"theme" icon
My friend updated his n95-1's software to v20... And i notice the theme icon in the main menu doesn't exist anymore. Is it normal for v20...?
I know it's not much of a problem, just curious.
I'm not sure if I fully understand what you're trying to do .. but instead of your code looping over the gridview I normally add my control in the ItemTemplate itself and it will get called for each row in the grid. The event you decide to run your code in is still up to you.
Have you tried just naming the icons with the same name in your theme folder? WebTools supports a dynamic image lookup so for example if there is an image "add.gif" that is currently in the assets/common/buttons folder, if you create your own image called add.gif and place it in your theme folder, WebTools should use this one automatically. This works in some places .. but I'm not sure if it is missing from some pages.
Similar Messages
-
ok...people please bear with me as i am new to the mac world. i went to my local electronics store that is an apple distributor and i came across one of their mac mini's but the strange thing is that the desktop was different and the icons especially the dock toolbar icons. i was wondering of any cool desktop themes/icons i can apply to my mac mini and step by step on how to do it. i came across some desktop themes but do not know how to apply them to my desktop. any help is greatly appreciated...thanks
To change the picture in your desktop click on the apple menu and select system preferences - desktop & screensaver - click the desktop tab and choose the picture you want to display from the desktop pictures file. Alternatively you can display pictures from the other files displayed.
If you want to tinker with your dock go back to system preferences and select dock to set it the way you want. Then there's also the apearance you can change - again from system preferences.
Additionally you can change icons by selecting the folder/file and get info (apple&I or use the file menu) then just paste the new picture over the top of the icon you want to change)
Hope this helps
Pos I've just seen that link you've found! Wow just what I've been searching for! Fabtastic! -
Thinkpad theme icons - where to download?
Hi I just did a clean install of my T400's Windows vista to a fresh Windows 7. I got all the usual drivers and such from Lenovo such as system update etc. I was wondering where I can download the thinkpad theme/icons that I loved so much from the vista. (e.g. the My computer, rubbish bin icons etc). I found some links from dodgy sites which I dont want to trust. Is there an official link somewhere direct from Lenovo? Cheers
I never made recovery discs. I just backed up the Recovery partition. The two VHD's are all you really need; one is the usual System Reserved drive, the other is the usual C drive. Not sure how it works with recovery discs, though.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
[solved] XFCE Dual monitor causes theme & icon, xconf issues
Hey all,
Here is the issue:
I have sony svz13114gxx laptop with xfce4 DE, i just tried to hook up external vga monitor to laptop and everything configures right (no mirroring) with this run in normal session:
xrandr --output eDP1 --mode 1920x1080
xrandr --newmode "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync
xrandr --addmode VGA1 1920x1200_60.00
xrandr --output VGA1 --mode 1920x1200_60.00
xrandr --output VGA1 --left-of eDP1
Obviously when i reboot this is not persistent, so then i put this stuff in my /etc/X11/xorg.conf.d/20-intel.conf:
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
Option "monitor-eDP1" "eDP1"
Option "monitor-VGA1" "VGA1"
EndSection
Section "Monitor"
Identifier "VGA1"
Modeline "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -HSync +VSync
Option "PreferredMode" "1920x1200_60.00"
EndSection
Section "Monitor"
Identifier "eDP1"
Option "PreferredMode" "1920x1080"
Option "Primary" "true"
Option "Position" "1920 0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Graphics"
Monitor "eDP1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
This is where the problems start. On reboot Slim desktop manager seems to be stretched properly across the two monitors, but the I login and the display switches back to being mirrored, my xfce gtk2 theme is disabled in favor of somee default looking one, my icons are back to default, and none of my custom keyboard shorcuts work.
I can then use xrandr to get the displays in extended mode again, but the themes and icons etc do not revert. And on reboot, i have the same issue.
I have tried the sourcing ~/.xprofile, ~/.xinitrc, and ~/.config.xfce4/xinitrc routes, putting the xrandr cammands above the exec lines and that doesn't even enable VGA1.
I have been to all these places
https://wiki.ubuntu.com/X/Config/Resolution#Xrandr_Graphical_Front_End_GUI
http://ilkinbalkanay.blogspot.com/2008/01/extended-desktop-configuration-with.html
https://bbs.archlinux.org/viewtopic.php?id=98747
https://www.google.com/search?q=arch%20xrandr&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np
https://wiki.archlinux.org/index.php/Execute_commands_after_X_start
http://intellinuxgraphics.org/dualhead.html
http://mac.linux.be/content/setting-xorgconf-manually-xrandr#3
https://www.google.com/search?q=arch%20dual%20monitors%20The%20last%20active%20output%20must%20not%20be%20disabled%2C%20the%20system%20would%20be%20unusable.&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np#hl=en&safe=off&client=firefox-a&tbo=d&rls=org.mozilla:en-US%3Aofficial&channel=np&sclient=psy-ab&q=xfce+%22Selected+output+not+disabled%22&oq=xfce+%22Selected+output+not+disabled%22&gs_l=serp.3...1694.1694.3.2205.1.1.0.0.0.0.97.97.1.1.0.les%3Bcrnk_timediscounta..0.0...1c.1.O4EDj7DaWlA&pbx=1&fp=1&bpcl=39468505&biw=984&bih=936&cad=b&sei=aKC_UIKvJ6GA0AGTg4HwBg&sei=FKS_UMuwJdPU0gHorICQBA&bav=on.2,or.r_gc.r_pw.r_qf.&sei=2MK_UOaAJ5Ph0wGbsoHICg
https://wiki.archlinux.org/index.php/Xfce#Customizing_Startup_Applications
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html
https://wiki.archlinux.org/index.php/Xorg#Monitor_settings
Even after much research, still no luck.
this might be useful:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631225
Anyone have any ideas?
here is my Xorg0.log
[ 3.490]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 3.490] X Protocol Version 11, Revision 0
[ 3.490] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 3.490] Current Operating System: Linux tcz 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012 x86_64
[ 3.490] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d23251af-35fa-426b-a7d5-5aa2f0a5b87d ro quiet pcie_aspm=force i915.i915_enable_rc6=1
[ 3.490] Build Date: 08 November 2012 07:09:29PM
[ 3.490]
[ 3.490] Current version of pixman: 0.28.0
[ 3.490] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.490] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.490] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 5 16:25:21 2012
[ 3.492] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.494] (==) No Layout section. Using the first Screen section.
[ 3.494] (**) |-->Screen "Default Screen" (0)
[ 3.494] (**) | |-->Monitor "eDP1"
[ 3.494] (**) | |-->Device "Intel Graphics"
[ 3.494] (==) Automatically adding devices
[ 3.494] (==) Automatically enabling devices
[ 3.494] (==) Automatically adding GPU devices
[ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.504] Entry deleted from font path.
[ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.504] Entry deleted from font path.
[ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.504] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 3.504] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.504] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.504] (II) Loader magic: 0x7fcc40
[ 3.504] (II) Module ABI versions:
[ 3.504] X.Org ANSI C Emulation: 0.4
[ 3.504] X.Org Video Driver: 13.1
[ 3.504] X.Org XInput driver : 18.0
[ 3.504] X.Org Server Extension : 7.0
[ 3.505] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.276] (--) PCI:*(0:0:2:0) 8086:0166:104d:90a5 rev 9, Mem @ 0xd7000000/4194304, 0xc0000000/268435456, I/O @ 0x00009000/64
[ 6.276] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.276] Initializing built-in extension Generic Event Extension
[ 6.276] Initializing built-in extension SHAPE
[ 6.276] Initializing built-in extension MIT-SHM
[ 6.276] Initializing built-in extension XInputExtension
[ 6.276] Initializing built-in extension XTEST
[ 6.276] Initializing built-in extension BIG-REQUESTS
[ 6.276] Initializing built-in extension SYNC
[ 6.276] Initializing built-in extension XKEYBOARD
[ 6.276] Initializing built-in extension XC-MISC
[ 6.276] Initializing built-in extension SECURITY
[ 6.276] Initializing built-in extension XINERAMA
[ 6.276] Initializing built-in extension XFIXES
[ 6.276] Initializing built-in extension RENDER
[ 6.276] Initializing built-in extension RANDR
[ 6.276] Initializing built-in extension COMPOSITE
[ 6.276] Initializing built-in extension DAMAGE
[ 6.276] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.276] Initializing built-in extension DOUBLE-BUFFER
[ 6.276] Initializing built-in extension RECORD
[ 6.276] Initializing built-in extension DPMS
[ 6.276] Initializing built-in extension X-Resource
[ 6.276] Initializing built-in extension XVideo
[ 6.276] Initializing built-in extension XVideo-MotionCompensation
[ 6.276] Initializing built-in extension XFree86-VidModeExtension
[ 6.276] Initializing built-in extension XFree86-DGA
[ 6.276] Initializing built-in extension XFree86-DRI
[ 6.276] Initializing built-in extension DRI2
[ 6.276] (II) LoadModule: "glx"
[ 6.278] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.281] (II) Module glx: vendor="X.Org Foundation"
[ 6.281] compiled for 1.13.0, module version = 1.0.0
[ 6.281] ABI class: X.Org Server Extension, version 7.0
[ 6.281] (==) AIGLX enabled
[ 6.281] Loading extension GLX
[ 6.281] (II) LoadModule: "intel"
[ 6.281] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 6.285] (II) Module intel: vendor="X.Org Foundation"
[ 6.285] compiled for 1.13.0.901, module version = 2.20.14
[ 6.285] Module class: X.Org Video Driver
[ 6.285] ABI class: X.Org Video Driver, version 13.1
[ 6.285] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 6.286] (++) using VT number 7
[ 6.288] (II) intel(0): using device path '/dev/dri/card0'
[ 6.288] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 6.288] (==) intel(0): RGB weight 888
[ 6.288] (==) intel(0): Default visual is TrueColor
[ 6.288] (**) intel(0): Option "AccelMethod" "sna"
[ 6.288] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 6.289] (**) intel(0): Framebuffer tiled
[ 6.289] (**) intel(0): Pixmaps tiled
[ 6.289] (**) intel(0): 3D buffers tiled
[ 6.289] (**) intel(0): Throttling enabled
[ 6.289] (**) intel(0): Delayed flush enabled
[ 6.289] (**) intel(0): "Tear free" disabled
[ 6.289] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 6.289] (II) intel(0): Output eDP1 using monitor section eDP1
[ 6.289] (**) intel(0): Option "PreferredMode" "1920x1080"
[ 6.289] (**) intel(0): Option "Position" "1920 0"
[ 6.289] (**) intel(0): Option "Primary" "true"
[ 6.289] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 6.293] (II) intel(0): Output VGA1 using monitor section VGA1
[ 6.293] (**) intel(0): Option "PreferredMode" "1920x1200_60.00"
[ 6.294] (II) intel(0): Output HDMI1 has no monitor section
[ 6.336] (II) intel(0): Output DP1 has no monitor section
[ 6.337] (II) intel(0): EDID for output eDP1
[ 6.337] (II) intel(0): Manufacturer: MS_ Model: 25 Serial#: 16843009
[ 6.337] (II) intel(0): Year: 2012 Week: 24
[ 6.337] (II) intel(0): EDID Version: 1.4
[ 6.337] (II) intel(0): Digital Display Input
[ 6.337] (II) intel(0): 8 bits per channel
[ 6.337] (II) intel(0): Digital interface is DisplayPort
[ 6.337] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 6.337] (II) intel(0): Gamma: 2.20
[ 6.337] (II) intel(0): No DPMS capabilities specified
[ 6.337] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 6.337] (II) intel(0): First detailed timing is preferred mode
[ 6.337] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 6.337] (II) intel(0): redX: 0.602 redY: 0.336 greenX: 0.296 greenY: 0.546
[ 6.337] (II) intel(0): blueX: 0.148 blueY: 0.126 whiteX: 0.313 whiteY: 0.329
[ 6.337] (II) intel(0): Manufacturer's mask: 0
[ 6.337] (II) intel(0): Supported standard timings:
[ 6.337] (II) intel(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 6.337] (II) intel(0): Supported detailed timing:
[ 6.337] (II) intel(0): clock: 162.8 MHz Image Size: 291 x 164 mm
[ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2481 h_border: 0
[ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 6.337] (II) intel(0): Supported detailed timing:
[ 6.337] (II) intel(0): clock: 99.9 MHz Image Size: 291 x 164 mm
[ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2281 h_border: 0
[ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 6.337] (II) intel(0): Monitor name: Sony LCD
[ 6.337] (II) intel(0): Ranges: V min: 39 V max: 61 Hz, H min: 43 H max: 66 kHz, PixClock max 175 MHz
[ 6.337] (II) intel(0): EDID (in hex):
[ 6.337] (II) intel(0): 00ffffffffffff00367f250001010101
[ 6.337] (II) intel(0): 18160104a51d1078020f159a564b8b26
[ 6.337] (II) intel(0): 205054000000d1c00101010101010101
[ 6.337] (II) intel(0): 0101010101019c3f803172380f402020
[ 6.337] (II) intel(0): 330023a4100000180727806971380f40
[ 6.337] (II) intel(0): 2020330023a410000018000000fc0053
[ 6.337] (II) intel(0): 6f6e79204c43440a20202020000000fd
[ 6.337] (II) intel(0): 00273d2b4211000a2020202020200013
[ 6.337] (II) intel(0): EDID vendor "MS_", prod id 37
[ 6.337] (II) intel(0): Using EDID range info for horizontal sync
[ 6.337] (II) intel(0): Using EDID range info for vertical refresh
[ 6.337] (II) intel(0): Printing DDC gathered Modelines:
[ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 6.337] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 6.337] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 6.337] (II) intel(0): Printing probed modes for output eDP1
[ 6.337] (II) intel(0): Modeline "1920x1080"x59.9 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz UeP)
[ 6.337] (II) intel(0): Modeline "1920x1080"x40.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 6.338] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 6.338] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 6.338] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 6.338] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.338] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.338] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 6.338] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 6.338] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.338] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 6.338] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 6.338] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 6.343] (II) intel(0): EDID for output VGA1
[ 6.343] (II) intel(0): Printing probed modes for output VGA1
[ 6.343] (II) intel(0): Modeline "1920x1200_60.00"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz UP)
[ 6.343] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.344] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.344] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.344] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 6.344] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 6.344] (II) intel(0): EDID for output HDMI1
[ 6.386] (II) intel(0): EDID for output DP1
[ 6.386] (II) intel(0): Output eDP1 connected
[ 6.386] (II) intel(0): Output VGA1 connected
[ 6.386] (II) intel(0): Output HDMI1 disconnected
[ 6.386] (II) intel(0): Output DP1 disconnected
