might see your host name ( i.e of your laptop).
This host is your essbase server , and if you want to connect to it .Provide 'username' and 'password' ,which you have give after your essbase installation
So, conclusively, here we are dealing with 2 different sets of 'username' and 'passwords'
In step 1-> to connect to console , use 'admin' 'password'
In step 2-> to connect ot essbase server, use the credentials wchih you had given after installation of essbase server
Hope this clarifies you, as this is a lil confusion to many
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com

Not able to remove the BizTalk Application from Admin Console

While removing the application I am getting the below error and after that not able to see any Resources also for the same application.
TITLE: BizTalk Server 2009 Administration Console
Delete of ApplicationNode failed.
ADDITIONAL INFORMATION:
Error while removing application XXXXXX". (mscorlib)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2009&ProdVer=3.8.368.0&EvtSrc=Microsoft.BizTalk.ApplicationDeployment&EvtID=RemoveApplicationFailure
Method not found: 'Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer.GetBtsCatalogExplorerInstance()'. (mscorlib)

Hi,
the problem here is that your installation is effectively corrupt, in other words the combination of assemblies on the system does not match one of the supported configurations. I hope this is not a production system?
Having said that I think you have taken some repair steps?
The specific error here is that the administration console is not getting matched with the correct version of the dependent assembly. So your first step is find a working BizTalk dev system and determine what the correct versions are. The best way to do
this is to take advantage of the tools associated with the .net Fusion system. See here for a good description:
http://blogs.msdn.com/b/suzcook/archive/2003/05/29/57120.aspx. Also that post is a little old, if you have a .net 4 based system the locations need to be tweaked (but you don't in BTS
2009).
What it will allow you to do is obtain a trace of where .net looked for assemblies and where it found the one it used.
It should be trying to find: microsoft.biztalk.explorerom.dll. However it takes a bit of time to understand the logs so just because you see a few failures don't worry, you are interested in the one it found.
mark

Admin Console incorrect instance status and deployment timeout issues

Dear All
I am using weblogic 10.3.6 on two AIX, 3 instances on each and 2 instance are clustered. I found that when I start all instances, admin console will become unstable. Such as when starting 1 instance, will affect another started instance to be 'STARTING'.
https://www.dropbox.com/s/o225w9w74mzn33d/weblogic_admin.PNG
Also, when all instances are started, I could not complete deployment for EAR. Timeout will occur will activating change.
https://www.dropbox.com/s/rjhae9haw06926d/weblogic_timeout.PNG
Any idea ?
Many thanks
Chris

I assume the admin interface is running on the same machine as the server instance.
By default the Web Server instances use a directory in /tmp as a scratch/temp dir (something like /tmp/instance_name.hash/, e.g. /tmp/www.qweqwe.com-7f54fa82). One of the files stored there is the pid file. The pid file contains the pid of the running instance and is used by the admin interface (and the stop script, and the Admin agent I think) to keep track of which webservd "owns" which instance, etc. Unfortunately the /tmp directory is kept clean by the OS, and sometimes the OS daemon will remove the Web Server's directory and its associated files. When this happens the Web Server will (usually) continue working as though nothing were wrong, but the admin interface (and stop script, etc) will show that the instances are "Not Running."
For this reason one of the first things I do with a new Web Server instance is move its directory into the Web Server install location (something like /export/WS7/instance_name.hash/) and update the server.xml temp-path element to reflect the new location. Note that Web Server is very specific about how it wants the permissions set on this directory. It will report in its errors log if you get the permissions wrong.

My Admin Console doesn't work properly

I'm J2e novice. I've just installed J2EE bundle and noticed that something is wrong:
1) Whenever I start Admin Console for domain1 (default settings) it looks and works worse than Samples Server Admin Console. Compare the screenshots on http://astro.ia.uz.zgora.pl/~nirgal/problem/sas.htm
2) I can't undeploy any web application (the undeploy button inactive -> see screenshots) using the Admin Console whereas undeploying on Samples Server works properly.
3) In general there is many error messages at the bottom edge of Admine Console window during any session.
Greetings
Maciej

There are "Error on page" errors only (displayed on the bottom info bar in the window).
These are warnings I found in the server.log:
1) Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop. Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.
(I found no spaces in my PATH )
2) default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead
3) C:\Sun\AppServer\lib\install\applications\admingui\adminGUI_war\index_pl.html File Not Found
(I found index.html in this directory. When I checked the file name to index_pl.html it didn't help.)
Hello2 works properly, and there are no hello2 related errors. But I still can't undeploy it using Admin Console due to inactive 'Undeploy' button (I marked the hello2 checkbox).

