The year 1942 is MISSING!

This is an odd bug. With the calendar in view year mode if I scroll back to the 1940s I find that the year 1942 is missing entirely! 1941 is there, 1943 is there but no 1942! Also, years prior to 1941 have no December and the year header is missing.
I've seen this with iOS 7.0.2 and 7.0.3 on iPhone 4S, 5, 5C, and 5S.

Interesting. I have a similar thing on my iPad, however 1942 is there. The issue is with 1922. 1921 is there, and 1923 is there, but no 1922.
Anything before 1921 has no year label, and no month of December.
Odd.
1920 apparently ends in August, and 1921 starts in December, but has no Month of January.
on my iPhone it also glitches out in 1921, though this time 1920 ends in September, and 1921 has 2 of the first three months. 2 feb, 2 march 2 apr.

Similar Messages

HT203167 A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps. Where is it and how do I find it? I believe I originally purchased the film on my 1st Gen AppleTV.

A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps. Where is it and how do I find it? I believe I originally purchased the film on my 1st Gen AppleTV...other movies show up. Help.

It was Love Actually. It's been in my library a few years but is now missing. It's odd...it isn't even in the iTunes Store anymore. I think there is a rights issue because a message appeared in the store saying it wasn't available at this time in the U. S. store. Still, if I bought it years ago it should be in my library or I should get a refund....

(!) How to locate the original file for missing songs?

song could not be used because original file could not be found. Would you like to locate?
I got this message when I last tried to synch my ipod. The message said there were 100 files which could not be found.   Actually more than 100 songs show the exclamation mark that says the file can not be found.
Previous posts on this issue suggest the underlying file has been changed or moved out from the ITunes organisation. Well the last time I synched my ipod on Lion a few days ago it was fine. On Sunday I wiped my hard drive, carried out the upgrade to Mountain Lion as a clean install, and used Migration Assistant to bring my user data over. After that I ran cclean and disk utility permissions and disk verification. Then this happened.
I migrated my iTunes Library to an external hard drive six months ago. That was disconnected during the upgrade so I am not sure why the files can’t be found now.    Anyway, I want to recover the missing files . I could not find them by name, album or artist on the external drive. So I thought I would find them in Time Machine backup #1. I couldn’t!. Nor could I find missing songs on my alternate Time Machine backup #2. Both Time Machine backups are set to include the external drive. Songs recognised in iTunes are visible in the backups, but not the ones that are missing.
I have a third backup volume which was a clone of the Lion setup before I did the upgrade, but I can’t access this or Mac for a few days.
I did have some permissions failures after the 10.7.4 upgrade which resulted in creating 2 new standard user accounts. Maybe I’v e got some files across these users? But in that case I’d have seen problems before the upgrade?   I notice a fair number of these are compilations imported from CD about 4 years ago. Bu tnot all.
(1). Is there a smart way to list all the files that are missing?
I can scroll through all of ITunes Music to see where there are exclamation marks. I’d like to only list these missing songs.
(2). How can I locate the missing media files?
- a search on Name / Album / Artist hasn’t found them in live drives or on TM backups. I’ve still got the missing songs on my iPod, however.
Once I can answer these questions with your help I’ll know what would be the best way to try to recover, and to work out what went wrong. I’m shocked that I can’t find them in backup.   Eventually I can restore audio from original source. If they were photos that went missing from library and backups then I would have no way to get back!
(3) could this happen in iPhoto? (shiver)

Thanks for taking the time to look at my problem. Shared is empty and I didn't back it up - I only transferred the standard and Admin users to the clean install of Mountain Lion.
But I got some valuable insight into how the iTunes library is set up from your article on split Libraries. I'd like to see it in the Tips for iTunes for Mac.   My Itunes library was set up in pre-Itunes 8 structure, and as I'd moved it to an external drive it didn't get migrated to the new structure in recent upgrades, perhaps?
I found your article extremely useful : https://discussions.apple.com/docs/DOC-3991. That gave me the means to restore the missing files more quickly than getting the original CDs out and re-importing them to iTunes.
So I've now restored the missing files and started the backups rolling ....
I still don't understand how they went missing. However the best backup was the Ipod itself.