[ 6.386] (II) intel(0): Using user preference for initial modes
[ 6.386] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 6.386] (II) intel(0): Output VGA1 using initial mode 1920x1200_60.00
[ 6.386] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.386] (**) intel(0): Display dimensions: (290, 160) mm
[ 6.386] (**) intel(0): DPI set to (336, 190)
[ 6.386] (II) Loading sub module "dri2"
[ 6.386] (II) LoadModule: "dri2"
[ 6.387] (II) Module "dri2" already built-in
[ 6.387] (==) Depth 24 pixmap format is 32 bpp
[ 6.387] (II) intel(0): SNA initialized with IvyBridge backend
[ 6.387] (==) intel(0): Backing store disabled
[ 6.387] (==) intel(0): Silken mouse enabled
[ 6.387] (II) intel(0): HW Cursor enabled
[ 6.387] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.388] (==) intel(0): DPMS enabled
[ 6.388] (II) intel(0): [DRI2] Setup complete
[ 6.388] (II) intel(0): [DRI2] DRI driver: i965
[ 6.388] (II) intel(0): direct rendering: DRI2 Enabled
[ 6.388] (WW) intel(0): Option "PreferredMode" is not used
[ 6.388] (WW) intel(0): Option "Primary" is not used
[ 6.388] (WW) intel(0): Option "Position" is not used
[ 6.388] (==) intel(0): hotplug detection: "enabled"
[ 6.388] (--) RandR disabled
[ 6.410] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 6.410] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 6.410] (II) AIGLX: enabled GLX_ARB_create_context
[ 6.410] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 6.410] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 6.410] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 6.410] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 6.410] (II) AIGLX: Loaded and initialized i965
[ 6.410] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.411] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 6.500] (II) intel(0): switch to mode 1920x1200 on crtc 5 (pipe 1)
[ 6.663] (II) intel(0): Setting screen physical size to 1016 x 317
[ 6.703] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 6.703] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.703] (II) LoadModule: "evdev"
[ 6.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.706] (II) Module evdev: vendor="X.Org Foundation"
[ 6.706] compiled for 1.13.0, module version = 2.7.3
[ 6.706] Module class: X.Org XInput Driver
[ 6.706] ABI class: X.Org XInput driver, version 18.0
[ 6.706] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.706] (**) Video Bus: always reports core events
[ 6.706] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 6.706] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.706] (--) evdev: Video Bus: Found keys
[ 6.706] (II) evdev: Video Bus: Configuring as keyboard
[ 6.706] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input10/event10"
[ 6.706] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 6.706] (**) Option "xkb_rules" "evdev"
[ 6.706] (**) Option "xkb_model" "evdev"
[ 6.706] (**) Option "xkb_layout" "us"
[ 6.732] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event3)
[ 6.732] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 6.732] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[ 6.732] (**) Sony Vaio Keys: always reports core events
[ 6.732] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event3"
[ 6.732] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[ 6.732] (--) evdev: Sony Vaio Keys: Found keys
[ 6.732] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[ 6.732] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input3/event3"
[ 6.732] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7)
[ 6.732] (**) Option "xkb_rules" "evdev"
[ 6.732] (**) Option "xkb_model" "evdev"
[ 6.732] (**) Option "xkb_layout" "us"
[ 6.732] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event4)
[ 6.732] (II) No input driver specified, ignoring this device.
[ 6.732] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[ 6.733] (II) No input driver specified, ignoring this device.
[ 6.733] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.733] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.733] (II) Using input driver 'evdev' for 'Power Button'
[ 6.733] (**) Power Button: always reports core events
[ 6.733] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 6.733] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.733] (--) evdev: Power Button: Found keys
[ 6.733] (II) evdev: Power Button: Configuring as keyboard
[ 6.733] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 6.733] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 6.733] (**) Option "xkb_rules" "evdev"
[ 6.733] (**) Option "xkb_model" "evdev"
[ 6.733] (**) Option "xkb_layout" "us"
[ 6.733] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 6.733] (II) No input driver specified, ignoring this device.
[ 6.733] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.734] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 6.734] (II) No input driver specified, ignoring this device.
[ 6.734] (II) This device may have been added with another device file.
[ 6.734] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[ 6.734] (II) No input driver specified, ignoring this device.
[ 6.734] (II) This device may have been added with another device file.
[ 6.735] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 6.735] (II) No input driver specified, ignoring this device.
[ 6.735] (II) This device may have been added with another device file.
[ 6.735] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 6.735] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.735] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 6.735] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.735] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 6.735] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 6.735] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 6.735] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 6.735] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 6.735] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 6.735] (**) Option "xkb_rules" "evdev"
[ 6.735] (**) Option "xkb_model" "evdev"
[ 6.735] (**) Option "xkb_layout" "us"
[ 6.736] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 6.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 6.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 6.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 6.736] (II) LoadModule: "synaptics"
[ 6.737] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 6.738] (II) Module synaptics: vendor="X.Org Foundation"
[ 6.738] compiled for 1.13.0, module version = 1.6.2
[ 6.738] Module class: X.Org XInput Driver
[ 6.738] ABI class: X.Org XInput driver, version 18.0
[ 6.738] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 6.738] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 6.738] (**) Option "Device" "/dev/input/event9"
[ 6.740] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5768
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4758
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 6.740] (**) Option "FingerLow" "35"
[ 6.740] (**) Option "FingerHigh" "45"
[ 6.740] (**) Option "ClickPad" "true"
[ 6.740] (**) Option "EmulateMidButtonTime" "0"
[ 6.740] (**) Option "HorizTwoFingerScroll" "on"
[ 6.740] (**) Option "TapButton1" "1"
[ 6.740] (**) Option "TapButton2" "2"
[ 6.740] (**) Option "TapButton3" "3"
[ 6.740] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 6.740] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 6.740] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 6.740] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 6.741] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 6.741] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 6.741] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 6.741] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 6.742] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 6.742] (II) No input driver specified, ignoring this device.
[ 6.742] (II) This device may have been added with another device file.
[ 6.742] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 6.742] (II) No input driver specified, ignoring this device.
[ 6.742] (II) This device may have been added with another device file.