In Admin Console We are unable to start Managed Server.

Hi,
We are using Weblogic 10.3.1.0 version.
Totaly 4 Managed Severs
1 Admin Server
with Nodemanger.
In Admin Console When ever we going to Stop the Manged Servers.
1. Environment ----- > Servers ---- > Control ----------- > Mananged Server 1 -----------> Force shutdown
2. Then click refresh button ---- showing "FAILED_NOT_RESTARTABLE"
3. after that when ever we going to start the Managed Server in Admin console
First its Showing ----- Starting
and next its showing ----- FAILED_NOT_RESTARTABLE
4. its not coming to Running State.
In Logs
Domain log
-----------> <1273141345460> <BEA-000450> <Socket 8 internal data record unavailable (probable closure due idle timeout), event received 17>
####<06-May-2010 11:54:40 o'clock BST> <Alert> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280738> <BEA-000396> <Server shutdown has been requested by weblogic>
####<06-May-2010 11:54:40 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280771> <BEA-000365> <Server state changed to FORCE_SUSPENDING>
####<06-May-2010 11:54:40 o'clock BST> <Notice> <Cluster> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280844> <BEA-000163> <Stopping "async" replication service>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143281061> <BEA-000365> <Server state changed to ADMIN>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143281064> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <Server> <ukirt156> <twpserver1> <DynamicListenThread[Default]> <<WLS Kernel>> <> <> <1273143281113> <BEA-002607> <Channel "Default" listening on 172.21.149.168:7003 was shutdown.>
####<06-May-2010 11:56:30 o'clock BST> <Error> <NodeManager> <ukirt156> <AdminServer> <[ACTIVE] ExecuteThread: '45' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1273143390016> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
AdminServer log
<06-May-2010 11:56:30 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
<06-May-2010 11:57:33 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
<06-May-2010 12:07:02 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
ManagedServer Log
<06-May-2010 11:54:40 o'clock BST> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by weblogic>
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler shutdown
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED shutting down.
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler pause
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED paused.
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler shutdown
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED shutdown complete.
<06-May-2010 11:54:54> <Debug> <NodeManager> <Waiting for the process to die: 19316>
<06-May-2010 11:54:54> <Info> <NodeManager> <Server was shut down normally>
<06-May-2010 11:54:54> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
NodeManager Log
<06-May-2010 11:54:54> <Info> <twp_domain> <twpserver1> <Server was shut down normally>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Boot identity properties saved to "/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Startup configuration properties saved to "/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/startup.properties">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Rotated server output log to "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out00020">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server error log also redirected to server log>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Starting WebLogic server with command line: /appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/bin/java -Dweblogic.Name=twpserver1 -Djava.security.policy=/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.management.server=http://ukirt156:7001 -Djava.library.path="/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/lib/i386/jrockit:/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/lib/i386:/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/../lib/i386::/appl/nsm/CA/UnicenterNSM/lib:/appl/nsm/CA/SharedComponents/JRE/1.4.2_09/lib/i386/client:/appl/nsm/CA/SharedComponents/JRE/1.4.2_09/lib/i386:/appl/nsm/CA/SharedComponents/ccs/dia/dna/lib:/appl/nsm/CA/SharedComponents/ccs/dia/lib:/usr/lib:/opt/CA/CAlib:/appl/nsm/CA/SharedComponents/lib:/appl/nsm/CA/SharedComponents/Csam/SockAdapter/lib:/appl/weblogic/oracle/middleware/wlserver_10.3/server/native/linux/i686:/appl/weblogic/oracle/middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/data/share/package/twp/WEB-INF/lib/ojdbc14.jar:/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.system.BootIdentityFile=/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xmanagement:port=7091,ssl=false,authenticate=false -Xms=1200m -Xmx=1200m -Xverbose:gc,gcpause -Dreflexis.scheduler=true -Dreflexis.server=twpserver1 -Djava.awt.headless=true -Dclient.encoding.override=UTF-8 -Doracle.jdbc.V8Compatible=true weblogic.Server >
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Working directory is "/appl/weblogic/scripts">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Rotated server output log to "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out00021">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server error log also redirected to server log>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
<06-May-2010 11:56:29> <Info> <twp_domain> <twpserver1> <Server failed during startup so will not be restarted>
<06-May-2010 11:56:29> <Warning> <Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:332)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:542)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:66)
at java.lang.Thread.run(Thread.java:619)
Server logs
<06-May-2010 12:06:57> <Info> <NodeManager> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
[INFO ][memory ] GC mode: Garbage collection optimized for throughput, initial strategy: Generational Parallel Mark & Sweep
[INFO ][memory ] heap size: 1228800K, maximal heap size: 1228800K, nursery size: 614400K
[INFO ][memory ] <s>-<end>: GC <before>K-><after>K (<heap>K), <pause> ms
[INFO ][memory ] <s/start> - start time of collection (seconds since jvm start)
[INFO ][memory ] <end> - end time of collection (seconds since jvm start)
[INFO ][memory ] <before> - memory used by objects before collection (KB)
[INFO ][memory ] <after> - memory used by objects after collection (KB)
[INFO ][memory ] <heap> - size of heap after collection (KB)
[INFO ][memory ] <pause> - total sum of pauses during collection (milliseconds)
[INFO ][memory ] run with -Xverbose:gcpause to see individual pauses
[JRockit] Management server started on port 7091, ssl=false, authenticate=false.
<06-May-2010 12:06:59 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.2-20_o-108500-1.6.0_05-20090120-1115-linux-ia32 from BEA Systems, Inc.>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xvFgPysVi5b89pYwaAppoqPXQ5wFVW13yoFhzhKmuQo= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the password attribute value of {AES}WSsjiXk6ppStq4WFajxaXkqCwpcBwaMJni7vk/pqXvk= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
Enter username to boot WebLogic server:<06-May-2010 12:07:00 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 >
<06-May-2010 12:07:01 o'clock BST> <Info> <Management> <BEA-141223> <The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.>
<06-May-2010 12:07:01 o'clock BST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:749)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:488)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<06-May-2010 12:07:01 o'clock BST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<06-May-2010 12:07:02> <Debug> <NodeManager> <Waiting for the process to die: 19443>
<06-May-2010 12:07:02> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<06-May-2010 12:07:02> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Note: if i start the manged servers through WLST scripts its working fine.
[twpuser@ukirt156 /appl/weblogic/scripts]$ java weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> nmConnect('weblogic', 'w3bl0g1c', 'ukirt156', '5556', 'twp_domain', '/appl/weblogic/oracle/middleware/user_projects/domains/twp_domain', 'plain')
Connecting to Node Manager ...
Successfully Connected to Node Manager.
wls:/nm/twp_domain> nmStart('twpserver1')
Starting server twpserver1 ...
Successfully started server twpserver1 ...
Please provide the solution, how to solve this issue.
Thanks
SRK