Remove age from birthday notification: I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate. How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!

I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate.
How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!?
Thanks
Tim

Where do you see the default birthday showing as Nov. 30? If you can explain that, I can probably modify the below script to do that clean up.
In response to the original problem:
I'm not sure why I missed the original reply, but here is an Applescript that will change all the years of any selected contacts to 1604 (default for no year).
tell application "Contacts"
          set thePeople to selection
          repeat with aPerson in thePeople
                    set theDate to birth date of aPerson
                    if theDate is not missing value then
                              set the year of theDate to 1604
                              set birth date of aPerson to theDate
                    end if
          end repeat
end tell
copy and paste it into a new Applescript Editor document. Select all the contacts you want to change (in Contacts), then run this script by clicking on the green Run button in Applescript Editor.

Commitment Carry Forward in the year end closing!

Hi All,
We have a lot of open PRs and POs against Internal orders and WBS at the year end and we also have the budget control activated. Now we are going to do the year end closing. My question is:
1. Who should do the commitment carry forward, supply chain or FI team?
2. If supply chain will do the PR or PO carry forward, will FI team also need to run the commitment carry forward (KOCF or CJCF) from FI side at the same time or not necessary?
Thanks,
Ting

Hi Abhinay,
Thanks for the answer.
When you say they have to perform year end activities like checking PO and PR, what actually they are doing? Do they just need to check whether those PO or PR are required (if not, close them) or they need to do something more? . As far as I know, no steps like checking PO and PR are required here. So I am wondering whether we have missed anything or not. Can you give me some details about that step?
Also, if we are using only Total value for the budget, not annual value, I don't need to do the budget carry forward closing step. In this case, do I need to do the commitment carryforward step?
Thanks,
Ting

What are the year end and month end activities carried in FI?

Hi all,
I am new to FI, what is the steps or the activites/process to be carried out during the month end as well as the year end activities for FI.
Can anyone explain me about it and does sap provide any standard documentation on year end / month end activities.
Thanks
Pooja

Hi Pooja,
Please find the details below
Month end closing Activities
1. All the expenses including amortization, prepaid expenses, Preliminary expenses and accruals have been booked.
2. Complete Bank Reconciliation (T. Code: FF67)
3. Make sure that Sum of Inter Company balances is Zero
4. Suspense Accounts should be cleared regularly.
5. Ensure that all documents related to MM & SD have been entered in system. (T.Code:F-22 & F-43) 6. Ensure that all billing documents are released to accounting.
7. Calculate Overheads on all process Orders (CO43)
8. Technically complete all process orders which are fully processed (CORM).
9. Calculate Variance (KKS1)à (Relevant only if Standard cost is calculated).
10. Settle all process orders which are technically complete (CO88).
11. Close All settled Process Orders
12. Close MM period (Transaction Code: MMPV).
13. Carry out GR/IR clearing (F.13) transaction
14. Depreciation Run (AFAB) has been carried out for the month
15. Close FI Posting period after the month end closing activity is over (T.Code:OB52) Year end
Closing Activities:
1. Calculate production work in progress on process orders which are not technically complete. (CO88).
2. Carry out Assessment cycle for Cost Centers (T. Code: KSUB)
3. All month end closing Activities should be carried out.
4. Carry Forward Balances to next year With TC: F.16 we can carry forward the balance to next year. With TC: OBH2 copy the number ranges to next year Open next year periods by selecting the Posting Period Variant. then test by posting the transaction in F-02)
SAP FI Month End and Year End Activities
1 - Maintain Activity prices - KP26
2 - Release of Standard Cost Estimate - CK40N
3 - MM period close and open - MMPV
4 - FI period open
5 - Parked documents to be posted - FBV0, MIRO
6 - Reposting of Inter Office CC - KB61
7 - Bank Reconciliation
8 - Update Section Code where missing - J1INPP
9 - Maintain GRIR clearing - F.13
10 - Provision for current month - FB50
11 - Depreciation entry - FB50
12 - Exchange rate - To be Updated
13 - Revaluation of foreign currency open items - F.05
14 - Recognition of Inventory at Bonded warehouse - FB50
15 - Maintain Statistical Key Figures - KB31N/KP46
16 - Variance Calculation of Process Orders - KKS1
17 - Settlement of variances - CO88
18 - Assessment cycles - Aux/WH CC to Main CC - KSU5
19 - Assessment cycles - Functional CC to SBU CC - KSU5
20 - Assessment cycles - SBU CC to COPA - KEU5
21 - Profit Center Reposting - 9KE0
22 - Balance Sheet Adjustment calculation - F.5D
23 - Transfer Profit Center to AR & AP - 1KEK
24 - Transfer Inventory to PCA - 1KEH
25 - Assessment Cycle - Dummy PC to SBU PC - 3KE5
26 - Check for u201CDelivery made, not Invoicedu201D - VF03
27 - Match GL and PCA - KE5T
28 - Match PCA and PA
29 - Top Down Distribution in COPA - KE28
30 - Reclassification of GL balances
31 - Balance Carry forward (Year End Only) - F.16
32 - PCA Balance Carry forward (Year End Only) - 2KES
33 - Transfer to FI - 1KE8
Regards,
JA