[ 6.747] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 21764432
[ 6.747] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 6.747] failed to find screen to remove
[ 6.747] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.747] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1 0
[ 6.747] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 0
[ 6.747] (II) config/udev: removing device Video Bus
[ 6.773] (II) evdev: Video Bus: Close
[ 6.773] (II) UnloadModule: "evdev"
[ 6.773] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 6.773] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.773] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.773] (**) Video Bus: always reports core events
[ 6.773] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 6.773] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.773] (--) evdev: Video Bus: Found keys
[ 6.773] (II) evdev: Video Bus: Configuring as keyboard
[ 6.773] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input10/event10"
[ 6.773] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 6.773] (**) Option "xkb_rules" "evdev"
[ 6.773] (**) Option "xkb_model" "evdev"
[ 6.773] (**) Option "xkb_layout" "us"
[ 6.774] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-1 0
[ 6.774] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-1 0
[ 7.569] (II) config/udev: Adding input device USB2.0 Camera (/dev/input/event11)
[ 7.569] (**) USB2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 7.569] (II) Using input driver 'evdev' for 'USB2.0 Camera'
[ 7.569] (**) USB2.0 Camera: always reports core events
[ 7.569] (**) evdev: USB2.0 Camera: Device: "/dev/input/event11"
[ 7.569] (--) evdev: USB2.0 Camera: Vendor 0x5ca Product 0x18c6
[ 7.569] (--) evdev: USB2.0 Camera: Found keys
[ 7.569] (II) evdev: USB2.0 Camera: Configuring as keyboard
[ 7.569] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11/event11"
[ 7.569] (II) XINPUT: Adding extended input device "USB2.0 Camera" (type: KEYBOARD, id 11)
[ 7.569] (**) Option "xkb_rules" "evdev"
[ 7.569] (**) Option "xkb_model" "evdev"
[ 7.569] (**) Option "xkb_layout" "us"
[ 24.939] (II) intel(0): EDID vendor "MS_", prod id 37
[ 24.939] (II) intel(0): Using hsync ranges from config file
[ 24.939] (II) intel(0): Using vrefresh ranges from config file
[ 24.939] (II) intel(0): Printing DDC gathered Modelines:
[ 24.939] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 24.939] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 24.939] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 24.989] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 25.055] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.055] (II) intel(0): Using hsync ranges from config file
[ 25.055] (II) intel(0): Using vrefresh ranges from config file
[ 25.055] (II) intel(0): Printing DDC gathered Modelines:
[ 25.055] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.055] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.055] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.150] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.150] (II) intel(0): Using hsync ranges from config file
[ 25.150] (II) intel(0): Using vrefresh ranges from config file
[ 25.150] (II) intel(0): Printing DDC gathered Modelines:
[ 25.150] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.150] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.150] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.274] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.274] (II) intel(0): Using hsync ranges from config file
[ 25.274] (II) intel(0): Using vrefresh ranges from config file
[ 25.274] (II) intel(0): Printing DDC gathered Modelines:
[ 25.274] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.274] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.274] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.387] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.387] (II) intel(0): Using hsync ranges from config file
[ 25.387] (II) intel(0): Using vrefresh ranges from config file
[ 25.387] (II) intel(0): Printing DDC gathered Modelines:
[ 25.387] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.387] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.387] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.518] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.518] (II) intel(0): Using hsync ranges from config file
[ 25.518] (II) intel(0): Using vrefresh ranges from config file
[ 25.518] (II) intel(0): Printing DDC gathered Modelines:
[ 25.518] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.518] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.518] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.676] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.676] (II) intel(0): Using hsync ranges from config file
[ 25.676] (II) intel(0): Using vrefresh ranges from config file
[ 25.676] (II) intel(0): Printing DDC gathered Modelines:
[ 25.676] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.676] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.676] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 29.373] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/mouse2)
[ 29.373] (II) No input driver specified, ignoring this device.
[ 29.373] (II) This device may have been added with another device file.
[ 29.373] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/event12)
[ 29.373] (**) Bluetooth Laser Travel Mouse: Applying InputClass "evdev pointer catchall"
[ 29.373] (II) Using input driver 'evdev' for 'Bluetooth Laser Travel Mouse'
[ 29.373] (**) Bluetooth Laser Travel Mouse: always reports core events
[ 29.373] (**) evdev: Bluetooth Laser Travel Mouse: Device: "/dev/input/event12"
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Vendor 0x46d Product 0xb008
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found 12 mouse buttons
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found scroll wheel(s)
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found relative axes
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found x and y relative axes
[ 29.374] (II) evdev: Bluetooth Laser Travel Mouse: Configuring as mouse
[ 29.374] (II) evdev: Bluetooth Laser Travel Mouse: Adding scrollwheel support
[ 29.374] (**) evdev: Bluetooth Laser Travel Mouse: YAxisMapping: buttons 4 and 5
[ 29.374] (**) evdev: Bluetooth Laser Travel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.374] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:33/input12/event12"
[ 29.374] (II) XINPUT: Adding extended input device "Bluetooth Laser Travel Mouse" (type: MOUSE, id 12)
[ 29.374] (II) evdev: Bluetooth Laser Travel Mouse: initialized for relative axes.
[ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) keeping acceleration scheme 1
[ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) acceleration profile 0
[ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) acceleration factor: 2.000
[ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) acceleration threshold: 4
[ 589.381] (II) intel(0): EDID vendor "MS_", prod id 37
[ 589.381] (II) intel(0): Using hsync ranges from config file
[ 589.381] (II) intel(0): Using vrefresh ranges from config file
[ 589.381] (II) intel(0): Printing DDC gathered Modelines:
[ 589.381] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 589.381] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 589.381] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 589.433] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 1442.644] (II) intel(0): EDID vendor "MS_", prod id 37
[ 1442.644] (II) intel(0): Using hsync ranges from config file
[ 1442.644] (II) intel(0): Using vrefresh ranges from config file
[ 1442.644] (II) intel(0): Printing DDC gathered Modelines:
[ 1442.644]Hey all,
Here is the issue:
I have sony svz13114gxx laptop with xfce4 DE, i just tried to hook up external vga monitor to laptop and everything configures right with this run in normal session:
[code]
xrandr --output eDP1 --mode 1920x1080
xrandr --newmode "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync
xrandr --addmode VGA1 1920x1200_60.00
xrandr --output VGA1 --mode 1920x1200_60.00
xrandr --output VGA1 --left-of eDP1
[/code]
Obviously when i reboot this is not persistent, so then i put this stuff in my /etc/X11/xorg.conf.d/20-intel.conf:
[code]
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
Option "monitor-eDP1" "eDP1"
Option "monitor-VGA1" "VGA1"
EndSection
Section "Monitor"
Identifier "VGA1"
Modeline "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -HSync +VSync
Option "PreferredMode" "1920x1200_60.00"
EndSection
Section "Monitor"
Identifier "eDP1"
Option "PreferredMode" "1920x1080"
Option "Primary" "true"
Option "Position" "1920 0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Graphics"
Monitor "eDP1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection[/code]
This is where the problems start. On reboot Slim desktop manager seems to be stretched properly across the two monitors, but the I login and the display switches back to being mirrored, my xfce gtk2 theme is disabled in favor of somee default looking one, my icons are back to default, and none of my custom keyboard shorcuts work.
I can then use xrandr to get the displays in extended mode again, but the themes and icons etc do not revert. And on reboot, i have the same issue.
I have tried the sourcing ~/.xprofile, ~/.xinitrc, and ~/.config.xfce4/xinitrc routes, putting the xrandr cammands above the exec lines and that doesn't even enable VGA1.
I have been to all these places
[code]
https://wiki.ubuntu.com/X/Config/Resolution#Xrandr_Graphical_Front_End_GUI
http://ilkinbalkanay.blogspot.com/2008/01/extended-desktop-configuration-with.html
https://bbs.archlinux.org/viewtopic.php?id=98747
https://www.google.com/search?q=arch%20xrandr&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np
https://wiki.archlinux.org/index.php/Execute_commands_after_X_start
http://intellinuxgraphics.org/dualhead.html
http://mac.linux.be/content/setting-xorgconf-manually-xrandr#3
https://www.google.com/search?q=arch%20dual%20monitors%20The%20last%20active%20output%20must%20not%20be%20disabled%2C%20the%20system%20would%20be%20unusable.&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np#hl=en&safe=off&client=firefox-a&tbo=d&rls=org.mozilla:en-US%3Aofficial&channel=np&sclient=psy-ab&q=xfce+%22Selected+output+not+disabled%22&oq=xfce+%22Selected+output+not+disabled%22&gs_l=serp.3...1694.1694.3.2205.1.1.0.0.0.0.97.97.1.1.0.les%3Bcrnk_timediscounta..0.0...1c.1.O4EDj7DaWlA&pbx=1&fp=1&bpcl=39468505&biw=984&bih=936&cad=b&sei=aKC_UIKvJ6GA0AGTg4HwBg&sei=FKS_UMuwJdPU0gHorICQBA&bav=on.2,or.r_gc.r_pw.r_qf.&sei=2MK_UOaAJ5Ph0wGbsoHICg
https://wiki.archlinux.org/index.php/Xfce#Customizing_Startup_Applications
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html
https://wiki.archlinux.org/index.php/Xorg#Monitor_settings
[/code]
Even after much research, still no luck.