In my question some content was strike.... now again i updated...pls see now...
Server logs
<06-May-2010 12:06:57> <Info> <NodeManager> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
[INFO ][memory ] GC mode: Garbage collection optimized for throughput, initial strategy: Generational Parallel Mark & Sweep
[INFO ][memory ] heap size: 1228800K, maximal heap size: 1228800K, nursery size: 614400K
[INFO ][memory ] <s>-<end>: GC <before>K-><after>K (<heap>K), <pause> ms
[INFO ][memory ] <s/start> - start time of collection (seconds since jvm start)
[INFO ][memory ] <end> - end time of collection (seconds since jvm start)
[INFO ][memory ] <before> - memory used by objects before collection (KB)
[INFO ][memory ] <after> - memory used by objects after collection (KB)
[INFO ][memory ] <heap> - size of heap after collection (KB)
[INFO ][memory ] <pause> - total sum of pauses during collection (milliseconds)
[INFO ][memory ] run with -Xverbose:gcpause to see individual pauses
[JRockit] Management server started on port 7091, ssl=false, authenticate=false.
<06-May-2010 12:06:59 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.2-20_o-108500-1.6.0_05-20090120-1115-linux-ia32 from BEA Systems, Inc.>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xvFgPysVi5b89pYwaAppoqPXQ5wFVW13yoFhzhKmuQo= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the password attribute value of {AES}WSsjiXk6ppStq4WFajxaXkqCwpcBwaMJni7vk/pqXvk= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
Enter username to boot WebLogic server:<06-May-2010 12:07:00 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 >
<06-May-2010 12:07:01 o'clock BST> <Info> <Management> <BEA-141223> <The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.>
<06-May-2010 12:07:01 o'clock BST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:749)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:488)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<06-May-2010 12:07:01 o'clock BST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<06-May-2010 12:07:02> <Debug> <NodeManager> <Waiting for the process to die: 19443>
<06-May-2010 12:07:02> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<06-May-2010 12:07:02> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Note: if i start the manged servers through WLST scripts its working fine.
[twpuser@ukirt156 /appl/weblogic/scripts]$ java weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> nmConnect('weblogic', 'w3bl0g1c', 'ukirt156', '5556', 'twp_domain', '/appl/weblogic/oracle/middleware/user_projects/domains/twp_domain', 'plain')
Connecting to Node Manager ...
Successfully Connected to Node Manager.
wls:/nm/twp_domain> nmStart('twpserver1')
Starting server twpserver1 ...
Successfully started server twpserver1 ...
Please provide the solution, how to solve this issue.
Thanks
SRK