Depreciation for the year to be posted halfly

Hi Guys
In my implementation we have a scenrio, the depreciation for a particular depreciation area has to be done halfly i.e. only on period 06 & 12
I have done necessary configure for the weightage and for the relevant depreciation area
OAYL - i have clicked the check box for the relveant depreciation area
OA85 - i have given the weightage for the period 06 & 12 as 50% and for all the other period as 0
But when i run the depreciation AFAB - the deprecation is getting posted from the very first period
Did i missed any config guys
Thanks in advance
Warm Regards
Bala

Hi Bala,
When I look to your example you can use a nomal depreciation key like LINR. In the asset you have to say start at the middle of a year. Like on 01-07-XXXX.
In the period control from your depreciation key you can use start at the middle of the year. When the fiscal year is not the same as the calendar year you have to define that in the period controls.
When you create a posting then the depreciation keys looks to the period controle table and fill in automtatecly depreciation start date.
When this is in all the years you have to say
years month
0          6         0%
1                     50%
1          6         0%
2                     50%
It is then important that the depreciation start date is the first day of the fiscal year.
For tessting this you can better use the esset exploirer. There you can see the planed values by month for this year and the years tottals for the other year.
Paul

Re: DW CC The usual choices for the Workspace Layout are missing. How can I restore them?

The usual choices for the Workspace Layout are missing. How can I restore them?The usual choices for the Workspace Layout are missing. How can I restore them?

The Insert panel has been reworked pretty significantly in DWCC (Spry has been dead for over a year now, so it no longer appears for instance), but can still be opened via Window > Insert then dragged to the toolbar location (to get the tabs back) by clicking and dragging the Insert tab up to the top of the application frame until it highlights. Once you drop it, it will then appear as a toolbar.
Not all of the tools will be visible at all times. DWCC knows when certain things can't technically be used and it won't display them if they can't be inserted.
EDIT: Oops, forgot to add this. Here is a link talking about what has changed in the Insert panel: http://helpx.adobe.com/dreamweaver/using/changes-insert-options-creative-cloud.html

When I updated by iphone with IOS7, my calendar entries did not follow the icloud. I am only showing pre set calendar entries for the year?