this might be useful:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631225
Anyone have any ideas?
here is my Xorg0.log
[code]
[ 3.490]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 3.490] X Protocol Version 11, Revision 0
[ 3.490] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 3.490] Current Operating System: Linux tcz 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012 x86_64
[ 3.490] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d23251af-35fa-426b-a7d5-5aa2f0a5b87d ro quiet pcie_aspm=force i915.i915_enable_rc6=1
[ 3.490] Build Date: 08 November 2012 07:09:29PM
[ 3.490]
[ 3.490] Current version of pixman: 0.28.0
[ 3.490] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.490] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.490] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 5 16:25:21 2012
[ 3.492] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.494] (==) No Layout section. Using the first Screen section.
[ 3.494] (**) |-->Screen "Default Screen" (0)
[ 3.494] (**) | |-->Monitor "eDP1"
[ 3.494] (**) | |-->Device "Intel Graphics"
[ 3.494] (==) Automatically adding devices
[ 3.494] (==) Automatically enabling devices
[ 3.494] (==) Automatically adding GPU devices
[ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.504] Entry deleted from font path.
[ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.504] Entry deleted from font path.
[ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.504] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 3.504] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.504] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.504] (II) Loader magic: 0x7fcc40
[ 3.504] (II) Module ABI versions:
[ 3.504] X.Org ANSI C Emulation: 0.4
[ 3.504] X.Org Video Driver: 13.1
[ 3.504] X.Org XInput driver : 18.0
[ 3.504] X.Org Server Extension : 7.0
[ 3.505] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.276] (--) PCI:*(0:0:2:0) 8086:0166:104d:90a5 rev 9, Mem @ 0xd7000000/4194304, 0xc0000000/268435456, I/O @ 0x00009000/64
[ 6.276] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.276] Initializing built-in extension Generic Event Extension
[ 6.276] Initializing built-in extension SHAPE
[ 6.276] Initializing built-in extension MIT-SHM
[ 6.276] Initializing built-in extension XInputExtension
[ 6.276] Initializing built-in extension XTEST
[ 6.276] Initializing built-in extension BIG-REQUESTS
[ 6.276] Initializing built-in extension SYNC
[ 6.276] Initializing built-in extension XKEYBOARD
[ 6.276] Initializing built-in extension XC-MISC
[ 6.276] Initializing built-in extension SECURITY
[ 6.276] Initializing built-in extension XINERAMA
[ 6.276] Initializing built-in extension XFIXES
[ 6.276] Initializing built-in extension RENDER
[ 6.276] Initializing built-in extension RANDR
[ 6.276] Initializing built-in extension COMPOSITE
[ 6.276] Initializing built-in extension DAMAGE
[ 6.276] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.276] Initializing built-in extension DOUBLE-BUFFER
[ 6.276] Initializing built-in extension RECORD
[ 6.276] Initializing built-in extension DPMS
[ 6.276] Initializing built-in extension X-Resource
[ 6.276] Initializing built-in extension XVideo
[ 6.276] Initializing built-in extension XVideo-MotionCompensation
[ 6.276] Initializing built-in extension XFree86-VidModeExtension
[ 6.276] Initializing built-in extension XFree86-DGA
[ 6.276] Initializing built-in extension XFree86-DRI
[ 6.276] Initializing built-in extension DRI2
[ 6.276] (II) LoadModule: "glx"
[ 6.278] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.281] (II) Module glx: vendor="X.Org Foundation"
[ 6.281] compiled for 1.13.0, module version = 1.0.0
[ 6.281] ABI class: X.Org Server Extension, version 7.0
[ 6.281] (==) AIGLX enabled
[ 6.281] Loading extension GLX
[ 6.281] (II) LoadModule: "intel"
[ 6.281] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 6.285] (II) Module intel: vendor="X.Org Foundation"
[ 6.285] compiled for 1.13.0.901, module version = 2.20.14
[ 6.285] Module class: X.Org Video Driver
[ 6.285] ABI class: X.Org Video Driver, version 13.1
[ 6.285] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 6.286] (++) using VT number 7
[ 6.288] (II) intel(0): using device path '/dev/dri/card0'
[ 6.288] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 6.288] (==) intel(0): RGB weight 888
[ 6.288] (==) intel(0): Default visual is TrueColor
[ 6.288] (**) intel(0): Option "AccelMethod" "sna"
[ 6.288] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 6.289] (**) intel(0): Framebuffer tiled
[ 6.289] (**) intel(0): Pixmaps tiled
[ 6.289] (**) intel(0): 3D buffers tiled
[ 6.289] (**) intel(0): Throttling enabled
[ 6.289] (**) intel(0): Delayed flush enabled
[ 6.289] (**) intel(0): "Tear free" disabled
[ 6.289] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 6.289] (II) intel(0): Output eDP1 using monitor section eDP1
[ 6.289] (**) intel(0): Option "PreferredMode" "1920x1080"
[ 6.289] (**) intel(0): Option "Position" "1920 0"
[ 6.289] (**) intel(0): Option "Primary" "true"
[ 6.289] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 6.293] (II) intel(0): Output VGA1 using monitor section VGA1
[ 6.293] (**) intel(0): Option "PreferredMode" "1920x1200_60.00"
[ 6.294] (II) intel(0): Output HDMI1 has no monitor section
[ 6.336] (II) intel(0): Output DP1 has no monitor section
[ 6.337] (II) intel(0): EDID for output eDP1
[ 6.337] (II) intel(0): Manufacturer: MS_ Model: 25 Serial#: 16843009
[ 6.337] (II) intel(0): Year: 2012 Week: 24
[ 6.337] (II) intel(0): EDID Version: 1.4
[ 6.337] (II) intel(0): Digital Display Input
[ 6.337] (II) intel(0): 8 bits per channel
[ 6.337] (II) intel(0): Digital interface is DisplayPort
[ 6.337] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 6.337] (II) intel(0): Gamma: 2.20
[ 6.337] (II) intel(0): No DPMS capabilities specified
[ 6.337] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 6.337] (II) intel(0): First detailed timing is preferred mode
[ 6.337] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 6.337] (II) intel(0): redX: 0.602 redY: 0.336 greenX: 0.296 greenY: 0.546
[ 6.337] (II) intel(0): blueX: 0.148 blueY: 0.126 whiteX: 0.313 whiteY: 0.329
[ 6.337] (II) intel(0): Manufacturer's mask: 0
[ 6.337] (II) intel(0): Supported standard timings:
[ 6.337] (II) intel(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 6.337] (II) intel(0): Supported detailed timing:
[ 6.337] (II) intel(0): clock: 162.8 MHz Image Size: 291 x 164 mm
[ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2481 h_border: 0
[ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 6.337] (II) intel(0): Supported detailed timing:
[ 6.337] (II) intel(0): clock: 99.9 MHz Image Size: 291 x 164 mm
[ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2281 h_border: 0
[ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 6.337] (II) intel(0): Monitor name: Sony LCD
[ 6.337] (II) intel(0): Ranges: V min: 39 V max: 61 Hz, H min: 43 H max: 66 kHz, PixClock max 175 MHz
[ 6.337] (II) intel(0): EDID (in hex):
[ 6.337] (II) intel(0): 00ffffffffffff00367f250001010101
[ 6.337] (II) intel(0): 18160104a51d1078020f159a564b8b26
[ 6.337] (II) intel(0): 205054000000d1c00101010101010101
[ 6.337] (II) intel(0): 0101010101019c3f803172380f402020
[ 6.337] (II) intel(0): 330023a4100000180727806971380f40
[ 6.337] (II) intel(0): 2020330023a410000018000000fc0053
[ 6.337] (II) intel(0): 6f6e79204c43440a20202020000000fd
[ 6.337] (II) intel(0): 00273d2b4211000a2020202020200013
[ 6.337] (II) intel(0): EDID vendor "MS_", prod id 37
[ 6.337] (II) intel(0): Using EDID range info for horizontal sync
[ 6.337] (II) intel(0): Using EDID range info for vertical refresh
[ 6.337] (II) intel(0): Printing DDC gathered Modelines:
[ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 6.337] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 6.337] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 6.337] (II) intel(0): Printing probed modes for output eDP1