Weblogic 9.x admin console slowest and worst application ever

Does anyone else think the Weblogic 9.x admin console really sucks? Is there any place I can make improvement requests?
Things in Weblogic 8.x that took just a couple of minutes to accomplish routinely take a half-hour or more in the Weblogic 9.x console. I have recently discovered WLST and I have created a couple of scripts to script things I do quite often but quite honestly I don't have time to script everything I need to do in the console, especially since BEA should provide a usable admin console IMHO.
My specific complaints (not all inclusive as there is no way I could think of every annoyance I run into on a day to day basis):
1) It is crazy slow. We use the ssh node manager so every time it loads a page I guess it polls every managed instance via ssh and page loads take a couple of minutes. For example, getting the next page of Deployments takes around 3 minutes.
2) The deployment pagination is very annoying. Why is this limited to 10 deployments per page? This should just show me a list of all my deployments in alphabetical order. The pagination offers nothing. At the very least pagination length should be configurable. The pagination combined with problem 1 takes me many minutes to get to the app I need to do something with.
3) If BEA insists on pagination on the deployments list at least give me a link so I can immediately jump to a specific page! The link should have the letter range of the deployments on that page (like A-C, D-V, W-Z, or something like that).
4) After I stop an app it jumps back to page 1 instead of showing the page of deployments containing the app I just stopped. OMG!!! GRRR! Now I have to hit Next several times to get back to my app with 3 minutes between each page load. YOU HAVE GOT TO BE KIDDING ME!!!!
5) Why is there not a Redeploy button like there was in Weblogic 8.x? If I need to restart an application I have to go through the update procedure and not upload a new version. This is annoying, just give me a damn redeploy button.
6) After clicking the Lock button I have to wait 2-3 minutes for it to give me the Lock. Why does it take this long?
7) The whole locking mechanism is stupid. Why do I have to obtain a lock to make any changes? I never had a problem in Weblogic 8.x with walking on someone else. I can see how this could possibly be beneficial to some organizations (I suppose) so at the very least make obtaining the lock optional via configuration.
I am sure there are many more but I can't think of all of them now. I will start writing it down every time the console annoys the hell out of me. IMHO the Weblogic 9.x console broke the perfectly good Weblogic 8.x console.
It wouldn't be so annoying if it wasn't so MADDENINGLY SLOW.

We have upgraded our WebLogic from 8.1 to 9.2 along with our PeopleSoft 9.0 upgrade and boy-oh-boy, has the WebLogicAdmin console slowed down.
It used to open in about 10 seconds.
Now it opens in roughly 1 minute and 30 seconds.
The heap size settings are the same as they were in the WebLogic 8.1
Even restarting the WebLogicAdmin and associated PeopleSoft PIA's is the worst I have ever seen.
Windows 2003 SP3
Here's the startup command line;
-Xms256m -Xmx256m -XX:MaxPermSize=128m -classpath ";D:/psft/hr849\webserv\hdev\lib\ps_patch.jar;D:/psft/hr849\webserv\hdev\applications\peoplesoft\PSIGW\WEB-INF\lib\mail.jar;D:/psft/hr849\webserv\hdev\lib\portlet-api-1.0.jar;D:/psft/hr849\webserv\hdev\lib\pluto-1.0.1.jar;D:/psft/hr849\webserv\hdev\applications\peoplesoft\PORTAL\WEB-INF\lib\saaj.jar;D:/psft/hr849\webserv\hdev\applications\peoplesoft\PORTAL\WEB-INF\lib\xml-apis.jar;D:/psft/hr849\webserv\hdev\applications\peoplesoft\PORTAL\WEB-INF\lib\xercesImpl.jar;;d:\bea\patch_weblogic923\profiles\default\sys_manifest_classpath\weblogic_patch.jar;d:\bea\jdk150_12\lib\tools.jar;d:\bea\WEBLOG~1\server\lib\weblogic_sp.jar;d:\bea\WEBLOG~1\server\lib\weblogic.jar" -Djava.util.logging.config.file=D:\psft\hr849\webserv\hdev\applications\peoplesoft\logging.properties -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Dweblogic.Name=WebLogicAdmin -Dweblogic.management.username=operator -Dweblogic.ProductionModeEnabled=true -Dps_vault=D:\psft\hr849\webserv\hdev\psvault -Djava.security.policy="d:\bea\WEBLOG~1\server\lib\weblogic.policy" -Dssl.debug=false -Dps_home=D:/psft/hr849 weblogic.Server
Regards,
Tom