When I updated by iphone with IOS7, my calendar entries did not follow the icloud. I am only showing pre set calendar entries for the year and lost all other calendar entrie and it will not take any new entries. They show up in my outlook, but not on my iphone, which they did before I updated my software to the new i0s7

Before syncing, select each calendar on your Mac and back it up by going to File>Export>Export. If anything goes missing, you can use these to restore your calendars.
Have you tried simply force closing the calendar app on your iPhone? To do this, double-tap the home button, locate the calendar app, then swipe up on the image above the app icloud to close it and tap the home bottom. Then test your calendar again.

Roxio Media error "the certificate file is missing or has been corrupted."

Hi, ive had my blackberry since earlier this year. I am now getting an error message when i try to open up media manager. I am getting an error which states: "the certificate file is missing or has been corrupted." can someone help me figure this one out???? Thanks

Hi and welcome to the forums!
See if this helps!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01035760&lc=en&cc=us&dlc=&product=3435326
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Few days ago my Firefox work properly & perfect. After the last update I miss my history and convinient addons. Please HELP : (

Hi,
Few days ago Mozila stop work (I don't remember before or after last update) and ask me something. I answered responsibly, but the result is a hilarious and tragic, as follow:
1/ No bookmarks: They are very important for me because I prepare them from years. I often mark the important sites with "CTRL+D" and by inserting few key words.
2/ No history
3/ Under the tabs, on left side, there was 2 arrows in circle: TO Left and TO Right. With them was very comfortably to navigate. Now there is only 1 arrow: TO LEFT
4/ Under the tabs, on right side is field "Search using Firefox Add-ons". Few days ago was very useful to write some word and Mozilla automatically search for sites that meet the written words by GOOGLE. Now this feature is gone.
Are they any opportunity to restore my previous settings ?
Thank you for cooperation !
Best regards,
Rumen Ivanov

Hello,
Firefox automatically creates backups of your bookmarks, which can be helpful if your bookmarks are lost or missing. To recover them, follow the instructions below.
#Use <u>one</u> of these methods to open the Bookmarks Library window:
#*Click the ''[[Display the Firefox button menu instead of the menu toolbar|Firefox button]]'' to open the menu and click on ''Bookmarks''.
#*Click the ''Bookmarks'' menu and click on ''Show All Bookmarks''.
# At the top of the Library window, click the "Import and Backup" menu and select Restore.
# Click the date of the bookmark backup you want to recover.
# In the new window that appears, click OK.
# Your bookmarks from the selected date should now be restored.
For more information, see the [[Restore bookmarks from backup or move them to another computer]] article. For other solutions, see the [[Recover lost or missing Bookmarks]] article.
Did this fix your problems? Please report back to us!
Thank you.

Problem in getting exact week of the year (Reposted)

Hi,
Can somebody respond to my posting please. I am posting it second time since nobody replied me till yet.
I make use of below code to get exact week of the year.
// Assumes the provided date is in 'ddMMM' format
SimpleDateFormat sdf = new SimpleDateFormat ( "ddMMM" );
Date parsedDate = sdf.parse( dateString );
Calendar calendar = Calendar.getInstance();
calendar.setTime( parsedDate );
int week = calendar.get( Calendar.WEEK_OF_YEAR );
Problem which I am facing is that when I pass "dateString" as
"22Mar" then it gives week as 13 instead of 12 for year 2007.
I find out that making use of cal.setFirstDayOfWeek( Calendar.MONDAY ); and cal.setMinimalDaysInFirstWeek( 4 ); statement eradicates the problem, ideally values should be
cal.setFirstDayOfWeek( Calendar.SUNDAY); and cal.setMinimalDaysInFirstWeek( 7); because for US first day of the week should be SUNDAY and minimum number of days should be 7 when I start from Sunday.
Please help me to understand the resolution. Is it correct or not?
Is it possible to solve the problem without specifying cal.setFirstDayOfWeek( Calendar.MONDAY ); and cal.setMinimalDaysInFirstWeek( 4 ).
This seems to be hardcoded for each year.