[ 6.337] (II) intel(0): Modeline "1920x1080"x59.9 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz UeP)
[ 6.337] (II) intel(0): Modeline "1920x1080"x40.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 6.338] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 6.338] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 6.338] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 6.338] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.338] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.338] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 6.338] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 6.338] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.338] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 6.338] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 6.338] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 6.343] (II) intel(0): EDID for output VGA1
[ 6.343] (II) intel(0): Printing probed modes for output VGA1
[ 6.343] (II) intel(0): Modeline "1920x1200_60.00"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz UP)
[ 6.343] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.344] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.344] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.344] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 6.344] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 6.344] (II) intel(0): EDID for output HDMI1
[ 6.386] (II) intel(0): EDID for output DP1
[ 6.386] (II) intel(0): Output eDP1 connected
[ 6.386] (II) intel(0): Output VGA1 connected
[ 6.386] (II) intel(0): Output HDMI1 disconnected
[ 6.386] (II) intel(0): Output DP1 disconnected
[ 6.386] (II) intel(0): Using user preference for initial modes
[ 6.386] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 6.386] (II) intel(0): Output VGA1 using initial mode 1920x1200_60.00
[ 6.386] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.386] (**) intel(0): Display dimensions: (290, 160) mm
[ 6.386] (**) intel(0): DPI set to (336, 190)
[ 6.386] (II) Loading sub module "dri2"
[ 6.386] (II) LoadModule: "dri2"
[ 6.387] (II) Module "dri2" already built-in
[ 6.387] (==) Depth 24 pixmap format is 32 bpp
[ 6.387] (II) intel(0): SNA initialized with IvyBridge backend
[ 6.387] (==) intel(0): Backing store disabled
[ 6.387] (==) intel(0): Silken mouse enabled
[ 6.387] (II) intel(0): HW Cursor enabled
[ 6.387] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.388] (==) intel(0): DPMS enabled
[ 6.388] (II) intel(0): [DRI2] Setup complete
[ 6.388] (II) intel(0): [DRI2] DRI driver: i965
[ 6.388] (II) intel(0): direct rendering: DRI2 Enabled
[ 6.388] (WW) intel(0): Option "PreferredMode" is not used
[ 6.388] (WW) intel(0): Option "Primary" is not used
[ 6.388] (WW) intel(0): Option "Position" is not used
[ 6.388] (==) intel(0): hotplug detection: "enabled"
[ 6.388] (--) RandR disabled
[ 6.410] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 6.410] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 6.410] (II) AIGLX: enabled GLX_ARB_create_context
[ 6.410] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 6.410] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 6.410] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 6.410] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 6.410] (II) AIGLX: Loaded and initialized i965
[ 6.410] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.411] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 6.500] (II) intel(0): switch to mode 1920x1200 on crtc 5 (pipe 1)
[ 6.663] (II) intel(0): Setting screen physical size to 1016 x 317
[ 6.703] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 6.703] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.703] (II) LoadModule: "evdev"
[ 6.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.706] (II) Module evdev: vendor="X.Org Foundation"
[ 6.706] compiled for 1.13.0, module version = 2.7.3
[ 6.706] Module class: X.Org XInput Driver
[ 6.706] ABI class: X.Org XInput driver, version 18.0
[ 6.706] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.706] (**) Video Bus: always reports core events
[ 6.706] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 6.706] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.706] (--) evdev: Video Bus: Found keys
[ 6.706] (II) evdev: Video Bus: Configuring as keyboard
[ 6.706] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input10/event10"
[ 6.706] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 6.706] (**) Option "xkb_rules" "evdev"
[ 6.706] (**) Option "xkb_model" "evdev"
[ 6.706] (**) Option "xkb_layout" "us"
[ 6.732] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event3)
[ 6.732] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 6.732] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[ 6.732] (**) Sony Vaio Keys: always reports core events
[ 6.732] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event3"
[ 6.732] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[ 6.732] (--) evdev: Sony Vaio Keys: Found keys
[ 6.732] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[ 6.732] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input3/event3"
[ 6.732] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7)
[ 6.732] (**) Option "xkb_rules" "evdev"
[ 6.732] (**) Option "xkb_model" "evdev"
[ 6.732] (**) Option "xkb_layout" "us"
[ 6.732] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event4)
[ 6.732] (II) No input driver specified, ignoring this device.
[ 6.732] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[ 6.733] (II) No input driver specified, ignoring this device.
[ 6.733] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.733] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.733] (II) Using input driver 'evdev' for 'Power Button'
[ 6.733] (**) Power Button: always reports core events
[ 6.733] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 6.733] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.733] (--) evdev: PowerHave you ever tried 'arandr'? It's a GUI for xrandr; it could be useful.
I used this config with nouveau, now I've successfully created my xorg.conf with nvidia blobs, but this one worked~
Section "Device"
Identifier "NVIDIA GeForce GT320"
Driver "nouveau"
Option "Monitor-DVI-I-1" "BENQ G2450"
Option "Monitor-HDMI-1" "LG W2442PA"
EndSection
Section "Monitor"
Identifier "BENQ G2450"
Option "Primary" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "1080 612"
EndSection
Section "Monitor"
Identifier "LG W2442PA"
Option "LeftOf" "BENQ G2450"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "59.9"
Option "Position" "0 0"
Option "Rotate" "Left"
EndSection
Section "Screen"
Identifier "Primary Screen"
Device "NVIDIA GeForce GT320"
Monitor "BENQ G2450"
DefaultDepth 24
SubSection "Display"
Depth 24
Virtual 3000 1920
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Primary Screen"
EndSection
I'm using XFCE as well, 2 monitors, the left one rotated 90º. The main difference it's that I've the 'Virtual' option inside 'SubSection'; not sure if it's relevant. -
Not sure if this is something that I've read about already somewhere, but I've been spinning my wheels a bit trying to come up with a better solution.
In most of my GridViews, I have already modified them a fair amount (added extra data by looping through the gridview rows in the OnPreRender) so while I was there, I assigned the column image URLs inside the code there using the NPBasePage.ThemesPath call.
I've come to the Saved Lists page and I'd be okay with just modifying it to have my theme path's add/remove images, but seems there must be a better way than looping through the gridview and changing it there. Now that I think about it though, it seems to be doing some processing regardless of what you assign to the ImageUrl in the item template which is probably why I had ended up doing it inside that loop to begin with.