Admin Console Tasks not visible

Dear Experts,
We've installed BPC 7.5 NW version. Post the installation, we are trying to log in as system administrator to create a new application set based on default "Appshell". But the in the action pane no admin console tasks are appearing although administration for web is appearing. What can be the issue here? I have also performed the system diagnostics after running the same am getting an error "Cannot get Osoft Virtual Directory Object: Automation Error system cannot find the path specified".
Help on this matter is appreciated.

Hi Alok,
Thanks for your prompt answer. However, the problem is that the path drive:\WINDOWS\microsoft.net\Framework\v1.1.4322\Temporary ASP.NET Files\osoft\7ab1b945\cd624ca5\assembly\dl2\12adf122\0053d573_c606c701 doesnot exist. As in, under Temporary ASP.NET Files there is no folder called Osoft.
We have put the Antixsslibrary.dll under <system drive>:\Program Files\Microsoft Corporation\Anti-Cross Site Scripting Library V1.5\Library\.NET 1.1.
Also we have only Microsoft .NET framework 1.1.
Kindly let us know what can be the possible remedy.
One more thing, we have not installed BPC for Office client. Will that cause some issues??
Thanks in advance.
Edited by: Appu Del on Jun 20, 2011 3:35 PM

Admin defined roles in Web Admin

Looking to setup admin helpdesk rights in Web Admin so they can just Remove or Block devices under Mobility on a per user basis.
All I can find in the documentation is setting up additional Web Admins in the configengine.xml file.
Is there a way to give the limited rights?
Thx
Christa

Correct, you can add other admins, but there are no Role based
administration functions at this time, though I believe it is on the Road
map...
>>> On 3/5/2014 at 2:16 PM, in message
<[email protected]>,
laurabuckley<[email protected]> wrote:
> Hi Christa,
>
> I stand to be corrected on this, but as far as I know, access to the Web
> Admin console is an all or nothing story.
>
> I don't think that you can do graded authentication/roles based admin.
>
> Cheers,

Set Application Parameters link not activate under Web Admin Tasks of Admin

In the " How to do currency translation..." paper, there is a statement as following:
"The currency conversion business rules tables can also be activated by going through the web
admin parameters where the following parameter is set to u201C1u201D.
FXTRANS 1
However after I login to BPC Admin consol, I notice that Set Application Parameters link not activate under Web Admin Tasks of Admin Consol.
Where should do this? Should I do it under Set AppSet Parameters?

DFW,
In the non-web Admin Console, you should also be able to accomplish the same thing by going to the application, clicking "Modify application", then "Change application type", then "Modify Application", then choosing the "Currency Conversion" application option.
In general, this is how business rules can be turned on without messing around in the application parameters, and should really be the preferred method unless you have done some kind of customization that an application modification will interfere with.
Ethan

Tuxedo 12c r2 how to open admin console

Hai Mates,
I have installed oracle tuxedo 12c r2 but not able to start the admin console,if any one knows please inform.
thanks
Gautam.A

Hi Gautam,
If you are referring to old Tuxedo web admin console, I'm not sure what shape it is in as it has been effectively replaced by TSAM Plus. Few if any customers were using the web admin console and it had fallen behind in terms of more recent Tuxedo features. Most Tuxedo customers simply use the command line tools. Is there something specific you were looking for in what the web admin console provided?
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Error in creating a new user in j2ee 14 admin console

Hi,
I am getting the following error while trying to create a new user using the j2ee 1.4 admin console.:
A "com.sun.enterprise.tools.guiframework.exception.FrameworkError" was caught. The message from the exception: "Unable to get View for ViewDescriptor 'fileUsers'"
The root cause is "java.lang.ArrayIndexOutOfBoundsException: 0"
Plz proide me with solutions
Regads,
Tanmoy

This problem wil happen only if you've created a user with an empty group id, and this issue is fixed for FCS .
You have two workarounds to use adminGUI for managing users:
1. Use CLI, and create a group id to this user, then you can use adminGUI.
2. Other option is remove the empty group id user from domain.xml, and then you can come back to adminGUI to create the user with some group id. I prefer the 1st option.

The WRT160N's Web Admin Console Keeps Becoming Unaccessible

Similar Messages

Maybe you are looking for