What am I missing? If you can't accept the ISO rules then you are going to define and implement your own algorithm. UsingSimpleDateFormat sdf = new SimpleDateFormat( "yyyy/MM/dd" );
        Date parsedDate = sdf.parse( "2007/01/01" );
        Calendar calendar = Calendar.getInstance();
        calendar.setFirstDayOfWeek(Calendar.MONDAY);
        calendar.setTime( parsedDate );
        for (int count = 0; count < 366; count++)
            int week = calendar.get( Calendar.WEEK_OF_YEAR );
            System.out.println(week + "\t" + sdf.format(calendar.getTime()));
            calendar.add(Calendar.DAY_OF_YEAR, 1);
        }I get the week as 12 not 13 but I specified THIS year. If you don't specify a year then, quite rightly, it takes 1970.

Problem in getting exact week of the year

Hi,
I have make of use of below code to get exact week of the year.
Now problem which I am facing is that when I pass "dateString" as
"22Mar" then it gives week as 13 instead of 12 for year 2007.
// Assumes the provided date is in 'ddMMM' format
SimpleDateFormat sdf = new SimpleDateFormat ( "ddMMM" );
Date parsedDate = sdf.parse( dateString );
Calendar calendar = Calendar.getInstance();
calendar.setTime( parsedDate );
int week = calendar.get( Calendar.WEEK_OF_YEAR );
I find out that making use of cal.setFirstDayOfWeek( Calendar.MONDAY ); and cal.setMinimalDaysInFirstWeek( 4 ); statement eradicates the problem, ideally values should be
cal.setFirstDayOfWeek( Calendar.SUNDAY); and cal.setMinimalDaysInFirstWeek( 7); because for US first day of the week should be SUNDAY and minimum number of days should be 7 when I start from Sunday.
Please help me out to understand the resolution. Is it correct or not?
Is it possible to solve the problem without specifying cal.setFirstDayOfWeek( Calendar.MONDAY ); and cal.setMinimalDaysInFirstWeek( 4 ). This seems to be hardcoded for each year.
Thanks in advance...

What am I missing? If you can't accept the ISO rules then you are going to define and implement your own algorithm. UsingSimpleDateFormat sdf = new SimpleDateFormat( "yyyy/MM/dd" );
        Date parsedDate = sdf.parse( "2007/01/01" );
        Calendar calendar = Calendar.getInstance();
        calendar.setFirstDayOfWeek(Calendar.MONDAY);
        calendar.setTime( parsedDate );
        for (int count = 0; count < 366; count++)
            int week = calendar.get( Calendar.WEEK_OF_YEAR );
            System.out.println(week + "\t" + sdf.format(calendar.getTime()));
            calendar.add(Calendar.DAY_OF_YEAR, 1);
        }I get the week as 12 not 13 but I specified THIS year. If you don't specify a year then, quite rightly, it takes 1970.

Mail.app can't encrypt after the turn of the year

At the turn of the year the Apple Mail.app (1.3.x) lost the built-in ability to sign and encrypt messages. The built-in verification and decryption works fine, but the both required buttons for signing and encryption are still missing.
The Certificates of myself, my partners and the CA are valid. My Communication-Partners which use the Mail.app confirmed that problem and the Thunderbird-Users are not affected.
Any Ideas, Comments or further Confirmations.

This Post affects Panther-Users, so i asked it again at this place:
http://discussions.apple.com/thread.jspa?threadID=306095

How can I print just the year view in iCal?

Just trying to print the year view.

If you choose the "list" option in View on the print dialog box and uncheck everything at the bottom except "To do items" you may be able to get what you're looking for. It appears that the list includes all todos including those without due dates, so you might have to do something to assign due dates to all your todos and in iCal preferences restrict the visibility of todos outside of a certain date range. Unfortunately, you can't save any of this work into a standard report (at least not that I know of) - the print dialog in iCal starts from scratch every time you invoke it. Hope that helps at least some.

The year 1942 is MISSING!

Similar Messages

Maybe you are looking for