Is there a better way of doing this?
Thanks.I'm not sure if I fully understand what you're trying to do .. but instead of your code looping over the gridview I normally add my control in the ItemTemplate itself and it will get called for each row in the grid. The event you decide to run your code in is still up to you.
Have you tried just naming the icons with the same name in your theme folder? WebTools supports a dynamic image lookup so for example if there is an image "add.gif" that is currently in the assets/common/buttons folder, if you create your own image called add.gif and place it in your theme folder, WebTools should use this one automatically. This works in some places .. but I'm not sure if it is missing from some pages. -
[oblogout] theme-icon builder script
hi to everybody,
today i share with the community my script
very very basic script which it does only one thing: save time when adapt oblogout icon to system icon (in my case gnome-colors, but it should work with some trick for every icon theme)
#!/bin/bash
# requirement: librsvg, geany, gnome-colors-icon-theme
# created by mattia.b89 <mattia DOT b89 AT gmail DOT com>
# based on "forger" command <http://ubuntuforums.org/showthread.php?p=5131769>
TEMP_DIR=/tmp/WIP
HEIGHT=128
WIDTH=128
EDITOR=geany
CONVERTER=rsvg-convert
mkdir $TEMP_DIR
cd /usr/share/icons/gnome-colors-common/scalable/actions
cp system-lock-screen.svg $TEMP_DIR/
cp application-exit.svg $TEMP_DIR/
cp view-refresh.svg $TEMP_DIR/
cp process-stop.svg $TEMP_DIR/
cd /usr/share/icons/gnome-colors-common/scalable/apps
cp gnome-session-suspend.svg $TEMP_DIR/
cp gnome-session-hibernate.svg $TEMP_DIR/
cp gnome-shutdown.svg $TEMP_DIR/
cp gnome-session-switch.svg $TEMP_DIR/
cd $TEMP_DIR
for i in *; do $CONVERTER $i -w $WIDTH -h $HEIGHT -o `echo $i | sed -e 's/svg$/png/'`; done
mv system-lock-screen.png lock.png
mv application-exit.png logout.png
mv view-refresh.png restart.png
mv process-stop.png cancel.png
mv gnome-session-suspend.png suspend.png
mv gnome-session-hibernate.png hibernate.png
mv gnome-shutdown.png shutdown.png
mv gnome-session-switch.png switch.png
sudo mkdir -pv /usr/share/themes/gnome-colors/oblogout
sudo cp -v *.png /usr/share/themes/gnome-colors/oblogout/
rm -rf $TEMP_DIR
sudo $EDITOR /etc/oblogout.confHi,
Downside of that approach might be also on 11g that apxldimg script backup whole old image folder.
So after doing that few times you have quite lot of backups there consuming space.
Also, if you like have some custom folders, those are not transferred by script as I understand.
This is what I have find out on XE.
Do not know if 11g is different and have not check content of apxldimg,
does it do something special if database edition is XE.
Regards,
Jari
Edited by: jarola on Jan 19, 2011 4:27 PM
You might like check this post to replace just single file
Re: Replace 10g XE License agreement page
Do not know does it work on 11g -
Upgrade of gtk2-2.12.0 to gtk2-2.12.1 creates theme icon problems
Running pacman -Su caused gtk2 to be upgraded from 2.12.0 to 2.12.1. After the system update many of the button icons in Rhythmbox were missing. Running Rhythmbox from a console showed errors regarding an inability to access specific themed icons. Also, Nitrogen would not run, with the console showing the error:
terminate called after throwing an instance of 'Gtk::IconThemeError'
Aborted
I downgraded gtk2 back to 2.12.1. I also downgraded gtkmm (2.12.1 to 2.10.10) due to dependency on gtk2. This corrected both issues above.You should do this steps after the upgrade , when you will run pre-upgrade check script (preupgrd.sql ) script , it will tell you what action is needed for DST as well other pre-requirements for upgrade.
If you have MOS access you can refer ti below document for more details:
Actions For DST Updates When Upgrading To Or Applying The 12.1.0.2 Patchset (Doc ID 1665676.1)
Regards
Sudhir -
Icon (mime objects) not getting displayed in Integrated ITS
Hi all,
We have activated integrated ITS. Created service in SICF but the ICONS of Buttons are not shown. Also we cannot click any button to start the action.
Please advise.
Regards,
FSHi FS,
The Mime Types in SAP Its Integrated are on this path: /sap/public/bc/its/mimes/
You can reference your icon with the URL: http://host:port/sap/public/bc/its/mimes/service/theme/icon.gif
If you have the icon of theme 99 in the SE80 Internet Service and your icon name is square.gif, and your service name is ZSERVICE, the call are:
HTMLB:
img src="/sap/public/bc/its/mimes/ZSERVICE/99/square.gif" between symbols "<" and ">"
URL in the Explorer:
http://host:port/sap/public/bc/its/mimes/ZSERVICE/99/square.gif
Hope it´s help.
Best Regards.
Edited by: Alberto Ruiz on Apr 8, 2009 4:02 PM -
Complete Nokia Theme did not install - how to fix?
I have two N8 phones.
On my first N8, I did the Anna update. I now have two sets of "midnight" themes on this phone, one set that looks like it did before, and one set that has a symbol at the right of the theme name that sort of looks like a coffee cup. For the themes with the "coffee cup" symbol to the right of the theme name, all the theme icons have been modified to something a bit fancier than the original.
What does the "coffee cup" symbol mean?
My newest N8 was recently updated to Anna. It only has the old-style themes named "midnight color-name". The icons for the themes still look like they did before the Anna update.
How can I get this fancier theme icons on my other N8? If it's simply a matter of downloading the new, full and complete Nokia "midnight" themes for the N8 phone with Anna, where do I go to get them? I've searched all over, and found lots of "midnight" themes, but not the ones I'm looking for (which apparently were installed on one of my phones as part of the Anna Update.@Mike_Myers_N8
Doesn't "coffee cup" icon just mean stored upon E:\ Mass Memory?
Happy to have helped forum with a Support Ratio = 42.5 -
Firefox 21 is not showing theme preview images
In Firefox 21 for Mac OS, there is no longer any preview image, which is usually a little screenshot of the left end of the toolbar, shown for a theme when you click the "More" link to get more information about the theme. The only image there now is the theme icon. Where did that preview go and why is it gone? The preview images are still in the .jar files in all the themes I have, so they are still available.
Try to delete the addons.sqlite file in the Firefox profile folder.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder
It is also possible that there is a problem with the file(s) that store the extensions registry.
Delete the extensions.* files (e.g. extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left end side of the Search Bar ("Find Updates" button in older Firefox versions) to check if there is a compatibility update available. -
[Xorg 7.0] Changing Cursor Theme
Hi guys, I used to change my cursor theme modifying /usr/X11R6/lib/X11/icons/default/.? (I don't remember the name of that file), what about Xorg 7.0?, where should I put my cursor theme, and where make it default?
Moo-Crumpus wrote:I don't have that folder, 2. Creating one and adding the files had no effects at all. Btw the mixture of xorg mouse cursors and themes, icons in one folder is really ugly.
i totally agree. and although strictly speaking i guess they *are* icons, wouldn't it have been better for X to specify them as cursors, e.g. in the index.theme, etc.?
>>edit: i put the icons in ~/.icons and added them to ~/.Xdefaults, and i get the right "busy" cursor while the desktop is loading. but then once it's loaded, they've reverted to the X default cursors again. so apparently something in xorg 7.0 is even overriding ~/.Xdefaults. -
Iphoto 6.0.4 - missing book themes
I hope someone can help me with this one.
Yesterday I upgraded to 10.4.7 from 10.3.? - I have never had any problem with iphoto until now. I can start a new book and choose a theme - BUT thre themes come up blank. crayon, baby girl and baby boy. I am a children's photographer and I use these three themes very often. If I create a new book I can select my theme at first, but then if I click on the themes icon from the book layout screen nothing happens. Also in the medium size theme choices these three themes are listed twice with no picture next to them. If I click on one of them a new book starts, but with nothing on the pages except grey photo boxes. All the cards, and calendar work fine.TabithaQ:
Welcome to the Apple Discussions. Did you repair disk permissions with Disk Utility after upgrading to 10.4.7? If not do so.
Do you Twango? -
Thunar without icons looks really bad, so I downloaded these and extracted them into the ~/.icons folder.
[flyer@athlon ~]$ vim ~/.gtkrc-2.0
# -- THEME AUTO-WRITTEN DO NOT EDIT
include "/home/flyer/.themes/LiNsta-GTK2/gtk-2.0/gtkrc"
include "/home/flyer/.gtkrc.mine"
# -- THEME AUTO-WRITTEN DO NOT EDIT
[flyer@athlon ~]$ vim ~/.gtkrc.mine
gtk-icon-theme-name = "Tango-Original"
[flyer@athlon ~]$ thunar
(thunar:10305): thunar-vfs-WARNING **: Failed to connect to the HAL daemon: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
(thunar:10305): Gtk-WARNING **: Could not find the icon 'gnome-fs-home'. The 'hicolor' theme
was not found either, perhaps you need to install it.
You can get a copy from:
http://icon-theme.freedesktop.org/releases
(thunar:10305): Gtk-WARNING **: Error loading theme icon 'gnome-fs-home' for stock: Icon 'gnome-fs-home' not present in theme
[flyer@athlon ~]$ vim ~/.gtkrc-2.0
(thunar:10305): Gtk-WARNING **: Error loading theme icon 'gnome-fs-home' for stock: Icon 'gnome-fs-home' not present in theme
What's with the HAL?
Thanks in advance.
EDIT:
There was something wrong with the theme, so I downloaded another one.
Last edited by F1y3r (2007-11-04 11:31:08)# DO NOT EDIT! This file will be overwritten by LXAppearance.
# Any customization should be done in ~/.gtkrc-2.0.mine instead.
gtk-theme-name="SlicknesS-black"
gtk-icon-theme-name="black-white_2-gloss"
gtk-font-name="Cantarell 11"
gtk-cursor-theme-size=0
gtk-toolbar-style=GTK_TOOLBAR_BOTH
gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
gtk-button-images=1
gtk-menu-images=1
gtk-enable-event-sounds=1
gtk-enable-input-feedback-sounds=1
gtk-xft-antialias=1
gtk-xft-hinting=1
gtk-xft-hintstyle="hintfull"
gtk-xft-rgba="rgb"
include "~/user/.gtkrc-2.0.mine"
As generated by lxappearance. Originally I had only the include line in .gtkrc-2.0 which I created myself but since that didn't work I tried lxappearance.
gtk-icon-theme-name = "black-white_2-gloss"
That's what I had in my .gtkrc-2.0.mine
(thunar:788): Gtk-WARNING **: Unable to locate theme engine in module_path: "ubuntulooks",
(thunar:788): Gtk-WARNING **: Unable to locate theme engine in module_path: "crux-engine",
Output of starting thunar in terminal. That's always been like that for every linux I've ever had though and it never affected the icons before.
As you can see, the icons are having an effect, but only on certain things. Also, I'm starting awesome with .xinitrc.
#!/bin/sh
# $Xorg: xinitrc.cpp,v 1.3 2000/08/17 19:54:30 cpqbld Exp $
userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap
exec xcompmgr &
# merge in defaults and keymaps
[ -f $sysresources ] && xrdb -merge $sysresources
[ -f $sysmodmap ] && xmodmap $sysmodmap
[ -f $userresources ] && xrdb -merge $userresources
[ -f $usermodmap ] && xmodmap $usermodmap
# Start the window manager:
if [ -z "$DESKTOP_SESSION" -a -x /usr/bin/ck-launch-session ]; then
ck-launch-session dbus-launch --exit-with-session awesome
else
awesome
fi
Last edited by xworld (2013-12-20 21:29:05) -
Change application's icons in Openbox
Hi,
I'm trying to change the icons of some common applications since three hours now. I set the icon-theme using lxappearance. It works for system icons like folders or different filetypes. But I remember, that the icons of applications like firefox or thunderbird changed too when i used one of the nuoveXT icon themes.
Is there a way to tell openbox and tint2 to use the themes icons?lxappearance controls the GTK settings. You just set the gtk icon-theme. Openbox does not have any bindings to GTK. I'm not sure which icons you are refering to, do you mean the icons in the menu you get when middle-clicking on the desktop? Or do you mean the icons in the applications themselves?
Applications get to set their own icon. Many programs will use a function call that makes sure it gets the icon from the users icon-theme, or a default icon in case it doesn't exist. However, the Mozilla programs don't use this function, they just select a fixed icon.
Then there is WM-specific menus. Openbox does not support icons in the "right-click" menu, but in the "middle-click" menu it will just grab whatever icon the program set for itself. Other WMs do it differnetly, GNOME for example: Its menus display .desktop files located at /usr/share/applications, and those .desktop files can specify an icon name that will be looked up in the users icon-theme. That explains how your icon theme affected the icon shown in the GNOME menu (assuming that's what you used to use) but not the icon in the panel or in the window title. -
Firefox Open File Dialog icons missing?
When Firefox calls the Open File Dialog the must majority of folders and files show up with the same white icon. How can I fix that?
gnome-icon-theme
gnome-icon-theme-symbolic
gtk-update-icon-cache
hicolor-icon-theme
icon-naming-utils
kdeartwork-emoticons
kdeartwork-iconthemes
kdepim-akonadiconsole
kdeplasma-addons-applets-icontasks
oxygen-icons
perl-gtk2-trayicon
Maybe you are looking for
-
Whenever I go to open up Adobe Photoshop (64bit or otherwise) it will load up for a second then crash the next. It doesnt give me error reason why only says it has stopped working and it can't detect a problem so it closes. I have tried to uninstall
-
Reports with subreports take longer to preview in Crystal 2008 Viewer
Previewing reports containing one or more subreports within a .NET application using the 2008 Windows Forms Crystal Report Viewer control takes much longer than running those same reports from the XI R2 viewer. This occurs because the report will ru
-
ABNAN- Asset Posting Captitalization
Dear All, I am try using ABNAN for changing the asset value. The asset was capitalized on 2013.09.08. After runing ABNAN, i enter Orig. Value date with 2014.06.08. It pops up the error message AA566. I want to know if the Orig. Value date must be in
-
Business Objects XI R3.1 Fix Pack 1.3 Release Notes
Hi All, What are the Prerequisites for BOXI R3.1 Fix Pack 1.3 installation? can i have release notes for Fix Pack 1.3 Release notes. Any help would be appreciated. Edited by: mahesh ch on Apr 7, 2009 4:15 PM
-
I am using a program called JVider, if anyone else out there is, I think they will be the most help. I was using the program just fine. BTW, it builds GUIs from a GUI. I like it, it takes some of the tedious work out for me, also I am not experienced